Related
Self-dangerous noob here. NC 1.2, theoretically returned to stock
History:
Got NC 1.2
Rooted w/ManualNooter 4.5.25. Everything seemed to go great. So...
Downloaded, backed up, and flashed CM7 in ROM Manager
Wouldn't boot...hung on n COLOR screen
Same results w/ Phirerom (CM7 based - doh)
Able to restore MN4.5.25 from CWM - BUT noticed "Error formatting /data!" during nandroid restore. Didn't seem to matter...restore successful
Get "Error formatting /data!" no matter what
Able to boot into CM7 from SD, but it has "problems". For instance, there are no "back" or "return" softkeys. So there is no way to navigate around any app! Only the hard "n" home key works
Reflashed stock 1.2
Seemed to work, began to ask me to reregister. BUT, it won't display the keyboard, so I'm stuck at the "Login with your existing B&N...." screen! Keyboard flashes up and then immediately disappears!
As an noob, it occurs to me that all my problems are related to my inability to format the /data partition (if it's even called a partition).
Can any of you awesome people help me? And, if I'm in the wrong forum, any directions would also help. Thanks.
Same error here
If anyone can help with this it would be much appreciated.
have you tried removing CWR then do the 8-boot reset?
No, every time I've done it, it boots into CWR. Maybe REMOVING it will help. lol. Sorry to be so inept. I can flash the 1.2 stock that will remove CWR. Is that the way to do it?
Worked like a charm
Removing CWR and 8-boot-interrupts did the trick. I'm now back to a fully stock NC 1.2.0. Ready to roll up my sleeves and re-brick!
This is the most amazing community. The closest thing I have to any technical knowledge is speaking a little Klingon. VERY little. But, I have learned more here by reading these threads for a couple hours...OK, several hours... than my wife has learned in a dozen trips to the apple store. I feel more empowered every day. You are all great. Can't thank you enough.
Goldie, I wasted a bunch of time on this last night. I'm guessing you have a new nook. If you do, slap cwr on your SD (3.0.2.8 or something) and look for the thread that tells you how to repartition your nook. Follow instructions to set it to the old way. After that run manualroot zip through cwr. Reboot to cwr and wipe data, system, cache. Finally install your rom of choice from your SD card through cwr. That's what I did to finally get it to work.
Thanks. I'll give this a try. As you probably guessed, I DO have a new NC, and while I was able to get it back to 100% stock, and easily reregister it, I had the same results. The ONLY way I can get CM7 running is off the SD card. So, I'll try the partitioning trick. Why do I get the feeling this is going to work? Unfortunately, I'm not on dev's time... I'm at work by 7:30am EDT, but in bed pretty early. I REALLY appreciate the response. Later this week I'll install SDK, and all my tools at home so I'll be able to stay up all night with you awesome folks.
still looking for the thread on re-partitioning. I found the thread on restoring, but I get the error every time I try to reformat the /data.
No luck. I can restore to stock 1.2, reregister, and MN 4.5.25, all easily. BUT, once I flash CM7 (or Phiremod 6.3, etc.) it hangs at the "n C O L O R" screen (C O L O R flashing at various speeds just to fool you into thinking it's actually going to work). Here's what I've noticed...after flashing CM7, the ADOBE screen no longer flashes up at boot. Once it fails to boot the Adobe software, it won't boot at all. So, for now, I guess I'm running CM off my SD unless anyone can suggest anything.
Goldie u have to repartition to get it working. Ill go look for the thread. Also maybe you should try out the cm7 mod over the phiremod Tom. I'm on phiremod now and the lag is killing me
Wow that was painful to find. Needs a sticky.
http://forum.xda-developers.com/showthread.php?t=1094371
Edit: I take that back about the lag, set your cpu to 1200 in the ROM and change yourgovernator to interactive for an amazingly smooth experience
I've been going nuts trying to figure this out. I too ran into the "error format /data" message but I powered through it only to end up at at the Android logo--nothing. Out of frustration, I returned to CWR and wiped everything--like on my Evo (did not go through to mounts option). That seemed to go through /data but I don't know the difference between a wipe and a format (I'm looking...). Still got bootloops. I tried to return to stock but the 8 interrupts wouldn't work.
Pressing START and N worked though and that got through to CM7 and it's working great now but I'm afraid to do anything else because I still get the "error formatting /data" message.
I've heard horror stories (bricking beyond repair--if that's possible) of users repartitioning their drives though so... I hope there's another solution out there.
I love this community!!
Sys:
Thanks a million!! Everything perfect!! I just can't say enough about this awesome community, all the amazing devs.
heh you're more than welcome . i hope this helps anyone else that stumbles on your thread as well. Ive been having fun with my nook but i think its time to trade it out for something a little bigger. Maybe ill just wait till att gets its flavor of gs2 idk. So many choices out there!
thanks guys!
i just had the same problem and falshes all kinds
of zips until i found this post.now i've launched cm with status bar
really really thanks
this worked great for me too! i had a nookcolor bought in december and it had a messed up chargerand 6 really bright white spots that were really noticiable. went to b&n store and the guy just gave me a new one. it came with 1.2 and i had the cwm sd from the old one. so tried restoring my cm7 backup from the old one and error formatting data came up. flashed this zip, and im wondering, since these are too different nookcolors, should i restore the cm7 backup or flash it brand new. because i had a ton of stuff on the old one and i dont want to lose it. so can i ust do advanced restore and restore data, or can i restore the whole thing or just flash and slowly get my stuff back?
update cwm
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
bl3achcrazy said:
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
Click to expand...
Click to collapse
i have tried 3.2.0.1 but get same error message
3.2.0.1 on the bootable card or already on the eMMC? It has to be on the bootable card.
Thanks
It works after getting my nook color around 2pm today and taking it home. I was working on this thing all day I tried several ways and this one worked!!! Having issues with wifi that's all
Ok. Let me start by saying, I'm obviously not an expert on hacking/developing and stuff like that. I just love to tinker stuff so I learn in the process. So definitely not an expert. Just posted this thread hoping that someone whose possibly a lot more knowledgeable than I am would notice it and hopefully shed a light on this question.
Is TWRP 2.0 which can be seen here, working/compatible/available/will be available on our beloved NookColor?
All we are using right now is the ClockWorkMod Recoveries, right? Which I believe the latest is 3.2.0.1. I'm not saying at all that CWM is not sufficient enough to do whatever it needs to do, I just thought it would be awesome to be able to get your recovery things done THAT MUCH COOLER, navigating the device via the touchscreen rather than hardware buttons.
Hope this sparks more awareness!
+1 - I would like to see TWRP on our devices as well, BUT ... I would definitely miss the convenience of being able to install the nightlies directly from ROM manager.
OK, saying that, I also just had a perma-brick on my Nook and am getting a replacement due to an issue that occurred in recovery. I was stuck in the infamous CWR boot-loop, so did a restore, when I went to reboot, screen itself would never come on again - not after charge, not after holding buttons, nothing.
Is it related, I don't know, maybe not, but makes you think.
majorpay said:
+1 - I would like to see TWRP on our devices as well, BUT ... I would definitely miss the convenience of being able to install the nightlies directly from ROM manager.
OK, saying that, I also just had a perma-brick on my Nook and am getting a replacement due to an issue that occurred in recovery. I was stuck in the infamous CWR boot-loop, so did a restore, when I went to reboot, screen itself would never come on again - not after charge, not after holding buttons, nothing.
Is it related, I don't know, maybe not, but makes you think.
Click to expand...
Click to collapse
Oooh, that's too bad. And scary. Makes you worry about doing something that's not tried on the NookColor before. I wont dive in unless the devs really says that it's safe.
Hey, about your NC being bricked. I had something pretty similar happened to my NookColor before. Got stuck into a boot loop. Now before, I had my TitaniumBackup folder stored in the eMMC and I didn't want to do anything that would delete it. What I did is, I had another microSD card and created a bootable CWM. I installed a CM7 nightly on the microSD. Upon booting to the microSD build, I went and have adb wireless transfer my eMMC files to my PC. Now that I've recovered my TitaniumBackup folder, I formatted everything on my NC using the bootable CWM. Then what I did is I flashed the stock NC Rom which was 1.2 version. I did a factory reset. After that I had everything back to normal again. I flashed the nightly build on the eMMC again and from then on, had my TitaniumBackup folder on the microSD. Have you tried creating a bootable microSD?
A little late...
Did you try a formatted bootable sdcard? The nook is near indestructible. I had the same issue and recovered.
fr4nk1yn said:
Did you try a formatted bootable sdcard? The nook is near indestructible. I had the same issue and recovered.
Click to expand...
Click to collapse
Same here, I put together a nookie froyo card, and got bootloops.I took the memcard out and still got bootloops. I put a cwm card in, and STILL got bootloops. Then I made a new cwm card, and it booted just fine.
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
i do not have an answer but this answers my question of whether I want to run manual nooter on my 1.3 or try cm7. the cm7 steps seems more intimidating
Well i tried several more times last night with no luck. Then i got brave and just wiped everything (data,system,cache,dalvick) then flashed cm7 and gapps straight from my cwm boot card. I somehow
Ended up with a fully functional nook. App market works. Rebooted several times to be sure. I even tried usb host with my homemade adapter. Mouse, keyboard, and sandisk cruzer all work splendidly thru a powered hub.
My only mistake was i cant find my backup of stock 1.3 rom. Is there one floating around?
Sent from my LG-VM670 using Tapatalk
If I'm understanding correctly, you're trying to go from CM to 1.3, correct?
From what you've described, I suspect Clockworkmod 3.0.2.8 is your problem. If you look carefully as you format /data in preparation for reloading the BN 1.3 firmware, I think you'll see that the format is actually failing. That version of CWM doesn't handle the partitions correctly.
You want 3.2.0.1. See the edits at the top of this thread: http://forum.xda-developers.com/showthread.php?t=987735
If you're already on CM7.1, you probably have the correct version of CWM installed. You can save yourself a step by formatting the /data and /system partitions using that, then continuing on with the rest of the procedure for restoring BN 1.3. I went through all this myself a few days ago while preparing to go to BN 1.4.1.
I forgot to mention in my last post that i realized i was using the wrong cwm image and i burned another card with cwm 3.2.01.
I was still getting a boot-loop so i wiped everything and went straight to cm7.
Sent from my LG-VM670 using Tapatalk
@bobstro
I didn't read your post correctly.
I had a stock nook that i want to install cm7 on. Not the other way around. I asked about a stock 1.3 file just in case i need to do a restore. The nook is done. Its running cm7 just fine and i have given it back to my friend.
I really need to get myself one :-(
I usually mess around with my sons but he's at his mothers for the weekend with it. After christmas im getting one. Dont know if it'll be a color or a nook tablet but im getting one for sure!
Sent from my LG-VM670 using Tapatalk
If you intended to install CM7 from beginning, then why you wasted time messing around with ManualNooter?
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
pdrift said:
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
Click to expand...
Click to collapse
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
pdrift said:
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I hope you do use Windows at some points.
Let's put it this way.
You bought a PC with Windows XP pre-installed, get home, you don't want XP, so you install Windows 7 on the PC. You just whack the XP.
Same theory applied here, B&N shipped their NC out with the original stock ROM, which is Froyo-based OS. You want to install CM7, which is Gingerbread-OS ROM. You just whack the stock and install CM7.
oh I get it know. so its pretty easy if you want to go straight to cm7 just wipe and flash.
After reading some posts from the nook tablet section, i guess i'm getting a nook color.
what a shame about the locked bootloader :-(
i didnt technically solve the boot loop issue, i just erased everything, but should I mark this as solved and if so how?
The current Nook Color bootloader is not locked. The Nook Tablet's is. I wouldn't necessarily rule anything out, though. The bootloader on the Motorola Droid 2 is also locked, and there's quite an active Cyanogenmod community around it. The only problem is that we're stuck with whatever kernels B&N release, so ICS may be a long way off. I suspect the NC will remain the tuner's machine of choice, but the performance on the NT is very nice. If you can live with a rooted B&N ROM, it's a nice device for now.
billingdl said:
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
Click to expand...
Click to collapse
No, it seems that some 1.3 based NC units will bootloop if 4.6.16 is used to root them. I'm not sure why. Even after repartitioning to original nook partition sizes, or using CWM 3.2.01 (which supports the new partitioning), it'll still bootloop if 4.6.16 is used. Might be because of the different kernal included, but I'm not knowledgeable enough to know for sure. They root fine with 4.5.18. Haven't tried one with the new 1.4.1 compatible nooters.
To the original poster;
I'm having the same problem here, installed 4.15 successfully, installed 4.16 and am getting stuck in boot loop at the rainbow nook color screen.
I'm not understanding the 8 boot fail procedure though. Is this when you let the boot loop run through 8 times or when you get to the point of when the boot loop starts, shut the NC off and power it back on?
Also, to install cm7, all you did was put it on your sd card, and installed it through cwm?
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
pdrift said:
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
Click to expand...
Click to collapse
Thank you good sir! I was stuck in boot loop forever and couldn't find a clean explanation of the 8 boot fail process. I always tried to turn it off when the rainbow nook color screen came up.
I got it reset, made a flashable CWM SD card with 3.2 and then flashed CM7 on there and it works great!!
That was very frustrating, thank you!
Dont mention it, Glad to here I was able to help you out. I felt the same way when I was in that situation. Lots of googling to get a clearer idea on what that 8 boot method entailed. CM7 really makes it feel like a totally different device.
To all the devs that work on these projects, thank you
sent from my OV CM7 IHO using tapatalk
ive recently purchased a nook color version 1.3 and did all the steps to build cm7 on sd ard inserted it into my nook it downloaded then rebot and seem to come up im cm7 but my touch screen isnt working any suggestions?
Hey guys,
Since I've had my Nook Color (installed CM7 as soon as I got it), I've never been able to connect to my wifi, I always thought it was my router's fault. The other day I got my girlfriend one, and installed cm9 on it for her. It connected to wifi straight away and browsed the internet with no problem. I thought maybe CM9 thus had a fix for wifi and installed it on mine, but alas, still no internet Has anyone had problems with their wifi on the Nook and been able to fix it? I REALLY want to connect, I just don't know what else I can do. Would messing with the partitions possibly cause this? It's definitely my Nook that is the problem, cause I did the EXACT same installation of CM9 on both of them, and only my wifi isn't working properly. Also, mine tends to freeze quite often on CM9, and hers does not?
ANY help will be really appreciated!!
Thanks,
Rudi
I
Guit4eva said:
Hey guys,
Since I've had my Nook Color (installed CM7 as soon as I got it), I've never been able to connect to my wifi, I always thought it was my router's fault. The other day I got my girlfriend one, and installed cm9 on it for her. It connected to wifi straight away and browsed the internet with no problem. I thought maybe CM9 thus had a fix for wifi and installed it on mine, but alas, still no internet Has anyone had problems with their wifi on the Nook and been able to fix it? I REALLY want to connect, I just don't know what else I can do. Would messing with the partitions possibly cause this? It's definitely my Nook that is the problem, cause I did the EXACT same installation of CM9 on both of them, and only my wifi isn't working properly. Also, mine tends to freeze quite often on CM9, and hers does not?
ANY help will be really appreciated!!
Thanks,
Rudi
Click to expand...
Click to collapse
See if you can go back to stock and set up wifi first, then install CM.
Look here for how to do it easily:
http://forum.xda-developers.com/showthread.php?p=25405429
Sent from my Nook Color running ICS and Tapatalk
I've got some new information:
1) If I triple boot using this method:
http://forum.xda-developers.com/showthread.php?t=1448186
Then my wifi works.
2) If I revert back to stock, then my wifi works.
3) BUT if I try to install to emmc using this method:
http://forum.xda-developers.com/showthread.php?t=1030227
Then it doesn't work??
Does that give any clues to why it isn't working? I really want to install Cm7 internally than on the SD card. Also, my girlfriend's nook runs CM9 smoothly, mine keeps freezing
Thanks for the help so far, really appreciate it!
Guit4eva said:
I've got some new information:
1) If I triple boot using this method:
http://forum.xda-developers.com/showthread.php?t=1448186
Then my wifi works.
2) If I revert back to stock, then my wifi works.
3) BUT if I try to install to emmc using this method:
http://forum.xda-developers.com/showthread.php?t=1030227
Then it doesn't work??
Does that give any clues to why it isn't working? I really want to install Cm7 internally than on the SD card. Also, my girlfriend's nook runs CM9 smoothly, mine keeps freezing
Thanks for the help so far, really appreciate it!
Click to expand...
Click to collapse
Are you doing a factory reset with your CWM card before you flash CM to emmc? The freezing makes it sound like your old data is carrying over.
Yea, I've done a few factory resets by holding in the n key when powering on. I've also cleared the Dalvik cache, /data and /system in Recovery.
Guit4eva said:
Yea, I've done a few factory resets by holding in the n key when powering on. I've also cleared the Dalvik cache, /data and /system in Recovery.
Click to expand...
Click to collapse
What version of CWM are you using to do the clearing of /data? You must use version 3.2.0.1 or newer or /data will not clear properly on the newer Nooks.
poesntr pugilism
I'm using 3.2.0.1
Guit4eva said:
I'm using 3.2.0.1
Click to expand...
Click to collapse
The reason the bootable cards are working is because they start with a clean /data. The reason stock works is because the /data is setup properly to run with stock. I still believe there is stuff carrying over in the /data on emmc. I don't know more to tell you other than to keep trying to clear /data on emmc with CWM. Watch for error messages when you do.
You are using the CWM on the bootable SD from the eyeballer thread aren't you? Not the one on the dual boot card or emmc?
aphiFnt jot
It's weird though, because I've been clearing it constantly for like 3 days trying to fix it. Maybe I need a later version of CWM? Where can one find the latest version?
The filename of the one I'm using at the moment is: "1gb_clockwork-3.2.0.1-eyeballer.img"
Guit4eva said:
It's weird though, because I've been clearing it constantly for like 3 days trying to fix it. Maybe I need a later version of CWM? Where can one find the latest version?
The filename of the one I'm using at the moment is: "1gb_clockwork-3.2.0.1-eyeballer.img"
Click to expand...
Click to collapse
Look at my tips thread in my signature. There is a link to version 5+ in there. Flash it to emmc and use that.
Thank you I'm going to download that now and try it, I will report back what happens
I'm still on the triple boot on SD (on which the wifi was working), but now when I turned the screen on from sleeping, the wifi isn't working anymore! It just goes "scanning....connectng...disconnected" and loops like that. I've tried forgetting the connection, and turning my wifi off and back on again, but it's still not working. What on earth is going on with my Nook??
Guit4eva said:
I'm still on the triple boot on SD (on which the wifi was working), but now when I turned the screen on from sleeping, the wifi isn't working anymore! It just goes "scanning....connectng...disconnected" and loops like that. I've tried forgetting the connection, and turning my wifi off and back on again, but it's still not working. What on earth is going on with my Nook??
Click to expand...
Click to collapse
CM9 tends to do that. Try CM7.... You know it may be your nook is defective somehow.
That IS with CM7 Flip, I hope it's not a problem with the actual Nook, cause there's 0% chance of getting another any time in the near future. It also often freaks out, as if it is getting many ghost touches. I have to turn off the screen fror a while to fix that. This is such a downer
ps, I can't seem to figure out how to use that new CWM. I'm used to making a bootable SD with the eyeballer IMG file, but this one is just a zip. How do I use it to make the bootable SD? Sorry if it's a dumb question, but I really don't understand
Guit4eva said:
ps, I can't seem to figure out how to use that new CWM. I'm used to making a bootable SD with the eyeballer IMG file, but this one is just a zip. How do I use it to make the bootable SD? Sorry if it's a dumb question, but I really don't understand
Click to expand...
Click to collapse
OK, that zip was meant for flashing to your emmc. If you want to use it in a bootable SD follow these instuctions. Put eyeballers SD in your PC. Unzip the downloaded racks CWM zip. There will be two files in the root, uRecImg and uRecRam. Copy those to the SD. On the SD will be two other files, uImage and uRamdisk. Rename those to .bak. Then rename uRecImg to uImage and uRecRam to uRamdisk. Now you can remove the SD and put in the nook and boot. You should now have the new 5+ CWM.
Thanks I'm still a bit confused though, don't you make a bootable CWM SD so that you can boot into CWM from the sd card and THEN flash CM7 or CM9 to your Nook? How would I flash CWM to emmc?
Guit4eva said:
Thanks I'm still a bit confused though, don't you make a bootable CWM SD so that you can boot into CWM from the sd card and THEN flash CM7 or CM9 to your Nook? How would I flash CWM to emmc?
Click to expand...
Click to collapse
Use the 3.2.0.1 card to flash the new Racks CWM. It will put it on emmc for use later. Then you can boot to it directly using the keys at boot time. It's been so long since I have used stock I can't remember the key combinations. Or you can flash CM7 to emmc with 3.2.0.1 and use the boot menu that comes with CM7 to boot to emmc recovery, which is now 5+. Then you can use that to wipe /data or flash new ROMs.
Hey again Last night I tried for quite a while to get that CWM5 to work, by making an eyeballer boot sd, then putting those two files in the CWM5 zip in place of the existing ones. But when I turn the Nook on, it just hangs at the CWM loading screen (with the 2 skulls)?
Hello,
I was running one of the CM9 nightlies and decided to try one of eyeballer's with OpenGL, and was able to make the switch without any problems, but after a while wanted to go to a non-openGL build and after flashing it my Nook won't boot past the loading screen.
I have a 1GB card with CMW which I'm able to boot to, I've tried wiping data, format boot and format system and reinstalling one of the builds that had previously worked, but still get stuck on Cyanoboot's loading screen. Even tried going back down to CM7 to see if that helped, but stuck on that loading screen as well.
What am I missing here? I've formatted boot, system, cache, data, everything, but the issue persists.
Any suggestions as to how I can make my Nook come back to live.
ryuz4ki said:
Hello,
I was running one of the CM9 nightlies and decided to try one of eyeballer's with OpenGL, and was able to make the switch without any problems, but after a while wanted to go to a non-openGL build and after flashing it my Nook won't boot past the loading screen.
I have a 1GB card with CMW which I'm able to boot to, I've tried wiping data, format boot and format system and reinstalling one of the builds that had previously worked, but still get stuck on Cyanoboot's loading screen. Even tried going back down to CM7 to see if that helped, but stuck on that loading screen as well.
What am I missing here? I've formatted boot, system, cache, data, everything, but the issue persists.
Any suggestions as to how I can make my Nook come back to live.
Click to expand...
Click to collapse
Well, for one thing, never format boot.
After trying cm7, you still get cyanoboot? It should have changed to the green cyanogenmod logo. If not then your flashes are not working.
Sent from my Nook Color running ICS and Tapatalk
After flashing CM7 I get the green boot screen, but my Nook also gets stuck on that loading screen.
When flashing CM9 I can press the ''N'' button and scroll the available boot methods, but when I choose one I get stuck on loading again.
So on both CMs I'm getting stucked on ''loading'', which started to happen on Monday after going from one of the openGL builds to the latest non-openGL build.
ryuz4ki said:
After flashing CM7 I get the green boot screen, but my Nook also gets stuck on that loading screen.
When flashing CM9 I can press the ''N'' button and scroll the available boot methods, but when I choose one I get stuck on loading again.
So on both CMs I'm getting stucked on ''loading'', which started to happen on Monday after going from one of the openGL builds to the latest non-openGL build.
Click to expand...
Click to collapse
Ok, that means that CWM is putting the boot files on the boot partition since they change CM7 vs CM9.
Which version is your CWM on the SD?
You can't boot to anything, not even emmc recovery? Or you just can't boot to 'normal'? Do you even have emmc recovery installed? If you don't, get the first file on this post and flash it with your CWM card. You may be in a recovery bootloop, without a recovery.
http://forum.xda-developers.com/showthread.php?p=21932561
Sent from my Nook Color running ICS and Tapatalk
Thank you leapinlar, seems like it was me having an old CWM on my boot card that wasn't helping me, installed the recovery zip and manage to boot into that from cyanoboot's loading screen and reflashed and managed to boot my Nook.
I'm still intrigue as to how this happened, do you think that when switching between openGL and non-openGL the boot partition got corrupted or something? I've been flashing many roms for almost a year and had never had this issue happen to me before.
Thanks a million for taking time to help me, you're a life saver.
ryuz4ki said:
Thank you leapinlar, seems like it was me having an old CWM on my boot card that wasn't helping me, installed the recovery zip and manage to boot into that from cyanoboot's loading screen and reflashed and managed to boot my Nook.
I'm still intrigue as to how this happened, do you think that when switching between openGL and non-openGL the boot partition got corrupted or something? I've been flashing many roms for almost a year and had never had this issue happen to me before.
Thanks a million for taking time to help me, you're a life saver.
Click to expand...
Click to collapse
It's possible your recovery somehow got corrupted during the flash. If that happens, it does not clear the recovery boot flag and it keeps trying to boot to recovery and it can't because it is corrupted. And it just bootloops forever.
Also, make sure your CWM bootable card is a recent version. If you have a newer nook and an old CWM and you try to clear data, it fails and you have a mess.
Hi, I am totally new at this but I been having a nook color for over a year now and been running CM7 on it for the longest time. Tonight I wanted to put CM9 on and for whatever I did now I just can't seem to get pass the Cyanoboot screen. Doesnt matter what I do it just gives me a blank screen and stays there. What do I gotta do to fix it or get rid of this cyanoboot and back to CWM so i can re flash everything. Any help would be great. Thanks
huyroy said:
Hi, I am totally new at this but I been having a nook color for over a year now and been running CM7 on it for the longest time. Tonight I wanted to put CM9 on and for whatever I did now I just can't seem to get pass the Cyanoboot screen. Doesnt matter what I do it just gives me a blank screen and stays there. What do I gotta do to fix it or get rid of this cyanoboot and back to CWM so i can re flash everything. Any help would be great. Thanks
Click to expand...
Click to collapse
Try flashing latest CM7 then CM9 over the top. Might want to format Data and wipe caches in between.
DizzyDen said:
Try flashing latest CM7 then CM9 over the top. Might want to format Data and wipe caches in between.
Click to expand...
Click to collapse
I cant flash anything right now. I cant go into CWM and it just stuck at the cyanoboot screen and whatever choice i pick from that screen will give me a blank screen.
huyroy said:
I cant flash anything right now. I cant go into CWM and it just stuck at the cyanoboot screen and whatever choice i pick from that screen will give me a blank screen.
Click to expand...
Click to collapse
Try using my bootable CWM card in my tips thread in my signature. It works fine under ordinary circumstances, but I have been wanting someone to try it to see if it gets you out of that bootloop.
Edit: Just a question out of curiosity. When you finished flashing that new ROM with your CWM, were you able to reboot from CWM normally using the menu choice? Or was there some lockup or something where you had to reboot from CWM by hard powering off?
leapinlar said:
Try using my bootable CWM card in my tips thread in my signature. It works fine under ordinary circumstances, but I have been wanting someone to try it to see if it gets you out of that bootloop.
Edit: Just a question out of curiosity. When you finished flashing that new ROM with your CWM, were you able to reboot from CWM normally using the menu choice? Or was there some lockup or something where you had to reboot from CWM by hard powering off?
Click to expand...
Click to collapse
I believe i had to powering off. I'm sorry but I didnt quite understand what you told me to do with the bootable CWM. I am fairly new to all this flashing ROMS crap. If u can explain it a lil bit better that would be greatly appreciated.
huyroy said:
I believe i had to powering off. I'm sorry but I didnt quite understand what you told me to do with the bootable CWM. I am fairly new to all this flashing ROMS crap. If u can explain it a lil bit better that would be greatly appreciated.
Click to expand...
Click to collapse
Just follow the directions in the thread to make the card. Then put it in the nook and try booting. If it boots to CWM, just use it to flash like DizzyDen said. And when you exit, use the menu to choose re-boot.
PS, the hard powering off caused the problem. CWM was not able to clear the recovery flag and you ended up in a recovery bootloop. Let me know if my card boots.
leapinlar said:
Just follow the directions in the thread to make the card. Then put it in the nook and try booting. If it boots to CWM, just use it to flash like DizzyDen said. And when you exit, use the menu to choose re-boot.
PS, the hard powering off caused the problem. CWM was not able to clear the recovery flag and you ended up in a recovery bootloop. Let me know if my card boots.
Click to expand...
Click to collapse
Ok I read the instruction, i know i gotta put the bootable CMW Recovery SD. you said the file is attached to the board... what board? where can i get this file? lol thanks
huyroy said:
Ok I read the instruction, i know i gotta put the bootable CMW Recovery SD. you said the file is attached to the board... what board? where can i get this file? lol thanks
Click to expand...
Click to collapse
Look at the link in my signature. If you read the instructions, scroll to the bottom. Attached to that post.
leapinlar said:
Look at the link in my signature. If you read the instructions, scroll to the bottom. Attached to that post.
Click to expand...
Click to collapse
I got it to work, thanks alot running 4.0.4 now. Slightly choppier than the CM7 I had on but whatever lol
huyroy said:
I got it to work, thanks alot running 4.0.4 now. Slightly choppier than the CM7 I had on but whatever lol
Click to expand...
Click to collapse
Thank YOU for testing my card and proving that gets you out of the recovery bootloop you were in.
You need to take one more step. You need to put a new CWM back on your internal memory so it is there ready for the next time you want to install a ROM. If you go back to my tips thread, there is a link to a new flashable CWM zip (version 5.5.0.4) that can be put on your internal memory. The link is in item B1. Just download that zip file, then boot one more time to my bootable CWM card and install that zip. You should not need my card anymore after that unless you get in a bootloop again.
I've had something similar going on. I believe my nook has been using the EMMC to boot. It was on CM7. I grabbed the latest open GL CM9 because I plan on giving this to my parents. I wanted them to be able to use the TWC TV/DVR app which only works on ICS. I am stuck in a loop where it keeps going to recovery and neither flashing cm9 again nor recovering to an old back up is working. Is the recovery SD card the suggested method for fixing this? I'm not stuck in a loop but I am stuck and having to go into recovery every boot.
For awhile, the N menu gave me both EMMC and SD card boot options. Now it only has EMMC ones.
NapalmDawn said:
I've had something similar going on. I believe my nook has been using the EMMC to boot. It was on CM7. I grabbed the latest open GL CM9 because I plan on giving this to my parents. I wanted them to be able to use the TWC TV/DVR app which only works on ICS. I am stuck in a loop where it keeps going to recovery and neither flashing cm9 again nor recovering to an old back up is working. Is the recovery SD card the suggested method for fixing this? I'm not stuck in a loop but I am stuck and having to go into recovery every boot.
For awhile, the N menu gave me both EMMC and SD card boot options. Now it only has EMMC ones.
Click to expand...
Click to collapse
You could try the new CWM SD. Just make sure when you finish using CWM to exit from that by using the 'reboot' choice in the menu. Do not just hard power off.
leapinlar said:
You could try the new CWM SD. Just make sure when you finish using CWM to exit from that by using the 'reboot' choice in the menu. Do not just hard power off.
Click to expand...
Click to collapse
So slap the image on a clean SD card and boot up from it. After it's done and I hit reboot, what would I do to get back to CM7 or CM9? I haven't had to do something like this yet. Any time I've had issues, I've been lucky enough to go back to a saved clockwork backup and restore things back to how they should be
NapalmDawn said:
So slap the image on a clean SD card and boot up from it. After it's done and I hit reboot, what would I do to get back to CM7 or CM9? I haven't had to do something like this yet. Any time I've had issues, I've been lucky enough to go back to a saved clockwork backup and restore things back to how they should be
Click to expand...
Click to collapse
First thing I would try is just to exit the new CWM via the menu to see if it gets you out of the bootloop. Retry booting without the SD in. If it will still only boot to recovery, I would again boot to my CWM and flash the new recovery to emmc. Next I would try to restore your old nandroid backup with the new CWM. If none of that works, flash a new CM to emmc with the new CWM.