Cant sideload after unlock - Atrix 4G General

I've been searching all day at work today and i cant find a post that can help. I have tired using aRoot to enable it but it didn't work. I am still rooted just no sideloading.
If there is a post on this and I'm just blind my bad.
Adam

http://forum.xda-developers.com/showthread.php?t=1017373
GladEnabler does what you need. aRoot is very old, no longer useful - from when the phone first came out.
Sent from my MB860 using XDA App

I tried that 2 times, no luck, I manually added the apn though, trying to find instrution using root explorer to turn on sideloading

If you are on 2.3.4 you can just go to settings>applications and check unknown sources.

if you dont want to go to 2.3.4 then use this method to get root and sideloading. it is the easiest method http://forum.xda-developers.com/showthread.php?t=1046626

Related

Cant root after Flashing New SBF...

I installed the new 2.2.320 sbf from TBH, just to start fresh. I have now tried 6 different programs to root my phone. None of them are working...Is anyone else having this issue? And if you got it working, what steps did you take to fix it? Thanks in advance
Use z4root. Had The same problem. This is a one click root application.
Yup, same problem here too. I was actually going to ask if anyone has the z4 root app because it disappeared from the market. It was the only thing that worked the first time I flashed the new SBF.
ya, after flashing the new SBF, had to manually install Z4 as it wasnt in the market. Also it seems as if the D2 method wasnt working properly.
Thanks for the help everyone...
Sent from my DROIDX using XDA App
s0n- said:
ya, after flashing the new SBF, had to manually install Z4 as it wasnt in the market. Also it seems as if the D2 method wasnt working properly.
Click to expand...
Click to collapse
I don't know what the reasoning is, but no other root methods seem to work on 2.2.1.
z4root worked fine for me
deadpixell said:
z4root worked fine for me
Click to expand...
Click to collapse
YEs it works. That was the point of this thread. lol
I had to wipe data to get z4 to work. I don't know why but if I downloaded all my apps again and set everything up it wouldn't work.
Put your phone in airplane mode, reboot, run z4root, let it reboot you phone. Once it powers on take it out of airplane mode and you should be rooted.
Sent from my DROIDX using Tapatalk
I tried loading z4root on my phone, but every single time I try to download it it say "content not supported on phone".
Any help is much appreciated.
SleekDX said:
I tried loading z4root on my phone, but every single time I try to download it it say "content not supported on phone".
Any help is much appreciated.
Click to expand...
Click to collapse
I used z4root also make sure debugging is turned on
Sent from my DROIDX using XDA App
Breakthecycle2 said:
I don't know what the reasoning is, but no other root methods seem to work on 2.2.1.
Click to expand...
Click to collapse
Rooting through ADB works... z4root is much easier of course.
The .340 OTA installed on my phone today. Lost root.
I tried the DarkOnion batch file (DoRootWin_2.1.4) several times and could not get it to run to completion.
As mentioned, Z4 (in airplane mode) worked fine.
I tried this...my phone is telling me it cannot down the file because the file type is not suported by my phone. What am I missing? Thank you!!!
I too am having issues with rooting after the ota update. I initally was rooted using the rootmyx2 one click gui from sli3ntki11 and did the update, now nothing will give me root access, I tried z4, rootmyx2 (again), and tried the doroot.bat method through the android sdk install. Kinda at a loss. Any help on this would be greatly appreciated.
Sent from my DROIDX using XDA App
So I believe I figured it out. I have two existing superuser.apk in my system/app folder. This from what I read in some other posts is confusing z4 ( go figure smart enough to root but not to overwrite, lol) but the directory is read only. The other post gave a link to the steps to access it but the page was not found. Can anyone give me the steps to take to gain access to the directly and make it read/write so I can remove those two rogue files and get rooted?
Sent from my DROIDX using XDA App
z4root not supported on my droid X
hi,
i updated my Droid X to the latest version. 2.3.340. and downloaded the z4root through my phone from the link here and i get an error message that the file is not supported on this phone. please help i am new to this and still don't fully understand all of the terms. i tried to download the z4root 1.2 from 4shared.com but the phone hangs and nothing happens. any type of help will be appreciated, thanks.
did you sucessfully install it or did you get the error while trying to install it. you will have to download the apps installer from the market and use it to install the z4root.apk from your sd card.
crxin said:
did you sucessfully install it or did you get the error while trying to install it. you will have to download the apps installer from the market and use it to install the z4root.apk from your sd card.
Click to expand...
Click to collapse
what is the name of the apps installer i need to use the Z4root.

Atrix shows Superuser app but is not rooted

I have an AT&T Atrix on the 1.5.7 firmware. I do have all drivers installed, USB debugging enabled, and am using Windows 7 (dual booted on a macbook 2011).
I believe my problem is that I originally rooted it on the old firmware and then i installed the 1.5.7 OTA update. I now have the Superuser app on my phone but it does not give anything root permission. I've attempted to root again via Superoneclick but it gets hung right after pushing pneuter or gingerbreak to the phone. I have also tried unrooting but that gets hung up as well.
Can anyone give me some things to try or even walk me through something?
Thanks so much!
search the dev forum for gladroot as to why it doesn't work...
and you can try to re-root using gingerbreak, which is also in the dev forum.
basically updating without following the proper steps will not keep your root. and also.
NEVER USE SUPERONECLICK!
spend some time in the dev forums. you'll learn a lot.
Thanks! I'll look into the gladroot issue.
I have tried Gingerbreak but when I run the program with my phone connected, the spinning loading cursor displays for a second then nothing happens. I've ran as administrator but that doesn't do anything different.
It's worth noting, on 1.8.4 Gingerbreak 1.2 worked fine. I know recovery wasn't playing nice unless plugged in. That could also help. Obviously it won't hurt.
notanatheist said:
It's worth noting, on 1.8.4 Gingerbreak 1.2 worked fine. I know recovery wasn't playing nice unless plugged in. That could also help. Obviously it won't hurt.
Click to expand...
Click to collapse
There is no 1.8.4
Meh, 1.8.3 I means. Although I just noticed Greyblur takes it down to 1.5.7
CaelanT said:
There is no 1.8.4
Click to expand...
Click to collapse
Update to 1.83 and use gingerbreak. You'll need an external SD card though. It works great.
Not sure if this is the place to put this, but I'm having a similar problem, even if I got here differently.
I tried superoneclick, and I tried gladroot. In each case, the program seemed to run successfully, did everything I expected from the directions, no error messages. Claimed success at the end of the run. The superuser app is installed, but no apps are listed. When I try to run an app that needs root, like Root Explorer, it just complains that my phone isn't rooted.
I used the directions and downloads here: http://forum.xda-developers.com/showthread.php?t=1016060
Build number was OLYLA_U4_0.37.4
My phone is on Bell, so I used the Bell directions. Anyone else have or overcome this problem?
i am rooted, all root apps work.
my problem is android commander says am not rooted (windows xp)
and adb dont work
any solution?
Use gingerbreak and report back
Sent from my GT-I9100 using XDA Premium App
So I tried doing the webtop hack anyway, and when I got to this step:
Code:
adb shell
su
my phone prompted me to allow root access. Finished the process and it's working fine. Ran Root Explorer, it asked for permission, and now it works fine, too.
Maybe doing something as explicit as 'su' in adp shell was the kick in the pants it needed. Either way it's working now...
I thought maybe I'd added superuser to auto-end list, for whatever reason, but when I checked it wasn't there...
tjjensen23 said:
Use gingerbreak and report back
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
my sig says i used gingerbreak m8

[Q] needs alittle help with root

So I picked up an ATT Atrix 4g the other day and I love it! Last cell's were a BlackBerry and before that an iPhone. Android OS blows those away. So I am the tinkering type and want to root and use custom ROM (greyblur). Currently I am upto date (version 4.1.83). From what I read here, I need to flash back to 1.26 via this guide (http://forum.xda-developers.com/showthread.php?t=991072). Installed RSDlite, passworded file, removed sim card, memory card, booted with RSD support, opened RSDlite, selected file (extracted to c:\GladRoot...also tried directly into c, Start. Created the image, it rebooted my atrix, and then the Status threw this message:
"Failed flashing process. failed flashing process. Phone did not re-enumerate after RAM-downloader was sent. (0x703E); phone disconnected.
Progress: Exectuded 100%
Result: FAIL
So was am I missing here? I am on version 4.1.83, but there is reference to 1.2.6 and 1.5.2...I assume these numbers are the firmware revision/version? So as I take it I need to "downgrade" from 4.1.83 to 1.26....? I am kinda lost here. Any help in the right direction would be great.
Look here to root your Atrix http://forum.xda-developers.com/showthread.php?t=1016060
1) Where can I verify that I am on 1.2.6 on my Atrix?
2) I ran the gladroot.bat as admin (win7 user) and got:
waiting for root access to kick in...
psneuter failed to execute properly
I extracted gladroot to c:\gladroot
Any thoughts?
Did you try to use Gingerbreak?
This is really easy, i got no problem with that...
Also, I think you need to install motorola usb windows driver to use rsdlite...
No I didnt try gingerbreak.
I do have the Moto USB drivers installed.
Settings>about phone>build number
Will show if you are on 4.1.26
When it comes to the psneuter fail, I had an issue with that too I believe. Try battery pull/restart. Make sure phone is fully charged. Make sure to right click and run it as admin. Other then that, I don't know what else to suggest.
Edit: if you have any system apps frozen with titanium backup, try unfreezing them and also make sure you have the home motoblur launcher unfrozen if you are flashing an sbf.
Sent from my MB860 using XDA App
lhurtado said:
Did you try to use Gingerbreak?
This is really easy, i got no problem with that...
Also, I think you need to install motorola usb windows driver to use rsdlite...
Click to expand...
Click to collapse
Please tell me a way to unroot after rooting with ginger break?
Sent from my MB860 using XDA App
Jazor28 said:
Please tell me a way to unroot after rooting with ginger break?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Flash sbf.
Sent from WinBorg 4G via XDA premium app
why do not root with gingerbreak?
briefmobile[dot]com/motorola-atrix-4g-root - this is even a link i found on xda-dev
i want my device rooted too, but noneed to flash back, flash up, flash back blabla?
gingerbreak sounds much more easier for me - why you guys recommend gladroot? whats the diffrence? is gingerbreak that bad?
Backing out gingerbreak - "flash sbf"?
CaelanT said:
Flash sbf.
Sent from WinBorg 4G via XDA premium app
Click to expand...
Click to collapse
So what does this really mean? I used gingerbreak after superoneclick hung on psneuter. Phone rebooted after gingerbreak, but superuser app was nowhwere to be seen. I got cold feet and did a factory reset thinking this was all I needed to undo what gingerbreak (and superioneclick?) did. EasyTether now hangs when disabling to I think something is broken.
using gingerbreak to root is real simple I can't post a URL, but briefmobile has instructions on how to do so using gingerbreak. briefmobile.com/motorola-atrix-4g-root
Gingerbreak and Gladroot are equally good. Some don't like Gingerbreak as it can wipe internal sdcard.
Beamed in from WinBorg 4G via XDA Premium app

Mobile Hotspot custom APN no longer working on gingerbread

My mobile hotspot no longer works after I updated to gingerbread. I had it set up with the custom APN method. Has anyone found a way around this?
http://forum.xda-developers.com/showthread.php?t=1160452
Bottle Guy said:
My mobile hotspot no longer works after I updated to gingerbread. I had it set up with the custom APN method. Has anyone found a way around this?
Click to expand...
Click to collapse
Is there a way to do it without rooting? It was so simple to create that APN, and I didn't have to be very technical.
manthei2 said:
Is there a way to do it without rooting? It was so simple to create that APN, and I didn't have to be very technical.
Click to expand...
Click to collapse
No
This should help you root though:
http://briefmobile.com/motorola-atrix-4g-root
Will this wipe my device?
Sent from my MB860 using XDA App
Bottle Guy said:
Will this wipe my device?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Rooting using preinstall.img does not wipe the phone.
Sent from my MB860
Well f**k me sideways, this presents a problem since I was using my atrix for home internet. So there's positively no way to use the nice and simple modified APN method on the OTA update?
Not that I know of dude but I just tried that root method and it works. It's pretty easy. I have no experience with this sort of thing and figured it out. If you have problems with the last step installing the superuserapk just download the superuser app in the market. Thanks for the help guys.
hmmm....
Does anyone know what the consequences of rooting are?
I.E.....Does it prevent the ability to install OTA Updates?
Or is any other functionality lost, prevented, etc...
I realize this is quite noobish, but having come from Windows 6.5xxx (energy fan), and know not enough regarding android. Furthermore, previously who cared about updates OTA from AT&T, they were non-existent......but now?
Thanks!
P.S. I have no desire to modify my rom or flash another, I just want my bloody hotspot back on my unlimited plan.
How do you know if you were successful at rooting? I tried the steps and I thought they worked but when I went to uninstall Vlingo (which I thought I'd be able to after I rooted) it didn't give me the option to uninstall. I also tried to install wi-fi tether from the Market and I didn't have the option to download. I'm assuming I wasn't successfult at rooting, but before I do the steps again I want to make sure.
Download root checker and superuser from the market
manthei2 said:
How do you know if you were successful at rooting? I tried the steps and I thought they worked but when I went to uninstall Vlingo (which I thought I'd be able to after I rooted) it didn't give me the option to uninstall. I also tried to install wi-fi tether from the Market and I didn't have the option to download. I'm assuming I wasn't successfult at rooting, but before I do the steps again I want to make sure.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
manthei2 said:
How do you know if you were successful at rooting? I tried the steps and I thought they worked but when I went to uninstall Vlingo (which I thought I'd be able to after I rooted) it didn't give me the option to uninstall. I also tried to install wi-fi tether from the Market and I didn't have the option to download. I'm assuming I wasn't successfult at rooting, but before I do the steps again I want to make sure.
Click to expand...
Click to collapse
download Terminal Emulator from the market, open it, type "su" and hit enter. if the $ changes to a #, you have root.
deleted----

Rooting question

Im trying to root my D2. Followed the guide on TheUnlockr. Got to one of the final steps (the one where it tells you to download ConnectBot and type cd /data/local/tmp, enter, ./rageagainstthecage-arm5.bin).
That works for me. Then it says something like "forked xxxx children". Then I type exit, and it freezes til it force closes. I can't reopen the app after. I have to uninstall/reinstall and usually pull the battery.
I've tried different terminal emulators as well; they all do the same thing.
Has anyone else rooted using this method? am I doing something wrong? Btw, I have a Droid 2 Global (if it matters) running 2.3
Sent from my DROID2 GLOBAL using XDA App
Try this one instead:
http://www.psouza4.com/droid3/
That, or search for Z4Root, it will root a Froyo Droid 2 or D2G, but if you already ran the OTA GB update it will not, you'd need the method above.
Thanks, I'll check it out in a little bit. I did use the Z4 method prior to the recent OTA update. It said it worked, but I couldn't flash a custom rom. Also, when I used a Root Checker from the Market, it said I wasn't rooted either. This is all before I updated.
Sent from my DROID2 GLOBAL using XDA App
Edit: That one-click method didn't work either. It went through, rebooted my phone three times, and said it should be rooted. I used that Root Check app, and it said I didn't have root access. Also went to use Barnacle Wi-Fi Tethering, and that said I didn't have root either, even though I have SU on my phone.
Driveshaft said:
Thanks, I'll check it out in a little bit. I did use the Z4 method prior to the recent OTA update. It said it worked, but I couldn't flash a custom rom. Also, when I used a Root Checker from the Market, it said I wasn't rooted either. This is all before I updated.
Sent from my DROID2 GLOBAL using XDA App
Edit: That one-click method didn't work either. It went through, rebooted my phone three times, and said it should be rooted. I used that Root Check app, and it said I didn't have root access. Also went to use Barnacle Wi-Fi Tethering, and that said I didn't have root either, even though I have SU on my phone.
Click to expand...
Click to collapse
I would SBF back to Froyo and run the OTA again, that will guarantee the root is removed. Then use the link I provided and you should have SU. Running Z4 might have corrupted some files since it's not compatible with OTA GB.
How do u go back to froyo
Sent from my PC36100 using xda premium
dvtmg704 said:
How do u go back to froyo
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17244062&postcount=2

Categories

Resources