Im trying to root my D2. Followed the guide on TheUnlockr. Got to one of the final steps (the one where it tells you to download ConnectBot and type cd /data/local/tmp, enter, ./rageagainstthecage-arm5.bin).
That works for me. Then it says something like "forked xxxx children". Then I type exit, and it freezes til it force closes. I can't reopen the app after. I have to uninstall/reinstall and usually pull the battery.
I've tried different terminal emulators as well; they all do the same thing.
Has anyone else rooted using this method? am I doing something wrong? Btw, I have a Droid 2 Global (if it matters) running 2.3
Sent from my DROID2 GLOBAL using XDA App
Try this one instead:
http://www.psouza4.com/droid3/
That, or search for Z4Root, it will root a Froyo Droid 2 or D2G, but if you already ran the OTA GB update it will not, you'd need the method above.
Thanks, I'll check it out in a little bit. I did use the Z4 method prior to the recent OTA update. It said it worked, but I couldn't flash a custom rom. Also, when I used a Root Checker from the Market, it said I wasn't rooted either. This is all before I updated.
Sent from my DROID2 GLOBAL using XDA App
Edit: That one-click method didn't work either. It went through, rebooted my phone three times, and said it should be rooted. I used that Root Check app, and it said I didn't have root access. Also went to use Barnacle Wi-Fi Tethering, and that said I didn't have root either, even though I have SU on my phone.
Driveshaft said:
Thanks, I'll check it out in a little bit. I did use the Z4 method prior to the recent OTA update. It said it worked, but I couldn't flash a custom rom. Also, when I used a Root Checker from the Market, it said I wasn't rooted either. This is all before I updated.
Sent from my DROID2 GLOBAL using XDA App
Edit: That one-click method didn't work either. It went through, rebooted my phone three times, and said it should be rooted. I used that Root Check app, and it said I didn't have root access. Also went to use Barnacle Wi-Fi Tethering, and that said I didn't have root either, even though I have SU on my phone.
Click to expand...
Click to collapse
I would SBF back to Froyo and run the OTA again, that will guarantee the root is removed. Then use the link I provided and you should have SU. Running Z4 might have corrupted some files since it's not compatible with OTA GB.
How do u go back to froyo
Sent from my PC36100 using xda premium
dvtmg704 said:
How do u go back to froyo
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17244062&postcount=2
Related
Edit : just checked. My phone is running the newest updated but im gonna try to unroot and reroot one more time even though I already tried and it could not unroot.
So I went to install the new update via stock recovery and it seemed to work. I go check system settings and its still showing 2.3.2 and not the newest one. I go to try and root and it says everything works and my phone is rooted. Thing is there is no super user app that appeared on my last droid 2. What's the issue?
Sent from my DROID2 using XDA App
Try it again and use the 1 click root for 2.3.20 from here http://www.mydroidworld.com/forums/droid-2-discussion/5321-2-3-20-1-click-root.html
komputerfreek said:
Edit : just checked. My phone is running the newest updated but im gonna try to unroot and reroot one more time even though I already tried and it could not unroot.
So I went to install the new update via stock recovery and it seemed to work. I go check system settings and its still showing 2.3.2 and not the newest one. I go to try and root and it says everything works and my phone is rooted. Thing is there is no super user app that appeared on my last droid 2. What's the issue?
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
It might be that you just lost the app and just need to get it off the Market.
JDunc said:
It might be that you just lost the app and just need to get it off the Market.
Click to expand...
Click to collapse
Yeah, I saw it was rooted and just went to market and got Superuser app and installed, I have root. I don't know why it did not show the superuser app even thought it said the apk was transfered.
Mine did the same. After I rooted using the one click method, it said it was a sucess. Tried to use Root Explorer, and it said failed getting superuser permission. Checke my SD card, and there was no Superuser.apk there. I copied it to the SD card from the one click directory, and it was sucessful. When trying to use Titanium Backup, had trouble with Busybox. Titanium downloaded a new Busybox, and all is now well.
Sent from my DROID2 using XDA App
(Droid X 2 weeks old) I’m trying the temporary root option.
It reads I’m rooted until my next reboot, but I’m trying to use the wifi tether and it reads “Sorry, but your kernel does not have all necessary features for running the application.”
Busybox says "Not Rooted"
What must I do?
From what I understand, the temporary root keeps you rooted only unless you
reboot. So each time you reboot the phone, you have to temporary root in z4
over again. Otherwise, just do the permanent root.
you should use z4root 1.1.0 not 1.3.0 and permanent root. Worked for me.
Sent from my DROIDX using XDA App
You also need to install the super user app from the market.
The features its talking about is Access-Control, which has never really worked to begin with. The app will still do what its supposed to just you can't use that one feature.
Prob just didn't get the pop-up to allow su privileges. Usu. just exit & restart the app & allow when it shows...
Sent from my DROIDX using XDA App
& z4root 1.3.0 works & installs su when it roots - u might want to get a more updated busybox from mkt tho.
As a sidenote, when I first used it I had to temp root first, then perm root after. Other times it just took a min or two to achieve perm root.
I have an AT&T Atrix on the 1.5.7 firmware. I do have all drivers installed, USB debugging enabled, and am using Windows 7 (dual booted on a macbook 2011).
I believe my problem is that I originally rooted it on the old firmware and then i installed the 1.5.7 OTA update. I now have the Superuser app on my phone but it does not give anything root permission. I've attempted to root again via Superoneclick but it gets hung right after pushing pneuter or gingerbreak to the phone. I have also tried unrooting but that gets hung up as well.
Can anyone give me some things to try or even walk me through something?
Thanks so much!
search the dev forum for gladroot as to why it doesn't work...
and you can try to re-root using gingerbreak, which is also in the dev forum.
basically updating without following the proper steps will not keep your root. and also.
NEVER USE SUPERONECLICK!
spend some time in the dev forums. you'll learn a lot.
Thanks! I'll look into the gladroot issue.
I have tried Gingerbreak but when I run the program with my phone connected, the spinning loading cursor displays for a second then nothing happens. I've ran as administrator but that doesn't do anything different.
It's worth noting, on 1.8.4 Gingerbreak 1.2 worked fine. I know recovery wasn't playing nice unless plugged in. That could also help. Obviously it won't hurt.
notanatheist said:
It's worth noting, on 1.8.4 Gingerbreak 1.2 worked fine. I know recovery wasn't playing nice unless plugged in. That could also help. Obviously it won't hurt.
Click to expand...
Click to collapse
There is no 1.8.4
Meh, 1.8.3 I means. Although I just noticed Greyblur takes it down to 1.5.7
CaelanT said:
There is no 1.8.4
Click to expand...
Click to collapse
Update to 1.83 and use gingerbreak. You'll need an external SD card though. It works great.
Not sure if this is the place to put this, but I'm having a similar problem, even if I got here differently.
I tried superoneclick, and I tried gladroot. In each case, the program seemed to run successfully, did everything I expected from the directions, no error messages. Claimed success at the end of the run. The superuser app is installed, but no apps are listed. When I try to run an app that needs root, like Root Explorer, it just complains that my phone isn't rooted.
I used the directions and downloads here: http://forum.xda-developers.com/showthread.php?t=1016060
Build number was OLYLA_U4_0.37.4
My phone is on Bell, so I used the Bell directions. Anyone else have or overcome this problem?
i am rooted, all root apps work.
my problem is android commander says am not rooted (windows xp)
and adb dont work
any solution?
Use gingerbreak and report back
Sent from my GT-I9100 using XDA Premium App
So I tried doing the webtop hack anyway, and when I got to this step:
Code:
adb shell
su
my phone prompted me to allow root access. Finished the process and it's working fine. Ran Root Explorer, it asked for permission, and now it works fine, too.
Maybe doing something as explicit as 'su' in adp shell was the kick in the pants it needed. Either way it's working now...
I thought maybe I'd added superuser to auto-end list, for whatever reason, but when I checked it wasn't there...
tjjensen23 said:
Use gingerbreak and report back
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
my sig says i used gingerbreak m8
So I picked up an ATT Atrix 4g the other day and I love it! Last cell's were a BlackBerry and before that an iPhone. Android OS blows those away. So I am the tinkering type and want to root and use custom ROM (greyblur). Currently I am upto date (version 4.1.83). From what I read here, I need to flash back to 1.26 via this guide (http://forum.xda-developers.com/showthread.php?t=991072). Installed RSDlite, passworded file, removed sim card, memory card, booted with RSD support, opened RSDlite, selected file (extracted to c:\GladRoot...also tried directly into c, Start. Created the image, it rebooted my atrix, and then the Status threw this message:
"Failed flashing process. failed flashing process. Phone did not re-enumerate after RAM-downloader was sent. (0x703E); phone disconnected.
Progress: Exectuded 100%
Result: FAIL
So was am I missing here? I am on version 4.1.83, but there is reference to 1.2.6 and 1.5.2...I assume these numbers are the firmware revision/version? So as I take it I need to "downgrade" from 4.1.83 to 1.26....? I am kinda lost here. Any help in the right direction would be great.
Look here to root your Atrix http://forum.xda-developers.com/showthread.php?t=1016060
1) Where can I verify that I am on 1.2.6 on my Atrix?
2) I ran the gladroot.bat as admin (win7 user) and got:
waiting for root access to kick in...
psneuter failed to execute properly
I extracted gladroot to c:\gladroot
Any thoughts?
Did you try to use Gingerbreak?
This is really easy, i got no problem with that...
Also, I think you need to install motorola usb windows driver to use rsdlite...
No I didnt try gingerbreak.
I do have the Moto USB drivers installed.
Settings>about phone>build number
Will show if you are on 4.1.26
When it comes to the psneuter fail, I had an issue with that too I believe. Try battery pull/restart. Make sure phone is fully charged. Make sure to right click and run it as admin. Other then that, I don't know what else to suggest.
Edit: if you have any system apps frozen with titanium backup, try unfreezing them and also make sure you have the home motoblur launcher unfrozen if you are flashing an sbf.
Sent from my MB860 using XDA App
lhurtado said:
Did you try to use Gingerbreak?
This is really easy, i got no problem with that...
Also, I think you need to install motorola usb windows driver to use rsdlite...
Click to expand...
Click to collapse
Please tell me a way to unroot after rooting with ginger break?
Sent from my MB860 using XDA App
Jazor28 said:
Please tell me a way to unroot after rooting with ginger break?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Flash sbf.
Sent from WinBorg 4G via XDA premium app
why do not root with gingerbreak?
briefmobile[dot]com/motorola-atrix-4g-root - this is even a link i found on xda-dev
i want my device rooted too, but noneed to flash back, flash up, flash back blabla?
gingerbreak sounds much more easier for me - why you guys recommend gladroot? whats the diffrence? is gingerbreak that bad?
Backing out gingerbreak - "flash sbf"?
CaelanT said:
Flash sbf.
Sent from WinBorg 4G via XDA premium app
Click to expand...
Click to collapse
So what does this really mean? I used gingerbreak after superoneclick hung on psneuter. Phone rebooted after gingerbreak, but superuser app was nowhwere to be seen. I got cold feet and did a factory reset thinking this was all I needed to undo what gingerbreak (and superioneclick?) did. EasyTether now hangs when disabling to I think something is broken.
using gingerbreak to root is real simple I can't post a URL, but briefmobile has instructions on how to do so using gingerbreak. briefmobile.com/motorola-atrix-4g-root
Gingerbreak and Gladroot are equally good. Some don't like Gingerbreak as it can wipe internal sdcard.
Beamed in from WinBorg 4G via XDA Premium app
So i just odin'd from miui to stock, went to root, everything went fine. except that it kinda didnt. now, whenever i try to use an app that requires root (rom manager, root explorer, etc) it crashes. Superuser does it too.
is there something i'm missing? i've odind many many times, with no problems whatsoever. this time tho, nothing root related works. i've tried re-odining, rerooting, with different files that i've had on my computer for ages, with new ones just downloaded, with AIO. all to no avail.
any ideas?
I've noticed that Superuser has had some updates lately that could be the issue.
Sent from my SGH-T959 using XDA App
did you reboot the phone right after rooting?
Could you try using my noob guide and my update.zip files.... I prefer B as it is the fastest method. The ROM will give you root access.
Or get old school oneclicklagfix 2.3, I use it every time now. Root zip built in.
Sent from my SGH-T959 using XDA App
I recommend going back and using the noob guide option recommended above. It has also worked perfectly for me.
Sent from my T959 using XDA App