Database Users

[HELP] AT&T Logo on Facinate booting

Hello guys,
I have problem with my friends facinate.
I don't know what he did but when I tried to boot this phone, I see those logo.
I can't get into recovery mode or odin mode.
Please help me guys~!

brozroy said:
Hello guys,
I have problem with my friends facinate.
I don't know what he did but when I tried to boot this phone, I see those logo.
I can't get into recovery mode or odin mode.
Please help me guys~!
Click to expand...
Click to collapse
looks like he tried booting captivate firmware on his fascinate

nitsuj17 said:
looks like he tried booting captivate firmware on his fascinate
Click to expand...
Click to collapse
How can I get into odin3

Make sure you have the fascinate drivers.
Pull the battery.
Connect phone via USB to your computer.
Hold volume down button then press power.
That should boot it into download (Odin) mode
Sent from my SCH-I500-Fascinate using XDA App

K40 said:
Make sure you have the fascinate drivers.
Pull the battery.
Connect phone via USB to your computer.
Hold volume down button then press power.
That should boot it into download (Odin) mode
Sent from my SCH-I500-Fascinate using XDA App
Click to expand...
Click to collapse
It works on my phone. But not on this phone. Is there any other way?
Thanks

Only other way, that I am aware of, is to boot holding the volume down button with the battery in then connect to USB after the downloader launches.
Did your friend possibly install CWM? If so try holding both volume buttons down and going through Clock Work Mod.
Sent from my SCH-I500-Fascinate using XDA App

Also if you can boot using the second method but don't have CWM installed you can possibly add another ROM named update.zip to the root of the sdcard and use the standard recovery launcher.
This information may be innacurate I come more from Palm Pre tweaking, but I believe that's what I read.
Sent from my SCH-I500-Fascinate using XDA App

I have never seen a Galaxy S phone not be able to get to download mode.. but I think I've only seen one other person dumb enough to flash a Capitvate rom / kernel onto a Fascinate..
That being said, if removing the battery (don't put it back in), plugging in USB and holding volume-down doesn't bring up download mode, you're screwed. The phone obviously needs to be made inoperable before returning. An easy way to do that would be to disconnect the cable to the screen. Alternatively, and much more dangerously, you could microwave if for a few seconds at a time until it dies.

namebrandon said:
Alternatively, and much more dangerously, you could microwave if for a few seconds at a time until it dies.
Click to expand...
Click to collapse
Are you serious?

Inoperable would be a last ditch effort in my opinion. Mistakes happen. These are the kind of mistakes that not only the OP and his friend learn from but also the community as a whole. If we can get him through this we also learn how to help others that make similar mistakes.
Modding / hacking whatever you wish to call it comes down to learning. We learn what works and what doesn't and we try to help others not make those mistakes. I prefer to try everything before nuking a phone that can be recovered.
Sent from my SCH-I500-Fascinate using XDA App

K40 said:
Inoperable would be a last ditch effort in my opinion. Mistakes happen. These are the kind of mistakes that not only the OP and his friend learn from but also the community as a whole. If we can get him through this we also learn how to help others that make similar mistakes.
Modding / hacking whatever you wish to call it comes down to learning. We learn what works and what doesn't and we try to help others not make those mistakes. I prefer to try everything before nuking a phone that can be recovered.
Sent from my SCH-I500-Fascinate using XDA App
Click to expand...
Click to collapse
Thanks. I hope there is other way to flash it.

Keep trying holding both volume buttons down while powering up. If you can get into the default recovery or the download interface this can be corrected.
Sent from my SCH-I500-Fascinate using XDA App

namebrandon said:
I have never seen a Galaxy S phone not be able to get to download mode.. but I think I've only seen one other person dumb enough to flash a Capitvate rom / kernel onto a Fascinate..
Click to expand...
Click to collapse
Yeah. I know. He is very young kids. I think he didn't even read title of thread.

Sorry am at work, any progress on getting the downloader to launch?
Sent from my SCH-I500-Fascinate using XDA App

I would gather he is at the vzw store signing into the kiosk right now and waiting for his name to be called.
good day.

Was just trying to take the small amount of information I have acquired and help the person out.
Sent from my SCH-I500-Fascinate using XDA App

K40 said:
Sorry am at work, any progress on getting the downloader to launch?
Sent from my SCH-I500-Fascinate using XDA App
Click to expand...
Click to collapse
Still stuck in att boot logo

brozroy said:
Still stuck in att boot logo
Click to expand...
Click to collapse
To be honest, you cant fix it.
You can get it to boot once again if you can ever get it back into DL mode, but the phone wont work again. Not until we get a leak for a complete odin package, and that isnt gonna happen anytime soon.
I posted on my odin thread and pretty much any other thread i have done that you should not flash any other galaxy s device's firmware to the fascinate, they are not interchangeable like that. I hope he has insurance on his phone.

fallingup said:
To be honest, you cant fix it.
You can get it to boot once again if you can ever get it back into DL mode, but the phone wont work again. Not until we get a leak for a complete odin package, and that isnt gonna happen anytime soon.
I posted on my odin thread and pretty much any other thread i have done that you should not flash any other galaxy s device's firmware to the fascinate, they are not interchangeable like that. I hope he has insurance on his phone.
Click to expand...
Click to collapse
Thank you guys. I'll just tell him. Good night
Sent from my Android

HELP phone, yeild, computer sing! (BRICKED?)

PLEASEEE!!! help me out i tried upgrading from kies mini to froyo. I did this with success earlier in the past on my old vibrant but had it replaced to a referbished one and i tried upgrading it now.. but my vibrant was stuck at downloading the uprade on kies mini at 1% for half an hour... and the vibrant had the android shoveling yellow sign saying do not turn off target... for half an hour as well.. I knew something was wrong there because it didnt take even close to that long last time..
NOW I tried unplugging the usb wire restarting the phone in emergency mode still nothing... now all i have is a cellphone...yeild sign... computer icon showing..
PLEASE HELP!!!

Dont worry you totally didnt brick your phone. Its pretty common, can you get your phone into download mode? If you can then just odin to stock.
1.Take your battery, sim card and SD card out
2. Plug in USB Cable
3. Hold volume up/down and plug in battery (There are a few ways of doing download mode and I believe its phone specific, or if you have bootloaders installed its different as well, google around a bit...
4. Start odin and presto, your phone works again!

hey thanx... I just did that.. I never used odin but i installed odin with all the files... I believe my vibrant is hardware locked because i was trying to get into download mode for 2 hours with different techniques.. such as just volume keys and power button... taking out the battery holding volume keys then putting it back in.. but nothing put me into a downlaod mode... somehow odin still found my phone while i was still stuck under that picture...
I loaded the .pit file without the jfd image.... becuase i didnt know what window i was suppose to load the jfd image from... like pda.. or etc???
anyway so i just loaded the .pit file and clicked start it reset the phone and the phone went into restart mode and it turned on fine i checked it works fully... lol.
It makes no sense... was i suppose to load the jfd file somewhere?????
i still want to upgrade my vibrant to 2.2... but now whenever i turn on the keis mini it promps me to emergency recovery upgrade... so i tried doing that and went into download mode since now i can.. and plugged in my phone but the progress bar on my computer for upgrading never moved from 0%... its odd... am i doing something wrong?
so again i disconnected and "bricked" my vibrant again lol... went into odin followed the same steps just loading the .pit file and it reset the vibrant back to normal again lol...
Im so confused yet happy that i have my phone working but i still want my froyo... i love the fact that i can use yahoo video messaging on it with froyo and have flash and other benefits..
any advice?
Thanx again

try this...........
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
put pit in pit and tar in pda on odin

Connect it to the PC and see if ODIN recognizes it.
If it does, you are safe, flash stock.
EDIT: nvm, didn't notice the third post was yours.
Anyways, if ODIN can STILL recognize it, get the first from the link on the post above, FOLLOW INSTRUCTIONS and enjoy your again-useful phone.
I had that same issue once.

Try a JIG. And do a search, I see like 50 posts a week like this.

First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App

AlexSochi8 said:
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It should.
Sent from my GT-I9000 using XDA Premium App

Bricked
I have a similar issue, was soft bricked, Odin to stock then, while using Mini Kies to upgrade back to Froyo the phone turned off and never came back on. I cannot get any response from the phone as far as light's or sounds. Checked a few batteries and still no use. I'm curious if anybody else has had a similar experience?

so if it should solve the unregisted problem... where I put in the pda file... is it possible to put in the last froyo there so odin could flash froyo on my phone so basically i wont have to go through kies process?

odin back to 2.1 then root and then flash a 2.2 rom way better then a stock 2.2 rom

Dan_Brutal said:
Try a JIG. And do a search, I see like 50 posts a week like this.
Click to expand...
Click to collapse
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App

dsuycott said:
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yeah man. Jigs are the balls. Saved my ass this morning with a bad bootloader flash. I got lucky though.....
Sent from my GT-I9000 using XDA Premium App

Make sure you have the right odin files, once you have gotten back to normal just do a factory reset on your phone if that is possible. Then root, flash, and do whatever you want to do. Without your proper files for odin you'll get bricked or get something different.

How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App

dcboi said:
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Do you have the drivers installed on your PC?
Sent from my GT-I9000 using XDA Premium App

Dan_Brutal said:
Do you have the drivers installed on your PC?
Yes, not sure what changed but I plugged the phone in again and Odin recognized it, the file I loaded is PDA_T959UVKB5.tar.md5, the process has hung up at SetupConnection...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App

id keep trying it odin is finicky! maybe try different usb ports

ok guys i know i aksed for a lot of help.. but i have a newly discovered problem.. when i connect my vibrant thru the original usb port to transfer files back and forth it never lets me transfer even the smallest picture image... on both internal 16gb or sd... the phone computer just constantly shows transferring animation.... i tried many times.. i even scanned the phones hard drive and sd card for errors... nothing... could it be i messed something up with kies? or thats why kies in general never went with the upgrade past 1%?
its a refurbished phone.. when i got it.. i uploaded my old pics without a problem with the same usb cable..... its weird.... i dont know what to do? what is it likely the phone itself or i messed it up with kies upgrade????
please help.. its frustrating me

[Q] Need an advice

Trying to Odin the Rom and everything stops on Factoryfs.rfs.
Tried different roms
Please, what I need to do? Help me please?
When I'm trying to boot, I can't even get to Samsung Logo. Instead I have three pictures, some pictures looks like a phone, and something else..
What is it? Who can say?

Use a different port/cord
Sent from my SPH-D700 using XDA App

Are you putting it in the PDA or Phone slot?

tkoreaper said:
Are you putting it in the PDA or Phone slot?
Click to expand...
Click to collapse
Phone slot

run odin as admin and add the Pit file also.

marcusant said:
Use a different port/cord
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
+1... i've had this problem before and a new cord helped. and if you're using a tower, make sure to plug the cord into the usb ports on the back. also make sure you're only checking the boxes for the f. reset time box and the phone slot where the tar goes. if that doesn't work, also try the pit. also, try redownloading the tar u have.

Definitely use different cord and try having a full battery. It doesn't effect most but I freeze when I ruminants Odin with less than 50% battery
Sent from my SPH-D710 using xda premium

Just as suggested in the other 30 threads just like this in the past month, try another cord like a Palm or Blackberry cord.

I tell this to everyone on odin problems, but in the case where you get stuck on factory.fs, please make sure you're flashing that tar on PDA. Another XDA user said it doesn't matter, but older versions of odin are sensitive with that. (Like the version I have)

did i brick my phone?

Tried to install odin and it wouldn't pass.
Took the usb out and tried to reset the phone & now it's stuck here
i.imgur.com/3kyQ9.jpg
Help

Your phone isn't bricked. Just take out the battery, if the usb cord you used is the stock samsung cord try using a different usb. Take out your sd card as well and while the battery is out go into download with usb cord plugged in and re-odin.
Always remember if you can see something on the screen your phone isn't bricked.
Sent from my SPH-D700 using XDA Premium App

thanks so much
unfortunately, all i have is the stock samsung usb.
Could that be why odin failed?

mrmondaynight said:
thanks so much
unfortunately, all i have is the stock samsung usb.
Could that be why odin failed?
Click to expand...
Click to collapse
It's okay, just try to re-odin and see what happens. You should invest in a blackberry usb cord, samsung stock usb is unreliable imo.
Sent from my SPH-D700 using XDA Premium App

mrmondaynight said:
thanks so much
unfortunately, all i have is the stock samsung usb.
Could that be why odin failed?
Click to expand...
Click to collapse
Very possible! You might want to try a different USB port also.

Tried to re odin and it stays stuck here.
i.imgur.com/WjwdY.png
Gonna buy another usb tomorrow.
Also, how do i get OUT of download mode?
If i try to reset the phone, i get the same screen as before.

mrmondaynight said:
Tried to re odin and it stays stuck here.
i.imgur.com/WjwdY.png
Gonna buy another usb tomorrow.
Also, how do i get OUT of download mode?
If i try to reset the phone, i get the same screen as before.
Click to expand...
Click to collapse
You might have made an error while odin-ing. Tell me the steps you took to Odin?
Sent from my SPH-D700 using XDA Premium App

I followed this video
youtube.com/watch?v=kwFRzzIqouE
downloaded the kernal gb file
opened odin
made sure only auto reboot was click
pressed pda to add the kernal file
went into download mode(usb was out)
once in download mode, attached the usb
waited to see the yellow box that says com5
pressed start.

mrmondaynight said:
I followed this video
youtube.com/watch?v=kwFRzzIqouE
downloaded the kernal gb file
opened odin
made sure only auto reboot was click
pressed pda to add the kernal file
went into download mode(usb was out)
once in download mode, attached the usb
waited to see the yellow box that says com5
pressed start.
Click to expand...
Click to collapse
I don't think kernels are supposed to be odined that might be your problem right there.
You can flash kernels through CWM, no need for odin.
Just odin back to stock using the info from QBKing odin video.
Sent from my SPH-D700 using XDA Premium App

masaidjet said:
I don't think kernels are supposed to be odined that might be your problem right there.
You can flash kernels through CWM, no need for odin.
Just odin back to stock using the info from QBKing odin video.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
It didn't pass, so it should still be stock, no?
Also, i don't see the info on how to revert back to stock

mrmondaynight said:
It didn't pass, so it should still be stock, no?
Also, i don't see the info on how to revert back to stock
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=MFazLOVXPns

Everything you need to know is written in the thread.
http://forum.xda-developers.com/showthread.php?t=1052813
I recommend odin-ing the EC05.tar that's there, instead of the EL30.tar because it's easier to root and you'll be able to flash a custom stock EL30 GB easily(after updating your CWM to CWM5)
Sent from my SPH-D700 using XDA Premium App

You didn't do anything inccorect its just that crappy stock cable.
And yes the gb3a.tar should've been flash prior to clockworkmod for it to stick so you followed correctly its not an error on your part just a flawed cable go out and buy a new one like a blackberry or something really good not a cheap one .
Good job guys thanks.
Sent From My SPH-D700 Running Android 4.0

Big Goron said:
You didn't do anything inccorect its just that crappy stock cable.
And yes the gb3a.tar should've been flash prior to clockworkmod for it to stick so you followed correctly its not an error on your part just a flawed cable go out and buy a new one like a blackberry or something really good not a cheap one .
Good job guys thanks.
Sent From My SPH-D700 Running Android 4.0
Click to expand...
Click to collapse
You should ask him do he want you to root it for him, with your rooting service.
Sent from my SPH-D700 using XDA Premium App

masaidjet said:
You should ask him do he want you to root it for him, with your rooting service.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I was going to ask but I figured he had it down pat the video is pretty much solid.
Just needs a better cable anyways to the original poster if you would like I can remotely root your phone via teamviewer. Google it install it and pm me the id and password...if of course you'd like me to do it.
Sent From My SPH-D700 Running Android 4.0

see, now that'd be awesome.
Downloading now.

mrmondaynight said:
see, now that'd be awesome.
Downloading now.
Click to expand...
Click to collapse
Did you get a non stock usb?
Sent From My SPH-D700 Running Android 4.0

still stock usb
Followed the steps here
http://forum.xda-developers.com/showthread.php?t=1052813
Took longer than 10 minutes, so i unplugged to start again..now i can't get into download mode. Screen is completely blank.
I guess now it's bricked

mrmondaynight said:
still stock usb
Followed the steps here
http://forum.xda-developers.com/showthread.php?t=1052813
Took longer than 10 minutes, so i unplugged to start again..now i can't get into download mode. Screen is completely blank.
I guess now it's bricked
Click to expand...
Click to collapse
Pull the battery for a while, and see what happens.

okay, that worked.
Got it back into download mode.
Still have the stock usb, so im sol till it's replaced. No phone ftl

Need Help, i Bricked my S5 and Odin is failing.

Hi guys, i have a GS5 AT&T SM-G900A. My phone is rooted with towelroot. Last night it got stuck on the android bootup screen and from there nothing else. I try to flash it back with Odin but it keeps failing. Anybody has any idea how can i get this phone to work again?

..

fffft said:
Of course you'd prefer a fast answer. We all do when something happens. But it's presumptuous to label a post urgent as if your personal predicament is somehow more important than everyone else's. I know that urgent labels discourage me from helping as much as I otherwise would. Certainly I won't subscribe to your thread unless you remove the urgent label.
You also failed to provide us much information. In particular critical details like an Odin log, verbatim Odin errors, Odin version, your firmware version, et cetera.
First, boot to recovery mode and wipe your system cache. Then see if your phone will reboot normally. If not, then you need to repair it with Odin. And no one will be able to more than guess at what you did wrong unless you provide more details.
Click to expand...
Click to collapse
Thank you sir, sorry about the urgent label. i am trying to take off the urgent label but i am not able to edit that part here.
I am using Odin V3.07, i am trying to post an screen shot of it. My firmware is kitkat 4.4.2. I already did the recovery mode and wiped the system cache but nothing.

..

fffft said:
Edit /Delete > Go Advanced > Title
An Odin log or even screen shot would be invaluable. And you still haven't told us the exact file name that you are trying to write to your phone with Odin?
At a guess, it's just Odin being temperamental. But I am only guessing since we don't have much information about your configuration yet. Odin is infamous for being sensitive to USB timing just like IOS is.
Use the newer Odin 3.09. Write a pre June 6th build of stock firmware to your phone. Temporarily disable any firewall, antivirus, antimalware, et cetera software on your PC. Do not use a USB hub. Try a different USB cable and USB port. The latter is important. Odin often fails because of a noisy USB cable. Use, borrow or buy a different one that appears to be well constructed.
Also crucial. Ensure that you entered download mode by pulling your battery and then pressing and holding in sequence volume down + power.. If your Odin write fails, do not close the Odin window. Pull your phone battery again, replace it enter download mode again and then press the start (write) button on the Odin screen again. It's important that Odin screen remains open through out.
.
Click to expand...
Click to collapse
Thank you so much, all of those are great tips. I will try again tonight cause right now i am at the work computer. I will also have more info about the file i am trying to write in Odin. Thank you again for your great help and patience.

So i can't catch a break, now my laptop hard drive is making a ticking noise and i can't use it till i fix it.

Finally fix my laptop, Odin still failing like before. I changed computers and many usb ports and cables and nothing still stuck on boot.

Dra444 said:
Finally fix my laptop, Odin still failing like before. I changed computers and many usb ports and cables and nothing still stuck on boot.
Click to expand...
Click to collapse
First pull the battery, wait 30 seconds and boot in recovery mode and data factory reset. If that fails disable Kies in windows task manager. Power down, pull the battery and wait 30 seconds and then reboot in downloadmode and try again.

Thank you so much everyone, after many sleepless nights I finally figured it out. Somehow the firmware from sammobile wasn't working in Odin. I download one from here and it pass right away. Got my phone back
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

What file, link did you use. Trying to fix fiancees phone having problems after last update and wanted to back to original furmware. Odin making me mad.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

cm0818 said:
What file, link did you use. Trying to fix fiancees phone having problems after last update and wanted to back to original furmware. Odin making me mad.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2714455
This is the one I used, good luck man. It pass right away in Odin. Only thing I don't have no more is the setting to shut off the camera shutter sound but that's no big deal.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

cm0818 said:
What file, link did you use. Trying to fix fiancees phone having problems after last update and wanted to back to original furmware. Odin making me mad.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I used, good luck man. It pass right away in Odin. Only thing I don't have no more is the setting to shut off the camera shutter sound but that's no big deal.
http://forum.xda-developers.com/showthread.php?t=2714455
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

..

cm0818 said:
What file, link did you use. Trying to fix fiancees phone having problems after last update and wanted to back to original furmware. Odin making me mad.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I used, good luck man. It pass right away in Odin.
http://forum.xda-developers.com/showthread.php?t=2714455
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

cm0818 said:
What file, link did you use. Trying to fix fiancees phone having problems after last update and wanted to back to original furmware. Odin making me mad.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
I feel your pain, this is the one I use. The one that kept failing was the one from sammobile. Feels great having my phone back. Now I need a custom recovery mode just in case.http://forum.xda-developers.com/showthread.php?t=2714455

fffft said:
@Dra444
Glad you got your phone working again. Please link me to the firmware file that wasn't working for you to, so that I can try to figure out what was wrong with it. Perhaps find a way to identify bad files in the future. Or at least build a list of known good /bad firmware builds.
.
Click to expand...
Click to collapse
Thanks man, well I would need to upload the big file here. I almost gave up and then xpa came to the rescue.

..

fffft said:
xda?
You don't need to upload any big files here. Just a link or the exact file name of the troublesome build.
.
Click to expand...
Click to collapse
Oh Ok, here is a link to the firmware from Sammobile. Anyway i could get back the setting to shut off the camera shutter sound off? My Stock firmware had it before. http://www.sammobile.com/firmwares/3/?download=28224

..

fffft said:
For the camera shutter sound, check these two files.
After editing, check that the file permissions are 0644
Edit or add this parameter.
/system/csc/feature.xml
<CscFeature_Camera_ShutterSoundMenu>true</
CscFeature_Camera_ShutterSoundMenu>
Edit or add this parameter
/data/local.prop
ro.camera.sound.forced=0
.
Click to expand...
Click to collapse
Thanks man, i am still learning here. Can you take me step by step for this, don't want to mess my phone again.