Database Users

[Q] Problems with flashing new firmware on Samsung I8700 Omnia 7

I can't seem to get my Omnia 7 to communicate with Win7 via USB cable in Download Mode. I use Win7 Pro x64.
I've installed:
I8700_Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0
I run:
I8700_WP7_Downloader_Ver_7.03_For_Retail_Device_(Product_Force_Select)_
I've even tried uninstalling all Samsung USB drivers, reinstalling them and restarting my system, but I still can't get it to work.
When I start the WP7 Downloader, it says "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". What is that all about? There are no MD5 files in the firmware package that I've downloaded (I8700XXJJ4). If I click "Close", the application dialog opens, but I get no connection to the phone via a COM port.
What am I doing wrong?
[UPDATE!]
I got my Omnia 7 to connect by starting up the WP7 Downloader BEFORE I rebooted the phone into Download Mode. However, I'm still getting the "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". Please help!

Please post in the proper forums. If you have an issue related specifically to that device, please post it there. This is for WP7 development as a whole, and device specific problems go in their proper forums and subsections.
~~Tito~~

To flash, you have to start WP7 Downloader before you plug your Omnia 7 in download mode. And then you'll see a new COM port. (h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21328])
Be carefull : the XXJJ4 firmware seems not to work. It's not a valid binary retail file whereas the DTMJJ6 works fine. I'll flash my Omnia 7 one week ago. (]h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21326]) The DTMJJ6 is a T-Online branded ROM.
My Omnia 7 is a French Orange branded device and with the DTMJJ6, some features don't work anymore as data transfert without WiFi. It's the reason why I advise you to wait an other ROM. In my case I'm waiting for a dump of the original ROM or a new I8700XX.. files but still nothing...

firmware
where did you get the firmware or update, is it possible to get firmwares for other phones like the focus,

Please,
i have I8700XXJJ6 WITH CSC TMUJJ6, the phone is locked to T-mobile UK, and i'm downloading DTMJJ6, will this rom work, if yes, will the phone be unlocked ?
Thanks,
B.R.

It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?

Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
The new ROM feels snappier due to the better 3g/wireless speeds and gets rid of the horrible tmobile branded IE and searches.
Over all definitely worth trying.

So it's the JK1 which is needed, not the JJ6.

Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
to get it unlocked friend ! how can i do it ?

I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).

DanMaxis said:
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
Click to expand...
Click to collapse
DanMaxis,
There might be a way without a jig. In principal you could try updating right through to nodo which would give you the new Bootloader that allows flashing.
What you have to do is "unbrand" your phone with the Samsung unbrand xap which can be found in the wp7 developer forum. (First or second page)
Of course you need to apply the chevron unlock for it.
After having done that you will be able to receive the pre Nodo update and then the Nodo update with the "cut connection after 4 seconds" trick.
After these updates are installed your bootloader should be the new one. This will in theory enable you to reflash a different rom onto it.
In theory... because I havent tried yet.
I encounter an error on my Omnia 7 that it timed out after the first update. This is a common issue among Samsung users (as has been reported all across the web) and the only way to fix it is to hard reset the phone.

Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!

I don't think the MD5 error relates to phone communication - I got this when I tried to open the update file from within a compressed folder - you have to extract the file that is downloaded to another folder then open it through the update tool. You'll also get an MD5 error if you enter the wrong password for the file.
The Control at the bottom left of the update tool window tells you if the phone is connected or not and is separate to actually opening the update files (turns green and says which Comm port the phone is on if the phone is connected properly).
Hope this helps.

do85 said:
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
Click to expand...
Click to collapse
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.

DanMaxis said:
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
Click to expand...
Click to collapse
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?

do85 said:
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
Click to expand...
Click to collapse
Yes, I think it is the issue described here....
www[dot]winrumors.com/microsoft-reportedly-warns-against-using-chervonwp7-nodo-updater/?utm_source=twitterfeed&utm_medium=twitter&utm_campaign=Feed%3A+WinRumors+%28WinRumors%29&utm_content=Twitter

I've ordered this JIG http:\\cgi.ebay.com/Samsung-Galaxy-S-Omnia-7-Fix-Download-Mode-USB-jig-/130475201436
Let's see what happens.

[Q] Omnia 7 bricked . Help From China!Save my life..my friends..

Hi my friends,you are my only hope.
i have a 16GB T-Mobile Omnia7,Non Retail Version and current build is 7661 non-jailbreak version.so i wanna turn it back to original build(7004)，unlock it.and taste sweet Mango ...
With the help of my friends,i flashed my omnia7 through "I8700_WP7_Downloader_Ver_7.03_For_Retail_Device__Product_Force_Select"..But the sudden error crazyed me...
with the log window saying "ERROR[Channel 0] Write MIBIB Data Fail!!!"and then "[Channel 0] FLASH LOCK".. Port region displayed "MIBIB WRITE FLASH Failed" .i disconnect the data line.then i closed the WP7 downloader,trying again，run downloader once again,but a dialog pop up, appeared on the screen .dialog title,"Partition Information Exeption"and details,"Partition Information is not equal,Do you Erase Nand and download ALL?" then the line com port disconnected....Failed...
She likes a brick...~~~~(>_<)~~~~
Lacking good fortune...
Current Condition，i can enter download mode with a 挖煤器(called a coal digger in English?),but cant access to the "recover mode",cant go further than the boot logo.i'm stuck..
How can i flash my Omnia 7 then? i raped the searching button and WPXAP.COM and Google...,so frustrated..
i think partition table is missing.i want to rebuild the table up.but i dont know how to start ..but but but but why Write MIBIB Data Failed...frustrated....
Anyone had the same problem?...
Flash other roms someone said,but the results are the same.
I tried to reinstall the USB drivers,but nothing more that i can think of can help...no responding..
and a skilled person said to me:WP7 downloader changed,version 7.03 instead of version 7.21 .......i still havnt try it.
PLZ help me ...my foreign friends...my bricked Omnia 7 ..plz save HER .i trust you ...%>_<% sorry for my poor english...

If it fails when flashing the new NAND layout, you are screwed and if you can't make sad eyes and get a warranty replacement, you're gonna have to use JTAG to recover the NAND. The JTAG pins are rather easy to access, right below the battery sticker. Then you need some piece of hardware (RIFF Box, that Samsung JTAG tool, ...) and some software (comes with the JTAG hardware) and flash the NAND directly.

OndraSter said:
If it fails when flashing the new NAND layout, you are screwed and if you can't make sad eyes and get a warranty replacement, you're gonna have to use JTAG to recover the NAND. The JTAG pins are rather easy to access, right below the battery sticker. Then you need some piece of hardware (RIFF Box, that Samsung JTAG tool, ...) and some software (comes with the JTAG hardware) and flash the NAND directly.
Click to expand...
Click to collapse
Thanks for replying！
In fact i help my friend to post this thread.He is full of gratitude for your help！

did you repair phone? i have similar problem http://forum.xda-developers.com/showthread.php?p=17496007#post17496007

[Q] Omnia7 flash- MBIB failed

Hello Guys, I'd like to talk to you about my Omnia7.
I just got it from one guy on a very famous auction website and yeah... it is a brick... lucky me
Since there ain't much chance of getting my money back I am now trying to get it to work by flashing the firmware.
State of the mobile is as follows. If you start it, you can see the omnia 7 boot logo and nothing else happens. The Boot into download mode works but idk if that helps since when I am trying to flash the little phone it gets the following output:
[...]
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
ERROR[Channel 0] Write MIBIB Data Fail!!!
[Channel 0] FLASH LOCK
[...]
So does anyone know what to do in this case? Is it completely bricked or is there some workaround?
FYI: I tried this on one laptop and one pc on several different usb ports and with different firmwares: (I8700_XEN_I8700XENJK1,
I8700XXKH5 )
Could it be the wrong firmware? It's most likely an Austrian/German phone from 3mobile maybe!?
Does anyone know what MIBIB means? Or what it represents? I searched the web already for several hours... thanks a lot in advance!
Cheers,
the dlihc

Now I've tried another image and it went past the MIBIB but then a dspl1 error appeared. The display showed a one centimeter long green bar at the left bottom of the display and I (as stupid as I might be) unplugged it and took the battery out since it didn't respond anymore on the IO button. So now the phone won't boot at all. Any suggestions? Would the resistor trick help?
Thanks in advance,
dlihc

You can try the resistor method, but I doubt it.
Unless you can RMA the phone, you can go probably with just only JTAG left. If you donate the phone to community, we can work on HardSPL

Please help! accidentally sent 1.4 HW oem cab to 1.3 HW Focus

I was using Cab sender to send mango updates and there were also oem updates.
I did not have an idea and downloaded both. Used Cab sender and sent both now Focus is stuck on Samsung logo continuously rebooting. Tried the retail 1.3 AT&T Rom but no result.
Any help would be appreciated!

LOL... yeah I just did the same stupid thing. And I know better too...
so any body know how to unbrick from the Samsung boot loop? Just before it reboots I can see the Format screen flash in a slit second, but can't keep it there. I can get the phone to stay at in Download Mode though, but it does nothing.

I don't know if it would make any difference, but have you tried to flash magldr and a custom rom? Maybe that would break the cycle? Or, use the WP Support Tool? Not sure about any of these, just thinkng out loud what I would try...

I've tried every ROM I can get my hands on and nothing. The only one that seems to do anything other than say that its the wrong device, is the 1.4 ROM, and that reports a partiton issue, asks to redo it and download all, then fails with an app crash.
I cant get mgldr or WP Update Tool to work because the only ,ode I can get the phone into is Download Mode.
Any other ideas?

tenchi71 said:
I've tried every ROM I can get my hands on and nothing. The only one that seems to do anything other than say that its the wrong device, is the 1.4 ROM, and that reports a partiton issue, asks to redo it and download all, then fails with an app crash.
I cant get mgldr or WP Update Tool to work because the only ,ode I can get the phone into is Download Mode.
Any other ideas?
Click to expand...
Click to collapse
same here
download mode is the only thing I can get into

Maybe find the 7004 Rom, download that, and start over. I got my 1.3 stuck in the download mode, and IIRC, that's how I fixed it.

rbrsddn said:
Maybe find the 7004 Rom, download that, and start over. I got my 1.3 stuck in the download mode, and IIRC, that's how I fixed it.
Click to expand...
Click to collapse
I was going to say, Download Mode is exactly where you want to be... Be sure you have the Samsung Drivers installed, then flash a ROM.
I'm still not sure this will work, but again, it's what I would try. I'm half tempted to send the 1.4 to my phone and brick it, then bring it back, but if it's not doable, I'd hate to be be bricked with no return.
tenchi71 said:
I've tried every ROM I can get my hands on and nothing. The only one that seems to do anything other than say that its the wrong device, is the 1.4 ROM, and that reports a partiton issue, asks to redo it and download all, then fails with an app crash.
I cant get mgldr or WP Update Tool to work because the only ,ode I can get the phone into is Download Mode.
Any other ideas?
Click to expand...
Click to collapse
When in Download mode, you are unable to use WP Support Tool? Or, mgldr? Maybe check again that you have the drivers installed.

I'm finding it disturbingly fascinating that this has happened. On most other devices I've owned and tinkered with, if I can get to some kind of boot or access the basic i/o, I could recover. This is the first one that's really giving me fits... Shame the WP Update used in the cab sender doesn't have a check in place to avoid installing the incorrect version. Or that the cabs could be used to extrac a CSC bin file usable with WP Downloader. Thank you Samsung and/or Microsoft for making it easy for us....
Now on to where I'm at in this endeavor:
SuperSport said:
I was going to say, Download Mode is exactly where you want to be... Be sure you have the Samsung Drivers installed, then flash a ROM.
I'm still not sure this will work, but again, it's what I would try. I'm half tempted to send the 1.4 to my phone and brick it, then bring it back, but if it's not doable, I'd hate to be be bricked with no return.
Click to expand...
Click to collapse
Yeah... Ive tried every single combo of firmware/WP7 Downloader. When trying to push a 1.3 Firmware, I get "This Device is NOT a retail device. Downloader will NOT do anything." In the log I see:
[Channel 0] Confirm Model Name
[Channel 0] Locked
The process then fails. The phone then starts rebooting over and over again until I set it back to DL Mode. I cannot get it into Format Mode.
This happens with all ATT and Euro ROM I've tried, as well with an engineering ROM I picked up along the way. Doesn't matter in which version of WP Downloader I tried (.03, .05 & .21)
When using a 1.4 based firmware (4k) I actually get something different: "Partition information is not equal. Do you erase Nand and Download ALL?". I select "OK" and the following comes up in the log:
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Please select All image and Try again
[Channel 0] FLASH LOCK
Like before, this fails, and the phone starts rebooting over and over again.
SuperSport said:
When in Download mode, you are unable to use WP Support Tool? Or, mgldr? Maybe check again that you have the drivers installed.
Click to expand...
Click to collapse
Since the only mode I can get into is "Download Mode" and not Zune Update Mode, the WP Support Tool does not see my phone.
mgldr sees my phone, I'm prompted to select either Focus or Omnia attempts to install, but fails as well:
Selecting the Focus picture:
[Error Description]:
Device detection failed
[Info]: USBWorkDMLI_SAM.cpp (327)
[Error Description]:
Check device failed 3
[Info]: USBWorkDMLI_SAM.cpp (259)
Selecting the Omnia picture:
[Error Description]:
Device model unknown, can't continue.
[Info]: USBWorkDMLI_SAM.cpp (314)
[Error Description]:
Impossible! Omnia 7 can't be 4K! You had choosed wrong device
[Info]: USBWorkDMLI_SAM.cpp (149)
So mgldr definitely sees my phone as a 4K (1.4) device.
Anyone have any other ideas? Unless someone can think of anything else, my last resort might be to buy a usb jig, burn some incense and dance around the room before connecting the jig and giving it a try.

Got a tip on the Cab Sender to try WP7 Downloader v7.41. didn't work. Looks like its time to buy a USB jig...
From my other post....
Thanks for the heads up on .41. I found a copy and gave it shot. Got further along... But just as it unlocks and starts to rewrite the partition table, the app crashes. Nothing happens on the phone.
There's only one version of magldr for Samsung Focus... Unless there's another one I didn't see in the Rainbow Loader thread.

Try flash stock rom using v7.21 software

vt2912 said:
Try flash stock rom using v7.21 software
Click to expand...
Click to collapse
Been there done that, didn't work.
With the .41 version, I was actually able to get a little further, but only AFTER I also installed the "Windows Mobile Device Center" and the "Windows Mobile Device Center Driver Update" package for x64.
With these new drivers installed, the .41 version was the only Updater that would actually see the device properly. I started a rewrite of the bootloader... and it hung halfway through. Big fat red "FAIL". I let it sit for a couple of hours, but nothing continued along.
I had to pull the battery to get the phone to turn off. That was the last time I saw the phone turned on. It's real brick now, will not power on.
Think a jig will get it out of its slumber?
Wonder how much I'll get if I sold it for parts...
Might be time to get me that Galaxy Note i keep drooling over...

Having a similar issue. Samsung Focus just flashes the logo.
Whenever I try and use WP7 Downloader Ver 7.41 and select the 1.3 files the WP7 Downloader Ver 7.41 says
SPH-i350 Downloader has stopped working
WP7 Downloader Ver 7.21 says...
This device does NOT match select binary
WP7 Downloader Ver 7.05 says...
This Device is NOT retail model...
I get the same error as the others when I try to install Rainbow as well.
Any ideas or am I SOL?!?!?

Vanillalite said:
Having a similar issue. Samsung Focus just flashes the logo.
Whenever I try and use WP7 Downloader Ver 7.41 and select the 1.3 files the WP7 Downloader Ver 7.41 says
SPH-i350 Downloader has stopped working
WP7 Downloader Ver 7.21 says...
This device does NOT match select binary
WP7 Downloader Ver 7.05 says...
This Device is NOT retail model...
I get the same error as the others when I try to install Rainbow as well.
Any ideas or am I SOL?!?!?
Click to expand...
Click to collapse
Too bad same thing here

CRDeveloper said:
Too bad same thing here
Click to expand...
Click to collapse
How many computers have you guys tried this on? If the answer is one, try again.

2 laptops actually, i did the same thing as the one who opened this thread...
Is this totally lost?
I have a cable ready for the jig thing but still looking for the resistor. Will that help?

Mine was a lost cause....
Bought a jig from eBay... nada.... won't turn on.
Thought it may be the batter... so when and bought an extern charger and then tried again... nothing.
Tested jig on the only other phone I could... AT&T Galaxy Note.. it jumped to life and took it to download mode, no problems. So the jig works.
Mah Focus is da brick...
---------- Post added at 04:45 PM ---------- Previous post was at 04:40 PM ----------
EnderPsp said:
How many computers have you guys tried this on? If the answer is one, try again.
Click to expand...
Click to collapse
3 here... two laptops and an old Dell Desktop that's rock solid. It was there that I got the best results... and was able to actually flash something on what by then was an unflashable device (1.3 device with a 1.4 bootloader). I was able to overwrite some of the bootloader when both the phone an flashing app both locked up.

The WP7 Downloader Ver 7.41 was failing when the program was ready to start:
SPH-i350 Downloader has stopped working...
I got to trick the program by unplugging the usb changing the ports (My HP has 3 ports), and using the 7004 from this guy http://forum.xda-developers.com/showpost.php?p=25668230&postcount=181 the phone started copying
Code:
Detect COM7 Port
Detect COM5 Port
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 1] Confirm Model Name
[Channel 2] Confirm Model Name
[Channel 2] FLASH UNLOCK
[Channel 2] FLASH UNLOCK Success!!!
[Channel 2] Send Partition Table
[Channel 2] Partition Table is correct
[Channel 2] Erase MIBIB Region
[Channel 2] Write MIBIB Data
[Channel 2] MIBIB Download Success!!
[Channel 2] Erase FSBL Region
[Channel 2] Write FSBL Data
[Channel 2] FSBL Download Success!!
[Channel 2] Erase OSBL Region
[Channel 2] Write OSBL Data
[Channel 2] OSBL Download Success!!
[Channel 2] Erase AMSS Region
[Channel 2] Write AMSS Data
[Channel 2] AMSS Download Success!!
[Channel 2] Erase DSP1 Region
[Channel 2] Write DSP1 Data
[Channel 2] DSP1 Download Success!!
[Channel 2] Erase APPSBL Region
[Channel 2] Write APPSBL Data
[Channel 2] APPSBL Download Success!!
[Channel 2] Erase CSC Region
[Channel 2] Write CSC Data
[Channel 2] CSC Download Success!!
[Channel 2] Erase PDA Region
[Channel 2] Write PDA Data
[Channel 2] PDA Download Success!!
[Channel 2] FLASH LOCK
Phone turns off and then... its dead :crying:
My phone is now totally dead, it just wont turn on (didn't restarted, didn't finish the rebuild). I have the home made usb jig here but I don't have the 1k resistor jet, just 3 100k and it doesn't do anything.
What to do now? Game over?

Say it ain't so!
CRDeveloper said:
What to do now? Game over?
Click to expand...
Click to collapse
Say it ain't so! Anybody have a solution?!
I don't have much hope at this point, my 1 year old Samsung Focus will almost surely end up a brick...
Thanks in advance...

I wonder if Odin would help? I've checked, and it appears that Odin will send the Phone portion of the ROM to the Focus. MAYBE that will get something going again? It may also brick the phone as others have done, which is precisely why I have not sent it to my phone that is still working. But if you have nothing to lose, it may be worth trying...

SuperSport said:
I wonder if Odin would help? I've checked, and it appears that Odin will send the Phone portion of the ROM to the Focus. MAYBE that will get something going again? It may also brick the phone as others have done, which is precisely why I have not sent it to my phone that is still working. But if you have nothing to lose, it may be worth trying...
Click to expand...
Click to collapse
I tried using ODIN to send only the PHONE part of the rom(the .bin file) and it starts the process and then it says the result of the operation is failed. At least it doesn't crash like that other WP7 Downloader program...
The problem is that even ODIN only recognizes that one file from the original ROM. The other files from the ROM (CSC, etc.) seem to not be the correct file format for ODIN...
Also, maybe we should try to flash another ROM, not the original 7002 ROM...
Anyone else have success with ODIN?
Please share your experiences!
Sent from my SGH-I747M using xda app-developers app

SAMSUNG Focus logo stuck

Hello,
I have a samsung focus, and used it for nearly 1 year with no problem at all. I updated it with 7.5 mango(7720 i belive it is), and worked perfectly until a few days ago when it restarted for the first time. After that, if I played a game and listen to the music in same time it kept restarting, until yesterday when I tried to view the map and restarted and wont boot the windows and it is stuck in a cicle of samsung logo appears and disappears. I cant format it and I onle access download mode.
Any thoughts?
Software problem or hardware?
Thanks,

andyciser said:
Hello,
I have a samsung focus, and used it for nearly 1 year with no problem at all. I updated it with 7.5 mango(7720 i belive it is), and worked perfectly until a few days ago when it restarted for the first time. After that, if I played a game and listen to the music in same time it kept restarting, until yesterday when I tried to view the map and restarted and wont boot the windows and it is stuck in a cicle of samsung logo appears and disappears. I cant format it and I onle access download mode.
Any thoughts?
Software problem or hardware?
Thanks,
Click to expand...
Click to collapse
Looks like a software issue. You need to flash one of the ROMs from here. Check first what revision your Focus is.

flash to stock rom or flash custom ROM

EnderPsp said:
Looks like a software issue. You need to flash one of the ROMs from here. Check first what revision your Focus is.
Click to expand...
Click to collapse
Thank you for reply.
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
Disconnect COM5 Port
...and still the same problem, windoes wont boot and samsung logo appears and disappears

andyciser said:
Thank you for reply.
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
Disconnect COM5 Port
...and still the same problem, windoes wont boot and samsung logo appears and disappears
Click to expand...
Click to collapse
That looks like a bootloader problem.
If that didn't fix it... either ask for someone with more experience to help or you could go through warranty and say it happened when you updated.

Thank you for all your replies, nobody seems to know what happend to my phone, so I am going to send it to AT&T in the US. It's a bit unconvenient because I live in Europe but I have no other choice. I hope there will be no problem with my warranty.

Any solution? I cant send my phone to warranty.