Database Users

[REQ] Samsung i9000T (HKTTTT) Stock firmware

Hi Folks,
Does anybody has a stock I9000T (HKTTTT) firmware, been looking all over just in case I have to return for warranty and no luck yet...
Thanks for reading!

http://forum.xda-developers.com/showthread.php?t=907701

Yes, thanks, that version is for Virgin Islands, TTTT is for Trinidad Tobago. Really searching for that one.

Any luck in finding the TTT version? i9000T
I was also looking for this version as I have a Latin America version of the i9000T Unlocked and trying to get it to 2.2.1 version i9000TUBJP9 .

SPOOFFW - works for me from original i9000t

Latest Official SGS2 STOCK (UK) ROM

Hi,
I have officially become a SGS2 owner from today, having lost my dear HTC Desire, I decided that it was time for a change.
I have a Locked 3 Network SGS2 which I rooted successfully, but want to flash the latest 'official stock rom'...I had comeacross [ROM+Guide]Official i9100 Firmwares KG1/2/3/5/6/7, KH1/2/3/4, KI1/2/3/4/8 thread and was a bit confused to which is the latest; 'Intratech' states that the latest firmware is listed at the bottom which is 'DXKH2' which is '2.3.3' but beyond that list he states:
'All packages below this point have the old bootloader so you can safely reset the binary counter with a Jig.
If you've already flashed a full package from elsewhere or updated using KIES and cannot reset your binary counter using the Jig just flash this package in the PDA or Bootloader section of Odin to replace the bootloaders and then you can reset the counter: http://www.multiupload.com/LQQBRQVJUD'
Click to expand...
Click to collapse
End of that list is: XWKI8 (Android 2.3.5)
And, there is some more firmwares, I'm not sure if he means end of the post #2 or end of that warning. Please can someone clarify this for me.
How can I get 2.3.5 (latest)?
Much Appreciated!

KI8 is the latest release, but its for Nordic region.
2.3.5 has not been released for all regions.
Sent from my GT-I9100 using Tapatalk

sileshn said:
KI8 is the latest release, but its for Nordic region.
2.3.5 has not been released for all regions.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks, but could you then tell me what is the latest version for my country UK?

After KH2 the next release in the thread KI range has a locked bootloader .
#This means the USB jig no longer resets the custom rom counter to zero .
Custom rom counter goes up one everytime a custom rom or root rom is flashed as both void warranty .
Intratech has packed those later roms with the old bootloader therefore they are hybrids .
The latest official rom is via Kies firmware update for your phone .
As posted above latest official stock rom KH2 posted after that they are non official hacked roms .
KG5 is 2.3.4 in non hacked roms .
XXKG5
Firmware info
PDA:XXKG5
PHONE: XXKG5
Date: 27/07/2011
Android 2.3.4
OXA Poland: http://www.multiupload.com/W5EX7FO1YY
XXKG5 Stock Kernel: http://www.multiupload.com/VB3V2ZZ4GW
Password: [email protected]
KI3/8 in hacked roms is 2.3.5
jje
jje
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
KF3 is the latest general UK release .
CPW version in that link .
jje

JJEgan said:
After KH2 the next release in the thread KI range has a locked bootloader .
#This means the USB jig no longer resets the custom rom counter to zero .
Custom rom counter goes up one everytime a custom rom or root rom is flashed as both void warranty .
Intratech has packed those later roms with the old bootloader therefore they are hybrids .
The latest official rom is via Kies firmware update for your phone .
As posted above latest official stock rom KH2 posted after that they are non official hacked roms .
KG5 is 2.3.4 in non hacked roms .
XXKG5
Firmware info
PDA:XXKG5
PHONE: XXKG5
Date: 27/07/2011
Android 2.3.4
OXA Poland: http://www.multiupload.com/W5EX7FO1YY
XXKG5 Stock Kernel: http://www.multiupload.com/VB3V2ZZ4GW
Password: [email protected]
KI3/8 in hacked roms is 2.3.5
jje
jje
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
KF3 is the latest general UK release .
CPW version in that link .
jje
Click to expand...
Click to collapse
Many thanks. Just to make it clear, I am after a Official Samsung released STOCK UNBRANDED ROM for UK which has not been modified in any shape or form as is recognised with 'Kies'

KF3 then with the CPW csc its carphone warehouse unbranded and csc covers most UK networks .
jje

JJEgan said:
KF3 then with the CPW csc its carphone warehouse unbranded and csc covers most UK networks .
jje
Click to expand...
Click to collapse
Sorry for being a plague. As I am new to SGS2 Dev, I'd appreciate if you could tell me the exact firmware name of 'KF3'. Thanks!

BUMP
10char

Your not backwards in coming forward. Be a little more patient in future before bumping, You are probably excited but being on the latest rom isn't suddenly going to make the phone morph into a stealth jet! There's not much point in sticking with official as for warentee repair, you will need to go back to three branded rom (probably)
you need: PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100CPWKH1
Welcome and good luck.
DO NOT INSTANTLY USE ODIN WITHOUT READING THE FORA OTHERWISE YOU WILL BRICK YOUR PHONE. AVOID PIT FILE OR REPARTITIONING.

should be XWKI4
I have PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: XEUKH2

CPW (Carphone Warehouse UK): http://www.multiupload.com/00RKZQ4ZM3
KF3
KI4 as posted is hacked boot loader i believe .
Me i wait for II1.
jje

I need to send my phone back to cpw for repair, what firmware should I revert to, I flashed ki8 on friday.

Hi,
Here are the full details (spliced from http://forum.xda-developers.com/showthread.php?t=1075278):
XWKF3
Firmware info
PDA:XWKF3
PHONE: XXKE7
Build date: 09/06/2011
XEU (Generic UK+Europe) : http://www.multiupload.com/ZZYM5ZAFA0
CPW (Carphone Warehouse UK): http://www.multiupload.com/00RKZQ4ZM3
I personally used the XEU one as it is the most generic.
Don't forget to follow one of the many flashing guides on the forum. I found once I had done the first factory reset I had to do a second one in order for it to pick up the new letter code (XEU).
Then, you can either update to XWKI4 through Kies and get a locked bootloader (but newer android version 2.3.4), plus the handset will still be updateable through Kies because it's all 'official' - or you can flash one from the above thread which has an unlocked bootloader. Or if you are feeling adventurous try one of the hacked 2.3.5.
Thanks

drspikes said:
Your not backwards in coming forward. Be a little more patient in future before bumping, You are probably excited but being on the latest rom isn't suddenly going to make the phone morph into a stealth jet! There's not much point in sticking with official as for warentee repair, you will need to go back to three branded rom (probably)
you need: PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100CPWKH1
Welcome and good luck.
DO NOT INSTANTLY USE ODIN WITHOUT READING THE FORA OTHERWISE YOU WILL BRICK YOUR PHONE. AVOID PIT FILE OR REPARTITIONING.
Click to expand...
Click to collapse
That is not the case. I have have knowledge in ROMs and Kernals as such, I just bought a SGS2 but before I using it I wanted to debrand it and stay updated, so that's why I asked for the latest stock rom.
Nothing more, Nothing less.

pislari_tatiana said:
should be XWKI4
I have PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: XEUKH2
Click to expand...
Click to collapse
+1
Latest provider independent firmware
Product code: GT-I9100LKAXEU
Last modified: 2011-09-16
Latest firmware: I9100XWKI4/I9100XEUKH2/I9100XXKI1/I9100XWKI4
Version: Android 2.3.4

I currently have:
Kernal: XWKI4
Baseband: XXKI1
...installed, it is a CPW version, but I was wondering if there is an STOCK latest Generic UK based version 2.3.5 ROM available?

Hi the latest 2.3.5 is on lies for there I'm on it now
Sent from my GT-I9100 using xda premium

Is that for xeu?
Sent from my GT-I9100 using xda premium

It's still showing KI4, KI1, KH2 for XEU on my version of kies...

SAMSUNG GT-I9000M (MEA)Unlock(EZIest way)

shortest nd eziest way
dnld Official ROM of 2.2 FROYO from
http://forum.xda-developers.com/showthread.php?t=1102881
for GT-I9000M Canada http://www.mediafire.com/?7gi7zib68djai0p
for GT-I9000 (MEA) http://www.mediafire.com/?0744vb4zn3wv411
------------------- BY ODIN ------------------------
flash it with
PDA: MEA pda file
Phone: Canada version
CSC: MEA CSC file
___ format and wipe cash after rebooting from recovery screen ___
_________________________________________________________
have a honey time with GALAXY Bell (GT-I9000M) unlocked in MEA region
------------------------------------------------------------------
tested with Gingerbread 2.3.3 version by same way 100% OK
------------------------------------------------------------------
--------------------------------------------------------------------
frankly it's my first time , never Cn Galaxy phones.
----------------------------------------------------------------------

How is this better than,
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
KC1 modem? vs KG3
Or, perhaps I don't understand what MEA is? Can you clarify?

i think he meant Middle East Area

nyloncrack said:
How is this better than,
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
KC1 modem? vs KG3
Or, perhaps I don't understand what MEA is? Can you clarify?
Click to expand...
Click to collapse
=======================================================
PAL:
FROYO 2.2
UGKC1:modem
http://www.mediafire.com/?1e63a71o2o1gzzo
---------------------- and -----------------------
Gingerbread 2.3.3
UGKG3:modem
http://www.mediafire.com/?092cn706sw3or0o
tested and work OK
---------
MEA (Middle East ) cuz we are in IRAQ, we need Arabic and network to calling
the original (GT-I9000M) is Canadian version and English (Arabic not included)
and when we try to soft with Arabic version it become (GT-I9000) with out (M)
and the network not found and we can't make a call(No service).
therefor I thougt to solve this problem (as a first test) -never seen Galaxy Phones indeed- and softed by (above/below) procedure
PDA= Arabic (GT-I9000) Gingerbread 2.3.3 MEA
CSC=Arabic (GT-I9000) Gingerbread 2.3.3 MEA
Phone=Canadian (GT-I9000M) Gingerbread 2.3.3 North America (I9000M)
tested with both versions
My honey Regards to all

I9001 new firware

Samsung just relese a new firmware for our phone Italy (Vodafone) 2012 December Android 2.3.6 I9001BUKPC I9001OMNKP5 : I9001BUKPC_I9001OMNKP5_OMN. Can some one flas and test this rom and see how its run?
Download link : http://www.hotfile.com/dl/190278997/db50de7/I9001BUKPC_I9001OMNKP5_OMN.zip.html

should one flash it with odin or simply in recovery?

AW: I9001 new firware
Stockroms are always been flashed with Odin.
Germany also got an update in December. Touchwiz bug was still present, so I think same bugs on this stockrom. But I won't test it.

It can be this firmware with fixed TW bug for EU. Which baseband does it have?

Karls0 said:
It can be this firmware with fixed TW bug for EU. Which baseband does it have?
Click to expand...
Click to collapse
Face it, they will never fix tw for us. Ever.

Has nothing to do with development. Do not post it there.

Any rom For Orange Spain?
Hello from spain

TW4 still bugged
The only stock rom with TW4 fixed is ZSKPC for China, Taiwan and Hong Kong, unfortunately only English and Chinese is available as language on such versions.
Baseband is BUKPC

[Q] Which kitkat version should i choose? I9500

Hello Xda community,
Personally i own an unbranded GS4 i9500( currently i have Android Jellu Bean) and i wanted to know which version of kit kat is the best to update to, since there are many options in sammobile.
- Country: India
PDA: I9500XXUFNB3
CSC: I9500ODDFNB3
And the rest are from different countries(Trinidad and Tobago, Saudi Arabia, Vietnam, Thailand, Malaysia, Singapore, Indonesia) but they have the same PDA and CSC, unfortunately it isnt released in my country yet...
PDA: I9500XXUFNB7
CSC: I9500OLBFNB4
Thank you in advance

The best u can do for avoid problems is:
1- Conect it to Kies 3 for know ur code region. CSC are the 3 letters btw parenthesis. The list of codes for region is HERE
2- Wait the update for ur code region. Why? Each country is different (some have LTE, others only 3g, differents modems, etc).
3- If its try for try.... select the one u wish but take care of the step 2 :highfive:

Indian one is quite stable and battery friendly.

exynoss said:
Indian one is quite stable and battery friendly.
Click to expand...
Click to collapse
Im from Argentina, is it ok if i flash the indian one? i doubt that the Argentinian firmware will be released any time soon..

Both are safe
Gab! said:
Im from Argentina, is it ok if i flash the indian one? i doubt that the Argentinian firmware will be released any time soon..
Click to expand...
Click to collapse
As the i9500 does not have LTE, is safe to flash both. I did saw some improvments in phone calls and time to do the call in the indian version from the latest Omega Rom. The v18 was based on Russian version and v19 is based on indian.
Hope this help.