Hi, just bought a PNY 8GB USB drive FAT32, when i plug it in HC recognizes it, now here is the problem, when i try to transfer a 600MO file from the transformer to USB drive it fails after 5 or 10 percents. Now i tried to activate the debbuging mode and it worked...but once only. So i decided to restart HC, try again and it worked again but only once again ! Why do i have to restart HC in order to be able to transfer files ?
Thks for helping
Related
Does Elocity A7 support NTFS file system? I have problems accessing my USB stick which is formatted in NTFS...or something else may be an issue !?!. In any event it can not read it...any suggestion?
Regards
Upgraded firmware and now when USB memory stick is plugged in I am getting a message the it is being checked for errors....but data on it so far cannot be accessed...Anybody else has issues with reading memory stick thru USB port?...SD card works like charm...
Regards
When I first got mine I was using my key which is fat32 and ran into the same problem. I had to reset the device before I could use my usb stick again. Haven't tried an NTFS usb device but either way it's not on the a7 to support NTFS, it is Android's task.
It would be interesting to know if other people had problems of accessing USB memory stick...for me memory stick would be much easier mean of exchange software/data between PC and Elocity than microSD.
Regards
I found out that if memory stick is formated as FAT32 then Elocity has no problem reading it...
USB memory stick
I have no problem accessing my USB stick, my problem is transfering the data like music or movies into folders which Elocity a7 doesn't allow me to do.
I have tried coping and or moving files i.e., songs, movies, am I doing something wrong or is there a right way to do it?
You can copy files from USB to SD card...only file by file not directories
The other way is to pull out your SD card and copy files on it using adapter on your PC
The third way is to use application which lets you access your Elocity using your browser on your network which will then allow you to copy files to/from device
Regards
My a7 originally could mount and read the sd card and the usb drive. Then one day it suddenly would not mount the sd card and it always said it was checking for errors. I tried a wipe and restore, formatting the card, and a different card. None of it worked. Finally I loaded Dexter's 1.41 mod. The mod worked great but the sd card still couldn't be mounted. And then the usb drive gave me errors and one time would work and another time it says preparing storage checking for errors. Right now neither the sd card or the usb are being mounted. After 4 emails to elocity support I am pretty frustrated with this unit and thinking of just ordering an ipad.
ellwilson said:
My a7 originally could mount and read the sd card and the usb drive. Then one day it suddenly would not mount the sd card and it always said it was checking for errors. I tried a wipe and restore, formatting the card, and a different card. None of it worked. Finally I loaded Dexter's 1.41 mod. The mod worked great but the sd card still couldn't be mounted. And then the usb drive gave me errors and one time would work and another time it says preparing storage checking for errors. Right now neither the sd card or the usb are being mounted. After 4 emails to elocity support I am pretty frustrated with this unit and thinking of just ordering an ipad.
Click to expand...
Click to collapse
Do you apply the vold patch with 1.41? Also you have to have a folder/directory sdcard/sdcard-disk (sdcard-disk) is the one needed. This still won't allow card to be read from boot other then applying zips with sysrecovery. It has been mentioned before in another thread if your not running elocitys FW you can't really complain about it to them.
If that folder/directory isn't created it won't read with the patch. USB also has something about it. Read up on this thread.
http://forum.xda-developers.com/showthread.php?t=890042
Hello, I'm new here and I did experience some sort of USB or MicroSD issue where the eLocity unit did read the USB at first and then the next time I put the USB flash drive it cannot read it, no matter what I do. Then I hit the reboot key at the back using a pin or something sharp and I tested both drives and it did read them.
I learn that before removing the USB FD you need to dismount by tapping the connection icon to safely remove the USB. You will then receive a message to confirm the removal of USB drive.
I hope this help.
Peace....
I've just got a 32GB Sandisk Class4 MicroSD and my transfer speeds are horrible when mounted over USB.
Also after some time, the transfers may fail, and the mount is no longer reachable. I.e. you can no longer browse it through My Computer.
When this happens, the phones interface grinds to a halt, and I need to restart it. Key strokes will take seconds to come up, etc.
I've tried reformatting the SD card, reinstalling Kies to get the latest USB driver, but the speeds still the same.
I found if I manually did "safely remove hardware" for the Android internal SD mount, the speed is a bit faster.
Any ideas?
Try adding the phone as a USB mass storage with USB Debug On, also use only the supplied Samsung cable and finally did you format the card in the phone before you started using it?
Solidswede said:
Try adding the phone as a USB mass storage with USB Debug On, also use only the supplied Samsung cable and finally did you format the card in the phone before you started using it?
Click to expand...
Click to collapse
Yes to all three, that's how I'm currently using it
Go to sandisk web site download sd card checking tool .
jje
JJEgan said:
Go to sandisk web site download sd card checking tool .
jje
Click to expand...
Click to collapse
I couldn't find that, but ran H2TestW, which managed to write all the files fine but had read errors.
Not sure if that is because I have it going through the phone, maybe I should try an SD card adapter to the PC?
I have used my USB Thumb Drive with my TPTablet before but today it killed the drive.
Plugged it in and it was not recognized.
Went to setting and the "mount USB" was pale and I could not get it to go on.
When I plugged the TDrive back in my PC it told me that it had to be formatted.
What is going on??
This is 64 GB Kensington DataTraveler, formatted exFAT.
The funny thing is the same drive worked before. I'm afraid to try my new 128 GB drive now as I don't want it bricked.
Still not working
I found a utility that allowed me to format to FAT32 but the TPT is still not recognizing it.
I have tried it with the TPT on and with it off, it still tells me that there is nothing availale and I cannot click on the "mount the disk" tab in settings.
Help please
Model: ZE551KL
RAM: 3G
Firmware: LOLLIPOP 5.0.2
Rooted: No
I have several problems with my OTG conection,
1. When I try to plug in a USB joystick through OTG I can´t make it work , the cellphone does not recognize the usb. but when I connect a mouse or a keyboard, they work fine, it just the joystick, I have tested the USB joystick in differents cellphones with OTG support and it works perfectly
2. I have a 32g sd card and few days ago it stopped working now I can not use it , the cellphone says that my sd card is empty and I have to format it, but when I format it, does not happen anything .. the cellphone only say, the sd card is empty (format or cancel)
3. finally I try to conect a 1T hard disk but the cellphone show me that the disk is empty but it is not empty , it works fine in my laptop and my moto g2
I appreciate your help to solve these problems
1. AFAIK, no standard for OTG. So Laser 2 might support mouse/keyboard/storage but not joystick.
2. Got corrupted or a bad card. How did you format it and with what format? e.g., not all card readers support sdxc. If cost not an issue, just get a new card BUT if some bad app corrupted the file system it might happen again.
3. Can't be sure but again maybe a limitation of the Laser 2 OTG implementation.
T530 keeps rebooting every time i insert usb 3.0 64 gb. Is not supported by the tablet? I formatted the usb to fat32 but it didnt work. Any idea why? And how can i make it work? Please? Thanks in advance.
Maybe the tablet didint support the 64 GB USB, even if it supports USB OTG, and you inserted a newer type of USB the tablet didint recognize cause the firmware is older and cnat read 3.0 type of USB.