recently, I've got a problem when I'm attempting to connect nokia BH 106 bluetooth headset to my tombstone 2, but failed and failed. the headset just didn't appear in my device list!
my SE liveview is on its way, and I'm worrying about whether it will work normally with my tombstone 2 or not...
so, could you help me? or just tell me whether liveview will work normally or not......thanks a lot!
sent from my Milestone 2
Have you read the manual for the BT handsfree and put it into pairing mode before trying to pair it?
Szadzik said:
Have you read the manual for the BT handsfree and put it into pairing mode before trying to pair it?
Click to expand...
Click to collapse
I tried to reset it to factory settings, but this didn't work. My SE liveview works very well with my tombstone, so I sold the headset. Anyway, thanks a lot~
sent from my MOTOROLA Milestone 2
Related
Hi,
I've just bought a Motorola HS810 for my O2 XDA 2 (I have uninstalled the pre-installed O2 software) and cannot seem to get them to work together. The device is bonded ok on handsfree mode but doesn't seem to respond to anything that is sent from the headset. I've noticed there seems to be some fix going around from http://bluetooth.i-networx.de/ but not sure if this is relevent. Any help is much appreciated.
Thanks,
John.
it's not working on my end as well
me bad, it's working
i forgot to enable the BT Headset profile
i am total novice so pardon me if i ask some stupid question =s
I am using Vodafone V1605 with standard rom 1.20.161.6
i have been trying since ages to pair my bluetooth stereo headset (SAMSUNG SBH-100) with my V1605 but phone doesnt find the headset when i search for bluetooth devices.
do i need to upgrade rom or something or what is the actual problem, can anyone help me Please!
power2rule said:
i am total novice so pardon me if i ask some stupid question =s
I am using Vodafone V1605 with standard rom 1.20.161.6
i have been trying since ages to pair my bluetooth stereo headset (SAMSUNG SBH-100) with my V1605 but phone doesnt find the headset when i search for bluetooth devices.
do i need to upgrade rom or something or what is the actual problem, can anyone help me Please!
Click to expand...
Click to collapse
I hate to ask the obvious, but did you put your headset into discovery mode?
power2rule said:
i am total novice so pardon me if i ask some stupid question =s
I am using Vodafone V1605 with standard rom 1.20.161.6
i have been trying since ages to pair my bluetooth stereo headset (SAMSUNG SBH-100) with my V1605 but phone doesnt find the headset when i search for bluetooth devices.
do i need to upgrade rom or something or what is the actual problem, can anyone help me Please!
Click to expand...
Click to collapse
No. First make sure your headset is in Pairing MODE. Usually the led will be ON solid or BLINKING very fast. Some have a different color to show if they are in PAIRING MODE. Then turn on the phones bluetooth and add a new paired device. If it does not show up then either the headset is not in pairing MODE or it is not working properly. Hope this helps you.
Has anyone had any problems pairing their X1 with any Nissan or Inifniti cars? There seem to be some mumblings on the web about their cars and WM6 devices and I've had no luck getting it to work on my '08 G35. Thanks.
bluetooth pairing
i just checked the aproved phone list for your g35 and the x1 is not aproved by infiniti. only certain phones will link to our cars others will not
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
it also depend if you both have navagation or not
elee888 said:
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
Click to expand...
Click to collapse
I don't have the navigation so I just click the phone button, tell it I want to pair a new device, and have my X1 start searching. At least now I know it can be done. Thanks for the reply
Well... I do have the navigation. So maybe the pairing process is a little different. But it should work though, it even allows me to download the whole phonebook into the car. Something my other phones in the past did not allow me.
baashha said:
Managed to solve this now.
Of course both Merc & SE didn't have any good solutions.... so had to continue googling & XDA-ing... This is what I did:
i.) Jetware, as I posted earlier has been removed.
ii.) I still had the SAP Profile addition downloaded from one of the forums in XDA on.
iii.) Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
the default is 5898764 (Decimal) which is "Telephone (Smartphone)" which you would think would work. Changed to 5374476 (Decimal) which is a normal phone.
iv.) Restarted the phone.
v.) Started the pairing process from the car - failed as per before.
vi.) Started the pairing from the phone, and they work!!
Now, they pair automatically as how they would before....
Ram
Click to expand...
Click to collapse
this is how i got mine working with my pioneer deck.
here's the link to the SAP Profile he was talking about.
http://forum.xda-developers.com/showpost.php?p=997872&postcount=166
hope this works for you.
which PIoneer do you have?
I have the DEH-P5900IB and a BT adapter, and i can't get my X1 connect.
All my previous phones worked fine.
it looks like the X1 won't let me pair without passcode, and the radio says Error.
Do you mind explaining exactly how you did it?
Thanks
i have the DEH-790BT.
what i did was after i changed what i mentioned above, then i set my deck to be able to be noticed by other bluetooth devices, then added it through my X1. After I added it through my phone it said successfully connected on my deck and the phone displayed it connected as wireless stereo and hands free. now the only weird thing was it was trying to connect as both the wireless stereo and hands free which seemed to mess with the deck, so I had to turn off my ignition and turn my car back on for it to actually recognize the connection fully. oh and the passcode if you connect through the deck to phone like I did it should be default '0000' but i would check your manual just to be safe, and if your connecting through your phone to the deck (which i haven't tested so I don't know if it works) you can pick your own passcode, which i suggest just making 0000 or nothing.
I have a problem also with my HTC Touch HD (Blackstone)
I can pair with my Nissan Qashqai carkit but soun dis very bad, and the caller on the otherside doesn;t hear anything.
Strangly, but try, when during a call i switch from carkit to phone and back (using the options in my carkit/buttons on stearing wheel) everything is fine!
Checking the internet learned me that this is related to the bluetooth stack (or settings) in WM6.1 (and 6.5 also)
So does anybody have any idea how to solve this, maybe by registry changes or maybe by even "downgrading" the Bluetoorh stack to 6.0 or maybe even 5.x.
Maybe it is also possible to replace the complete MS stack for an other stack?
Hi guys I got the Arc and absolutely loving it..but got a small problem..I cannot connect the bluetooth headset the phone does not find it..The 1st time it was connected to a N95 and worked fine..Now I have unpaired form the 95 but still the arc does not find it when searched..Any solution..
Thanks
Which bluwtooth headset is it?
its the standard one i got with the phone...The one that you got to plug in ur headset..So its not like wireless..
blueblood619 said:
its the standard one i got with the phone...The one that you got to plug in ur headset..So its not like wireless..
Click to expand...
Click to collapse
Plug into headset? And you call Bluetooth? Wireless?
Can you tell us the model?
Oh, my......
prathaban said:
Plug into headset? And you call Bluetooth? Wireless?
Can you tell us the model?
Click to expand...
Click to collapse
Sorry about the confusion guys..Even I dont know y they call it bluetooth headset..But still you got to connect via bluetooth...
The model is MW 600
My mw600 connects fine. You have got the headset on the phone option and not radio, havent you?
Sent from my LT15i using XDA App
IntMD said:
My mw600 connects fine. You have got the headset on the phone option and not radio, havent you?
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
Yeah it is for the phone option...I connected it to a N95 first could that be the reason?? is there a way to reset?
you got to just search in the bluetooth option in settings right??
Still got the problem..
I think the issue is due to the lack of knowledge on how to "pair" the headset with the phone.
@OP, you have to press the power button and hold it until you see two arrows circulating.. then you will be able to pair with the phone.
Try reading the manual for better understanding
prathaban said:
I think the issue is due to the lack of knowledge on how to "pair" the headset with the phone.
@OP, you have to press the power button and hold it until you see two arrows circulating.. then you will be able to pair with the phone.
Try reading the manual for better understanding
Click to expand...
Click to collapse
You are a life saver..
blueblood619 said:
You are a life saver..
Click to expand...
Click to collapse
Oh really . Great to know your issue is fixed.
Hi All,
Since updating my Note to the stock LPY ICS from stock GB, I have found that the bluetooth no longer automatically connects to my Car stereo to use it as a bluetooth headset.
Looking in the settings, the option for automatically connecting seems to have gone!
Has anyone else found similar issues or a fix?
Steve
Hi Steve,
Go to Bluetooth settings and Click on Scan for Devices and Do your Pairing Again.
Please reply if this doesnt work. It worked for me.
prabhu1980 said:
Hi Steve,
Go to Bluetooth settings and Click on Scan for Devices and Do your Pairing Again.
Please reply if this doesnt work. It worked for me.
Click to expand...
Click to collapse
Thanks, I'll give that a go tonight and let you know how it goes!
Yes you have to pair the device's again then you should be golden!
Sent from my GT-N7000 using xda premium
Yep, thanks all - Repiaring the devices worked! I first re-piared it after the upgrade, but then it stopped working but doing it again seems to have fixed it!
Steve
Here the bluetooth disconnects, never pairs automatically (it does manually). Still a bit buggy...