Related
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuck in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
If you have constant security S-OFF, it accepts all ROMs and HBoot and RUU. Probably you have engineering Magic (not Hboot, the whole device)
1. Try this...
If fastboot can detect phone, so try flash Amon_RA Hero recovery http://forum.xda-developers.com/showthread.php?t=561124
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
2. Or try run another RUU
5[Strogino] said:
Oh... you have S_OFF after official upgrade, it isn't often to meet.
If fastboot can detect phone, so try flash Amon_RA Hero recovery
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
Click to expand...
Click to collapse
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
ngecw said:
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
Click to expand...
Click to collapse
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
5[Strogino] said:
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
Click to expand...
Click to collapse
Tried flashing the recovery.img (RA_Hero) but failed.
i typed fastboot flash recovery recovery.img [ renamed the file to recovery.img] but got the error...
sending 'recovery' <3362 KB>... OKAY
writing 'recovery'... FAILED <remote: image type not support>
Just to clarify more, the screen only shows "RUU USB" not "FASTBOOT" although fastboot can see my device... could that be the reason why it failed?
According to your 2nd suggestion, where can i find other RUU and how do i know which is the proper one?
ngecw said:
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuch in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
Click to expand...
Click to collapse
the rogers ROM is not working right. Too many crashes and so on .. so try this one
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
You can download it from HTC main site ...
Also, you have to keep in mind that you can RUU as many as you want. So do the procedure again and keep us posted if it's working. If not send me a PM and i'll resolve it step by step.
best of luck !
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I do have the same problem with my RUU flash with the new Rogers RUU. Stuck at 81% when device starts updating at step[4] "system". Phone will show "unzipping" for over an hour and eventually failed with error code [155].
I tried the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_ NoDriver.exe but still the same problem. Can anyone help here?
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Help
ngecw said:
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Click to expand...
Click to collapse
Same problem here. Can someone help?
Thanks in advance.
ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I had a 32B G2,it was brikked at the first time when I ruu flash the rom(Sense official). G2 couldn't received any RUU rom.it would stop at 22%.
Today,when I ruu flash the rom（HTC_Europe_3.04.401.2）,I also found it stop at 81%.
SPL is updated to 1.76.0008 from 1.76.0007.
It seems much better than before. But it still could not accept the cmd "adb shell"
Hoping somebody could help us.
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Rugga said:
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Click to expand...
Click to collapse
I tried but already got stuck in the first step of unzipping system.img. Looks like this RUU will upgrade system first before HBOOT and RADIO, hence i am still stuck with Perfected SPL.
Given that my phone has security off (SOFF), is there way to downgrade my HBOOT?
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
vbucuroiu said:
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
Click to expand...
Click to collapse
Were you upgraded to the latest perfected SPL when the same problem happens? I had my goldcard configured properly, but everytime i run RUU, the process hang at 81%, which is the time when unzipping system.img happens.
I understanding the latest SPL is still yet hard to crack, but will my phone being S=OFF, can have some ways to get the system check bypassed?
Thanks!
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
(
Nobody knows?
ONX said:
Nobody knows?
Click to expand...
Click to collapse
Same boat...
ONX said:
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
Click to expand...
Click to collapse
What did you do??? 32B Magic not compatible with RUU Upgrades
What exactly do you have? You posted in one place - that you have 32B
But on picture you have 32A
I installing RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
I make a goldcard for installing _HTC Magic_RUU_Sapphire_SMC_Voda_WWE_3.03.990.6_release_signed_NoDriver.exe (with this update can enter in fastboot and vol down + power) but stops when loading system.img
Sorry for my english.
Yes, i have 32B.
Before:
SAPPHIRE PVT 32B Ship S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD 10
RADIO-3.22.20.17
Jun 2 2009 17.28.28
After:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.007 (SAPP10000)
CPLD-10
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
Dear Xda members,
I need your help,
My htc Magic has been damaged!
When I start it, nothing happens.
The recovery mode doesn t work: I can see it but just few seconds.
The fastboot is still working.
Is it possible to rescue my phone?
Many thanks in advance,
D.
If fastboot is working then you are most likely able to fix it! cant give you any details since for some reason, you decided not to provide any details on your phone and what went wrong. now that you know you may be able to fix it, start doing some searches.
Thanks for the answer!
In fact I cannot push the package with adb: it does not recognize my device
Consequently I am not able to flash with fastboot.
Any way to push the files without adb?
Regards,
D.
you can try to copy the update.zip to your sdcard manually with an adapter via computer ...
Yes I tried, but no result, I put the recovery.img in the sdcard
when I run the fastboot I do:
fastboot boot boot.img
I receive
cannot load 'boot.img'
shakapaka said:
Dear Xda members,
I need your help,
My htc Magic has been damaged!
When I start it, nothing happens.
The recovery mode doesn t work: I can see it but just few seconds.
The fastboot is still working.
Is it possible to rescue my phone?
Many thanks in advance,
D.
Click to expand...
Click to collapse
you can try the attach files.
But please be sure your 32A is rooted, and non perfect SPL or original SPL.
convert at fastboot mode, download the four attach files
View attachment 292106
View attachment 292107
View attachment 292108
View attachment 292109
Thank you so much!
But how to use this?
shakapaka said:
Thank you so much!
But how to use this?
Click to expand...
Click to collapse
If you want to use 1.33SPL,then just in fastboot mode, unzip the attach file convert1.33.zip, enter the file, double click the convert.bat, press any key, wait for several mins, your SPL, radio and recovery will be flashed. Reboot in recovery mode flash your ROM(1.33SPL ROM). Before above steps, you should put your ROM on your SD card.
If you want to use 1.76SPL, do the same steps above.(1.76SPL ROM)
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
shakapaka said:
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
Click to expand...
Click to collapse
what is you SPL and radio?
shakapaka said:
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
Click to expand...
Click to collapse
s-on or s-off?
On the fastboot I have:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008
CLPD-12
RADIO-6.35.08.29
shakapaka said:
On the fastboot I have:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008
CLPD-12
RADIO-6.35.08.29
Click to expand...
Click to collapse
Then you shoulde first flash your SPL to 1.33.2010 S-OFF, Radio 3.22.xx.
DON'T FORGET THE COMBINATION SPL 1.33.XX IS FOR RADIO 3.22.XX, SPL 1.76.XX IS FOR RADIO 6.35.XX.
Otherwise, you will brick.
OK, I have searched this. Probably you didn't unlock your bootloader. Boot your phone in fastboot mode. If your OS is windows, win + R, cmd, cd to your "convert1.33" folder. Then try the following code:
fastboot oem unlock
Click to expand...
Click to collapse
Then hit accept to throw out your warranty. This will also cause the signature check to stop failing, allowing you to fastboot flash recovery recovery.img
If this is done, double click convert(wether 1.33 or 1.76). Wait for several mins, job will be done.
If above steps don't work, maybe you need to make a gold card.
Thanks a lot Stuart!
I think my radio is not the original one.
What is better: use 1.76 and up-date the spl or use 1.33 and down-grade the spl?
In any case, how can I do that?
shakapaka said:
Thanks a lot Stuart!
I think my radio is not the original one.
What is better: use 1.76 and up-date the spl or use 1.33 and down-grade the spl?
In any case, how can I do that?
Click to expand...
Click to collapse
Use 1.33 should be better.
First, try this in fastboot mode, "fastboot oem unlock ".
Then double click convert in convert1.33 folder.
If it does not work, try to flash recovery(in the convert1.33 folder) in fastboot.
I have the same problem: My Phone:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009
CLPD-12
RADIO-3.22.20.17
I wanted to load cursor sense, but i have same problem: when i type fastboot flash hboot hbot-1.33.2010.img it says: FAILED (remote: signature verify fail), i've downloaded convert to1.33 files, CD'd to convert1.33 folder , tryed fastboot oem unlock but again, i get COMMAND ERROR.. Thanks
Hello Stuart,
I cannot unlock, it seems the commad does not exist.
I tried the gold card method, but I cannot find my microSD ID
I got some numbers from fsutil, maybe it could help?
Thanks
I've solved my problem... all you need to do is copy spl 1.33.2010 spl ZIPPED in your sd card root, go to recoverz and click on apply update.zip.. wait a second, then reboot..
In fact I do not have the recovery mode anymore
Dear Stuart,
It seems your are in Shanghai,
I am also living in Shanghai
Maybe you know some people to help me in town
Bye
shakapaka said:
In fact I do not have the recovery mode anymore
Dear Stuart,
It seems your are in Shanghai,
I am also living in Shanghai
Maybe you know some people to help me in town
Bye
Click to expand...
Click to collapse
Yes, I am in Shanghai. And are you Chinese or do you understand Chinese? If yes, I can communicate with you easily, for my english is not very good.
The combination of your SPL and Radio is strange. (1.33.xx with 3.22.xx, 1.76.xx with 6.35.xx). But you are 1.33.xx with 6.35.xx.
So, my idea is :
1. convert SPL 1.33.xx to 1.76.xx, or
2. convert Radio 6.35.xx to 3.22.xx
If above two methods are not available, you can try to make a gold card and use RUU to install offical ROM.
Otherwise, you can also go to Shanghai Railway Station. There is a "不夜城" market. You can find a place to repaire your phone(not recommended, maybe expensive). This is the last way.
Ok Guys, I know there are probably millions of threads already started about this, but I really dont know how to put it.
Not long ago I flashed the official 2.2 ROM, and tried to flash DSP manager over it. It didnt work. I couldnt boot into the rom, I had a weird SPL and radio and stock recovery. I made a goldcard, downloaded a SAPPHIMG.nbh file from god knows where, and started again. I have a horrible feeling it might of been the rogers 32A rom.
BUT, I am now stuck on 1.5, Rooted with Super One Click and I cant boot into recovery at all. I cant flash recovery through Clockworkmod, or FlashRec. It flashes it, I just can't boot into the recovery at all! I can't even do it through fastboot, because of my perfected stock SPL. A goldcard doesn't help either, I just keep getting errors. Is it possible to corrupt your recovery partition?
RADIO: 3.22.20.17
CPLD: 10
HBOOT: 1.33.0009
I feel like I'm in a really horrible situation here, but I'm glad its not fully bricked. What Solutions are there to this problem?
Thank you so much guys! I really appreciate your help, in advance
EDIT: I can use fastboot, But I still cant boot recovery, even after flashing it from there. Can I just flash a rom through Fastboot?
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
mumilover said:
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
Click to expand...
Click to collapse
That would be good, If I didnt just wipe the system via fastboot thinking I could just flash another rom..
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
mumilover said:
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
Click to expand...
Click to collapse
I Followed this guide.. http://www.firstdroid.com/tutorials/htc-magic-sapphire-tutorials-htc-magic-sapphire-guias/how-to-load-a-rom-with-fastboot/comment-page-1/#comment-3486 I get a error saying the recovery isn't signed. Latest version of Amon RA.
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
mumilover said:
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
Click to expand...
Click to collapse
Ok, will try that
ketchup539 said:
Ok, will try that
Click to expand...
Click to collapse
Ok, Tried flashing an RUU, would't let me, because the phone had to be switched on and booted into android to do so. I have tried the goldcard more than 8 times, either to get a "main version is older" or "invalid CID" message. What else can I do? Have I effectively bricked my phone?
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Can you also please change the title... it's not that urgent :0)
mumilover said:
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Click to expand...
Click to collapse
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
same boat maybe different scenary, stuck RUU or RUU USB:
Code:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
ketchup539 said:
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
Click to expand...
Click to collapse
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
meupc said:
same boat maybe different scenary, stuck RUU or RUU USB:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
Click to expand...
Click to collapse
You have a different problem... you have wrong spl/radio combo.
But maybe i will test something. Check your pm!
OK, thanks mumilover, replied and added.
mumilover said:
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
Click to expand...
Click to collapse
Fixed! I was on a 32A sappimg.nbh, flashed 2.53.707.2 sappimg.zip which was also 32A, but it booted (!) and from there I was able to flash the original mytouch COC10 cupcake. I ugraded to donut, then flashed the official 2.2 OTA
Thanks for your help
I have the HTC MAGIC
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)( OLD )
CPLD-12
RADIO-6.35.08.29 (NEW )
Oct 21 2009,17:27:03
on the recovery, fastboot, but not on the android, HTC logo hangs at MAGIC
Not the brick is it?
rom which have error "main cũ version" or "Partition update fail"
What your version nr?
Code:
fastboot getvar version-main
version-main: 3.04.401.2
machines are now hanging in the HTC MAGIC logo
[1] BOOTLOADER - OK
[2] SPLASH1 - OK
[3] RECOVERY - OK
[4] BOOT - OK
[5] SYSTEM - Fail-PU
[6] USERDATA - OK
Partition update fail!
Update Fail!
help me !!!
You have radio/spl mismatch...
You got to fix that before you can proceed.
Follow my instructions:
Download this to begin with while you READ.
http://rapidshare.com/files/45099641...al_sappimg.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
Here comes the trick: I have found a special rom, which is part of a 2-part update.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, we need to flash the stock rom and you should almost be there...
Post the progress and we will take it from there.
Hope that you will succeed... :0)
thank you very much, I will try and report back
what is "we need to flash the stock rom and you should almost be there..." ?
Can you give me a rom link fit?
a bit sorry for bad english, I'm a Vietnam
you should probably use this tool next time: forum.xda-developers.com/showthread.php?t=794450
Hi,
I have the same kind of problem.
I have a 32A and I installed the wrong radio/SPL
I have the SPL : 1.33.0013d and the Radio 2.22.27.08.
Can I do this manipulation too ? :
mumilover said:
You have radio/spl mismatch...
You got to fix that before you can proceed.
Follow my instructions:
Download this to begin with while you READ.
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
Here comes the trick: I have found a special rom, which is part of a 2-part update.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, we need to flash the stock rom and you should almost be there...
Post the progress and we will take it from there.
Hope that you will succeed... :0)
Click to expand...
Click to collapse
For information, my version is 2.16.181.1
Thank you !
7ictor said:
you should probably use this tool next time: forum.xda-developers.com/showthread.php?t=794450
Click to expand...
Click to collapse
Thank !
My phone is the S-ON should not apply the above method
anhvaem_n2s said:
thank you very much, I will try and report back
what is "we need to flash the stock rom and you should almost be there..." ?
Can you give me a rom link fit?
a bit sorry for bad english, I'm a Vietnam
Click to expand...
Click to collapse
Just do the first step and the rest will come... i don't want to overload you with information....
7ictor said:
you should probably use this tool next time: forum.xda-developers.com/showthread.php?t=794450
Click to expand...
Click to collapse
anhvaem_n2s said:
Thank !
My phone is the S-ON should not apply the above method
Click to expand...
Click to collapse
As he states, the tool (which is programmed by me and a newer version is to be found in my signature) is only valid if you have an eng spl or s-off.
The steps i gave is to fix the mismatch which is the primary problem now... all other solutions will be futile until the issue has been dealt with.
As he states, the tool (which is programmed by me and a newer version is to be found in my signature) is only valid if you have an eng spl or s-off.
The steps i gave is to fix the mismatch which is the primary problem now... all other solutions will be futile until the issue has been dealt with.[/QUOTE]
If my machine is the S-ON SHIP I can do approach of you?
sorry i read but not understand much
mumilover said:
You have radio/spl mismatch...
You got to fix that before you can proceed.
Follow my instructions:
Download this to begin with while you READ.
http://rapidshare.com/files/45099641...al_sappimg.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
Here comes the trick: I have found a special rom, which is part of a 2-part update.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, we need to flash the stock rom and you should almost be there...
Post the progress and we will take it from there.
Hope that you will succeed... :0)
Click to expand...
Click to collapse
Success!
Thank you
Now you help me how to root, I tried z4root, flashrec were unsuccessful,
OK... sense you want root, i can determine that you have a working system...
For root and other stuff, read my guide found in my signature :0)
how to change my machine S-On the way S-OFF
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.76.0013 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Oct 21 2009,17:27:03
Again.... do you have a working system?
Do you have a custom recovery?
Okay basically i got a htc magic,and on the first day of getting it,i rooted it and started playing around with the software,then i tried install the 2.2.1 rom but sadly failed,my mobile gets stuck on the vodafone uk splash screen
Heres the info you might need to know about it
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0004
CPLD - 10
RADIO - 2.22.28.25
apr 9 2009,23:30:40
The stuff i can do with it is
volume down+power=HBOOT
home+power which comes up with a triangle and a question mark in the middle
back+power which is fastboot
AND I ALSO CAN ACCESS THE FASTBOOT USB
I have tried installing differant vodafone uk sappimg's and update.zips but none work,i also have a program called HTC Android Phone ROM Update Utility 1.0.1.30 Which near to the end comes with the:
ERROR[131]:CUSTOMER ID ERROR
The ROM Update utility cannot update your Android Phone
Please get the correct ROM update Utility and try again
Can someone help me please ,my phone has been like this for 2 weeks now and its really ennoying
Anybody There
Hello can someone help me please,i have been to 3 differant vodafone stores all saying they cant help,iv been to carphone warehouse and Fones4U also saying there is nothing they can do,iv sent it to htc saying i have no warrenty and the phone stores like stalls are saying they wont be responsible if they accidently mess up my phone,i really need it fixed
Dont worry
Omfg i brought my phone back from the dead,i found the right ruu updater now its working
@Artic: tell me what the file is!
cereal86 said:
@Artic: tell me what the file is!
Click to expand...
Click to collapse
cereal86: do you have the exact same device? What errors are you getting?
i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!
cereal86 said:
i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!
Click to expand...
Click to collapse
Goldcard will only help if your error is related to the CID. If you have a branded phone (Rogers, for example) and you want to flash a ROM that is only meant for a different carrier (Vodafone, for example), the goldcard overrides the CID check and continues the process.
A checksum error could mean that the file has been altered.
Could you tell us exactly what information you see on your phone's FASTBOOT page? Model, HBOOT version, RADIO, S-ON/S-OFF, etc.
Thanks.
Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0
cereal86 said:
Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0
Click to expand...
Click to collapse
Okay, there at two issues to deal with first. You have a perfected SPL, 1.33.0014, and you are S-ON. The perfected SPL means that fastboot is crippled and won't let you do most things, and S-ON means it will only let you flash signed images.
***
*** This is one way to fix things, but I'm sure someone knows a better way. If someone knows a better way, please post ***
***
The first step is to unlock the bootloader. This will at least let you flash a custom recovery.
Go to HTC Dev and make an account. Once you've logged in, click on "Unlock Bootloader", then the "Get Started" button. You should be able to skip the RUU installation step, but, if you must do it, the file you want is at this link: SAPP10000 hboot 1.33.0014G. Follow the steps, send your ID token, receive the Unlock_code.bin, and flash it.
Once all of that is done, the bootloader should be unlocked (but still S-ON). You should now be able to flash a custom recovery using this guide: RA sapphire recovery. Scroll down to where it says "via fastboot". It says that is requires an ENG spl, but the unlocked bootloader should be enough. The file you want is: recovery-RA-sapphire-v1.7.0G.img
If you get into the custom recovery alright, you can try updating to an engineering SPL using a signed zip file. Go to this thread and download "roottools". Open it up and get "hboot_2010_signed.zip". Put it in the root (not in a folder) of an sdcard, put the sdcard into your phone and boot into recovery. Look for an option to install a zip file from your sdcard.
If that doesn't work, try renaming the hboot_2010_signed.zip to SAPPIMG.zip, put it on the sdcard and boot into HBOOT mode (Volume Down + Power). It will scan the sdcard and try to install SAPPIMG.zip.
If all of that goes well, let us know.
1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!
cereal86 said:
1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!
Click to expand...
Click to collapse
But did you actually try to flash a recovery image from fastboot?
Download this image: AmonRA 1.7.0G Recovery image
Put your phone into fastboot USB
Open a Command Prompt, cd to the recovery-RA-blahblah.img location, then type this:
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Let us know if that works.
impossible, when i send a command, i receive a error message "remote: not allow"
cereal86 said:
impossible, when i send a command, i receive a error message "remote: not allow"
Click to expand...
Click to collapse
How about:
fastboot boot recovery-RA-sapphire-v1.7.0G.img
i receive a error message "remote: not allow"
cereal86 said:
i receive a error message "remote: not allow"
Click to expand...
Click to collapse
Hmmm. Are you able to enter HBOOT mode? Turn the phone completely off (or pull the battery), then hold VOLUME DOWN and POWER until it says HBOOT.
Yes, i can enter hboot and fastboot
cereal86 said:
Yes, i can enter hboot and fastboot
Click to expand...
Click to collapse
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.
DasBub said:
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.
Click to expand...
Click to collapse
BTW, if it gives you a "main version is older" error, we can fix that.
as soon i tested all the ways, i'll report to you! BIG THANKS to you! cheers!
Let's catch up: i have an sapphire 32B S-ON G, spl 1.33.0014 unlocked, radio 2.22.19.23
1. when i run RUU i get error "bootloader version"
2. all the things i do with fastboot, receive error "remote: not allow"
2.1 when use fastboot oem rebootRUU and then use fastboot flash nbh rom.nbh, received error "Failed (remote: 43 main version check fail)"
3. using sdcard SAPPIMG.nbh (from RUU):
3.1 Non goldcard: transcend 8GB "Main Version is older!"
3.2 Goldcard: kingston 4GB "Main Version is older!"
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
is there any tool to edit the edit NBH file and "fool" the phone?
I'll need to buy a 2gb kingston sdcard?
can i flash ruu hboot 1.76.0013 and try all the process?