The New App Not Only Supports Voltage Control But Allows To Undervolt to -500mv. Now I'm Sure It Won't Handle It. But Its There. I However Prefer SetCpu Over VC Because of the Ui. As Well As Profiles.
http://forum.xda-developers.com/attachment.php?attachmentid=631523&d=1308620121<------------------ Direct Link
http://forum.xda-developers.com/showthread.php?t=505419 <------------- Dev Thread
Sent from my Samsung Epic 4G using XDA Premium App
XxLostSoulxX said:
The New App Not Only Supports Voltage Control But Allows To Undervolt to -500mv. Now I'm Sure It Won't Handle It. But Its There. I However Prefer SetCpu Over VC Because of the Ui. As Well As Profiles.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Could you post a reply on how it work's and act's for you after you try it?
Shoulon said:
Could you post a reply on how it work's and act's for you after you try it?
Click to expand...
Click to collapse
Works well and if you have voltage control as well works fine i had my voltages undervolted and installed SetCpu already detected them and was at that voltage as well as governor and scheduler.
Pretty kewl i havent tried anything below -200mv because the frequencies require a certain amount of voltge to power up and work.
But does have the option to. heres a few pics
XxLostSoulxX said:
Works well and if you have voltage control as well works fine i had my voltages undervolted and installed SetCpu already detected them and was at that voltage as well as governor and scheduler.
Pretty kewl i havent tried anything below -200mv because the frequencies require a certain amount of voltge to power up and work.
But does have the option to. heres a few pics
Click to expand...
Click to collapse
Well It's not the app that manages your cpu. All they do is modify your internal setting's. (same as the RAM tweaks.)
So theoretically it should work. (unless it's not Epic supported) If i'm wrong, some correction would be nice.
Shoulon said:
Well It's not the app that manages your cpu. All they do is modify your internal setting's. (same as the RAM tweaks.)
So theoretically it should work. (unless it's not Epic supported) If i'm wrong, some correction would be nice.
Click to expand...
Click to collapse
Well Yea But Still. It Does It For You & Works For The Epic.
instead of direct linking to the file, you should link to the thread so we can give proper thanks to the Dev and hit up his donate button as well
just sayin'
daddymikey1975 said:
instead of direct linking to the file, you should link to the thread so we can give proper thanks to the Dev and hit up his donate button as well
just sayin'
Click to expand...
Click to collapse
Yes guy let's all go donate.
Sent from my SPH-D700 using XDA Premium App
I'm on srf 1.2. setcpu installs and works fine except when I hit the voltages tab I get a force close. This is with or without voltage control installed
Sent from my SPH-D700 using XDA App
boy143878 said:
I'm on srf 1.2. setcpu installs and works fine except when I hit the voltages tab I get a force close. This is with or without voltage control installed
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Hm, try clearing app data?
Sent from my SPH-D700 using XDA App
This may be a dumb question, but how do you get the voltages tab to appear? Mine doesn't have it. I'm on SFR 1.0.2
Sent from my SPH-D700 using XDA App
daddymikey1975 said:
instead of direct linking to the file, you should link to the thread so we can give proper thanks to the Dev and hit up his donate button as well
just sayin'
Click to expand...
Click to collapse
...or if you want to donate, you can buy the market or amazon app store version which is exactly the same. Pretty damn cool that this developer still offers it for free on XDA.
nerdtaco said:
This may be a dumb question, but how do you get the voltages tab to appear? Mine doesn't have it. I'm on SFR 1.0.2
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Does your kernel support Voltage Control and what kernel are you running and are you on EB13 or EC05
CapsLockKey said:
...or if you want to donate, you can buy the market or amazon app store version which is exactly the same. Pretty damn cool that this developer still offers it for free on XDA.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=505419
boy143878 said:
I'm on srf 1.2. setcpu installs and works fine except when I hit the voltages tab I get a force close. This is with or without voltage control installed
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Same here. Tried it like 2 days ago when it got released and FC when hitting the voltage tab. Never have gotten it to work.
It did say it wont work with EVERY ROM, so that may be the issue. Not sure.
quickstang said:
Same here. Tried it like 2 days ago when it got released and FC when hitting the voltage tab. Never have gotten it to work.
It did say it wont work with EVERY ROM, so that may be the issue. Not sure.
Click to expand...
Click to collapse
Well im on SRF 1.2 With Genocide 1.1 and its working just fine.
battery backup will shorten if i overclock my epic to 1.2GHz?
XxLostSoulxX said:
Well im on SRF 1.2 With Genocide 1.1 and its working just fine.
Click to expand...
Click to collapse
Hmmm...wonder what's making ours do that and not yours? As soon as I hit the voltage tab, bam, FC comes up.
I'm on conservative as well. Not sure if that makes a diff.
I'll do more searching to see what I can find that may be causing this.
XxLostSoulxX said:
Well im on SRF 1.2 With Genocide 1.1 and its working just fine.
Click to expand...
Click to collapse
Same here, working great.
I'm on Twilight 1.1.1 on SRF 1.2 and I get FC when hitting the voltage tab. It sounds like it's a kernel issue, as posted above, Genocide on SRF 1.2 has no issues.
quickstang said:
Hmmm...wonder what's making ours do that and not yours? As soon as I hit the voltage tab, bam, FC comes up.
I'm on conservative as well. Not sure if that makes a diff.
I'll do more searching to see what I can find that may be causing this.
Click to expand...
Click to collapse
Having a governor wont affect that.
nikon120 said:
I'm on Twilight 1.1.1 on SRF 1.2 and I get FC when hitting the voltage tab. It sounds like it's a kernel issue, as posted above, Genocide on SRF 1.2 has no issues.
Click to expand...
Click to collapse
Try genocide and see if the problems still occurs
XxLostSoulxX said:
Having a governor wont affect that.
Try genocide and see if the problems still occurs
Click to expand...
Click to collapse
That was the problem. The other Kernel didn't work.
Problem solved.
Related
Over clock widget
Any one had any good or bad experiances.with.this.app
Sent from my SPH-D700 using XDA App
yea its pretty good if you have a.capable.kernel
yep, that's what I used when I had HTC Hero, worked great, and yes, u gotta have a compatible overclockable kernel.
haven't tried it with Epic yet, its fast enough for me so far.
Does it work with the mixup kernel
Sent from my SPH-D700 using XDA App
epicroot said:
Does it work with the mixup kernel
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It will but it isn't really necessary as the kernel will scale up and down on its own. Running that widget is just one more service occupying memory.
The defaults on MixUp are set to default 1000 Mhz which is same as stock -- You will need SetCPU or overclock in order to boost your speeds to 1200 Mhz. I recommend SetCPU. When I was on hero had bad experience w/ overclock. Never once have I with SetCPU.
Argh! I stand corrected. Thanks for the heads up; I've got setcpu installed now.
Sent from my SPH-D700 using XDA App
This is on a rooted, running bionix 1.9.1 with jacs oc/uv current. With set cpu at 1200/200. Before ryans 2.2 lag fix= 956 after lag fix= 2458. Not to shabby. Lol
Sent from my SGH-T959 using XDA App
GreggoryD502 said:
This is on a rooted, running bionix 1.9.1 with jacs oc/uv current. With set cpu at 1200/200. Before ryans 2.2 lag fix= 956 after lag fix= 2458. Not to shabby. Lol
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Is that what I'm missing!? I'm running the exact same set up and am only running 986 at 1200 cpu... Lol
VibranT Bionix
Evidently bro. Phone is even snappier now. And I had no complaints before!!
Sent from my SGH-T959 using XDA App
Could You Point Me To The Direction Of Installing This? I Don't Know Which One To Do Lol
Is your phone rooted? If not can you access recovery by holding down the up and down volume buttons plus the power button?
Sent from my SGH-T959 using XDA App
If you download ryanza oclf from the market. His imsrtuctions are pretty simple. I wrote them down after reading them in case I needed help. Lol
Sent from my SGH-T959 using XDA App
I tend to find this lagfix not nearly as effective as Voodoo or another fix that actually reformats the system space. My understanding is that RyanZA's lagfix creates a virtual drive on top of RFS, so it looks blazing fast on Quadrant, but in real use you still see lag. Also, it halves the available app space, which I dislike.
Where can I get voodoo for bionix 1.9 FINAL? I didn't flash 1.9 team whiskey with voodoo..
VibranT Bionix
I just rooted an installed Bionix Fusion 1.1 on my friends Vibrant last night, and while trying to apply Voodoo it seemed to be doing it, but doesn't appear to be installed.
When doing the update.zip method, it showed a screen saying something about "Voodoo Lag Fix..... Some weird characters on screen are normal......" then it flashes big blue lettering REBOOT and it restarts. Is that sucessful? How can I check if Voodoo actually applied? I see no difference and the quadrant score actually lowered a tiny bit. Do you HAVE to have setCPU for voodoo to do anything?
I rocked somewhere in the 1900 range with just applying z4mod (stock JI6) - stellar compared to stock.
-bZj
_____
-sent from my Samsung Vibrant via XDApp
GreggoryD502 said:
Evidently bro. Phone is even snappier now. And I had no complaints before!!
Me neither man! I love boot up boot down screens lol I feel like I really have a robot phone now lol
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
VibranT Bionix
theratdude64 said:
I just rooted an installed Bionix Fusion 1.1 on my friends Vibrant last night, and while trying to apply Voodoo it seemed to be doing it, but doesn't appear to be installed.
When doing the update.zip method, it showed a screen saying something about "Voodoo Lag Fix..... Some weird characters on screen are normal......" then it flashes big blue lettering REBOOT and it restarts. Is that sucessful? How can I check if Voodoo actually applied? I see no difference and the quadrant score actually lowered a tiny bit. Do you HAVE to have setCPU for voodoo to do anything?
Click to expand...
Click to collapse
To check if you have voodoo installed:
Download Terminal emulator from the market.
Open it and type "mount"
Look for /dev/block/
If it ends in a 4 then you have voodoo. If it ends in 2, you do not.
cthach11 said:
To check if you have voodoo installed:
Download Terminal emulator from the market.
Open it and type "mount"
Look for /dev/block/
If it ends in a 4 then you have voodoo. If it ends in 2, you do not.
Click to expand...
Click to collapse
+1.
Although I'm lazy and hate typing stuff, so I just run Quadrant. If the score is ~1900, Voodoo is on; if it's ~950, it's off.
Where can I get voodoo for bionix 1.9 FINAL? I didn't flash 1.9 team whiskey with voodoo..
Click to expand...
Click to collapse
In the Dev forum, go to KingKlick's or JAC's kernel threads. I think they both have Voodoo versions of their kernels. I'm using JAC's w/ colorfix and Voodoo. You can just flash it over your current installation.
Is there that much of a difference between voodoo and ryans lag fix??
Sent from my SGH-T959 using XDA App
GreggoryD502 said:
Is there that much of a difference between voodoo and ryans lag fix??
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
In terms of actual use, I think Voodoo is way better. I still saw some lag with Ryan's, but Voodoo is super smooth. Ryan's is a bit of fakery that hugely boosts Quadrant scores but does not do that much for you in real use.
Doesnt the voodoo require a certain size nand chip to work properly?
Sent from my SGH-T959 using XDA App
Just got 2047 with ryanaa oclf on the new quadrant
Sent from my SGH-T959 using XDA App
What rom are you running?
Sent from my SGH-T959 using XDA App
GreggoryD502 said:
Doesnt the voodoo require a certain size nand chip to work properly?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Beta 4 is supposed to work on the early Vibrants with smaller NAND, but people have reported it working on some larger ones as well. You can find instructions in the forums to see which you have.
I think ill stick with ryans for now. My phone is really smooth now. Voodoo may be superior but its bit more complicated to work around. Im not comfortable enough yet to try it.
Sent from my SGH-T959 using XDA App
So it seems like every live wallpaper slows my phone down, bigtime. All animations are VERY choppy and laggy. Seems to happen to other people using the HD2 with Android as well. Any known fix?
dont use the lives, kills batt anyways!
I don't care about battery. I'm always close to a charger.
What build/kernel are you using? Obviously the live wallpaper is going to use more system resources and slow you down a bit as well as use more battery, but it shouldn't be too bad. try overclocking your processor with setcpu that could help. Also, try restarting after applying the wallpaper or killing some background apps that you aren't using to free up memory. I love the live wallpapers too but I prefer speed and performance instead.
Sent from my HTC HD2 using XDA App
tgtoys said:
What build/kernel are you using? Obviously the live wallpaper is going to use more system resources and slow you down a bit as well as use more battery, but it shouldn't be too bad. if you underclocked your processor with setcpu that could be the cause. Also, try restarting after applying the wallpaper or killing some background apps that you aren't using to free up memory. I love the live wallpapers too but I prefer speed and performance instead.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Using the HD2 Nexus build (with the G-Sensor fix). Kernel is 2.6.32.15r8.2.
Even at 1.13GHz with performance governer enabled this happens to me too.
It's not terrible though, the animations just look choppy.
shadiku said:
Even at 1.13GHz with performance governer enabled this happens to me too.
It's not terrible though, the animations just look choppy.
Click to expand...
Click to collapse
Yeah, it's annoying as hell.
See above for my kernel version...I really want to fix this. Seems almost like a video driver issue.
mine are fine with lives on, still smooth as before...must be lucky!
OrionCarl said:
mine are fine with lives on, still smooth as before...must be lucky!
Click to expand...
Click to collapse
Android build? Kernel version? Radio? WinMo ROM?
agentfazexx said:
Using the HD2 Nexus build (with the G-Sensor fix). Kernel is 2.6.32.15r8.2.
Click to expand...
Click to collapse
Try overclocking with setcpu as well as my other suggestions, let us know how it goes, hope it helps!
Sent from my HTC HD2 using XDA App
OrionCarl said:
mine are fine with lives on, still smooth as before...must be lucky!
Click to expand...
Click to collapse
What launcher are you using?
tgtoys said:
Try overclocking with setcpu as well as my other suggestions, let us know how it goes, hope it helps!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I presume setcpu is a Market app?
Come to think of it this could be a stagefright issue. Not 100% familiar with it but i know it has something to do with video playback and chopiness, and there is a way to enable/disable it.
Sent from my HTC HD2 using XDA App
agentfazexx said:
I presume setcpu is a Market app?
Click to expand...
Click to collapse
You can buy it on the market as 'donationware' but you can install it from the APK here.
agentfazexx said:
I presume setcpu is a Market app?
Click to expand...
Click to collapse
Yes in market it's $2.99 or it's free to xda members you just have to find the thread, make sure you read some instructions on it first
Sent from my HTC HD2 using XDA App
tgtoys said:
Come to think of it this could be a stagefright issue. Not 100% familiar with it but i know it has something to do with video playback and chopiness, and there is a way to enable/disable it.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
A what issue? Don't know what 'stagefright' is.
agentfazexx said:
Android build? Kernel version? Radio? WinMo ROM?
Click to expand...
Click to collapse
using vbn win rom 2.12.50.2 radio, to be honest ivew tried so many droid builds i dont know what im using!says 2.2 hd2 android pimped by CMYLXGO,kernal 2.6.32.15r8? sorry dont know more then that!!amazing build, 2 days battery, so smooth and quick!!
Hm, I'm using the HD2 Nexus build with 2.14 Radio.
http://forum.xda-developers.com/showthread.php?t=793924&page=1
That build. That is the MOST stable one I've found so far. The G-Sensor even works perfectly, quite amazing.
Well I got SetCPU installed, but I don't know how to clock it higher than 998MHz...
All animated backgrounds run smooth for me. Kernel is hastarin 8.5.1 and ROM is MDJ Froyo Clean Sense v. 2.3 (old version).
Also, I run my phone at around 600 MhZ and undervolt it more than the default MDJ ROMs. Everything still runs smoothly. So it really should be running 100% smoothly on your phone - if it isn't, something is wrong with your ROM combination.
Does anyone know if this is safe to use on a stock DI18 Epic? (rooted of course)
b3nny said:
Does anyone know if this is safe to use on a stock DI18 Epic? (rooted of course)
Click to expand...
Click to collapse
Yes it worked for me went up till 1200
No you need a custom kernal like phenoix that's the one you want to use for stability and battery life.
Sent from my SPH-D700 using XDA App
Yes it works on stock,i just can't seem to overclock, but it does save on battery.
Sent from my Ass using Angry Birds app.
edr1983 said:
Yes it works on stock,i just can't seem to overclock, but it does save on battery.
Sent from my Ass using Angry Birds app.
Click to expand...
Click to collapse
You need a custom kernel to oc buy you can under clock. Make sure tutu keep it on conservative govnor out you will hasn't issues. Change the min to 200mhz our you will have problems with unlocks.
Next time do a search as this information has been posted many of times
Sent from my SPH-D700 using Tapatalk
Running ComRom 2.1 with OTB 1.6 using default settings and the ED04 radio. Can take a few pics then when I try to exit it locks up and I either wait for it to reboot on its own or three finger press it out to save time. Anyone else having camera issues like this. Just started getting bad the past three weeks or so.
Yes, there are a few people that had that issue. I moved on to CM7 and dont have that problem anymore.
Have you tried changing schedulers in voltage control?
Sent from my SCH-I500 using XDA Premium App
mellen_hed said:
Have you tried changing schedulers in voltage control?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Nope, total noob with that. I figure the default would be the stablest so I kept them there. If you have any settings that work for you please share...and provide as much detail as possible please.
Your best bet is to try a TW PBJ kernel (-50)
found here:
http://forum.xda-developers.com/showthread.php?t=1012571
FDro said:
Your best bet is to try a TW PBJ kernel (-50)
found here:
http://forum.xda-developers.com/showthread.php?t=1012571
Click to expand...
Click to collapse
Was thinking of trying it...I'll give it a shot. Thanks!