Database Users

[Q] Can't echange due to ROM update

Hi Guys, I have had this phone for around a week now. I have it rooted and installed a T-mobile ROM. The problem I am having is that I cannot do the 3 button trick. I have been browsing the forums and everyone who is having this problem is told to exchange it.
Since I have a different ROM, and accidentally wiped my phone during the install not very smart on my behalf). My phone boots up with this ugly pink "stick together" logo and irritating sound.
Is there a download where I can change it back to the original one that came with my Bell?
I originally posted this in the Vibrant section and realized that more Bell users were over here in the forum. Sorry for the double posting.

ayy yai yai viejo... this is complicated.
Where are you in Canada?
try these methods that people have tried,
http://forum.xda-developers.com/showthread.php?t=754673&page=3
some of them worked, some of them not, but still should try it, to at least get it to Download mode, so you can flash it back to the stock JG9 or JH2 ROMs

I am unable to do the three button trick, but through ROM manager I can load other ROMs. I just don't know where I can download a stock ROM?
I am located in Calgary, Alberta.

good, at least you got that working
go to the ROM Manager topic in Development section and ask for help there for the ROM that you need to fix the phone.

Thanks for your input guys, I actually ended up taking at back and told them I accidentally loaded the wrong ROM. And without the three button enabled I was unable to flash it back to the proper ROM. Thus killing two birds with one stone. And now I have a device that has the 3 buttons enabled.

nice! good to hear that

[Q] touchscreen Problem

Hi guys would be grateful for any help in this matter. I have recently purchased a HTC Wildifire which was functioning perfectly until I attempted to upgrade to android 2.2, when I did the touchscreen and buttons now refuse to respond to any input, both were working fine before the update was installed. I have tired Hard Reset and Recovery Mode both to no avail. I was wondering if you had any suggestions of how to fix this. The phone is currently not rooted and is running a T-mobile branded rom version 1.25.110.1

...
I have exactly the same problem. Neither touch-screen nor any buttons work after installing Android 2.2 on my Wildfire. Interestingly, I am also with T-Mobile. Does anyone know how to deal with this fault?

Still no luck trying to fix this. I've tired to reflash the stock T-Mobile Rom RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe but everytime i'm faced with the bootloader version 140 error. I can't create a goldcard because the touchscreen doesn't work hence can't enable USB debugging. I'm really at wits end dunno what to do, seems i'm just going to have to send it to HTC for repair =/

[Q] Why can't I flash ROMS properly?

Hey guys. I'm kinda new to this so forgive me if I say something wrong or confuse you guys. So I bought my Gt540 on ebay. Little did I know that it was branded by a Portuguese company called TMN. So I decided to flash my phone with different ROMS with the kdz updater. Essentially I wanted to unbrand it. So every time I flashed it with a different ROM other than the branded TMN ROM I keep getting errors such as com.android.phone and com.android.settings has stopped unexpectedly. The phone error would constantly pop up. The settings error would pop up when I would access the settings. When I flash it with the original TMN ROM the phone works perfectly but with all the excess bloatware. I also tried the goldcard thing and I don't even know if that works for this phone or not. also when flashing the ROMS my applications would still be there afterwards even my settings are intact. The roms i've tried are all v2.1. I've spent many hours trying to unbrand this phone and install a generic ROM on it, so a point in the right direction would be nice. Thanks.

why dont you flash a fastboot enabled kdz then install recovery and CM7

Wipe
Have you fully wiped your data?

Fastboot?
I think you need fastboot for it (not sure).
To go to fastboot, you need to hold the camera button while turning on your phone (when the LG logo comes up). If the screen becomes blank, then you've entered fastboot mode. More info can be found at http://forum.xda-developers.com/showthread.php?t=802895. It has a ROM that has fastboot, so you can flash that. (The thread provided is not only for the update for Android 2.1 but for fastboot also).
Sorry for unnecessary additional post.

[Q] cant access phone. settings has failed

Hello all
i havent used my device inwhile since i got a different phone so i wiped it and now when i start it up and it goes through attready2go but right after the first step it says settings has stopped working and i cant move on from there.
the firmware is 4.4.2 i believe and also rooted. I couldnt find any fixes online, anyone have any ideas? or a way to flash it and install a cyanogenmod so i dont have to deal with attready2go.
thanks to anyone that can help

Clean it up with Odin by flashing NB1 or whatever compatible.

[Q] [Help] Don't know What's the model of my s4

Hi guys,
I've bought a used s4, and after some time spended knowing the new cell phone I saw on the boot screen "Galaxy GT-I9515L" and start to look for a custom rom to this model. But there isn't any one right?
But there's some weird thing , in the back part of the cell where's located the battery is written model "I9505" and the box that came with it have the same thing, "model "i9505".
But when I tried to install a custom or the original rom for this version using the Odin an error message appears and I can't install. Then I tried to put a original lolipop version to "I9515L" and works fine whitout problems and errors.
So what can it be? Maybe the older owner had put an wrong rom? If so, how can I fix this?
Sorry for my bad English. Hope that you guys can understand and help me.
Thanks

Boot into download mode. There is your model.
Ignore everything else, just look at the download mode.