Database Users

USB connectivity issues

No computer detects my TyTN anymore. Not even to display the "New Hardware Found" message that I usually get when plugging the TyTN into a USB port of a computer that hasn't seen the device before. Nothing. The phone still charges and the it still knows when its plugged by the icon on the lower right corner of the screen.
I've searched the forum for this very issue, and found mostly activesync issues/solutions. I've tried them all with no success. BTW activesync works for me via bluetooth. My last resort was a hard reset. Three times... (read from one of the posts). Now I'm stuck with a TyTN with a Dopod ROM.
Has anyone experienced this problem?
I tell you, having a kick-ass phone but without a way to push the customization files into it is TORTURE.
Please help.

I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.

jford04 said:
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
Click to expand...
Click to collapse
Thanks for the reply. I use ActiveSync 4.5 on Win2K, XP and XPMCE. The computers are not able to detect it at all.

Reinstall Activesync
Try reinstalling Activesync (which will uninstall the earlier install of the same or earlier version). This worked for me. I face this problem once too often coz I sync with my desktop and laptop.

try deleting the partnership on the phone and then try plugging it in, make sure all the partnerships on the phone are deleted, i had the same issue with my tytn and that solved it.
Another issue i had was that windows was detecting the device but still would not allow it to connect , so what i did there was just go into computer management (right click on my computer then click manage) and uninstall the device while it was connected then unplug and plug it back in and windows re-detected it. Also make sure you have the atest version of active sync installed.
Hope this helps

Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...

And reality sinks in...
yrreP said:
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
Click to expand...
Click to collapse
Yeah, I think the USB port on my TyTN is partially dead. This feels like being with Verizon and their locked phones. Sucks wet cow butt.
Oh well, I'll just learn to live with my Dopodish phone until HTC comes out with TyTN III.
Thank you all who replied.

USB Error

When I plug my Touch HD in to my PC by USB i get the following message "Warning, The device doesn't support the USB head set, please remove it"
Any ideas?

if it's the pc i would suspect that it's an usb driver issue
or a 3th party program giving the msg
i would try another computer to verify this

seems to be doing it on all computers.
The computer finds the phone for a few seconds then i get the error message and the phone dissappears from the explorer.
The phone still charges though
I have 2 touch hd's and its only happening with the one.
Is this an issue anyone else has encountered? Could the USB port be damaged? If so where can I get it repaired and how much am I looking at?

Cant connect hd2 to computer!!

this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated

Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?

i know this may seem a bit "it helpdesk-ish" but try re-booting your PC

Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing

djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it

Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.

johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?

k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.

Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.

This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.

bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.

this is one of the many WM6.5 errors!
need Android soon!

Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....

as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated

@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!

angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol

"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.

Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.

Not the usual PC connection issue

Hi!
Ive got a big problem cause my Galaxy S just stopped being recognized by any PC. I dont know whats wrong, it just treats USB cable like it was a charger, PC doesnt detect anything neither does the phone. Its very strange since everything worked perfect for the last couple of weeks. I tried to connect it to a notebook i used to flash the phone a week ago and it has been turned off ever since so it cant be any driver related issue. Im afraid my micro-USB port is damaged but i have a custom firmware in it and since i cant reflash it the warranty isnt vaild ehh...
Any ideas?
THX

silly question...
Do you mount the phone via the status bar after you plug it in?

Thats the point - PC doesnt detect the phone AT ALL theres not even a sound that an USB device has been plugged in. The same thing in the phone it just starts charing it doesnt seem to know that its connnected to PC.

sounds like your PC mobo got the USB port fried.
try turning off the PC, unplug the power cord, wait for the energy to drain out, then turning it back on
my Windows 7 x64 some time does that, but it's not a hardware error
on yours it could either be a hardware dead, or the Windows gone Bezerk as usual

I tried different USB devices - other phones, pendrives and a printer and everything works fine except for the Galaxy S. The Samsungs USB cable also works fine with other phones..
I wrote to Samsung and they said to send them the device because its most probably damaged :\ Will they check the firmware version?
btw. as I said in the first post the phone doesnt work on my notebook as well
I wouldnt care so much about this because I can send files using ftp but I cant change the firmware without an USB port working (or am I wrong?)

I sometimes also have this problem. For me rebooting the phone and if it then doesn't work again using another USB port at my PC solves the problem.

Yesterday when the problem occurred for the first time I removed SIM and microSD cards and PC detected a device but it was recognized as 'unknown malfunctioning USB device' but no luck ever since.

Just to let you know my Samsung just fixed itself 0_o Might have something to do with the Windows reinstallation on my PC but it suddely works on my notebook as well. Im really confused now...

USB not recognized

When I plug my phone into my usb port I keep getting an error message
That says
USB device not recognized
one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. For assistance in solving this problem, click this message.
So when I do that it says unknown. I know I have the drivers installed because I can odin back to stock. I am thinking this is the reason why wired tether will not work.
Can anyone let me know what the problem may be?
Thanks.

This has happened to me from time to time. A reboot of the pc and phone has always fixed it.

I just realized I have never used this cable with the phone. I got it at walmart and it is made by fuse. So it could be the cable.

Also try a different usb port. Mine got error error messages on some ports but not the other on the same computer.

I bought several usb cables for cheap online. 1 totally stopped working, and another one disconnects the phone is I move the cable.
I always suspect the cable!

I am having the same problem with my laptop atm...
My computer can't seem to see the epic when it's in d/l mode. I've installed the samsung drivers as well...but no go.
Hopefully someone has a suggestion to fix the problem. I'll be seaching the forums in the meantime.

had the same problem try a different usb port aslo dont use usb multi hubs.

I have the same problems as well.
A reboot fixes nothing.
None of my ports work.
I do not want to replace my epic but this simple issue is nerve wrecking.

I have a similar problem. Both my wife and I have the epic. I have no issues connecting my phone to either of our computers but when I connect my wife's epic neither of the computer's see the phone at all (not even as an unrecognized device). The phone asks if I want to mount the sd card and I say yes and nothing happens. I've tried usb debugging and I can't get Odin to work either for hers (fine for mine). Has anyone else had this issue?
Thanks