Hi,
I have officially become a SGS2 owner from today, having lost my dear HTC Desire, I decided that it was time for a change.
I have a Locked 3 Network SGS2 which I rooted successfully, but want to flash the latest 'official stock rom'...I had comeacross [ROM+Guide]Official i9100 Firmwares KG1/2/3/5/6/7, KH1/2/3/4, KI1/2/3/4/8 thread and was a bit confused to which is the latest; 'Intratech' states that the latest firmware is listed at the bottom which is 'DXKH2' which is '2.3.3' but beyond that list he states:
'All packages below this point have the old bootloader so you can safely reset the binary counter with a Jig.
If you've already flashed a full package from elsewhere or updated using KIES and cannot reset your binary counter using the Jig just flash this package in the PDA or Bootloader section of Odin to replace the bootloaders and then you can reset the counter: http://www.multiupload.com/LQQBRQVJUD'
Click to expand...
Click to collapse
End of that list is: XWKI8 (Android 2.3.5)
And, there is some more firmwares, I'm not sure if he means end of the post #2 or end of that warning. Please can someone clarify this for me.
How can I get 2.3.5 (latest)?
Much Appreciated!
KI8 is the latest release, but its for Nordic region.
2.3.5 has not been released for all regions.
Sent from my GT-I9100 using Tapatalk
sileshn said:
KI8 is the latest release, but its for Nordic region.
2.3.5 has not been released for all regions.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks, but could you then tell me what is the latest version for my country UK?
After KH2 the next release in the thread KI range has a locked bootloader .
#This means the USB jig no longer resets the custom rom counter to zero .
Custom rom counter goes up one everytime a custom rom or root rom is flashed as both void warranty .
Intratech has packed those later roms with the old bootloader therefore they are hybrids .
The latest official rom is via Kies firmware update for your phone .
As posted above latest official stock rom KH2 posted after that they are non official hacked roms .
KG5 is 2.3.4 in non hacked roms .
XXKG5
Firmware info
PDA:XXKG5
PHONE: XXKG5
Date: 27/07/2011
Android 2.3.4
OXA Poland: http://www.multiupload.com/W5EX7FO1YY
XXKG5 Stock Kernel: http://www.multiupload.com/VB3V2ZZ4GW
Password: [email protected]
KI3/8 in hacked roms is 2.3.5
jje
jje
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
KF3 is the latest general UK release .
CPW version in that link .
jje
JJEgan said:
After KH2 the next release in the thread KI range has a locked bootloader .
#This means the USB jig no longer resets the custom rom counter to zero .
Custom rom counter goes up one everytime a custom rom or root rom is flashed as both void warranty .
Intratech has packed those later roms with the old bootloader therefore they are hybrids .
The latest official rom is via Kies firmware update for your phone .
As posted above latest official stock rom KH2 posted after that they are non official hacked roms .
KG5 is 2.3.4 in non hacked roms .
XXKG5
Firmware info
PDA:XXKG5
PHONE: XXKG5
Date: 27/07/2011
Android 2.3.4
OXA Poland: http://www.multiupload.com/W5EX7FO1YY
XXKG5 Stock Kernel: http://www.multiupload.com/VB3V2ZZ4GW
Password: [email protected]
KI3/8 in hacked roms is 2.3.5
jje
jje
---------- Post added at 03:00 PM ---------- Previous post was at 02:56 PM ----------
KF3 is the latest general UK release .
CPW version in that link .
jje
Click to expand...
Click to collapse
Many thanks. Just to make it clear, I am after a Official Samsung released STOCK UNBRANDED ROM for UK which has not been modified in any shape or form as is recognised with 'Kies'
KF3 then with the CPW csc its carphone warehouse unbranded and csc covers most UK networks .
jje
JJEgan said:
KF3 then with the CPW csc its carphone warehouse unbranded and csc covers most UK networks .
jje
Click to expand...
Click to collapse
Sorry for being a plague. As I am new to SGS2 Dev, I'd appreciate if you could tell me the exact firmware name of 'KF3'. Thanks!
BUMP
10char
Your not backwards in coming forward. Be a little more patient in future before bumping, You are probably excited but being on the latest rom isn't suddenly going to make the phone morph into a stealth jet! There's not much point in sticking with official as for warentee repair, you will need to go back to three branded rom (probably)
you need: PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100CPWKH1
Welcome and good luck.
DO NOT INSTANTLY USE ODIN WITHOUT READING THE FORA OTHERWISE YOU WILL BRICK YOUR PHONE. AVOID PIT FILE OR REPARTITIONING.
should be XWKI4
I have PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: XEUKH2
CPW (Carphone Warehouse UK): http://www.multiupload.com/00RKZQ4ZM3
KF3
KI4 as posted is hacked boot loader i believe .
Me i wait for II1.
jje
I need to send my phone back to cpw for repair, what firmware should I revert to, I flashed ki8 on friday.
Hi,
Here are the full details (spliced from http://forum.xda-developers.com/showthread.php?t=1075278):
XWKF3
Firmware info
PDA:XWKF3
PHONE: XXKE7
Build date: 09/06/2011
XEU (Generic UK+Europe) : http://www.multiupload.com/ZZYM5ZAFA0
CPW (Carphone Warehouse UK): http://www.multiupload.com/00RKZQ4ZM3
I personally used the XEU one as it is the most generic.
Don't forget to follow one of the many flashing guides on the forum. I found once I had done the first factory reset I had to do a second one in order for it to pick up the new letter code (XEU).
Then, you can either update to XWKI4 through Kies and get a locked bootloader (but newer android version 2.3.4), plus the handset will still be updateable through Kies because it's all 'official' - or you can flash one from the above thread which has an unlocked bootloader. Or if you are feeling adventurous try one of the hacked 2.3.5.
Thanks
drspikes said:
Your not backwards in coming forward. Be a little more patient in future before bumping, You are probably excited but being on the latest rom isn't suddenly going to make the phone morph into a stealth jet! There's not much point in sticking with official as for warentee repair, you will need to go back to three branded rom (probably)
you need: PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100CPWKH1
Welcome and good luck.
DO NOT INSTANTLY USE ODIN WITHOUT READING THE FORA OTHERWISE YOU WILL BRICK YOUR PHONE. AVOID PIT FILE OR REPARTITIONING.
Click to expand...
Click to collapse
That is not the case. I have have knowledge in ROMs and Kernals as such, I just bought a SGS2 but before I using it I wanted to debrand it and stay updated, so that's why I asked for the latest stock rom.
Nothing more, Nothing less.
pislari_tatiana said:
should be XWKI4
I have PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: XEUKH2
Click to expand...
Click to collapse
+1
Latest provider independent firmware
Product code: GT-I9100LKAXEU
Last modified: 2011-09-16
Latest firmware: I9100XWKI4/I9100XEUKH2/I9100XXKI1/I9100XWKI4
Version: Android 2.3.4
I currently have:
Kernal: XWKI4
Baseband: XXKI1
...installed, it is a CPW version, but I was wondering if there is an STOCK latest Generic UK based version 2.3.5 ROM available?
Hi the latest 2.3.5 is on lies for there I'm on it now
Sent from my GT-I9100 using xda premium
Is that for xeu?
Sent from my GT-I9100 using xda premium
It's still showing KI4, KI1, KH2 for XEU on my version of kies...
Related
Hello everyone today I stuck my galaxy's code dbt at Kies and I found this update as phone is jpy so I guess it's Froyo 2.2.1 but i don't share image with u because xda will not let me
Its posted on Samfirmwares last month .
jje
yes but now is aviable trought kies so is official
Any Link for this guys? i would like to revert to original DBT (2.2.1) in this case so i can be prepared for future updates.
Available via KIES for DBT:
PDA: JQ3
Phone: JPY
CSC: JS2
Hello I've my SGS code DBT with a costum rom.
I want official 2.2.1 DBT but kies 2 says no firmware update vaid with costum rom
How I have to do ?
Thanks.
If I use odin to make older official firmware product code change to KOR and kies no update the sgs.
Pleasze help.
The kies path don't work with kies 2
You flash with odin You original 2.2 rom and user kies tu update at 2.2.1
Sent from my GT-I9000 using XDA App
titorez said:
Any Link for this guys? i would like to revert to original DBT (2.2.1) in this case so i can be prepared for future updates.
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=985565
Hey there, this is my first post on this site.
I searched google extensively and was unable to find the original firmware for my phone. It is on crazy johns.
I currently have froyo 2.2.1 with:
PDA: I9000XXJPU
PHONE: I9000 XXJPU
CSC: I9000 OXAJPU
Build Info: 2010. 12.
Do you mean the original network branded firmware that came with the phone .
You either saved a copy or you find somebody that saved a copy .
Or use the non branded stock samsung firmware from samfirmware and flash via Odin .
jje
Crazy Johns is just a Vodafone subsidiary. So you'd probably have the Vodafone Australia model. Product code VAU.
If CJs was not doing the Voda branded model, then they'd be doing the generic unbranded Australian firmware, which is product code XSA.
Just remembered their is an OZ thread on here somewhere might get more info from the guys on that post .
jje
Thanks for that I'll look it up.
Do you have any idea what firmware I currently have? I've been looking into this on and off for a month and nothing has really come up to help me.
ive just got 2.3.3 on my sgs from kies.wwwoooohhhhoooo.
Heard you the first time mate: http://forum.xda-developers.com/showthread.php?t=1057485
What region ? Which model ? provide more info dude !
My sgs is the i9000 europe version.(i live in the uk)
its an unbranded handset.
Previosly running 2.2.1 froyo.
Now running on the following
firmware version.2.3.3
baseband version.i9000xxjvk
kernal version.2.6.35.7-i9000xwjvb-cl118186 [email protected] #2
build number gingerbread.xwjvb
I've just flashed back to JPY and connected to KIES and no update available. I have an XEU unbranded SGS.
I checked it as well... Nothing for XEU, JPY. It says i have the latest firmware.
Tell me which version of Froyo you were on ?
Another Fake ?
Code:
CheckFusDownloader.exe -c I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY XEU
Model: GT-I9000
PDA: I9000XXJPY
CSC: I9000OXAJPY
PHONE: I9000XXJPY
PCODE: XEU
------== Retrieved info ==------
LATEST_FW_VERSION: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
BINARY_NAME: GT-I9000_XEU_1_20101229144031.zip.enc2
LAST_MODIFIED: 20101229144039
BINARY_CRC: 2928942932
So, no update.
When i re-connect to kies it says "no further updates available for this handset"
Let us know, your Froyo Build ! Then we can be sure, you got it...
3 ppl already tried but no update.!!!
View attachment 582746a screenshot from my phone
Virtualsk said:
Let us know, your Froyo Build ! Then we can be sure, you got it...
3 ppl already tried but no update.!!!
Click to expand...
Click to collapse
There's no update available on Kies for XXJPY with SalesCode XEU. End of story.
Netherlands:
No update.
He is Fooling around then....
checked it as well... Nothing for XEU, JPY,NEE ,XEE ,VOD
And as far as ScreenShot goes ... I can show mine also has JVB .. leaked one ...Come on dude ...!!! Get Real.
Im not sure which version of froyo i was on but when my son comes in with his sgs i will post because his phone is running on the same froyo i was on.when i tried his phone on kies there was no update but im presuming that is because his is a branded t-mobile handset.
Maan... When I first saw this post my heart started pomping like crazy, just to find out it is fake...
Sent from my GT-I9000 using XDA App
Forgot to mention that before the connection to kies i put in an unregistered vodafone pay as you go sim into the phone,not sure if that made a difference.
Just put a screen of your SGS while trying to update it via Kies, we'll see your version detailled (PDA / PHONE / CSC) and your product (or sales) code.
If indeed it is fake then the OP should be banned .
jje
(I tried to use search but it is down).
I have a XEU handset that I de-branded from O2 PAYG. When I connect it to Kies it shows that I am running the latest firmware below even though I am de-branded. I thought hey whole point of being de-branded is getting the latest updates?
Current firmware version: PDA:KE7 / PHONE:KE4 / CDCKD1 (XEU)
Has the de-branding went wrong or is KF1 not out for XEU yet? I know Kies is crap but it is esier (and safer) than Odin.
Thanks.
AaronUK said:
(I tried to use search but it is down).
de-branded. I thought hey whole point of being de-branded is getting the latest updates?
No its to remove branding
Current firmware version: PDA:KE7 / PHONE:KE4 / CDCKD1 (XEU)
Has the de-branding went wrong or is KF1 not out for XEU yet?
Dependant as always upon product code that Kies reads .
jje
Click to expand...
Click to collapse
JJEgan said:
AaronUK said:
(I tried to use search but it is down).
de-branded. I thought hey whole point of being de-branded is getting the latest updates?
No its to remove branding
Current firmware version: PDA:KE7 / PHONE:KE4 / CDCKD1 (XEU)
Has the de-branding went wrong or is KF1 not out for XEU yet?
Dependant as always upon product code that Kies reads .
jje
Click to expand...
Click to collapse
So if it shows that I am running XEU in Kies then why won't it let me upgrade to KF1? Is it even out yet for XEU handsets?
Click to expand...
Click to collapse
kf1 is a leaked build
KE7 is the latest through Kies if you want to get KF1 you'll have to use odin to flash
My Kies still shows KE4 for me.... how do I de-brand to get KE7?
Someone tells that KF1 is a NON official firmware and samsung will release an official firmware only with the 2.3.4
viska81 said:
Someone tells that KF1 is a NON official firmware and samsung will release an official firmware only with the 2.3.4
Click to expand...
Click to collapse
Link to this someone please .
jje
I updated to KF1 and now Kies says this device can not be updated in regards to firmware. Can I just go back to KE7 ?
nookcoloruser said:
I updated to KF1 and now Kies says this device can not be updated in regards to firmware.
No update past KF1 so how can it update something that has no further update released yet .
Can I just go back to KE7
yes see dev section .
jje
Click to expand...
Click to collapse
Can someone help me de-brand my phone? What do I need to do?
As the title says, can anyone tell me the latest UK official firmware for the P6800. If possible, I would also appreciate it if you could include a download link.
Thanks
LQ2 will be the latest
Download here: http://forum.xda-developers.com/showthread.php?p=21930173
Discussion here: http://forum.xda-developers.com/showthread.php?p=30025785
rumpypumpy said:
As the title says, can anyone tell me the latest UK official firmware for the P6800. If possible, I would also appreciate it if you could include a download link.
Thanks
Click to expand...
Click to collapse
I recently got mine from CPW and HC was the latest firmware, no ICS update available.
You can download it from sammobile (there was only one HC firmware available) http://www.sammobile.com/ i cant get to the website at the moment though
nutley said:
I recently got mine from CPW and HC was the latest firmware, no ICS update available.
You can download it from sammobile http://www.sammobile.com/ i cant get to the website at the moment though
Click to expand...
Click to collapse
Sammobile isn't working for me either. Do you know the name of the firmware? (ie.P6800XXLA3...?)
Thank.
If are in the UK should be able to grab it via OTA but once i flashed to ICS I changed my code to the UK one, XEU and once I rebooted, the entire device was wiped although some of my files remained oddly enough the ones on the device itself. Then KIES was able to pick up the device and even OTA showed up and I updated my tab via KIES.
nutley said:
I recently got mine from CPW and HC was the latest firmware, no ICS update available.
You can download it from sammobile (there was only one HC firmware available) http://www.sammobile.com/ i cant get to the website at the moment though
Click to expand...
Click to collapse
rumpypumpy said:
Sammobile isn't working for me either. Do you know the name of the firmware? (ie.P6800XXLA3...?)
Thank.
Click to expand...
Click to collapse
@nutley:
1st If your CSC is CPW then your device is from carphone warehouse and it is should be locked to them cause the open firmware is XEU for United Kingdom/Ireleand
2nd There is no CPW firmware for the P6800 and also XEU at sammobile ...
3nd if you can give me some details ill put it on sammobile and on my space for download for all humans
- what i need for this ? please read this Samsung Galaxy Tab 7.7 GT-P6800 & GT-P6810 ProductCode & HIDSWVER its really simple ... just PM me
@rumpypumpy:
1st What is your current Firmware? Can you give me details? Please also read this Samsung Galaxy Tab 7.7 GT-P6800 & GT-P6810 ProductCode & HIDSWVER ... just PM me
2nd If you want you can flash latest firmware with CSC ATO and just change language in to english there is no problem
@the rest of all on xda: If someone purchased a SGT 7.7 P6800 with CSC = XEU just PM the PRODUCTCODE & HIDSWVER then ill get the open Firmware for United Kingdom/Ireland and up it on sammobile and on my space - the humans all over the world will thank you - cause currently there is no download source for this XEU Firmware!
---------- Post added at 05:14 PM ---------- Previous post was at 05:09 PM ----------
ascariss said:
If are in the UK should be able to grab it via OTA but once i flashed to ICS I changed my code to the UK one, XEU and once I rebooted, the entire device was wiped although some of my files remained oddly enough the ones on the device itself. Then KIES was able to pick up the device and even OTA showed up and I updated my tab via KIES.
Click to expand...
Click to collapse
OK. Can you give some details ? Samsung Galaxy Tab 7.7 GT-P6800 & GT-P6810 ProductCode & HIDSWVER ... Just PM me
I downloaded CSC changer for the galaxy S2 on the play market and used that to change the CSC.
rumpypumpy said:
Sammobile isn't working for me either. Do you know the name of the firmware? (ie.P6800XXLA3...?)
Thank.
Click to expand...
Click to collapse
sammobile looks to be back
this is a link to the Austrian ATO firmware that i used to go to ICS and has the HC firmware that i would go back to if needed.
http://www.sammobile.com/firmware/?page=3&model=GT-P6800&pcode=ATO&os=1&type=3#firmware
The HC firmware name is P6800XXLA3_P6800OXALA3_ATO
ascariss said:
I downloaded CSC changer for the galaxy S2 on the play market and used that to change the CSC.
Click to expand...
Click to collapse
okay ...so you also dont have the official UK firmware
I have a P6800 bought from Expanses UK that has a stock HC ROM, and my CSC is XEU, unmodified. I've not had much luck with connecting to Kies but I'll give it a go.
I've been waiting for the ICS OTA update but am about to give up and put the LQ2 ROM on from Samfirmware using Mobile Odin Pro.
JonSlater said:
I have a P6800 bought from Expanses UK that has a stock HC ROM, and my CSC is XEU, unmodified. I've not had much luck with connecting to Kies but I'll give it a go.
I've been waiting for the ICS OTA update but am about to give up and put the LQ2 ROM on from Samfirmware using Mobile Odin Pro.
Click to expand...
Click to collapse
OMG
JonSlater you dont need to wait just go in phone dialer and enter following code: *#*#1234#*#*
now please PM me the following needed informations
PDA: P6800.......
Phone: P6800.......
CSC: P6800.......
Then ill get finally from samsung server the XEU UNITED KINDOM / IRELAND Firmware for every people who needs and put it on sammobile and on my space
xenix96 said:
OMG
JonSlater you dont need to wait just go in phone dialer and enter following code: *#*#1234#*#*
now please PM me the following needed informations
PDA: P6800.......
Phone: P6800.......
CSC: P6800.......
Then ill get finally from samsung server the XEU UNITED KINDOM / IRELAND Firmware for every people who needs and put it on sammobile and on my space
Click to expand...
Click to collapse
I have a UK GT-P6800 bought from Carphone Warehouse on stock HC ROM. When the above code is put into the dialler the following information is revealed
PDA: P6800XXLB4
PHONE: P6800XXLA3
CSC: P6800XEULC2
jeremyr62 said:
I have a UK GT-P6800 bought from Carphone Warehouse on stock HC ROM. When the above code is put into the dialler the following information is revealed
PDA: P6800XXLB4
PHONE: P6800XXLA3
CSC: P6800XEULC2
Click to expand...
Click to collapse
Modified: 06.03.2012 12:02:54
Filename: GT-P6800_XEU_1_20120306120235.zip.enc2
Happy flashing!
Click to expand...
Click to collapse
Okay man the world thank you for this information cause now i downloading the XEU Firmware from samsung server ^^
Cause your CPW Firmware is a modified version of the official XEU firmware by Carphonewarehouse
Can you please enter following code in your phone dialer: *#*#83052020100812173552301071192687#*#*
I want to know now what salescode you have CPW or XEU -> i think CPW like the picture i attached.
And when you connect with Kies what says kies ? Your device is supported ??? or does not support software upgrading via Kies ??? like the 2nd picture i attached
It would be nice when you can give me this last informations
ill uploading now the official firmware for UNITED KINGDOM/IRELAND CSC XEU on my space - then all who want can download it
xenix96 said:
OMG
JonSlater you dont need to wait just go in phone dialer and enter following code: *#*#1234#*#*
now please PM me the following needed informations
PDA: P6800.......
Phone: P6800.......
CSC: P6800.......
Then ill get finally from samsung server the XEU UNITED KINDOM / IRELAND Firmware for every people who needs and put it on sammobile and on my space
Click to expand...
Click to collapse
From RegEdit:
ProductCode: GT-P6800LSAXEU
HIDSWVER: P6800XXLB4/P6800XEULC2/P6800XXLA3/P6800XXLB4
From Dialer:
PDA: P6800XXLB4
PHONE: P6800XXLA3
CSC: P6800XEULC2
Sales Code: XEU (goodness, that was a long dialer code!)
Still can't get it to connect to Kies reliably. From memory, last time it said it couldn't start the service on my device. This time when I plugged the cable in I got an error saying the CDC Abstract Control Module driver hadn't been installed.
JonSlater said:
From RegEdit:
ProductCode: GT-P6800LSAXEU
HIDSWVER: P6800XXLB4/P6800XEULC2/P6800XXLA3/P6800XXLB4
From Dialer:
PDA: P6800XXLB4
PHONE: P6800XXLA3
CSC: P6800XEULC2
Sales Code: XEU (goodness, that was a long dialer code!)
Still can't get it to connect to Kies reliably. From memory, last time it said it couldn't start the service on my device. This time when I plugged the cable in I got an error saying the CDC Abstract Control Module driver hadn't been installed.
Click to expand...
Click to collapse
You ever tried following step ?
1st start KIES wait till loaded
2nd On top menu click "Tools" then click "Troubleshoot connection error" (like the screenshoot i attached)
3rd Wait till procedure is end
4th Connect your device
it should help
Mine has the same sales codes and will connect to Kies. It's a bit flakey at times but it gets there in the end. My old GT-P1000 was the same.
Kies reports no update avaiable.
same here showing xeu in kies and no update but working ok so far Play Movies just popped up first time I had seen it on the 7.7
Thanks
rumpypumpy said:
As the title says, can anyone tell me the latest UK official firmware for the P6800. If possible, I would also appreciate it if you could include a download link.
Thanks
Click to expand...
Click to collapse
Thank you.