Database Users

[HELP] HD2 stuck on boot screen after HSPL (im not a noob)

hello i just got my HD2 from tmobile (a refurbished one of course) my old htc hd2 screen stoped working idk why, my problem now with this one is that i ran HSPL it had SPL 2.10 i used the HSPL to go on 2.08 everything went well, then i installed energy rom, it flashed everything ok on reboot. it got stuck on the boot screen (NRGZ new boot screen" it stayed der for mintues nothing happend not even the red writing on the bottom came up, i flashed stock rom did the same, after a hard reset it went through after using for 10min it froze! so i flashed stock rom again. HSPL back to 2.10 and phone booted fine didnt freez or anything i rebooted and did the same got stuck ok "stick together" so i cannot install no custom rom, i also did task 29 and tried different radios but no luck... i tryed my old hd2 and flashing went great it went through all the setup and bootscreen...can someone tell me if the HD2 or am i doing something wrong? im returning it for a new to see. please help thanks in advance!!

S3BAZ10 said:
hello i just got my HD2 from tmobile (a refurbished one of course) my old htc hd2 screen stoped working idk why, my problem now with this one is that i ran HSPL it had SPL 2.10 i used the HSPL to go on 2.08 everything went well, then i installed energy rom, it flashed everything ok on reboot. it got stuck on the boot screen (NRGZ new boot screen" it stayed der for mintues nothing happend not even the red writing on the bottom came up, i flashed stock rom did the same, after a hard reset it went through after using for 10min it froze! so i flashed stock rom again. HSPL back to 2.10 and phone booted fine didnt freez or anything i rebooted and did the same got stuck ok "stick together" so i cannot install no custom rom, i also did task 29 and tried different radios but no luck... i tryed my old hd2 and flashing went great it went through all the setup and bootscreen...can someone tell me if the HD2 or am i doing something wrong? im returning it for a new to see. please help thanks in advance!!
Click to expand...
Click to collapse
becuase you got refurbished, did you use that without flashing/upgrading as it comes to you?
there is a possiblity that its already got that problem.

im sorry what do you mean? if i uprgraded the rom when i first got it? no. i got the phone i hspl from 2.10 to 2.08 HSPL everything went good, flashed NRGZs ROM and got stuck on the bootscreen, i tried a few resets until it went through but after 10min the phone shutdown and went back to the boot screen i reverted back all to stock and kept doing the same, are you saying that this will happen also in my next one that arrives? or it was just this one of bad luck that was like this?
thanks so much for your reply and anyone else that helps. thanks.
PS: i think this is my second exchange im not very sure, dont remember. but the old one flashed all perfect

I think it a nand flash issue, may be some sectors thar are being used by the cocked roms is the reason for that freez

task 29 and flash.

SH4YD33 said:
task 29 and flash.
Click to expand...
Click to collapse
will try thanks to all of you, anymore suggestios/tips are accepted =]

SH4YD33 said:
task 29 and flash.
Click to expand...
Click to collapse
will do after task 29 i should put it straight into bootloader right? and flash?

S3BAZ10 said:
will do after task 29 i should put it straight into bootloader right? and flash?
Click to expand...
Click to collapse
once you do task29 at 98% press volume down and you will be in the boot loader mode, then you can flash any ROM ... give it a try

ahmedmph said:
once you do task29 at 98% press volume down and you will be in the boot loader mode, then you can flash any ROM ... give it a try
Click to expand...
Click to collapse
i did im still having the same issue

JackH said:
becuase you got refurbished, did you use that without flashing/upgrading as it comes to you?
there is a possiblity that its already got that problem.
Click to expand...
Click to collapse
i mean to say device could be faulty...
if you get it as replacement from t-mobile,
go ahead flash stock and send back to them for replacement again

JackH said:
i mean to say device could be faulty...
if you get it as replacement from t-mobile,
go ahead flash stock and send back to them for replacement again
Click to expand...
Click to collapse
yes i did, i am gettin the new replacement today, so crossing fingers that this one is 100% working. thank you for your help i really appreciate it =]

[Q] HD2 will not boot. Help needed

I got myself a HD2 the other day, and since i am a androidfan i wanted to get my HD into a droid rom.
This ended in a mobile not wanting to boot, got to the boot screen where i se the android sign and then it reboots. This goes on forever...
HSPL works (have tried different versions) so i can keep trying different roms, but all ends up rebooting the phone. Doesnt matter if i tryWindows 6.5, android or windows7 roms.
But another problem is that i dont know which Rom was my "original" rom, and i formatted the original sd card...
Hope one of you clebver guys have an answer and solution i can try out.
Here are som info that shows in the boot screen now:
R 2.15.50.14
G 15.42.50.50.11U
D 3.14.04666

How did you exactly try go get yourself 'into a Droid ROM'? From SD card or nand? What bootloader do you have? 2.08.Hspl or 2.08.0000? Just go in to Bootloader and flash a custom WinMo ROM or MAGLDR if you want to flash Android from NAND.
Sent from my HTC Vision using XDA App

I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck

LordPalo said:
I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck
Click to expand...
Click to collapse
I've tried several ROMs & each time they boot up wonderfully, whenever i encounter a problem..its usually cuz i either skipped a required step or didnt fully understand how to get that particular ROM working...So my advice 2 u is to follow the dev's instructions properly in order 2 minimize errors...feel free 2 try d build contained in my sig...With normal usage, i still squeeze out @least 30hrs+ out of my device(calls, msgs, wifi, data, sync, really low back-light, apps, games, etc)

Aaaahh!
Found the solution to my problem.
It was one of the battery contacts that was bent out.
Bent it back into place, and now the phone boots like a Dream
Let the android testing begin

I only suggested that to somebody else today and All! Haha.
Sent from my HTC Vision using XDA App

If you want NAND version, you need hspl 2.08, magldr, and cwm in order to flash rom.

Custom roms won't boot.. :/

Basically, the original Leo rom released by Cotulla/DFT works perfectly fine, but as soon as I try other custom roms, none of them will boot. The screen is just stuck at the green HTC logo, this is directly after the main flash of the roms as well. I can't even get to the setup screen for WP7. I've left it there waiting for ages (upto an hour now) for each rom and still the same.
Just curious if anyone else has had this problem? The HSPL, Radio, SD card etc are fine. I've done a task29 as well. I don't have Android installed either. Has me baffled that I can boot the original rom but not others.
Any help would be appreciated! Using MAGLDR 1.3 btw. (I've reflashed it since I used task29 earlier).

TonyCubed said:
Basically, the original Leo rom released by Cotulla/DFT works perfectly fine, but as soon as I try other custom roms, none of them will boot. The screen is just stuck at the green HTC logo, this is directly after the main flash of the roms as well. I can't even get to the setup screen for WP7. I've left it there waiting for ages (upto an hour now) for each rom and still the same.
Just curious if anyone else has had this problem? The HSPL, Radio, SD card etc are fine. I've done a task29 as well. I don't have Android installed either. Has me baffled that I can boot the original rom but not others.
Any help would be appreciated! Using MAGLDR 1.3 btw. (I've reflashed it since I used task29 earlier).
Click to expand...
Click to collapse
We have 1 simple solution
1. Perform task29
2. Flash any WM 6.5 ROM [Cooked ROM will do, stock ROM not necessary]
3. Flash MAGLDR 1.13
4. Flash WP7 ROM
Eureka your phone will have WP7

htcfreak said:
We have 1 simple solution
1. Perform task29
2. Flash any WM 6.5 ROM [Cooked ROM will do, stock ROM not necessary]
3. Flash MAGLDR 1.13
4. Flash WP7 ROM
Eureka your phone will have WP7
Click to expand...
Click to collapse
I've done that though? And as I said, the original LEO Rom from DFT works perfectly fine, it's only custom ones which do this.

TonyCubed said:
I've done that though? And as I said, the original LEO Rom from DFT works perfectly fine, it's only custom ones which do this.
Click to expand...
Click to collapse
I've exactly the same problem. I did everything, wiped and flashed several times, roms...! Any custom rom stucks in boot.
Did you solve the problem?
Anybody an idea what I can do?
thx

Trying to install winmo again but rebooting.

So I tried to install Nandroid on my phone but I realized I needed to put the microsd chip in a card reader in order to upload the nandroid install files on there so I decided to reinstall winmo again.
However I've tried hspl 2.08, hspl 3.08(I think thats the version number) and then reinstalling energy rom with the compatible radios. Once the installation finishes the phone just keeps on rebooting after it shows the numbers on the bottom left of the screen.
Right now I have no idea what to do.

Sorry guys. I figured out that I actually have to shut off my phone and then hold down the volume down button to boot it in to the bootloader and then install the energy rom for it to work correctly.

Check your battery pins to see if one may be bent slightly.
Edit: Just read second second post, so disregaurd my post.

Ok so that was just luck or something.
I got android installed on my device and didn't like that rom so I tried to switch to another one.
1. I went in to magldr and went to AD recovery and just chose the new rom zip and installed it.
2. I didn't like this second rom so I tried to just install another rom using the same method in number 1.
3. The phone just kept on resetting and not booting in to the rom. I used task 29 to wipe out the rom.
4. I installed magldr again and then went in to usb flasher and installed CWM.
5. Phone reboots after CWM install and I go to AD recovery. The phone seems to load CWM. it goes until "go go go" is displayed and then reboots.
6. I tried to install winmo energy rom again but it just keeps rebooting after it shows the energy splash screen.
What can I be doing wrong?

Ok update on what I did so far.
1. I've formatted my SD card thinking it might help but it didn't work.
2. I ran task 29 and installed HSPL 3.03 and installed the stock TMOUS rom and it didn't work. It just got to the splash screen and rebooted.
3. I tried to reinstall energy rom but again it does the same thing as TOMUS rom.

spankerer said:
Ok update on what I did so far.
1. I've formatted my SD card thinking it might help but it didn't work.
2. I ran task 29 and installed HSPL 3.03 and installed the stock TMOUS rom and it didn't work. It just got to the splash screen and rebooted.
3. I tried to reinstall energy rom but again it does the same thing as TOMUS rom.
Click to expand...
Click to collapse
It seems you have done in accordance with the normal procedures
Maybe it was just a bad flashing.
Maybe you want to try flashing Stock ROM but not with HSPL 3.03.
As I know, for Android you need HSPL 2.08.
Cheers...

silverwind said:
It seems you have done in accordance with the normal procedures
Maybe it was just a bad flashing.
Maybe you want to try flashing Stock ROM but not with HSPL 3.03.
As I know, for Android you need HSPL 2.08.
Cheers...
Click to expand...
Click to collapse
Should I flash the stock rom with HSPL 2.08 or just SPL?
edit:
I also forgot to note that the phone only stays on when I plug it in.. I can't unplug it and try to turn the phone on.. it just won't come on.

do task 29 again .... even i had the same prob... install the latest radio thn flash win mob...

hemanbond said:
do task 29 again .... even i had the same prob... install the latest radio thn flash win mob...
Click to expand...
Click to collapse
Damn it.. I tried what you said..
Did task 29, installed latest radio and flashed winmo (energy rom). The damn thing is still restarting.

[Q] Stuck on white HTC screen

i've been using a custom android rom for my EUR hd2.... my phone started to hang then im forced to reboot my phone, now its stuck on the HTC white screen...but after a day it booted until MAGLDR i tried reflashing the custom rom then it freezed the same way....is this a hardware problem or a software problem? i wish i could fix my HD2 it's my only phone >.<

Hi! try to perform a Task29 and to reinstall everything again, maybe it will work...
tell me if it worked, otherwise I'll try to help you again (if I can)

lukes91 said:
Hi! try to perform a Task29 and to reinstall everything again, maybe it will work...
tell me if it worked, otherwise I'll try to help you again (if I can)
Click to expand...
Click to collapse
i tried task29, reinstall radio, hspl, it doesn't seem to work....still stuck at white background green htc logo

malupwet16 said:
i tried task29, reinstall radio, hspl, it doesn't seem to work....still stuck at white background green htc logo
Click to expand...
Click to collapse
last time i performed Task29 I didn't install HSPL again, only radio, bootloader, recovery and rom... i installed radio again because it was doloop's Task29, but there should be a version of Task29 that install radio just after format... maybe try the one you haven't used

lukes91 said:
last time i performed Task29 I didn't install HSPL again, only radio, bootloader, recovery and rom... i installed radio again because it was doloop's Task29, but there should be a version of Task29 that install radio just after format... maybe try the one you haven't used
Click to expand...
Click to collapse
sorry for the late reply, i've already solve the mystery why...it really is a hardware problem, the memory is fried maybe too old or too much heat

sorry for your hd2