Help inputing MMS info. - Wildfire General

Okay, so it took me some time to figure out that I had no MMS info under APNs.
But when I tried entering them today there were so many options under new APN I got lost
So, could anyone tell me where to enter these:
1. Profile name: TUS MMS
2. MMSC http://mms.tusmobil.si:8002
3. Connection Type HTTP
4. Proxy settings
Server IP proxy 91.185.221.85
Server Port proxy 8080
5. Data Account TUS MMS
Tried my best at translating them

Profile Name - TUS MMS
APN - TUS MMS
Proxy - 91.185.221.82
Port - 8080
Username - Blank
Password - Blank
Server - Blank
MMSC - http://mms.tusmobil.si:8002
MCC - Default
MNC - Default
Authentication Type - Default / Not Set
APN Type - mms
Protocol - IPv4
If it doesn't work, then, remove the Proxy Settings and add them to MMS Proxy and MMS Port. Hope it helps.

Related

mms messaging

Hi MamaKin
here are the MMS setting for O2 UK PAYG
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempes before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
sorry i was in hurry before
ok yeah as in my setting
HTTP: 193.113.200.195 PORT : 8080
WAP: 193.113.200.195 PORT: 9201
SecureWAP : EMPTY
Socks: 193.113.200.195 PORT: 1080
Type : Socks 4 setected
and the rest is same as explained before
hope this will help
Regards
Gugi
Hi; I've been trying to set up MMS messaging as these instructions, but I can't seem to access the set up
If I go to MMS Composer (Is that the same as 'Messaging'? because I don'#t seem to have 'messaging anywhere); and go to tools, I get Options and then the screen is not really as described above. and if I go to the 'Servers' bit, the gateway is correct but there isn't anywhere to put the Port number.
I'm really very new to this sort of thing, but if anyone can help me I'd be very grateful; Any thoughts on how to set up the MMS?
Btw; I set up the internet access using instructions Smithy posted in July, and that works, so thanks very much indeed.
try doing a search in the forum for the latest MMS Composer

Issue sending and receiving MMS messages

Hey everyone!
Tearing out my hair with this one! No probs with GPRS or browsing the Web, using push email functions etc.
BUT MMS just wont work! Am on O2 and using the following settings found under the MMS Configuration menu:
Server: O2UK
Gateway: 193.113.200.195
Port: 8080
Server Address: http://mmsc.mms.o2.co.uk:8002
Connect Via: My Work Network (the default i use for browsing the web, etc)
Sending Size: 100k
Wap Version: 2.0
Have checked with O2 that MMS is enabled on the sim and it is (have checked with them twice now).
When i go to send a MMS messsage, it says sending but then comes back and says one of 2 things, either:
User Barred
Or
Cannot send message will remain in Outbox
GPRS seems to activate when i hit the send button. I have even tried connecting to the web first. any ideas? going mad!
It won't recieve whatsoever it will just have a text message saying "youve been sent a text message log on to o2.co.uk to view".
My wizard is a O2 XDA Mini - S, Rom is an Imate K-Jam ver 2.16.9.1 WWE dated 2/6/06
Hope you can help!
The normal O2 settings have two connections, one for general browsing(My ISP) and one for wap(My Work Network). MMS uses the 2nd.
sorry Kevino, not sure what you mean?
Under settings->Connections->Connections. O2 adds a connection under each of "My ISP" and "My Work Network".
Sorry I do not have the wap connection detail as I deleted it. Try a search for "O2 GPRS settings" and when you find a list you will see what I mean.
These are the only settings i can find, do you mean that MMS should be sent by dialup connection kevino?
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
These are the onle settings i can find, do you mean that MMS should be sent by dialup connection kevino?
These are the only settings i can find, do you mean that MMS should be sent by dialup connection kevino?
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
These are the onle settings i can find, do you mean that MMS should be sent by dialup connection kevino?
I think i may have found the problem guys! I'll keep you updated.....
I kept getting a message saying "Error - User Barred" everytime i was sending MMS. Found a site where a few guys had the same problem and found out the solution.
Basically have to call O2 and ask them to confirm with their Data Services team that MMS is enabled on all their systems as opposed to just the primary system. Replication seems to be an issue they suffer from.
Original article: http://www.esato.com/archive/t.php/t-50035
Will keep you posted they have had to replicate it manually and it may take up to Friday!
Wish me luck
Well I hope that's your problem. But look at
http://forum.xda-developers.com/viewtopic.php?t=50477&highlight=o2+gprs+settings
to see what I was trying to explain. Ah just noticed it appears different for payg (you do not say what you have)
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=

NZ 2 degrees mobile internet

I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 118.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................
oh very useful thank you very much
i used 2degree too with HTC Desire
try that
I'm using two degrees in nz and the olly settings are:
in connection type use "cellular line 3G"
for the access point "internet"
QUOTE=Karearea;4795184]I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 1i18.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................[/QUOTE]
no doubt you have solved this problem already but for anyone who hasn't, 2degrees website is very helpful and there is a section were you write in your phone number and some other details and they send you a bunch of txt msgs containing updates and settings changes that will fix the 3g problems.

Help with O2 UK APN settings

Ok these are the only 2 APN's I have setup. I can connect to the internet fine but MMS don't work.
WEB SETTINGS
Name:O2 Mobile Web
APN:mobile.o2.co.uk
Proxy:<not set>
Port:<not set>
UserName2web
Passwordassword
Server:<not set>
MMSC:<not set>
MMS proxy:<not set>
MMS port:<not set>
MMS protocol:WAP 2.0
MCC:234
MNC:10
Authentication type:<not set>
APN type:default <----- have tried <not set> as well
MMS SETTINGS
Name2 pay monthly
APN:wap.02.co.uk
Proxy:193.113.200.195
Port:8080
Username2wap
Passwordassword
Server:<not set>
MMSC:http://mmsc.mms.o2.co.uk:8002
MMS proxy:193.113.200.195
MMS port:8080
MMS protocol:WAP 2.0
MCC:234
MNC:10
Authentication type:<not set>
APN type:MMS <----- have tried <not set> as well
I currently have a picture message in my inbox which says downloading even when I reboot but nothing is happening. Any ideas?
have you tried using the iPhone apns for it i have a hd2 and use em... worms a treat
and where do you find these?
ok after searching online I found a post with the settings for iphone android APN and the only difference I see is the username and password. Tried it and still don't work.
Have you managed to sort this yet, Im having the same issue, tried loads of apn settings to no avail
No still haven't got it working. I can use 3g fine just not MMS
There is a free program on the android market called APN Backup & Restore. It would be nice if someone with working O2 MMS settings could back up the APN settings and put the file on here.
Hey, in case you never got your MMS to work, I have just found these settings and they've worked for me, finally, after weeks of trawling :-
Name: O2 UK MMS
APN: wap.o2.co.uk
Proxy: http://wap.o2.co.uk
Port: 9201
Username: o2wap
Password: password
Server: http://mmsc.mms.o2.co.uk:8002
MMSC: http://mmsc.mms.o2.co.uk:8002
MMS proxy: 193.113.200.195
MMS port: 8080
MCC: 234
MNC: 10
Authentication Type: None
APN type: mms
don't work for me
I'm on O2 simplicity and Mattc's 1.5 rom
I have just managed to get this working on my phone. I copied the settings from a colleague who just got a dell streak on o2. After completing the following steps everything started working shortly afterwards.
1. Delete all APNs
2. Enter the following 3 APNs.. (any fields not mentioned leave on the default/blank setting)
Name: mobile.o2.co.uk
APN: mobile.o2.co.uk
username: o2web
password: password
mmc: 234
mnc: 10
apn type: default,supl
Name: Post Pay Data
APN: wap.o2.co.uk
Proxy: 193.113.200.195
Port: 8080
username: o2wap
password: password
server: h t t p : //wap.o2.co.uk (remove excess spaces)
mcc: 234
mnc: 10
apn type: default
Name: Post Pay MMS
APN: wap.o2.co.uk
username: o2web
password: password
mmsc: h t t p : //mmsc.mms.o2.co.uk:8002 (remove excess spaces)
mms proxy: 193.113.200.195
mms port: 8080
mcc: 234
mnc: 10
apn type: mms
3. Set the green dot to mobile.o2.co.uk
opius,
with those settings im getting a different error notification. Before it was Network error/failure. Now I get "Transient failure"
Gaz25 said:
opius,
with those settings im getting a different error notification. Before it was Network error/failure. Now I get "Transient failure"
Click to expand...
Click to collapse
Hmm yeah these settings seem to have stopped working on my phone now .
After first entering them all the failed messages I had queued up started going through. But I just tried sending another one and am getting "Generic network failure" again.
It seems to sometimes send them OK and other times keep failing.
I just tried copying the settings over from my colleagues Dell Streak using APN Backup & Restore. Still not working properly. Those settings are working fine on the streak. I wonder if the problem could be somewhere else..
I am starting to wonder if this could be an issue with the o2 network itself?
Last night at around midnight I was able to send/receive a MMS with no problems both went through very quickly. This morning I try again and I jsut get "Generic Network Failure"
Guess I need to try on a WM build to verify whether is is o2 or an android issue.
I switched back to WM for a bit. Just tried it as you put the post and my MMS in WM works fine.
If anyone stumbles across this post looking for Dell Streak APN settings on O2 just text ...
ACTIVE
to 2020 and O2 will send you the settings via sms
bobjbain said:
Hey, in case you never got your MMS to work, I have just found these settings and they've worked for me, finally, after weeks of trawling :-
Name: O2 UK MMS
APN: wap.o2.co.uk
Proxy: http://wap.o2.co.uk
Port: 9201
Username: o2wap
Password: password
Server: http://mmsc.mms.o2.co.uk:8002
MMSC: http://mmsc.mms.o2.co.uk:8002
MMS proxy: 193.113.200.195
MMS port: 8080
MCC: 234
MNC: 10
Authentication Type: None
APN type: mms
Click to expand...
Click to collapse
I used these settings and did not work for me until I changed APN type to "not set" and now works just fine.
PLaCiDSHaDoW said:
If anyone stumbles across this post looking for Dell Streak APN settings on O2 just text ...
ACTIVE
to 2020 and O2 will send you the settings via sms
Click to expand...
Click to collapse
I tried this and did not recive anything. Also read on O2 forum that carrier does not support Nexus One, so they cant send you mms settings.
EDIT:
I removed two apn settings and left O2 UK (mobile data) and O2 UK MMS (wap.o2.co.uk), dont know if anything is related to this but give it a try
Anyone able to help with this one? MMS not working since I flashed to 2.2.1. All APN settings default from sim card though.....
Sent from my GT-I9000 using XDA App
Fixed this by selecting UK CSC setting for UK (XEU) as I had flashed with a multu CSC firmware. Lost all my old SMS though!
Sent from my GT-I9000 using XDA App
is there a definative answer yet as I cant seem to get any of the suggested settings working
optiknerv said:
is there a definative answer yet as I cant seem to get any of the suggested settings working
Click to expand...
Click to collapse
the main bug i have with android and o2 is that the apn setup loads too many apns by default. Its made more confusing because o2 is one of those networks that needs different settings for data and mms. some use combined servers and such.
When i flash android i get the following apns configured
giffgaff
o2 uk
o2 uk
o2 uk postpay mms
o2 uk prepay mms
tesco
giffgaff *
o2 mms postpay *
o2 mms prepay *
o2 uk mms *
the * ones are mms only apns, so dont have a radio toggle button on the right hand side.
The problem i think is that some accounts are set for data and mms, and others just for data, and some for just mms so i suspect they interfere. (my guess is the two 'o2 uk postpay mms' & 'o2 uk prepay mms' ones, because they are set to be used for data and mms, and ive tested them and they dont work... or the contract one doesnt anyway)
Im on O2 contract, and what i do is delete all apns except
the first 'O2 UK' (with the radio button, and username o2web)
and
'o2 MMS postpay' (without the radio button)
delete everything else, then reboot. mms settings sometimes dont seem to change till reboot, but data apn settings changes do seem to take immediately.
settings for 'o2 uk'
Name 'O2 UK' (anything)
APN 'mobile.o2.co.uk'
Proxy 'not set'
Port 'not set'
Username 'O2Web'
Password 'password'
Server 'not set'
MMSC 'not set'
MMS Proxy 'not set'
MMS Port 'not set'
MMC '234'
MNC '10'
Authentication 'not set'
APN Type 'default,supl'
then, a second APN, to handle the mms
Name 'O2 mms postpay' (anything)
APN 'wap.o2.co.uk'
Proxy 'not set'
Port 'not set'
Username 'O2wap'
Password 'password'
Server 'not set'
MMSC 'http://mmsc.mms.o2.co.uk:8002'
MMS Proxy '193.113.200.195'
MMS Port '8080'
MMC '234'
MNC '10'
Authentication 'not set'
APN Type 'mms'
EDIT
czacha234 said:
EDIT:
I removed two apn settings and left O2 UK (mobile data) and O2 UK MMS (wap.o2.co.uk), dont know if anything is related to this but give it a try
Click to expand...
Click to collapse
hehe, yep, those are the two thaht work.

OpenVPN on T-Mobile Note 4

For those that need to use OpenVPN on your Note 4, you may notice that you cannot connect to your OpenVPN server.
This is because the default APN for T-Mobile is using IPv6. To change it back to IPv4, you will need to create a new APN. Below are the steps to do this.
1. Open "Settings"
2. Go to the "Network Connections" section and tap on "More Networks".
3. Tap on "Mobile Networks".
4. Tap on "Access Point Names".
5. Tap on the "+" at the top of the screen.
6. Enter the following settings.
Name: any name you want
APN: fast.t-mobile.com
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: See attached image. This forum will not let me add links because I haven't posted 10 times.
Multimedia message proxy: Not set
Multimedia message port: Not set
MCC: 310
MNC: 260
Authentication type: Not set
APN type: default,mms,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Enable/disable APN: checked or "APN enabled"
Bearer: Unspecified
Mobile virtual network operator type: None
Mobile virtual network operator value: Not set
7. Click on the icon that looks like three dots in the corner and tap on the "save" button.
8. Choose the new APN you created as your default.
These settings should not interfere with your T-Mobile service. I've been using these settings since I got the Note 4 and it seems like everything is running as it should.
This is very useful. Going to give it a shot tonight.
While you are making these changes, you can also solve the issue with sending mms over wifi.
Seems like people have a problem sending mms when connected to wifi. To solve this issue change the following setting:
Multimedia message port: 80
By default and in the settings I posted, this setting was "not set". Changing it to port 80 should solve your problems if you have encountered them. You should be able to just edit this setting since you already created a new APN that works with OpenVPN. The APN that is entered in by tmobile is not editable.

Resources