I have strange issue with phone signal
it started week ago, it is almost lost all the time.
I'm using CLK with different ROMS starting from Typhoon to Tytung Nexus HD2 GB to Qualiza ARA DHD 1.2
my Phone is TMOUS with radio 2.15....
I have tried to replace sim card but no luck,
any clue about this issue, is it because i'm changing the ROMs frequently?
Note: it doesn't matter if the settings are set for 3G or 2G.
always low to none signal.
I have the same problem with and without flash (windows to android) -_- ! (Radio 2.15.50.14)
Yesterday I buy a new cover on ebay, I will try this :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350470435757
On this forum (in french), the guy had the same problem and resolve it :
http://www.planete-htc.com/index.php?mod=forum&ac=voir&id=24083
Switch to 2G network only in android settings.
Happened to a lot of people here, there is no fix for 3G yet.
michie said:
Switch to 2G network only in android settings.
Happened to a lot of people here, there is no fix for 3G yet.
Click to expand...
Click to collapse
even if it is on 2G only, signal still lost, i sensed that just a week ago, before that everything was okay.
do you think guys it is H/W problem? .... in Jordan we don't have HTC devices or any kind of support at all.
Hello all I have a PROBLEM!
I have an unlocked HD2 using AT&T, my signal is extremely weak so my thoughts were to add an Android Rom in hopes to increase the signal but I have tried several NAND Roms:
RAFDROID
HYPERDROID CM7
NEXUSHD2 GINGERBREAD
HYPERDROID GBX
ARKAT DOUBLESENSE
REDUX V1.2
I am using the MAGLDR 113, installing using CWM 3.2. I am not sure which radio i have... perhaps that's the problem?
It would recognize the AT&T network and would say registering to AT&T but after 30 seconds or so it would say unable to connect at this time.
PLEASE help I am currently phoneless.
Thanks
PS it doesn't have to be android anything with a signal will work
6xceo said:
Hello all I have a PROBLEM!
I have an unlocked HD2 using AT&T, my signal is extremely weak so my thoughts were to add an Android Rom in hopes to increase the signal but I have tried several NAND Roms:
RAFDROID
HYPERDROID CM7
NEXUSHD2 GINGERBREAD
HYPERDROID GBX
ARKAT DOUBLESENSE
REDUX V1.2
I am using the MAGLDR 113, installing using CWM 3.2. I am not sure which radio i have... perhaps that's the problem?
It would recognize the AT&T network and would say registering to AT&T but after 30 seconds or so it would say unable to connect at this time.
PLEASE help I am currently phoneless.
Thanks
PS it doesn't have to be android anything with a signal will work
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611787
Try this radio 2.15 its the newest one procedure is the same as installing magldr
1.make sure the phone is off
2 hold the volume button down and turn the phone on
3 connect your phone to your pc thru usb
4 flash the radio from your pc.
hope it helps
in the future post questions in Q and A section or you'll get flamed
Thanks for the link to the radio I appreciate it did not see to help the signal issue. In regards to improper posting that was an oversight on my part is there a way to delete it from here and post in the proper category?
it might just be your location...see if you get better signal elsewhere
casemandan said:
it might just be your location...see if you get better signal elsewhere
Click to expand...
Click to collapse
+1
Tapatalked u see
rom has nothing to do with the connection you're getting, if you have the latest radio(2.15.50.14) and the proper apn settings for att, then is definitely the service in your area. I have TMO and I get crap signal in my home with any and all roms, but once I'm outside I get good service, plus in data speed you'll only will get Edge/2G speed , but I'm sure you already knew that happens when using a TMO phone in ATT and vice versa .
I'm using my HD2 on AT&T and mine is working great. I'm running Rafdroid Desire HD Froyo. No signal problems at all.
6xceo said:
Thanks for the link to the radio I appreciate it did not see to help the signal issue. In regards to improper posting that was an oversight on my part is there a way to delete it from here and post in the proper category?
Click to expand...
Click to collapse
Lets check whether your device is having a loose connection or not first. Put on your wifi, stand some feets away from the router and see if you can connect. If your having weak signal, stand near the router and check. If you still have a weak signal put on your bluetooth and see if you can discover any other bluetooth devices.
If you are having problem with these two connection as well, then my friend its time to open up your device and prepare for surgery.
Else, despite getting full wifi and bluetooth, if you are still having network problems, then place an aluminium foil on the back side of your device in full.
now see if you are having any improvement. These are just preliminary tests to check whether your device needs some serious disassembling.
I'm having the same problem, although I do get connections sometimes but then when i try to send a text or make a call it says network unavailable. I do have gprs data turned off on my phone's account with ATT. I messed with some settings in the phone options after dialing that *# thing and it worked but like i said after one text it just stoppped and when I go into network settings and click att it says registering and then after a few seconds it says unable to connect
After a few more hours of searching I found a way to get a much me stable connection. However, sometimes I lose signal but not like before, when I used to get a warning notification in the taskbar thing. What you have to do is go into the special phone settings by going to the dialer and typing *#*#4636#*#* where it says wcdma preferred you need to change it to GSM only and do a reboot and you should get much better signal.
Sent from my HTC HD2 using XDA App
Ever since landing in delhi my phone is not able to catch 2G network properly at most 1 bar...i was using vodafone then switched to airtel, same result! i tried 3G network which works just fine but the speed is very bad, i feel like im using 2G...The problem is 2G doesnt work i tried stock, cm7, cm7.2 but no joy! It was working fine in Bangalore. I also tried baseband switcher and selected India on it but no help at all... When i put the sim in my nokia 7210 i get full network but not on my defy! :crying:
seems to be a hardware problem...
PLZ HELP ME if you can!
Motorola Defy
red lens
cm10 24sept MB526
HF5X battery
abhirulz94 said:
Ever since landing in delhi my phone is not able to catch 2G network properly at most 1 bar...i was using vodafone then switched to airtel, same result! i tried 3G network which works just fine but the speed is very bad, i feel like im using 2G...The problem is 2G doesnt work i tried stock, cm7, cm7.2 but no joy! It was working fine in Bangalore. I also tried baseband switcher and selected India on it but no help at all... When i put the sim in my nokia 7210 i get full network but not on my defy! :crying:
seems to be a hardware problem...
PLZ HELP ME if you can!
Motorola Defy
red lens
cm10 24sept MB526
HF5X battery
Click to expand...
Click to collapse
try with baseband 4.1 ..and configure your location..
FINEEEEE said:
try with baseband 4.1 ..and configure your location..
Click to expand...
Click to collapse
tried...didnt work!:crying:
You have your phone on proper network switch? (just incase you overlooked :angel
I have same issue with BSNL, it just doesnt work on 2G mode, no network but my airtel sim works without issues on 3G n 2G.
I am on CM9 GB kernel + SOC Defy.
abhirulz94 said:
Ever since landing in delhi my phone is not able to catch 2G network properly at most 1 bar...i was using vodafone then switched to airtel, same result! i tried 3G network which works just fine but the speed is very bad, i feel like im using 2G...The problem is 2G doesnt work i tried stock, cm7, cm7.2 but no joy! It was working fine in Bangalore. I also tried baseband switcher and selected India on it but no help at all... When i put the sim in my nokia 7210 i get full network but not on my defy! :crying:
seems to be a hardware problem...
PLZ HELP ME if you can!
Motorola Defy
red lens
cm10 24sept MB526
HF5X battery
Click to expand...
Click to collapse
Hi, It looks like the problem I have and which is location dependent but for me 2G works better than 3G. It seems that the Defy or CM10 is not working good in circumstances were it switches from one network technique to another. Reboots I have:
Reboot after switching automatically Wifi on with Easy Profiles. Effectively it then shuts down 2G/3G because Wifi is switched on.
At my work where we have indoor coverage with 2G antenna's. Much less reboots there if I put the phone on 2G only.
Some reboots I can't explain
I log my reboots with reboot logger from the play store. Pictures in Play store are not English but app is in English. Handy app!
I did play with several basebands but in the end the default baseband for my location worked best (3.4.2-145 Central Europe). More frequent reboots with others or the went info flightmode spontaneous.
No solution but you could play with the following settings:
Settings - In Wireless & Networks: More - Mobile neworks:
National data roaming
GSM//UMTS Network preference
Use only 2G networks
I did not find a combination which ends rebooting once in a while (a little less than one time a day on average).
Running CM10 20120924, Defy+
[Q] DefyPlus Root successful(?) 2g-GPRS messed up-Please Help
@Mods: If this thread is not placed appropriately kind move/merge as appropriate. I did try to search for this peculiar problem but was not successful. Thank you.
Hello everyone,
Today I pulled the trigger and rooted my Defy Plus inspite of all the misgivings I had about my ability to carry it off successfully. And in hindsight my misgivings seem to be very justified.
The details of my device are:
Build # 4.5.1-134_DFP-231 & Android ver 2.3.6
SBF : 45.0.2310.MB526.AsiaRetail.en.03
The rooting guide I followed was as per http://forum.xda-developers.com/showthread.php?t=1542956
Recommended SBF's were downloaded and the method outlined followed
The long and short of it is:
*Most likely the rooting has been successful - How do I know? Well I installed a screenshot application from Google which needs a rooted device and it said my device is rooted and it worked successfully.
* The problem? The problem is, my primary objective to root the phone was to enable some call recording app or the other to work and if that did not work go for WIUI GB or ICS custom ROM which if I understand correctly is configured to allow call recording. My data usage is minimal at best restricted to some emails , work related browsing when I am away from my office. For this I use a 2g connection and that suffices. However after the rooting if the network is set for 2g the device does not list my service provider, even if I do a manual search for service provider. The very same phone works flawlessly if I opt for automatic network selection and it defaults to 3g which I do not want due to cost implications.
Now is there a way to resolve this issue without rooting a custom rom? Or do I need to flash a custom Rom that to extricate myself from this mess? Or do I need to go back to factory settings using SBF the device is shipped with?
Thanks in advance for any help
Success - Baseband reset for India
I was facing the same issue , after rooting my phone as indicated in my earlier post.
Subsequent to that I installed WIUI Rom - the stable version - from here, and used the inbuilt Baseband utility to reset baseband for India. Issue resolved.
I own a Verizon Motorola Razr M, bought in ebay to an US seller. I am in Spain and I use Movistar SIM card
The phone came with stock JB 4.1.2, and therefore I could not unlock the bootloader.
I started using it, but it had a problem that I am not been able to solve so far: after some hours of use, with no problems with GSM and data connections, it suddenly looses both connections, although the signals on the status bar still appear. I take care that signals have gone when I take the phone to make a call or surf the web.
I have tried the following procedures:
Change the net settings to GSM/UMTS
I rooted the phone with motochopper 1.1.2 exploit
I installed Safestrap 3.12 in order to be able to install other available locked compatible roms.
I tried these roms, following this thread here in XDA: Clean ROM 1.0. Clean ROM 1.1, Barebone New Base, Stock Deodexed.SDswap-Locked & UnLocked BLs-xt907-9.8.1Q-94-1, but no luck. This last one uses the last radio, but no way.
I also installed the [PATCH][GUIDE] Patch to fully enable GSM on Verizon CDMA Android phones. I could only install it on Clean ROM 1.1 however. It has been impossible to install it on the other ROMS. In any case, no luck again with the patch installed. Here I had a big problem because as I still had these problems, I got into *#*#4636#*#* in the dialer, and touched the band selection option: suddenly, the net showed no signal more and I was unable to make it work again: I finally solved this by installing the stock firmware from here with RSD lite.
No way. I still have this problem and I can not use the phone. I have also tried with another SIM card, but the problem remains. It is a shame because when the connection works, the phone runs very well.
Any help would be very appreciated
More details
errotaxar said:
I own a Verizon Motorola Razr M, bought in ebay to an US seller. I am in Spain and I use Movistar SIM card
The phone came with stock JB 4.1.2, and therefore I could not unlock the bootloader.
I started using it, but it had a problem that I am not been able to solve so far: after some hours of use, with no problems with GSM and data connections, it suddenly looses both connections, although the signals on the status bar still appear. I take care that signals have gone when I take the phone to make a call or surf the web.
I have tried the following procedures:
Change the net settings to GSM/UMTS
I rooted the phone with motochopper 1.1.2 exploit
I installed Safestrap 3.12 in order to be able to install other available locked compatible roms.
I tried these roms, following this thread here in XDA: Clean ROM 1.0. Clean ROM 1.1, Barebone New Base, Stock Deodexed.SDswap-Locked & UnLocked BLs-xt907-9.8.1Q-94-1, but no luck. This last one uses the last radio, but no way.
I also installed the [PATCH][GUIDE] Patch to fully enable GSM on Verizon CDMA Android phones. I could only install it on Clean ROM 1.1 however. It has been impossible to install it on the other ROMS. In any case, no luck again with the patch installed. Here I had a big problem because as I still had these problems, I got into *#*#4636#*#* in the dialer, and touched the band selection option: suddenly, the net showed no signal more and I was unable to make it work again: I finally solved this by installing the stock firmware from here with RSD lite.
No way. I still have this problem and I can not use the phone. I have also tried with another SIM card, but the problem remains. It is a shame because when the connection works, the phone runs very well.
Any help would be very appreciated
Click to expand...
Click to collapse
The problem also seems to become worse with the use of the phone: at the beginning, coming from a factory reset, It can last some hours before the problem occurs. But since it happens from the first time, it happens more and more frequently and the phone can not be used any more. It seems that there could be a software issue.
Another try disabling fast dormancy
I´ve just disabled fast dormancy, because my operator Movistar apparently does not use this technology.
For this, I have modified 3 lines from build.prop system file, as indicated in another site.
The 3 lines are:
ro.mot.ds.fastdormancy.disable=true
telephony.lteOnCdmaDevice=0
ro.telephony.default_network=3
Having fast dormancy enabled when your operator does not support it, seems to drain battery, and could cause other problems. That´s why I´ve done this. I have used root explorer apk from Google store, it is free and it automatically creates a backup of build.prop file when you modify it.
I keep the fingers crossed, let´s see what happens.
Fast dormancy: yes but...
After some days using the phone with fast dormancy disabled (for this, I also added this line to build.prop: ro.ril.fast.dormancy.rule=0 ; I read this for ICS Roms, I do not know if this command is also valid for JB, any comment will be welcome), I still get some cuts (less I would say), but at least the phone tries to restart the connections. For this, I have also installed the apk from Google Play called 3g reconnect.
In any case, any comment would be appreciated.
Issue not solved
I still get data and voice disconnections when I use GSM/UMTS or only UMTS modes. They occur ransomly, and they also occur as soon as I use a WIFI connection. I can only use the phone on GSM only mode, which is frustrating.
Any advise?
errotaxar said:
I still get data and voice disconnections when I use GSM/UMTS or only UMTS modes. They occur ransomly, and they also occur as soon as I use a WIFI connection. I can only use the phone on GSM only mode, which is frustrating.
Any advise?
Click to expand...
Click to collapse
I do not go near *#*#4636#*#* anymore. So tell me do you use that to make these changes (phone info is the app name).
Choosing GSM/UMTS or GSM only
aviwdoowks said:
I do not go near *#*#4636#*#* anymore. So tell me do you use that to make these changes (phone info is the app name).
Click to expand...
Click to collapse
Hello,
I have tried both: using *#*#4636#*#* or using the usual phone settings. Sometimes I have also checked that the changes made with the usual settings appeared also dialing *#*#4636#*#*.
Yesterday evening, I tried selecting global mode instead of GSM/UMTS and it seemed to work for some hours, but today morming, the problem occured again. So far, the unique way I have found to avoid connection cuts off is using GSM ONLY mode. I have to say that I have tried with 2 different SIM cards but the result is identical.
errotaxar said:
.
Click to expand...
Click to collapse
Did you select the 3 dot menu & mess with the "band" settings?
---------- Post added at 07:08 AM ---------- Previous post was at 06:56 AM ----------
http://forum.xda-developers.com/showthread.php?t=2346623
I did that once, and all the signals disappeared. I restored the phone with RSD Lite, that appeared to be the unique way to have again signals working. Now I do not even dare touching these 3 dots.
errotaxar said:
I did that once, and all the signals disappeared. I restored the phone with RSD Lite, that appeared to be the unique way to have again signals working. Now I do not even dare touching these 3 dots.
Click to expand...
Click to collapse
What booby a trap? How many step into!
I don´t know if I am understanding you. I did that once because I did not know what else should I do to solve the problem. I saw that there was the possibility to choose theoritically between US bands and Cellular, and I entered in that menu. It is not so stupid to try that if you have already tried 100 other ways.
In any case, anybody has an idea about how to solve this problem? I´m sure I am not the unique person having this issue with this phone.
errotaxar said:
I don´t know if I am understanding you. I did that once because I did not know what else should I do to solve the problem. I saw that there was the possibility to choose theoritically between US bands and Cellular, and I entered in that menu. It is not so stupid to try that if you have already tried 100 other ways.
In any case, anybody has an idea about how to solve this problem? I´m sure I am not the unique person having this issue with this phone.
Click to expand...
Click to collapse
You are saying the problem is now still there. Yet the radio partition is fixed. Please restate what has been fixed with the rsd flash & what remains unfixed.
Well I think I have fixed and solved the problem: I initially copied the APN settings I had with my previous HTC Sensation, because the phone operator was the same (MOVISTAR), the SIM card too, and I have not moved. In these APN settings, the proxy was "undefined" as well as the proxy gate. I wonder if the radio stucks looking for a proxy each time or whatever. I tried yesterday with completely different APN settings, with a concrete Proxy and a gate... and now I have not had any issue in the past 24 hours. I will still wait a couple of days to see if that was finally the reason.
Which in any case would be silly, because I just applied what was working OK with my sensation, but...
New APN settings: let´s see
Well I think I have fixed and solved the problem: I initially copied the APN settings I had with my previous HTC Sensation, because the phone operator was the same (MOVISTAR), the SIM card too, and I have not moved. In these APN settings, the proxy was "undefined" as well as the proxy gate. I wonder if the radio stucks looking for a proxy each time or whatever. I tried yesterday with completely different APN settings, with a concrete Proxy and a gate... and now I have not had any issue in the past 24 hours. I will still wait a couple of days to see if that was finally the reason.
Which in any case would be silly, because I just applied what was working OK with my sensation, but...
After several days, the problem is still there. After setting new values in APN, it happens less often, but it still happens. I have to switch to GSM only mode.
2 days ago, I was surfing the net at quite high speed with no interruptions, for half an hour. I then shutted off the screen, on again some seconds later, and the connection was blocked, I had to restart the phone. It has to be a software issue.
I finally sold the phone
After concluding that I could never get rid of this problem, I sold the phone, informing that he would have to use mainly GSM only connection. Great phone otherwise, but with this issue.
This sounds like a Baseband Issue.
Europe I have found baseband:
sm_bp_101031.027.32.81P to be the most stable so far, with no H+ support though.
But most Carriers in Europe don't have H+ or LTE.
That baseband is part of build 9.8.1Q-66
Which can be all downloaded here:
http://sbf.droid-developers.org/phone.php?device=8
The baseband from 98.16.1 had H+ support in Europe but connections dropped like crazy.
Same with 98.12.4, we remedied that with Aussie Radio at the time.
Maybe this may help some International users with Data and GSM Loss
Germanese said:
This sounds like a Baseband Issue.
Europe I have found baseband:
sm_bp_101031.027.32.81P to be the most stable so far, with no H+ support though.
But most Carriers in Europe don't have H+ or LTE.
That baseband is part of build 9.8.1Q-66
Which can be all downloaded here:
http://sbf.droid-developers.org/phone.php?device=8
The baseband from 98.16.1 had H+ support in Europe but connections dropped like crazy.
Same with 98.12.4, we remedied that with Aussie Radio at the time.
Maybe this may help some International users with Data and GSM Loss
Click to expand...
Click to collapse
I'm on 9.8.1Q-94-1(98.30.1.XT907.Verizon.en.US) and wanna use it in Germany. any experiences with the radio compared to the suggested one. Or is there another way to boost the performance of the razr m? Compared to my razr I the signal and data quality is really poor...
edit: my baseband-version is: SM_BP_101032.021.32.80P
edit2: ok... now i've flashed several basebands... and the behaviour of the phone is always the same... with the australian baseband of xt905 it wasn't possible to get an hspa-connection. dunno if its enough just to flash the radio-fw?!?!?
so is there an other way to get more stability in my region? i tried to flash the radio from razr hd retail germany. but i think the razr m don't like it when I fool around. actually I love the mobile, so i don't want to make it angry... your suggestions are very much appreciated...