Database Users

[Q] Error Description: USB init failed

i keep getting the Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723). is there any way to get around this error?
edit: credit goes out to guinhill he pointed me to the solution. first make sure your log in name in windows has administrator rights. then before you try to flash an android rom with magldr make sure that you disable all usb connections in active sync before you attempt to flash an android rom. i now have android running beautifully on my hd2.

me too.

1- Load Android Flasher mode.
2- Connect USB cable from PC to phone.
3- You should see MAGLDR with ‘Wait USB…USB’.
4- Go to control panel and then ActiveSync.
5- Uncheck allow USB connections.
6- Then execute DAF.

[Q] OMG....Someone please help......

Morning....I have HTC HD2, Flashed with current 1.11 MAGDLR and Radio 2.15. I have Flashed NexusHD2-Froyo_V1.9a_NAND and would like to update to current NexusHD2 build. However, when the bootloader is entered into, and Flasher is selected, phone will see USB, but when hooked to PC and DAF is selected to Run in Admin, I get a Error mess, that the computer is not seeing the USB and connecting.
Now seeing that I am VERY new at this.....I don't understand too much about Task 29 or things like that I have read about as far as a fix for the Error. But I cannot seem to find anyone that can tell me how to either fix the issue, or a solution around the problem so that I can either load another ROM or load the update.
I guess I should also add that my phone is running Android from the root side of the phone and not a dual boot with Windows still intact. I think that was important to add somewhere I read.
THanks for any help anyone can give me......
Micki

http://forum.xda-developers.com/showthread.php?t=893948

I had the same problem, when you open the file and it should be daf.exe file or install.exe file, you have to extract that file the a new folder on your computer and then open it from within the folder with right click and use as administrator!!!! worked for me..let me know...

This doesn't belong in the NAND development forum!

Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.

nir36 said:
This doesn't belong in the NAND development forum!
Click to expand...
Click to collapse
Someone should move it then

[Q] how do i flash???

hello, i flashed my hd2 many times but i now have an issue. i have windows 7 rom by boyppc_shiftpda v1 installed on my leo. which flashing software do i use to flash my leo so i can install a different rom onto it. the problem for me lies in the fact that when i connect my leo to my computer, zune software automatically starts up and it connects to the phone, unfortunatelly the computer does not recognize the phone as a storage device and does not think it is connected. so every single time i am trying to flash it with any of the DFT soptware i get an error that usb device is not connected.
HELP

You have to boot your HD2 into MAGLDR by holding the end/power button down while booting your HD2 up. When the MAGLDR menu comes up use the volume buttons to scroll down to option#5 USB Flasher and then connect your HD2 via USB cable to your computer. When you see your HD2 listed as MAGLDR in safe to remove you can right click on the DAF and select run as administrator. I also think you have to have ActiveSync or WMDC (ActiveSync for XP, WMDC for Vista and Windoes 7)" installed on your computer for for USB drivers perposes. Not 100% sure about that though but I have read people post that after they reinstalled these programs they had no troubles.

Check this tutorial... Worked for me and has all the relevant links...
YouTube Tutorial...

Hey,
it is realy easy. but you do not necessarily have to install Active Sync or WMDC ( what ever ). I plugged my Phone into the new installed Windows 7, Switch in the Magdlr and choose USB-Flasher.
Now Windows 7 download the Driver automatically. ( wait a few Minus, i mean 5 )
If installed, rigthklick -> run as admin -> have fun

[Q] How to update from WP7 7.0.7004.0 to 7.0.7392.0 NoDo

Hey ....
I've got this doubt may be its something so stupid, but I just can't find out how to update my HTC HD2 WP7 from old build to NoDo new one....
I've tried by turning off the phone, then turning on volume down key and power button pressing, selecting USB Flasher in Magldr 1.13 and then executing the ROM in the computer but appears like not connection between phone and computer so there is my problem, so what should I do ??? I dont want to screw up my phone trying another variants that's why I prefer asking...... and If the threat is opened already thanks for give me the link =) because I didn't find one ..
thanks....

The best thing to do would be to task 29 your phone first, then flash MAGLDR, then the ROM. Keep in mind that you will lose all of your data as there isn't a way to backup/restore your WP7 settings (they are working on it i believe). Also, when selecting USB flasher you should wait until it says " USB connected....USB" and then flash the ROM. Lastly, if you're using Windows 7 make sure you run the launcher as administrator.

Can I flash my Rom JUST by using MAGLDR1.13 option 5, USB flasher USB connected....USB and then launching the new rom in Win7 administrator ??? That is the thing when im trying this way appears : An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
soo that's why I don't know what's happening ...

elerjordan said:
Can I flash my Rom JUST by using MAGLDR1.13 option 5, USB flasher USB connected....USB and then launching the new rom in Win7 administrator ??? That is the thing when im trying this way appears : An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
soo that's why I don't know what's happening ...
Click to expand...
Click to collapse
You must run the app as administrator in Windows 7/Vista

I do, I run the app as administrator and nothing ... but my question still being that if my procedure is correct.........

Heeeeeeeeeeeeeeeeeeeeeeeeeeeeelp !!!!!!!!!!!!!!!!!!!!!

i´ve this problem, today.....re-intall Windows Mobile Device Center and all drivers USB are ok.....and flash all again
Regards
Jomibalo

I re-installed the Windows Mobile Device Center and the problem still the same =/ =( so you say that the problem its because of bad drivers ????? how to uninstall everything and install one more time the drivers .............. HEEEEEEEEEEEEEEEEEEELP !!!!!!

SOLVED !!! .... Maybe I didnt get the idea of jorge_jomi I thought that he meant to re-install the windows 7 phone manager, but re-installing the Windows Mobile Device Center for Windows 6.5 the problem was solved, this is a problem of DRIVERS !!! ... why to re-install Windows Mobile Device Center 6.5 ??? No Idea ... but it solved the problem .... and THANKS JOrge !!!!!!!

I m out for a few days.....glad to help.....
Sent from my HTC HD2 using XDA App

[Q] USB init failed (1198), don't get connection!

Hi all together
I am trying to install the new version WP 7.1 from here [ROM][21LANGS] 05.01.12 HD2O© v1.26 WP7 8107 FULLY UNLOCKED [online]
But i always get this error:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
My HD2 has already the first version of WP7 installed and is running without any problems. I have updated my phone to MGDLR 1.3 and HSPL 2.08 successfully but now i m trying for hours the 7.1 update from above without any success.
Have already tried on two different Windows 7 pc's (on one without zune, on both qualcomm drivers installed).
Disabled Wifi.
Disabled any firewall.
Please help me!!! What should i try for next???

MagLDR was missing
Hi mate,
I was having the same poblems - installed MAGLDR and the installation went through
http://forum.xda-developers.com/showthread.php?t=893618

ludiaribar said:
Hi mate,
I was having the same poblems - installed MAGLDR and the installation went through
http://forum.xda-developers.com/showthread.php?t=893618
Click to expand...
Click to collapse
uh...he already has magdlr installed..doh! read how to flash a hd2 first....see links in signature. when you get into magdlr select 5. usb flasher...this initiates the usb link with the flasher on the pc. also, everything needs to be run as admin.
only thing to add is go into magdlr select 10. services, 5. clearmbr, 4. uselast24nand before flashing wp7...this is critically important!!!

run as administrator, think thats where you are going wrong, right click and goto compatability and select run as administrator...that worked for me.

RUN as Admin...
promethieus said:
run as administrator, think thats where you are going wrong, right click and goto compatability and select run as administrator...that worked for me.
Click to expand...
Click to collapse
Of course that resolved it for me too! I always forget about that "little detail"
Thanks for the reminder.