Related
I've been looking around for a louder volume hack for the Legend for a couple of days to no avail. I keep seeing things about DSP Manager but as far I'm aware there's nothing for the Legend specifically. Is there a specific package for the Legend to be installed or can I just flash any old DSP apk and be done with it?
If that's not the case, what can I do to achieve louder volume levels, apart from turning up the volume level?
- Swyped from my rooted HTC Legend -
Search for an app called "Louder Volume Hack" (pun not intended). There are settings in the app that is suppose to reconfigure your phone's volume. Tried it but can't tell the difference honestly. So what I did was I bought PowerAMP and tweak the equalizer settings instead. Of course that only works for music and I'm pretty sure that is what your purpose, innit?
rajasyaitan said:
Search for an app called "Louder Volume Hack" (pun not intended).
Click to expand...
Click to collapse
Louder Volume Hack only works on HTC devices released before the Nexus. The Legend was released after the Nexus.
So what I did was I bought PowerAMP and tweak the equalizer settings instead. Of course that only works for music and I'm pretty sure that is what your purpose, innit?
Click to expand...
Click to collapse
I've used PowerAMP's equaliser before but it can horribly distort the quality of the music playing. I also prefer Winamp to PowerAMP, so I can't use PowerAMP.
I'd just like a hack which I can fakeflash or flash.
I was just about to post another thread now for the same requirement. So i second this thread
To be honest, if I can't find a hack then I wouldn't mind creating my own... Provided someone tells me where to look I would be okay with that.
CyanogenMOD has the DSP stuff built in.
If this is anything like voodoo sound on the sammy devices (I'm not sure) then this kind of thing has to be done at kernel level. I have a feeling that BlaY0's kernel is pretty much the same as CM's, so logic dictates that DSPManager should work. Try installing the apk, see what happens. The setting that has the largest impact is "Dynamic Range Compression". If everything gets very loud when you turn it on, it worked.
I flashed DSP Manager and located the apk inside /system and attempted to install it, but it would not install. I also noticed DSP Manager's odex file sitting underneath it - could that be causing issues? Or something else?
- Swyped from my rooted HTC Legend -
DroidX 2.3.3 - Rooted via Pete's - LauncherPro
I bought EQUALIZER from SmartAndroidApps, and POWERAMP from MaxMP. Both do well with media audio, but neither can manipulate the telephone audio stream.
I'm hard of hearing, and would like to control telephone audio from the speaker. My current solution is external, using earbuds with a lump in the cable that houses a passive RC circuit to approximate the curve I need.
Is there an EQ app or method to do that internally, so I can use the speakerphone?
There once was a flashable zip called turn it to eleven that allowed you to exceed normal volume levels... maybe look around for that or something like it... if you are not rooted I don't think there are any options...
SGT+CM7=AWESOMENESS!!!
DSP manager came with cm7 and it works pretty good for me.
DX+CM7
marculous said:
DSP manager came with cm7 and it works pretty good for me.
DX+CM7
Click to expand...
Click to collapse
Works good for me on my x running CM7 too, however even at the loudest setting my ringtones still aren't more than 1 or 2 decibels louder than stock... wonder if there is a way to really increase volume?....
SGT+CM7= :-D
Poweramp app has a great one in its player idk if you can use it without using the player. It even has a pre amp.
Sent from my DROIDX using XDA App
hootowlserenade said:
Works good for me on my x running CM7 too, however even at the loudest setting my ringtones still aren't more than 1 or 2 decibels louder than stock... wonder if there is a way to really increase volume?....
SGT+CM7= :-D
Click to expand...
Click to collapse
Tried amplifying the sounds with something like wave pad or MP3 gain, then putting them back?
I always amplify mine with wave pad, then put them in the media folder of my sd card, that way I don't have to use root explorer every time to put them back in system sounds whenever I flash another nightly.
DX+CM7
marculous said:
Tried amplifying the sounds with something like wave pad or MP3 gain, then putting them back?
DX+CM7
Click to expand...
Click to collapse
Maybe I can do something like that... I'll look and see if I can find where the tunes are stored, maybe use root explorer to modify them, or something like that... I'll check around the forums a bit and see how to do that
SGT+CM7= :-D
hootowlserenade said:
Maybe I can do something like that... I'll look and see if I can find where the tunes are stored, maybe use root explorer to modify them, or something like that... I'll check around the forums a bit and see how to do that
SGT+CM7= :-D
Click to expand...
Click to collapse
Are they actual system sounds, or your own ringtones?
DX+CM7
marculous said:
Are they actual system sounds, or your own ringtones?
DX+CM7
Click to expand...
Click to collapse
System sounds
SGT+CM7= :-D
hootowlserenade said:
System sounds
SGT+CM7= :-D
Click to expand...
Click to collapse
using root explorer, they are in system/media/audio/ringtones. They are .ogg. You may have to convert them before amplifying them. I would rename them and put them on the sd card, in media/audio/ringtones. Wave pad may convert them, or free make. Both are free. Good luck, let me know how it goes, any questions just ask.
DX+CM7
marculous said:
using root explorer, they are in system/media/audio/ringtones. They are .ogg. You may have to convert them before amplifying them. I would rename them and put them on the sd card, in media/audio/ringtones. Wave pad may convert them, or free make. Both are free. Good luck, let me know how it goes, any questions just ask.
DX+CM7
Click to expand...
Click to collapse
Very cool I see the alarm tones too maybe now I'll actually hear the alarm going off... gonna copy these to sd and try to convert, increase volume, reconvert and save back into root explorer... wonder if I'll have to do this after each nightly? One way to find out.... after I suceed I will keep a copy of files on sd card just in case and I'll flash a nightly and see if it overwrites the files... will report back
SGT+CM7= :-D
hootowlserenade said:
Very cool I see the alarm tones too maybe now I'll actually hear the alarm going off... gonna copy these to sd and try to convert, increase volume, reconvert and save back into root explorer... wonder if I'll have to do this after each nightly? One way to find out.... after I suceed I will keep a copy of files on sd card just in case and I'll flash a nightly and see if it overwrites the files... will report back
SGT+CM7= :-D
Click to expand...
Click to collapse
Flashing nightly should overwrite them, I know it did with my ringtones, that's why I started just putting them on the sd. Overwrites boot animation too, I gave up on changing that every time.
DX+CM7
What I really need is to apply EQ to telephone (incoming voice) audio.
I can do it externally via the 3.5mm audio jack, using an active equalizer. Bulky. It would be great to do it inside the phone.
Phone Audio Equalizer
i would highly recomend the dsp manager because it equalizes your application and music audio output, your speaker output , and you can control bluetooth settings as well. I personally think its better than any of the paid apps that you can get. i also dont get why someone hasnt posted a link for thDSPManager.apk but i will post one for you and everyone else.
Dropbox link:
http://dl.dropbox.com/u/66547183/DSPManager.apk
Best of luck,
TheBookheimer
Droid X Miui 2012.2.1, V6 Supercharged, Beats Audio
TheBookheimer said:
i would highly recomend the dsp manager because it equalizes your application and music audio output, your speaker output , and you can control bluetooth settings as well. I personally think its better than any of the paid apps that you can get. i also dont get why someone hasnt posted a link for thDSPManager.apk but i will post one for you and everyone else.
Best of luck,
TheBookheimer
Droid X Miui 2012.2.1, V6 Supercharged, Beats Audio
Click to expand...
Click to collapse
DSP Manager force closes sometimes when I get a call.
Anyone tried volume+?
Has anyone used it on their Note 3 yet?
i hate the audio with a passion thru the external speaker, DSP is my only hope..
JCM800 said:
Has anyone used it on their Note 3 yet?
i hate the audio with a passion thru the external speaker, DSP is my only hope..
Click to expand...
Click to collapse
I gave up on DSP Manager after it never seemed to play music via the right profile (eg, bluetooth headphones would often be played with the "speaker" profile, or other shenanigans)
Then I discovered Vipers Audio! And never looked back... (I have this running on my Note 3)
http://forum.xda-developers.com/showthread.php?t=2191223
bakachu said:
I gave up on DSP Manager after it never seemed to play music via the right profile (eg, bluetooth headphones would often be played with the "speaker" profile, or other shenanigans)
Then I discovered Vipers Audio! And never looked back... (I have this running on my Note 3)
http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Wow thanks for the prompt reply dude. I agree Dsp isn't perfect, but it would help compared to stock, it's really awful imo.
So, in your experience has Viper improved the external speaker experience? I'm not so fussed with the 3.5, it's the external sounds that are bugging me.
Thanks
JCM800 said:
Wow thanks for the prompt reply dude. I agree Dsp isn't perfect, but it would help compared to stock, it's really awful imo.
So, in your experience has Viper improved the external speaker experience? I'm not so fussed with the 3.5, it's the external sounds that are bugging me.
Thanks
Click to expand...
Click to collapse
I haven't used it for the external speaker (but it supports this, just as DSP Manager does), but I don't think you'll be disappointed if you were to try it.
FYI: I use the "Lock effect mode" to force my Bluetooth audio profile onto all audio outputs, works a charm.
bakachu said:
I haven't used it for the external speaker (but it supports this, just as DSP Manager does), but I don't think you'll be disappointed if you were to try it.
FYI: I use the "Lock effect mode" to force my Bluetooth audio profile onto all audio outputs, works a charm.
Click to expand...
Click to collapse
This could be what I'm looking for, but I'm still relatively new to flashing etc, seems a bit daunting, the installation process? I take it you need to be rooted?
JCM800 said:
This could be what I'm looking for, but I'm still relatively new to flashing etc, seems a bit daunting, the installation process? I take it you need to be rooted?
Click to expand...
Click to collapse
Yes, you need root to complete the install. It goes something like this: install it like a normal APK, open it, it will ask for root privs, once granted, it will autoinstall the audio driver, and then all you need to do is restart. Job done!
bakachu said:
Yes, you need root to complete the install. It goes something like this: install it like a normal APK, open it, it will ask for root privs, once granted, it will autoinstall the audio driver, and then all you need to do is restart. Job done!
Click to expand...
Click to collapse
Thanks, this could be the key to make me love my Note 3. I need to root it first, then I'll look at tackling the installation in near future, thanks for replying, appreciate it
Just a thought tho - the Note 3 external driver is small, doesn't it distort easily driving bassy beats?
bakachu said:
Yes, you need root to complete the install. It goes something like this: install it like a normal APK, open it, it will ask for root privs, once granted, it will autoinstall the audio driver, and then all you need to do is restart. Job done!
Click to expand...
Click to collapse
Pmd you
Sent from my SM-N900W8 using XDA Premium 4 mobile app
So just to clarify, if i root, and install this - will I lose ota software updates from Samsung , or do you only lose them when flashing a custom Rom? Thanks.
bakachu said:
I gave up on DSP Manager after it never seemed to play music via the right profile (eg, bluetooth headphones would often be played with the "speaker" profile, or other shenanigans)
Then I discovered Vipers Audio! And never looked back... (I have this running on my Note 3)
http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Ringtone, notifications, system audio viper fx is ok but
Dont work with poweramp or samsung music player, know why? Thanks!
Enviado desde mi SM-N9005 usando Tapatalk 2
bakachu said:
I gave up on DSP Manager after it never seemed to play music via the right profile (eg, bluetooth headphones would often be played with the "speaker" profile, or other shenanigans)
Then I discovered Vipers Audio! And never looked back... (I have this running on my Note 3)
http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Hi, is it possible to make screenshots of your Viper4Android Settings!? Or upload your saved profile for testing!?
akelon said:
Ringtone, notifications, system audio viper fx is ok but
Dont work with poweramp or samsung music player, know why? Thanks!
Click to expand...
Click to collapse
This post seems to have some tips and tricks to try:
http://forum.xda-developers.com/showthread.php?t=2203255
Petteri said:
Hi, is it possible to make screenshots of your Viper4Android Settings!? Or upload your saved profile for testing!?
Click to expand...
Click to collapse
Yeah, heres my profile I use: *lots* of bass via the Dynamic Subsystem module, EQ that brings out the highs, and the "Extreme Headphone V1" listening device.
The profile files go under your SD Card under the viper4android/profiles directory (if the folder doesn't exist, try saving a profile first to autocreate it)
bakachu said:
Yeah, heres my profile I use: *lots* of bass via the Dynamic Subsystem module, EQ that brings out the highs, and the "Extreme Headphone V1" listening device.
The profile files go under your SD Card under the viper4android/profiles directory (if the folder doesn't exist, try saving a profile first to autocreate it)
Click to expand...
Click to collapse
Many THX for this, i will try!
Petteri said:
Many THX for this, i will try!
Click to expand...
Click to collapse
Are you trying this on a note 3 SD800 at all?
I'm concerned the small external speaker may distort easily?
JCM800 said:
Are you trying this on a note 3 SD800 at all?
I'm concerned the small external speaker may distort easily?
Click to expand...
Click to collapse
Could be, i will try later on after work! BR Petteri
Petteri said:
Could be, i will try later on after work! BR Petteri
Click to expand...
Click to collapse
Ok great, please post your findings. I'd like to try it on mine, but am not familiar with installing APK files etc at the moment. Or which is the best rooting method for the N3
JCM800 said:
Just a thought tho - the Note 3 external driver is small, doesn't it distort easily driving bassy beats?
Click to expand...
Click to collapse
Dude.....seriously?
Bass is driven by the amount of air the driver can push - Base is omni-directional (i.e.you feel it rather than hearing where it's coming from) so it doesn't really matter where you put your bass unit from a surround sound setup.
If you think the external speaker is going to give ANY sort of bass, you're seriously misguided, sorry!
If the frequency is too low then the unit just won't play it, that's why speakers have a frequency range.
Amdathlonuk said:
Dude.....seriously?
Bass is driven by the amount of air the driver can push - Base is omni-directional (i.e.you feel it rather than hearing where it's coming from) so it doesn't really matter where you put your bass unit from a surround sound setup.
If you think the external speaker is going to give ANY sort of bass, you're seriously misguided, sorry!
If the frequency is too low then the unit just won't play it, that's why speakers have a frequency range.
Click to expand...
Click to collapse
Why thanks very much, no need to be patronising, but yeah you made sense, thanks all the same.
JCM800 said:
Why thanks very much, no need to be patronising, but yeah you made sense, thanks all the same.
Click to expand...
Click to collapse
Yeah, my bad, sorry buddy.
Been ill the last 4 days and supposed to be flying to the states tomorrow for 9 days holiday! bit P******d about it.
But you're right, I should have toned it down.
Ignore the first line of my reply above, and it reads a bit nicer
hello,
i've searched now for a while and could not find a solution for this problem:
on my device (and this was the same with my note2) and on stock kernels i could not get the equalizer function properly.
the stock equalizer does not alter the sound in the right way, in fact it makes it LESS "loud" on the opposite frequencies i want to adjust.
example: if i want to add heights the bass goes down significantly, but no hights are added. same for adding bass: the heigts go down, but the bass level did not increase. if i turn the EQ off, the sound get much louder then, although i adjusted the typically "U" formed curve!
as far as my search showed this is a problem for other people as well, here in the note3 forum there are almost no postings regarding this.
is your EQ working as expected?
what apps do you use? stock music player or something different? i use google play music, but its the same for other apps as well.
even tried to remove all other music apps (as suggested in some postings) due to possible conflicts, but this wont help! i also installed a different equalizer app (and removed the stock one, after only disabling it) from the market, same results.
on my note2 i had the same issue, the only thing which helped was to flash a custom kernel. with this i was able to use equalizers the way they were meant!
does someone has some experience here?
regards,
markus
TML1504 said:
hello,
i've searched now for a while and could not find a solution for this problem:
on my device (and this was the same with my note2) and on stock kernels i could not get the equalizer function properly.
the stock equalizer does not alter the sound in the right way, in fact it makes it LESS "loud" on the opposite frequencies i want to adjust.
example: if i want to add heights the bass goes down significantly, but no hights are added. same for adding bass: the heigts go down, but the bass level did not increase. if i turn the EQ off, the sound get much louder then, although i adjusted the typically "U" formed curve!
as far as my search showed this is a problem for other people as well, here in the note3 forum there are almost no postings regarding this.
is your EQ working as expected?
what apps do you use? stock music player or something different? i use google play music, but its the same for other apps as well.
even tried to remove all other music apps (as suggested in some postings) due to possible conflicts, but this wont help! i also installed a different equalizer app (and removed the stock one, after only disabling it) from the market, same results.
on my note2 i had the same issue, the only thing which helped was to flash a custom kernel. with this i was able to use equalizers the way they were meant!
does someone has some experience here?
regards,
markus
Click to expand...
Click to collapse
i use poweramp and have no problem ,was using faux kernel with fauxsound app sound was excellent, but with firmware update faux kernel the camera is not working so im on stock kernel but poweramp is still working ok with good bass
jaythenut said:
i use poweramp and have no problem ,was using faux kernel with fauxsound app sound was excellent, but with firmware update faux kernel the camera is not working so im on stock kernel but poweramp is still working ok with good bass
Click to expand...
Click to collapse
thx for the answer,
i used poweramp for years, and it did me an excellent job! but for convenience i switched to google play some time ago, and since then i have this equalizer problem with samsung stock kernels! if i remember right this is since the introduction of 4.0 or 4.1!
because of my migration to google play i would need a solution how to get the equalizer right, and i'm curious if other people have the same problem! and: if someone managed to get it work!
I would try ViPER4Android
Thread (very overwhelming):
http://forum.xda-developers.com/showthread.php?t=2191223
designgears said:
I would try ViPER4Android
Thread (very overwhelming):
http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
thx, you are my hero!!!
problem solved, VIPER4A is really brilliant!!!
and most important: IT WORKS!!!
guys, try this, the sound improves a lot!!!
TML1504 said:
thx, you are my hero!!!
problem solved, VIPER4A is really brilliant!!!
and most important: IT WORKS!!!
guys, try this, the sound improves a lot!!!
Click to expand...
Click to collapse
Now I know this is many years old, but I see from your sig you have an S8+ now. Do you still have this issue with the stock EQ? I'm getting exactly the same behaviour with the S8+ and the S9+, turning any slider up just seems to cut the entire volume down, it's so annoying!
Ok I'm an audiophile musician, as many of you I think
and, though stock audio just works I'm trying to look at audio mods here
I looked in many threads and I can see that ARISE is very well known, supported and loved, but looks like is very customizeable and confusing....
dolby atmos in apps section doesn't work well, it lowers volume and...well, I can't feel any improvement
viper4android should be nice, but I never tried it
now...what are you using? things that work nice and stable, with quality enhancements....don't need thousands of profiles or eq since I'm a big fan of flat sound (the way is meant to be listened)
Thank you for your attention, once we'll have some satisfactory answer I'll make a poll and a general AIO audiophile thread with all working options as referral.
EDIT: ARISE audio system simple guide
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
go to this thread, don't be scared, just search for lastest deuteronomy zip and flash it
you will find a nice app called viper4arise that will let you manage settings separately for every audio output with simple and nice UI
you can also import presets and plugins, but it's secondary.
Im going to tune in on this. Would like to install ARISE on my nexus (comes with Viper4Android) but there are so many versions to choose from, it gets a bit confusing.
Any tips on which ARISE works for our phone on 7.1.1 ?
ARISE is the right answer. It's customizable for true audiophiles but simply flashing it seriously improves audio quality without you having to tweak anything. Seriously. I know there are several zips for ARISE. Just make sure you get the most current stable release (Deuteronomy� 2.3.3) and I usually go for the smallest zip file because I don't need all of the extra stuff like Dolby Atmos and whatnot. It comes with a modified version of the Viper4Android app that allows you to tweak settings to your liking. The app, by default, is setup for novices or people that don't need to get too specific with any settings so you can boost bass, enable clarity options, spectrum extension, etc. by toggling the switch next to it. Simple as that.
Alcolawl said:
ARISE is the right answer. It's customizable for true audiophiles but simply flashing it seriously improves audio quality without you having to tweak anything. Seriously. I know there are several zips for ARISE. Just make sure you get the most current stable release (Deuteronomy? 2.3.3) and I usually go for the smallest zip file because I don't need all of the extra stuff like Dolby Atmos and whatnot. It comes with a modified version of the Viper4Android app that allows you to tweak settings to your liking. The app, by default, is setup for novices or people that don't need to get too specific with any settings so you can boost bass, enable clarity options, spectrum extension, etc. by toggling the switch next to it. Simple as that.
Click to expand...
Click to collapse
so. you suggest to flash deuteronomy (lastest) and...just that? what about plugins, the prop editor that comes with hell of documentation...profiles and stuff...none of that?
if you're sure it works, is stable enough, simple and it has graphic (not text editing or changing files on system) settings through an app....I'm going to test it right now....
throcker said:
so. you suggest to flash deuteronomy (lastest) and...just that? what about plugins, the prop editor that comes with hell of documentation...profiles and stuff...none of that?
if you're sure it works, is stable enough, simple and it has graphic (not text editing or changing files on system) settings through an app....I'm going to test it right now....
Click to expand...
Click to collapse
There's a zip with v4a profiles, Copy it to v4a directory in sdcard and choose Audiophile 10.0
Envoyé de mon Nexus 5X en utilisant Tapatalk
throcker said:
so. you suggest to flash deuteronomy (lastest) and...just that? what about plugins, the prop editor that comes with hell of documentation...profiles and stuff...none of that?
if you're sure it works, is stable enough, simple and it has graphic (not text editing or changing files on system) settings through an app....I'm going to test it right now....
Click to expand...
Click to collapse
I never did any of that. I just flashed, booted up, went into the ARISE V4A app and toggled the options I wanted. There was an immediate difference in audio quality. You can toggle the options while playing music and hear the difference.
EDIT: Oh. Make sure to disable MusicFX or whatever that nonsense is. Settings > Apps > Show system apps > MusicFX and disable.
Alcolawl said:
I never did any of that. I just flashed, booted up, went into the ARISE V4A app and toggled the options I wanted. There was an immediate difference in audio quality. You can toggle the options while playing music and hear the difference.
Click to expand...
Click to collapse
ok! so this is a solution. I'm going to try it right now....
for anyone else who pass here, if there is any other thing you are using please reply here! we want options!
EDIT: Ok guys I tried ARISE and it works damn well, I can manage audio settings without profiles since I know how to tune that, but main mportant thing is that it works.
Now, regarding higher bitrate? or anything else?
Will arise work on stock N with stock kernel?
Sent from my Nexus 5X using Tapatalk
Nightshadow931 said:
Will arise work on stock N with stock kernel?
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
yes is working great on 7.1.1 for me
throcker said:
yes is working great on 7.1.1 for me
Click to expand...
Click to collapse
any review for this?
Alcolawl said:
I never did any of that. I just flashed, booted up, went into the ARISE V4A app and toggled the options I wanted. There was an immediate difference in audio quality. You can toggle the options while playing music and hear the difference.
EDIT: Oh. Make sure to disable MusicFX or whatever that nonsense is. Settings > Apps > Show system apps > MusicFX and disable.
Click to expand...
Click to collapse
What settings did you like? First time user and setup using the audiophile settings in the 2nd post.
rmead01 said:
What settings did you like? First time user and setup using the audiophile settings in the 2nd post.
Click to expand...
Click to collapse
Really depends on what you're playing the music on. I usually enabled Spectrum Extension (0.4 strength) as a lot of my music is 320kbps MP3 and Bass Boost (default settings) for Bluetooth and Headset (3.5mm jack) while enabling "Speaker Optimization" for the speaker. I mainly use the bluetooth audio in my car and while my car stereo isn't that great but I did throw some Kickers in the front doors. Spectrum Extension is awesome, but make sure to disable it if you're listening to any FLAC files.
Alcolawl said:
Really depends on what you're playing the music on. I usually enabled Spectrum Extension (0.4 strength) as a lot of my music is 320kbps MP3 and Bass Boost (default settings) for Bluetooth and Headset (3.5mm jack) while enabling "Speaker Optimization" for the speaker. I mainly use the bluetooth audio in my car and while my car stereo isn't that great but I did throw some Kickers in the front doors. Spectrum Extension is awesome, but make sure to disable it if you're listening to any FLAC files.
Click to expand...
Click to collapse
I really only listen to music through headphones/AUX in the car so I edited some of those to the audiophiles info in the post. I turned on the spectrum extension and will see how I like it since it's all streamed from spotify (no flac).
Alcolawl said:
EDIT: Oh. Make sure to disable MusicFX or whatever that nonsense is. Settings > Apps > Show system apps > MusicFX and disable.
Click to expand...
Click to collapse
Why do you disable MusicFX?
And it's necessary on stock too?
Midomad said:
Why do you disable MusicFX?
And it's necessary on stock too?
Click to expand...
Click to collapse
Because it interferes with ARISE / V4A. If you're completely stock with no audio mods there's no point to disabling it.
yoorie016 said:
any review for this?
Click to expand...
Click to collapse
reviews like? try it...doesn't fry your phone haha
you can also disable it
throcker said:
reviews like? try it...doesn't fry your phone haha
you can also disable it
Click to expand...
Click to collapse
I'm afraid that is the trend right now.
btw, i try it on my phone. I hope i didn't get any bootloops after i root my phone.
yoorie016 said:
I'm afraid that is the trend right now.
btw, i try it on my phone. I hope i didn't get any bootloops after i root my phone.
Click to expand...
Click to collapse
aah bootloop is not cauxed by us fu$%!ng un our phone with mods.....is just hardware....when it comes it comes....
meanwhile flash the damn thing!