Related
The best WiFi/BT tether/hotspot app out there has just added support for the EVO 4G about half an hour ago. Of course, root is required but it's just one click away with unrevoked.
Forget Sprint's $30 a month tether - this one is free and supported by the community.
This is why I love Android.
All info here: Rooted EVO 4G Users Can Now Enjoy Unlimited Free WiFi/Bluetooth Tether (Hotspot) As Android-wifi-tether App Adds Support For EVO
I was just about to post this, but you beat me to it. I'm rockin this right now. Works great!! Not in 4G coverage currently, but I assume that works the same. Thanks to whoever wrote this!!
Sent from my Evo using Tapatalk
Very cool!
I was hoping not to root too quick and start that whole obsession again but...
Yes and y'all will be happy to hear it doesn't appear the evo gets nearly as hot as the hero when running it which is a bigggg plus to me no worries of frying my radio lol
sweet tyvm
SilverStone,
Was your device already rooted or did you use the "unrevoked" apk that was available? Many wrote no success with the "unrevoked" program.
Thanks!
I actually need USB tethering. Does this have it included or do I need another app?
Works great! If only I can figure out this battery issue.
It works like a champ. Wayyy better speeds on 4G.
Doesn't work on toast's rom
jigglywiggly said:
Doesn't work on toast's rom
Click to expand...
Click to collapse
Must be why it won't start on my phone...
chazglenn3 said:
Must be why it won't start on my phone...
Click to expand...
Click to collapse
If it's a separate ROM, it might not work as it relies on a different WiFi driver (one for access point), which is located somewhere in the ROM. If toast's doesn't have it, then it won't work.
Perhaps toast can put the driver back to where it is on the stock ROM and update his ROM.
Yeah.. doesn't work. I've tried.
I can get it to install, SuperUser permissions from Unrevoked run and I allow it etc.. all is well in the "root" department however... It doesn't show upon any wireless radar anywhere.
At least it runs, was on toasts rom and had to wipe and start from scratch to get unrevoked back on. Wouldn't start on Toasts at all.
So anyway, this doesn't actually do any good if you can't see it to connect to it. :/
VoXHTC said:
Yeah.. doesn't work. I've tried.
I can get it to install, SuperUser permissions from Unrevoked run and I allow it etc.. all is well in the "root" department however... It doesn't show upon any wireless radar anywhere.
At least it runs, was on toasts rom and had to wipe and start from scratch to get unrevoked back on. Wouldn't start on Toasts at all.
So anyway, this doesn't actually do any good if you can't see it to connect to it. :/
Click to expand...
Click to collapse
Can you try restarting? If that doesn't help, can you try the method in ticket comment #59?
Archon810 said:
Can you try restarting? If that doesn't help, can you try the method in ticket comment #59?
Click to expand...
Click to collapse
Restarting didn't work.
Tried method #59 and it went smoothly except I'm still not getting it to show up on HTC Hero. I can all the other networks just not my Evo's
I have pre14 installed.
Have wifi tether working fine on a laptop, however.. my samsung moment does not see the evo as an access point anyone test that hotspot actually works or can it only tether 1 device?
attempting this with 4g turned off(not avail in my area yet)
Galiot said:
Have wifi tether working fine on a laptop, however.. my samsung moment does not see the evo as an access point anyone test that hotspot actually works or can it only tether 1 device?
attempting this with 4g turned off(not avail in my area yet)
Click to expand...
Click to collapse
Great question. I has assumed that wifi tether = sprint "hot spot" I did a quick test with two laptops and was not able to connect the second. Not a conclusive test, because it's late and I'm tired. I'll play more tomorrow and post back.
Mine is working on the stock rom (after the OTA) and with the unrevoked .apk installed.....
Like the temp display up there too....nice!!!
Galiot said:
Have wifi tether working fine on a laptop, however.. my samsung moment does not see the evo as an access point anyone test that hotspot actually works or can it only tether 1 device?
attempting this with 4g turned off(not avail in my area yet)
Click to expand...
Click to collapse
Is your moment on 1.5?? I know Android doesn't like Peer-To-Peer connections.
moment is on 2.1, believe its because they dont support the ad-hoc setup.. sprints hotspot is actually turning on a router i believe
The DX bootloader situation sucks... Hope this brightens up someones day...
This was tested on a Motorola Droid X Froyo 2.2(OTA) Rooted
Requirements:
Root(just kidding)
Stock 3G Mobile Hotspot Application
EasySwitch(Trial) by SmartDyne(Download from Market)
1. Download and Setup EasySwitch Widget
2. Fire up 3G Mobile Hotspot and wait for it to fully connect up (30 seconds?)
- If this is your first time running through this, open up your browser and go somewhere. You should get the Verizon Self Provisioning page... If not, you're wasting your money.
3. Now use EasySwitch to cycle the Radio *Off* then back *On* (Top row, 4th from the left... you must do this every time after you fire up 3G Mobile Hotspot)
Voila...
I know this process could be refined some... Who wants to help? #Free4All <- That was an invitation for dialog.
setNetworkPreference(ConnectivityManager.TYPE_MOBILE)
Update 10/9/10 2:55pm PST:
Who has root and more than 5 wireless devices? I only have 4...
/data/misc/wifi/hostapd.conf
max_num_sta = 5 <-- increase this number.
Someone test this...
Was Easywidget one of the stock widgets? This may have been some of the bloat I removed.
I believe the solutions is an app that does the following:
setNetworkPreference(ConnectivityManager.TYPE_MOBI LE)
Click to expand...
Click to collapse
Was that in the buildprop? If so we can just edit it and be done with the process.
Probably could set up tasker to do something like this
Sent from my DROIDX using Tapatalk
or just root the phone and download Wireless Tether for Root Users and be done with it.
lu270bro said:
or just root the phone and download Wireless Tether for Root Users and be done with it.
Click to expand...
Click to collapse
The difference is you get to utilize Infrastructor mode.
lu270bro said:
or just root the phone and download Wireless Tether for Root Users and be done with it.
Click to expand...
Click to collapse
No. Please don't come in a thread acting as if you know everything and have some simple fix with a smart alec response. Wireless Tether is ad-hoc mode, as is Barnacle. This method is access point instead, which some people need specifically as opposed to ad-hoc.
Gimpeh said:
Was that in the buildprop? If so we can just edit it and be done with the process.
Click to expand...
Click to collapse
No, not a build.prop thing, it's an application programming thing... Long story short, 3G Mobile Hotspot switches your phone's data connection from "TYPE_MOBILE" to "TYPE_MOBILE_DUN", which shuts down you your data connection unless you you are subscribed to the 3G Mobile Hotspot service. Cycling 3G off/on in EasySwitch switches your data connection back to TYPE_MOBILE, while keeping 3G Mobile Hotspot open.
drewden123 said:
No. Please don't come in a thread acting as if you know everything and have some simple fix with a smart alec response. Wireless Tether is ad-hoc mode, as is Barnacle. This method is access point instead, which some people need specifically as opposed to ad-hoc.
Click to expand...
Click to collapse
TY... Not to mention 2.2 OTA broke security on both of those apps and made them really flaky... 3GMH has WPA2 and so far seems pretty stable...
I turn off and on my 3G and it shuts down my hot spot.
Wow! Seems like de-railing happens alot around here lately. LOL, so anyway, anyone up for trying to make a tasker profile for this?
Darkness_Invade said:
I turn off and on my 3G and it shuts down my hot spot.
Click to expand...
Click to collapse
Sound like you might have cycled wifi instead. I was however incorrect in saying to toggle 3G, when what I really meant was to toggle *Cell Service* which is 4th from the left on the top row in EasySwitch. If it's still trippin, let me know what mods and such that you're running. I just figured this out earlier today so i don't know all the permutation of why it might *not* work. TY for the feedback.
tekahuna said:
Sound like you might have cycled wifi instead. 3G is 4th from left on the top row in EasySwitch. If it's still trippin, let me know what mods and such that you're running. I just figured this out earlier today so i don't know all the permutation of why it might *not* work. TY for the feedback.
Click to expand...
Click to collapse
3G is actually the Up & Down Arrows on Easy Switch. The Cell tower is just your basic cell service (non 3G), although it IS the one you must toggle.
Just wanted to clear that up.
This works GREAT by the way, thank you very much for posting!
LexusBrian400 said:
3G is actually the Up & Down Arrows on Easy Switch. The Cell tower is just your basic cell service (non 3G), although it IS the one you must toggle.
Just wanted to clear that up.
This works GREAT by the way, thank you very much for posting!
Click to expand...
Click to collapse
Thanks for clarifying that. Changed the OP so people don't get confused. Guess I should have known that, but I'm new Android and Phone modding in general so some of the basic things slip by me..
Glad you found this useful. Your feedback is much appreciated!
Awesome, but is there any way to do this without EasySwitch?
e.g. adb? terminal emulator?
I just don't care much for payware, let alone crippleware. :/
I tried this at work ( vzw hahaha) on my phone the way you stated and also tried with another coworkers x. His browser redirected him to vzw provisioning page as described, mine did not since I used the method described. However I was still able to connect another phone to both mine and a coworkers phone. Makes me worry about being charged the overage rate. Any ideas?
*update*
When connected to an x, fascinate redirected to vzw provisioning page. So this does work. Question is, will my bill sky rocket Haha. Gonna investigate further.
Sent from my DROIDX using XDA App
tekahuna said:
The bootloader situation is sickening... Hope this brightens up someones day...
This was tested on my: DroidX 2.2(OTA) Rooted
Requirements:
Root(actually, probably not)
Stock 3G Mobile Hotspot
EasySwitch(Trial) by SmartDyne(Download from Market)
1. Setup EasySwitch Widget
2. Fire up 3G Mobile Hotspot
- If this is your first time running through this, open up your browser and go somewhere. You should get the Verizon Self Provisioning page... If not, you're wasting your money.
3. Use EasySwitch to Toggle *Cell Service* off/on(The Antenna Tower, Top row fourth from the left... you must do this every time after you fire up 3G Mobile Hotspot)
Voila...
I know this process can be refined some... Who wants to help?
I believe the solutions is an app that does the following:
setNetworkPreference(ConnectivityManager.TYPE_MOBILE)
This method may work on other VZ Android phones with a 3G Mobile Hotspot...
Click to expand...
Click to collapse
if thats the case, why dont we just edit the apk with this option always on and re-sign it again?
AnomynousPierson said:
Awesome, but is there any way to do this without EasySwitch?
e.g. adb? terminal emulator?
I just don't care much for payware, let alone crippleware. :/
Click to expand...
Click to collapse
ATM, I'm have not tested any other apps that are free that can provide the needed functionality. The other apps I saw on the market seemed to just switch between 2G/3G, and not actually cycle the data connection off and on. Flight mode cycles wifi too, so that's a no go. ADB/Terminal... I tried other methods for doing this, pppd up/pppd down... no go..
Again, this works because of VZ tries to switch our data connection from "mobile", to "mobile_dun", to try and ferry us down their pay pipe... Cycling cell service switches us back to a "mobile" connection while keeping the 3G Mobile Hotspot running.
This is a Work In Progress... I believe that a widget could be made to automatically catch when the data connection gets switched over, and hijack it back. I have good idea of API calls in Dalvik necessary to make this happen, but it's been about 10 years since I really got down on programming anything, and my thing was web interfaces with PERL, never really got into Java. I am interested in Android Developement, so I'm currently tinkering with putting this widget together, but I currently don't have the know-how to put it all together. So EasySwitch is kind of my Proof-of-Concept tool.
I feel you, though. EasySwitch is just the current work around. Does the job, though...
newtsevo said:
Makes me worry about being charged the overage rate. Any ideas?
*update*
When connected to an x, fascinate redirected to vzw provisioning page. So this does work. Question is, will my bill sky rocket Haha. Gonna investigate further.
Click to expand...
Click to collapse
This should more or less be equivalent to Barnacle/Wireless Tether. They all just use your "mobile" data connection.
I believe this to be actually more covert than the "Free 3G Mobile Hotspot for Incredible" method, which actually uses VZ's "mobile_dun" pay pipe, and uses the customers "[email protected]" to authenticate.
So, your bill should not skyrocket.
dr154 said:
if thats the case, why dont we just edit the apk with this option always on and re-sign it again?
Click to expand...
Click to collapse
This was another one of the possibilities I had in mind. I don't really understand how to Decompile .APK's. Do you know how to do this? If it is possible to modify the APK, I would actually just bypass the connection switching routine all together, and just move on to starting up the wifi side of things.
<edit>
If you know more about possibly making this work in this way, which actually would be the cleanest method possible, I'd appreciate any kind of help.
</edit>
^^^ This would run into C&D issues, huh? Back to - mobile()
Has anyone noticed that if you try using wifi tether for root, it will enable both wifi tether for root and the built in Verizon wifi tether when you turn it on. Im stuck at work so I haven't been able to test tethering to see if it works or if it sends you to the Verizon sign up page.
Beamed from my MB810
My laptop isn't able to even connect. Im getting the same thing.
P.s. I also notice that the Verizon tether app tells you to sign up at att's website. I thought that was interesting.
Sent from my DROIDX using XDA App
Yeah I remember reading about the at&t mistype on a few of the blogs. Maybe wifi tether for root just needs to be updated for GB.
Beamed from my MB810
siphyn said:
Has anyone noticed that if you try using wifi tether for root, it will enable both wifi tether for root and the built in Verizon wifi tether when you turn it on. Im stuck at work so I haven't been able to test tethering to see if it works or if it sends you to the Verizon sign up page.
Beamed from my MB810
Click to expand...
Click to collapse
I can confirm that Wifi-Tethering works and does not send you to the Verizon sign up page. I'm on the Gingerbread pre-rooted.
That's good to hear. When you turn on free wifi tethering does it also turn on the built in tethering or no? Both icons pop up in my notification bar when I turn it on, I wonder if its just my phone.
Beamed from my MB810
Is there anyone else that can confirm that wireless tether works. Im still having issues. I get sent to the Vzw subscription screen even after cycling airplane mode on and off.
Beamed from my MB810
The 3ghotspot is prepatched and works excellently
Sent from my DROIDX using XDA App
wifi was not working for me, i had the same thing happen as you siphyn
I am having the same problem.
Wireless tether and 3G Hotspot Icons both in the notification bar when I turn on Wireless Tether. When connected to my Xoom and open the browser I get the VZW notification page telling me that it costs $20/month. =/
A solution would be awesome.
If not it looks like I am gonna have to SBF back. Dammit man!!!
I am looking for a good thread on SBFing back, any suggestions?
owenbeals said:
The 3ghotspot is prepatched and works excellently
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Please go into a little more detail.
Turn on 3ghotspot app in appdrawer it works, no vzw paywall in my experience
Beamed from my Gingerbreaded DroidXtreme
hxxp://code.google.com/p/android-wifi-tether/issues/detail?id=915&sort=-id
(sorry for hxxp, not enough posts)
There's an issue on the developer's google code page for Wifi Tether. From the log that's posted, it looks like one of the system calls was changed in gingerbread. (Just an observation from my limited knowledge)
I tried 3g Mobile Hotspot built-in app and my 3G icon just repeatedly disappears. After turning off Hotspot, I still don't have a connection and have to disable/enable radio to get it back or reboot.
chucklesjh said:
There's an issue on the developer's google code page for Wifi Tether. From the log that's posted, it looks like one of the system calls was changed in gingerbread. (Just an observation from my limited knowledge)
Click to expand...
Click to collapse
Please forgive me for my lack of knowledge but could you explain this a little further.
owenbeals said:
Turn on 3ghotspot app in appdrawer it works, no vzw paywall in my experience
Click to expand...
Click to collapse
I may be too cautious in regards to using the stock Hotspot feature, can you confirm that no charges apply?
Brenardo said:
Please forgive me for my lack of knowledge but could you explain this a little further.
Click to expand...
Click to collapse
In the log that's posted on the link I provided you see a lot of this:
Code:
getsockopt for multiport failed strangely: No such file or directory
It makes me think that something was changed in the system that causes it to start 3G Mobile Hotspot when firing up Wifi Tether. A little googling reveals this:
Code:
The getsockopt() function manipulates options associated with a socket.
So I'm guessing the appropriate sockets are not getting created or modified correctly for tethering to function properly and somehow the 3G Mobile Hotspot app is triggered. According to MDW and whatnot, the Hotspot app is supposedly prepatched but 3G drops repeatedly for me, so something is amiss. From what I can tell, 3G Mobile Hotspot is no longer an app even though it shows up in the App Drawer, if you try to remove it by dropping it on the trash on LauncherPro, it tries to remove Settings. It looks like tethering is just built in now.
I mostly understand what you are saying.
But my next question is how long til a functioning tether? Is it even possible since 3G hotspot is now built in?
siphyn said:
Has anyone noticed that if you try using wifi tether for root, it will enable both wifi tether for root and the built in Verizon wifi tether when you turn it on. Im stuck at work so I haven't been able to test tethering to see if it works or if it sends you to the Verizon sign up page.
Beamed from my MB810
Click to expand...
Click to collapse
Brenardo said:
I mostly understand what you are saying.
But my next question is how long til a functioning tether? Is it even possible since 3G hotspot is now built in?
Click to expand...
Click to collapse
I posted a write-up on how I got wifi tethering to work in GB rooted.
http://forum.xda-developers.com/showthread.php?t=1015045
snwagner said:
I posted a write-up on how I got wifi tethering to work in GB rooted.
http://forum.xda-developers.com/showthread.php?t=1015045
Click to expand...
Click to collapse
Does not work for me. 3G cuts in and out. I'd also like to avoid using the official app, worries me too much.
chucklesjh said:
Does not work for me. 3G cuts in and out. I'd also like to avoid using the official app, worries me too much.
Click to expand...
Click to collapse
Really? With all the people who have been using it all this time? LOL, we've had the 3G hotspot app hack since the DX first came out. No 1 has reported issues with VZW catching on.
snwagner said:
Really? With all the people who have been using it all this time? LOL, we've had the 3G hotspot app hack since the DX first came out. No 1 has reported issues with VZW catching on.
Click to expand...
Click to collapse
Well, regardless, it doesn't work for me anyway, even with the patch.
Through a little searching on the Note 4 threads, I found what was working for them, and simply tried it on my Edge.
-Installed the Galaxy Tools app, (not on playstore, see link below) opened app and enabled Native Hotspot.
-Rebooted, configured Native Hotspot, rebooted again.
-Started Native Hotspot, connected to PC. Initial connection took a minute, but it works great. :good:
Check out the link below.
Thanks and donations should go to-----> idone http://forum.xda-developers.com/note-3-sprint/themes-apps/app-one-click-hotspot-enabler-menus-t2816159
*My device is rooted, but this may work without root with the Galaxy Tools app. Sorry- ROOT Required for this method ! But hey, Why wouldn't you root? -Thats not really a question, but some people have "reasons"...
May work on other variants according to the app developer.
Aaaaaaaaaaaaaaaaaaaaaaaand thanks again to you sir! Also donated to idone for a couple of beers. Cheers!
Excellent find but you need to be rooted for this to work. The software is so smart it tells you this when you try! Believe me, I just tried it with an unrooted Edge.
CWGrizzwold said:
Excellent find but you need to be rooted for this to work. The software is so smart it tells you this when you try! Believe me, I just tried it with an unrooted Edge.
Click to expand...
Click to collapse
Thanks, just saw that at the VERY top of the post... So ya root required.
How did you guys get this to work? It doesn't work for me.
Neither Sqlite "add dun" nor the Galaxytools works.
My phone reboots and repprovisions itself and reactivates.
I am rooted.
Works great. A+
ZenInsight said:
How did you guys get this to work? It doesn't work for me.
Neither Sqlite "add dun" nor the Galaxytools works.
My phone reboots and repprovisions itself and reactivates.
I am rooted.
Click to expand...
Click to collapse
Hmmm... I did it last week. I don't recall there being anything special I did other than click on the "Enable Native Hotspot" button and then I clicked on "Add all Notifications Toggles" down below that in order to add the "Mobile hotspot" toggle to the Notification bar drop down.
Let us know.
beejmeister said:
Hmmm... I did it last week. I don't recall there being anything special I did other than click on the "Enable Native Hotspot" button and then I clicked on "Add all Notifications Toggles" down below that in order to add the "Mobile hotspot" toggle to the Notification bar drop down.
Let us know.
Click to expand...
Click to collapse
1. You can't do it if you are in the area of an AirRave
2. You must have "CMDA/LTE" selected in the more mobile networks options. ---Although, once you are done and back in the area you are staying in and don't need a hotspot, choosing CDMA only get's a MUCH better signal.
Then yes, the GalaxyTools app will work.
If you select CDMA only do you still get 4G since you are not selecting LTE?
Next1776 said:
Through a little searching on the Note 4 threads, I found what was working for them, and simply tried it on my Edge.
-Installed the Galaxy Tools app, (not on playstore, see link below) opened app and enabled Native Hotspot.
-Rebooted, configured Native Hotspot, rebooted again.
-Started Native Hotspot, connected to PC. Initial connection took a minute, but it works great. :good:
Check out the link below.
Thanks and donations should go to-----> idone http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159
*My device is rooted, but this may work without root with the Galaxy Tools app. Sorry- ROOT Required for this method ! But hey, Why wouldn't you root? -Thats not really a question, but some people have "reasons"...
May work on other variants according to the app developer.
Click to expand...
Click to collapse
How did you root it. Sprint right?
Sent from my SPH-L720 using JellyBombed Tapatalk 2
primo523 said:
How did you root it. Sprint right?
Sent from my SPH-L720 using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-edge/general/info-galaxy-note-edge-sm-n915-t2945942
you'll need to adjust the method for sprint by getting the sprint chainfire autoroot
it worked fine for me
I for some reason could not get this to work. I read this thread and the other and still cant figure out why. After i select enable and reboot, when i go to turn on the tether it gives me the nag and i lose data signal and then it shuts down. I am rooted and i had cdma selected in the main menus. Any ideas?
Thanks,
Billy
Sent from my SM-N915P using XDA Free mobile app
joedirt2346 said:
I for some reason could not get this to work. I read this thread and the other and still cant figure out why. After i select enable and reboot, when i go to turn on the tether it gives me the nag and i lose data signal and then it shuts down. I am rooted and i had cdma selected in the main menus. Any ideas?
Thanks,
Billy
Sent from my SM-N915P using XDA Free mobile app
Click to expand...
Click to collapse
so:
1. placed files on micro sd
2. flashed twrp via odin?
3. flashed files via twrp?
4. enabled root?
5. grabbed galaxy tools from the play store?
6. enjoying freeness?
Did 1-4, root confirmed with supersu and titanium backup and a few other apps that require root. Got galaxytools from the above note4 thread. Tried both methods in gtools app. Both ended up with same result. No tether. Tried both with cdma only selected in settings. Both resulted in tether starting, then immediately lose data signal, then nag about not having the tether plan, then tether closing.
Billy
Sent from my SM-N915P using XDA Free mobile app
joedirt2346 said:
Did 1-4, root confirmed with supersu and titanium backup and a few other apps that require root. Got galaxytools from the above note4 thread. Tried both methods in gtools app. Both ended up with same result. No tether. Tried both with cdma only selected in settings. Both resulted in tether starting, then immediately lose data signal, then nag about not having the tether plan, then tether closing.
Billy
Sent from my SM-N915P using XDA Free mobile app
Click to expand...
Click to collapse
i'm not sure whats going on then. I'd rather say, " i don't know" than start making stuff up and wasting your time.
hold on. someone will chime in.
Talked to the dev about this
joedirt2346 said:
Did 1-4, root confirmed with supersu and titanium backup and a few other apps that require root. Got galaxytools from the above note4 thread. Tried both methods in gtools app. Both ended up with same result. No tether. Tried both with cdma only selected in settings. Both resulted in tether starting, then immediately lose data signal, then nag about not having the tether plan, then tether closing.
Billy
Sent from my SM-N915P using XDA Free mobile app
Click to expand...
Click to collapse
Ok two questions are you doing a Profile update after you run the program? If so you are rewriting the modification and that will remove the ability to use the tether hence the statement that you don't have a data plan with tether message.
2nd Do you have a Airrave? If so you CANT USE the tether with that running, also if your towers are not running well in your area you will see the lost data connection at times, simply turn the tether on again or your local towers don't have the capacity to use the tether at this time. Which leads to the question have you used it anywhere else other then where you have tried to use it now? (i.e in a location with better towers)
cvaria said:
http://forum.xda-developers.com/note-edge/general/info-galaxy-note-edge-sm-n915-t2945942
you'll need to adjust the method for sprint by getting the sprint chainfire autoroot
it worked fine for me
Click to expand...
Click to collapse
looks like the sprint version is Not working dated 11/26 ?? Did you go the tmobile route? Can you explain which route you went to Root the sprint version?
I initially tried the spring method and when it didnt work i ended up flashing the tmobile version. Im guessing this tether thing doesnt work because of the towers around here. Although the sprint coverage map doesnt show it working here, i do get the spark icon at the top. I hadnt been updating profile or any of that other stuff, it just doesnt work even in cdma only. Im sure somebody will make a rom soon that will get tethering working
Thanks
Billy
Sent from my SM-N915P using XDA Free mobile app
Went the T-Mobile after failing the sprint version, got her rooted and hot spot enabled =) using the method in this thread
I followed the tmo method but subbed the chainfire sprint root package. Somethong you are doing isnt right. Im not sut what it is but its off.
If anyone knows a workaround please share. The Note 7 had a glitch when using WiFi sharing for HotSpot to work. I hope one of you smart people find a way. I need it for work.....Only reason I root is for battery life and hotspot......Man I hope we get root or HotSpot working. Thanks !!!! Never had an LG before and this thing is a beast !
LuckyColdJohnson said:
If anyone knows a workaround please share. The Note 7 had a glitch when using WiFi sharing for HotSpot to work. I hope one of you smart people find a way. I need it for work.....Only reason I root is for battery life and hotspot......Man I hope we get root or HotSpot working. Thanks !!!! Never had an LG before and this thing is a beast !
Click to expand...
Click to collapse
Do you have issues with the V20? Do you have tethering in your mobile plan? Are you using it on AT&T?
LuckyColdJohnson said:
If anyone knows a workaround please share. The Note 7 had a glitch when using WiFi sharing for HotSpot to work. I hope one of you smart people find a way. I need it for work.....Only reason I root is for battery life and hotspot......Man I hope we get root or HotSpot working. Thanks !!!! Never had an LG before and this thing is a beast !
Click to expand...
Click to collapse
Is yours an AT&T version? If so you'll have to have to have it part of your plan.
Sent from my LG-H918 using Tapatalk
haris163 said:
Do you have issues with the V20? Do you have tethering in your mobile plan? Are you using it on AT&T?
Click to expand...
Click to collapse
No issues with the V20 at all...Best phone I've ever had. I'm on At&t unlimited.
Pick_A_Name said:
Is yours an AT&T version? If so you'll have to have to have it part of your plan.
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
Yes At&t......I will need root then because I'm unlimited data....This sucks......If I want to use my data by tethering, I should be able too. This is dumb
In the same boat with Verizon on unlimited. Foxfi works, but only via USB (cable connected) or Bluetooth (slow ~1 Mbps). I love this phone, but miss being able to use the Hotspot for the rare times I need it.
I believe there is a beta feature on the pdanet USB client on the PC side that will allow a hotspot generated from the computer attached via USB. Clunky but better than nothing if you have other devices that need access to the connection in a stationary setting for now.
Sent from my LG-H910 using Tapatalk
LuckyColdJohnson said:
Yes At&t......I will need root then because I'm unlimited data....This sucks......If I want to use my data by tethering, I should be able too. This is dumb
Click to expand...
Click to collapse
And this is why carriers are requesting phones to be locked down harder than Fort Knox
Sent from my LG-H830 using Tapatalk
Its already a lot of money, why not just let us have that? Stupid imho\
Thanks for the help ..WIll use FoxFi / PDA USB with cable for now. Good looking out!!
I'm really looking forward to a solution for this. I've been holding on to my old S5 since I haven't been able to find a newer removable-battery phone that allows for rooted hotspot usage on the old grandfathered unlimited plan :/
Now that we have root, I wonder how we can enable this?
I use to just change a couple of numbers in buildProp on other phones (Rom Toolbox .prop)
Any help would be appreciated
EDIT:
Found the below info but I don't think it will work. I DID NOT try this but it is tempting.
4. Connect your phone to your PC and issue the below commands:
adb shell
echo "net.tethering.noprovisioning=true" >> /system/build.prop
adb reboot
5. Now, install Terminal Emulator app from the Play Store [HERE] and launch it.
6. In Terminal Emulator, enter below code one by one:
su
settings put global tether_dun_required 0
exit
Source was found here >> CLICK ME
LuckyColdJohnson said:
Now that we have root, I wonder how we can enable this?
I use to just change a couple of numbers in buildProp on other phones (Rom Toolbox .prop)
Any help would be appreciated
Click to expand...
Click to collapse
Yeah I'm not entirely sure how we might be able to get it to work. I've tried adding dun to the APN - edited the build.prop and added the lines you put above into the build.prop file. Those worked to no avail.
I edited the line inside build.prop "ro.build.target_operator=ATT". I changed ATT to "OPEN", and that did happen to allow tethering. But from the devices I connected to my phone - they were unable to connect to the internet. It was almost like ATT was blocking service of tethering. I didn't try to do all of those edits at the same time though. Perhaps maybe then?
Twisted
twistedvip said:
Yeah I'm not entirely sure how we might be able to get it to work. I've tried adding dun to the APN - edited the build.prop and added the lines you put above into the build.prop file. Those worked to no avail.
I edited the line inside build.prop "ro.build.target_operator=ATT". I changed ATT to "OPEN", and that did happen to allow tethering. But from the devices I connected to my phone - they were unable to connect to the internet. It was almost like ATT was blocking service of tethering. I didn't try to do all of those edits at the same time though. Perhaps maybe then?
Twisted
Click to expand...
Click to collapse
I remember rebooting afterwords before things would work ...JS...
Thanks for trying !!! Keep us posted please
LuckyColdJohnson said:
I remember rebooting afterwords before things would work ...JS...
Thanks for trying !!! Keep us posted please
Click to expand...
Click to collapse
Yeah I tried using all three of those methods - but it seems like only the method of turning the ro.build.target_operator to OPEN avoids the "Authorizing" screen and lets the Tethering turn on. But while the phone is still able to access the internet, the other devices cannot access the internet - having DNS issues.
I'm curious if perhaps the "system/app/Entitlementcheck-" app retrieves a token to allow other devices to connect, and using "OPEN" makes it so the entitlementcheck application is not even used. Not sure entirely how it works. I've seen in other device sections, such as the Pixel, where someone edited the phone's own entitlementcheck app equivalent to let them use tethering (here). Not sure if it would be possible to something similar here.
Twisted
twistedvip said:
Yeah I tried using all three of those methods - but it seems like only the method of turning the ro.build.target_operator to OPEN avoids the "Authorizing" screen and lets the Tethering turn on. But while the phone is still able to access the internet, the other devices cannot access the internet - having DNS issues.
I'm curious if perhaps the "system/app/Entitlementcheck-" app retrieves a token to allow other devices to connect, and using "OPEN" makes it so the entitlementcheck application is not even used. Not sure entirely how it works. I've seen in other device sections, such as the Pixel, where someone edited the phone's own entitlementcheck app equivalent to let them use tethering (here). Not sure if it would be possible to something similar here.
Twisted
Click to expand...
Click to collapse
Wow...Sounds a little harder than it use to be. Nice digging man, sounds like your on the right trail that's for sure. I'm also sure with time someone (or you) might figure something out. Until then, I'm using PDAnet with cord. Better than nothing for the office PC
twistedvip said:
Yeah I'm not entirely sure how we might be able to get it to work. I've tried adding dun to the APN - edited the build.prop and added the lines you put above into the build.prop file. Those worked to no avail.
I edited the line inside build.prop "ro.build.target_operator=ATT". I changed ATT to "OPEN", and that did happen to allow tethering. But from the devices I connected to my phone - they were unable to connect to the internet. It was almost like ATT was blocking service of tethering. I didn't try to do all of those edits at the same time though. Perhaps maybe then?
Twisted
Click to expand...
Click to collapse
I have the US996 unlocked version my build.prop ro.build.target_operator=NAO I have hotspot so i decided to change it to ATT because im using att i wanted the att signal icon I did get the att signal icon however i noticed my tethering option was gone so i changed it back to NAO instead of ATT
I am on sprint. And i rooted my v20 phone. I am on unlimited also. But sprint gives me 5gb tether for free on my plan. Then they slow you down. The built in tether did not work after root. So i had bought a app called Wi-Fi tether router. And it works.
Re: Work around
Were you able to find a way to root the LG V20 or find a way to get around the tethering and hotspot block/ authorization??? Please Help !! I have no idea how to root but I heard there is a minor root I can do but not sure how to do it and DEF dont want to mess my phone up.... Any help or suggestions would be greatly appreciated!!
---------- Post added at 05:34 AM ---------- Previous post was at 05:26 AM ----------
LuckyColdJohnson said:
Wow...Sounds a little harder than it use to be. Nice digging man, sounds like your on the right trail that's for sure. I'm also sure with time someone (or you) might figure something out. Until then, I'm using PDAnet with cord. Better than nothing for the office PC
Click to expand...
Click to collapse
Can you PLEASE help me with how to tether with my laptop??
I dont have a way to download pdanet to my laptop because I have no WiFi so is there a way to tether my LG V20 to my Lenovo Laptop with only the Pdanet app on my phone???
I have tried Everything and I can't get tethering or hotspot so any help or suggestions would be Greatly Appreciated!! I used to be able to get it by changing my APN on my LG G4 but now that I have the V20, I have NOTHING... Im on crickets unlimited plan using an AT&T LG V20..........
lingo2012 said:
I have the US996 unlocked version my build.prop ro.build.target_operator=NAO I have hotspot so i decided to change it to ATT because im using att i wanted the att signal icon I did get the att signal icon however i noticed my tethering option was gone so i changed it back to NAO instead of ATT
Click to expand...
Click to collapse
I just did this and you solved one of my pet peeves but not my tethering issues.
The phones still connect to my phone however they have no internet while tethering.
What you did solve is (by changing the prop to NAO vs ATT) is removing the annoying carrier name on the left side of the screen and also removed the annoyingly large ATNT 4G symbol. Instead its a neatly placed, small 4glte icon.
This issue is still persisting even after changing the tether enforcement to 0 from 5 in the system xml