So I usually sleep with my phone right beside my pillow (super nerd I know), and my bed is pretty high off the ground. The other night, when I woke up, I dropped the phone off my bed while it was still plugged in and now the cable's connection to the phone is not very stable.
I was able to straighten it out a little so that I won't have to hold the cable constantly to charge the phone. However, I think that the connection is too loose for me to simply disregard in my daily uses.
Is there any way I can fix this problem myself or have it repaired without sending the phone to T-mobile? i don't want to deal with the hassle of un-rooting my device and all that bs.
Any help is great, Thanks
That happend to me and I just bought a new usb cable....I thought it was the port the whole time and its was the cable that got damaged even though it looks undamaged....I say go to walmart and plug one of the universal micro usb chargers and see if it holds better that way you confirm if its the phone or cable
This sentence has been slaughtered by swype.......
lol it wasn't THAT bad
Same here. Almost exactly the same except I pushed mine off of the soldering station I was working on.
It is NOT the port on the phone that got damaged, I can BET you on this. It's the cable. Buy 1 or 2 new cables from Amazon and you'll be good as new. I promise. Lol.
Here: http://www.amazon.com/Samsung-Repla...UOQI/ref=sr_1_1?ie=UTF8&qid=1294247657&sr=8-1
Roughly $3.50 per cable with the shipping included. They are Samsung originals too. Note that they MAY be shorter than the cable you just broke.
Happy shopping.
Soo... I think the USB port on my T-Mobile HD2 is gone. I can feel it jiggle around when I plug in a USB cable... that and nothing happens when I do. No charge, no USB notification, nothing. Not even plugged directly into the power adapter.
My question is whether anyone knows any way to repair the phone for cheap? I've taken the phone to several cell phone repair shops, but no one can do anything without sending it off to HTC. If they do that, then HTC will charge me a crapload because the custom software on the phone somehow must've caused a hardware problem. Because the USB port is broken, I can't flash back to factory, soooo... there's nothing I can do there either.
Any help or advice would be appreciated. Thanks!
My first and only suggestion is to look for the not working phone body of HTC HD2 at ebay.com or similar. If You have some manual skills it wouldn't be so hard to replace it by Yourself. Of cause it is almost open heart surgery but it is possible to do by DIY.
If something like this would happen to me I would do so. You can look for only micro USB port to take it away from other non-working device like old camera or mp3 player or other phone.
Why they decide to use mcroUSB instead much solid miniUSB i don' know.
You can also look for micro USB connector
here
You can put a stock winmo rom (LEOIMG.nbh) on the root of your sd card and boot up into bootloader by holding the volume-down button while booting. Then the bootloader will detect the .nbh and ask you to press a certain button to install it. Then you can send the phone off to htc, it will be completely stock.
-HD2 Android-
huggs said:
You can put a stock winmo rom (LEOIMG.nbh) on the root of your sd card and boot up into bootloader by holding the volume-down button while booting. Then the bootloader will detect the .nbh and ask you to press a certain button to install it. Then you can send the phone off to htc, it will be completely stock.
-HD2 Android-
Click to expand...
Click to collapse
Wish I could, but apparently the cell phone repair shop that tried to fix my phone decided to tell HTC about my custom ROM though he told me he would be doing the repairs (only reason I left the custom ROM on there). But they actually decided to ship it to HTC. HTC decided to record the serial number so I can't send back to them anyways. =/
About the DIY repair. Would it just be a case of re-soldering the USB port back on the phone? Or is it something more technical? I'm asking because the cell phone repair shop I tried out said that they needed to replace that entire board. AFAIK, that board is the mainboard. Doing so would require buying another HD2 body, but I'm afraid that would cost far too much as I am a college student with ridiculous school fees and a very low income.
1: aww dude that sucks, they got you by the serial #
2. I have a broken micro-usb too, saw the disassembly vids, and it looks to me that the m-usb port is attached to the mainboard, and you have to consider too that if you try this as a DIY project, people have had wifi coax become damaged, lcd/digitizer damage, who knows what else from 'professional' repairs, let alone doing it yourself.
2 options, get a card reader and an external hd2 battery charger (and preferably a spare battery), or have the micro-usb port fixed by someone else or by your self.
The external charger and spare battery is cheaper by far, i paid only like $8 for each, and it's surprisingly reliable and practical.
Hope i helped
-HD2 Android-
i would totally call out on that shop and demand they fix it, since they ruined your warranty by sending it off to htc without your consent..
also, search on ebay, theres a cellshop in texas that repairs the port for $50, you mail it to them takes about a day and they mail it right back.
That sucks...I feel like the micro USB on my hd2 is about 2 die...if the phone moves at all connection and charge is lost. why oh why did these bums pick micro USB there's got 2 b a reason
To me is a serious design flaw...I mean its only a matter of time b4 the micro USB will fail on each and every hd2 regardless of how much u baby it device (which most of do)...after a certain number of charges the port goes bust
IMO the micro usbs put 2 much pressure on the port itself it's simply not big enough/solid enough of a connection to support the weight of the wire itself and over time gravity loosens and destroys ur port until u can't even.charge
Sent from my HTC HD2 using XDA App
I agree, the micro-usb is crap. Had my hd2 for like 2 weeks and i broke it by the charge cord getting caught on my foot, sending the phone flying. Luckily, i found that i could get a connection to my comp by holding the cable 'just right', flashed magldr and cwr, and just charge my batteries on the external charger now. I was stuck on the winmo 'test' rom for like 6 months lol.
-HD2 Android-
huggs said:
I agree, the micro-usb is crap. Had my hd2 for like 2 weeks and i broke it by the charge cord getting caught on my foot, sending the phone flying. Luckily, i found that i could get a connection to my comp by holding the cable 'just right', flashed magldr and cwr, and just charge my batteries on the external charger now. I was stuck on the winmo 'test' rom for like 6 months lol.
-HD2 Android-
Click to expand...
Click to collapse
dude same thing happened to me yesterday i was charging my phone and i got up to do something. And the cord caught on my foot and the phone went flying also. and when i tried to charge its like if you move the phone even the slightest it looses connection. But i found a fix that worked for me. im using my external hardrive cord to charge. the connection is a little thicker and fits in there perfectly so now i can move it and it stays connected... Only downside to me is the cord is really short
pyrorob said:
i would totally call out on that shop and demand they fix it, since they ruined your warranty by sending it off to htc without your consent..
also, search on ebay, theres a cellshop in texas that repairs the port for $50, you mail it to them takes about a day and they mail it right back.
Click to expand...
Click to collapse
Yeah, I railed at him for a good 10min in the shop with customers looking (hope I drove away some of his business...). He said that he couldn't fix my phone because I had *illegal software* on it... really? I doubt that a software problem caused the microUSB port to just break off the mainboard.
I've also looked at the disassembly video, and it doesn't seem impossible, but the cost of a micro-usb port is around $35 from what I gather. I think it would take some soldering to replace it, but I have neither a solder nor the experience to attempt it the first time on a $400 device.
I guess I'm stuck with the microSD adapter and external charger for now. ~sigh~ Maybe I'll try another internet-based cell repair shop. Anyone know anything about cellulardr.com? It's based just a couple miles from where I live and they have the part in-stock with a 50% discount that brings the price for repair down to $35 + $35 for parts which is a little high... but if it gets the job done...
I'm a [fraught] example of the result of thinking the usb would somehow last if I was just gentle. Who was I kidding, it was shot to pieces.... I've dropped £100 fixing the phone's screen which resulted in the volume buttons and vibrator dying (I argued till I was blue in the face- before I demanded they reglued the screen back on, a day after it had been 'fixed')... Damn crappy little repair shops, no leg to stand on.
And now I can't charge it.
Waited 2 days for a wall charger (and believe me that was hard as it's my work phone) to find that nomatter how long it's charged for it's dropping from 80% to dead in about an hour no activity.
I wouldn't mind so much but to have finally found a rom I liked, right through from WM to SD android versions to now Cotullas Nand, I'm reluctant to give it up, even though it's more than likely on it's last legs.
Why do phone manufacturers make crakcing phones which **** hardware and builds?
<rant over>
jemma132 said:
Why do phone manufacturers make crakcing phones which **** hardware and builds?
Click to expand...
Click to collapse
You answered that question yourself when you said:
I'm reluctant to give it up, even though it's more than likely on it's last legs.
Click to expand...
Click to collapse
If they made these things more reliable, they'd never have a means to convince you to buy another device .
well a usb port repair is totally possible with just an soldering iron, but you will need a fine tip for that and some flue that does not require cleaning. if any of the contact pad came off you better know where they go or find a way to trace where it goes. if they are broken and you find where they are connected you can use a copper wire taken out from copper brace to bridge them. lastly a broken usb port from the motherboard will never be secure again, so you have to put some padding under it so it will not be moved again; otherwise it will break and may take some contact pad with it in which makes it harder to repair again.
I fixed one of these before with only 1 broken pad that I can trace. so it is definitely possible to be done, but it will be very hard if this is your first time repairing phone. it is possible to rip the volume flex cable like I did. It took me 4 hours to solder flex by rewiring copper wires.
By the way hd2 usb port is only 7$ from eBay.
P.S the good thing about fixing phone is that, I got it from eBay, fix up, and working at $120 XD
Phone going crash
I don't know what happen recently with my phone. It just starting crashing on normal activities. I thought it was probably just the rom, but I flashed HyperDroid GBX v12, clk version and damn....i can't even get pass the boot animation. After a while I did...and then I connected my USB to my computer. Within seconds, phone crashed. I need help. I've task29 this kid like 4 times and then installed clk again.
Sometimes it is just the usb cable quality causing a bad connection... I had this Chinese micro usb data cable and it would only work at a "just right" angle, until I went to Radioshack to buy a 27 $ gold plated usb cable lol
Now everything works good and saved me from having to replace the microusb port on the phone.
Woow I thought I was the only one! I feel all your pains man..
First things first, those of you whose USB is still working, get clockwork mod set up before the USB dies.. at least with a card reader you could still flash thru zips.. I got an external charger and an extra battery as well, now I feel like my hd2 was sorta reborn! Haha..
Dunno bout you guys but I'm starting to feel that our beloved hd2 is slowly being abandoned really sad thing.. and I blame the hardware problems for this trend..
Phugz said:
Dunno bout you guys but I'm starting to feel that our beloved hd2 is slowly being abandoned really sad thing.. and I blame the hardware problems for this trend..
Click to expand...
Click to collapse
Nah, it's just nearing the end of its life cycle. There are better phones coming out now with faster processors and more resources to run bigger software and flashier graphics.
The HD2 has actually stayed on the top of the hill for a surprisingly long time, and in some ways still is.
The biggest difference with the HD2 compared to other phased-out smartphones, I think, is that the HD2 is still very useable even though it is well beyond its originally intended amount of time in the limelight.
I notice this whenever I dig out one of my old devices that I haven't used in a long time, like my Kaiser or Rhodium. They are so slow and basic that they're almost unuseable, where the HD2 is fast, smooth, and seems modern still.
But the mUSB port on these things is ****. Mine's been half-busted for almost a year. I have a wall charger and extra battery, and if I hold the cable just right, I can usually get a connection to the computer, but it's just easier to pop my sd card in one of my old devices to connect to pc and transfer files. The mini-USB ports never gave me near as much trouble as the micro ones, I wish they'd have never switched.
huggs said:
Nah, it's just nearing the end of its life cycle. There are better phones coming out now with faster processors and more resources to run bigger software and flashier graphics.
Click to expand...
Click to collapse
Hi all,
Just thought I'd let you know how I fixed my HD2's loose / non-functioning microUSB port.
I've had similar problems for the last 6 months or so - dodgy microUSB connection resulting in massive amount of fiddling in terms of getting the cable just right, then pretty much completely screwed!
I took receipt of a HTC Sensation a few weeks ago, so decided to spend a little while opening up my now redundant HD2. Dissasembly is pretty easy & self-explanitory, but the leaked videos showing you how to do it is pretty useful. I'm no whizz at these things, but even I managed to do it (mostly) with just a kitchen knife (forgot where I'd put my small screwdrivers, which I eventually found, but everything seemed more dangerous & exciting with the knife).
ANYWAY, I've managed to secure a completely loose microUSB port which means perfect charging & USB connection again. It was incredibly loose & just fell out when I separated the mainboard from the chassis, but I put a bit of rubber I found under it (soldering iron is for pros... I'm winging it here!) & secured the mainboard tightly with screws.
I mean, there's probably a better way to do it, but I couldn't be arsed using any more ingenuity than required... it's a Bank Holiday after all, and the solution seems to have worked pretty damn well.
Cheers,
Dan.
Hi, I can only charge my HTC HD2 phone using the USB port, but I cannot use the usb port for activeSync and USB function (data transfering). I wonder if the USB posrt is dead already?? Why the phone still can be charged via the USB port? Can anyone tell me how to fix this?
Thanks in advance.
mantis123 said:
Hi, I can only charge my HTC HD2 phone using the USB port, but I cannot use the usb port for activeSync and USB function (data transfering). I wonder if the USB posrt is dead already?? Why the phone still can be charged via the USB port? Can anyone tell me how to fix this?
Thanks in advance.
Click to expand...
Click to collapse
I had the same problem last week. My pc couldn't recognize it, but i was able to charge it.. I just took an other usb cable and the problem was solved.
I swear for as smart.and.as great as this phone is, the easiest things to fix which pose the biggest.problems arent.fixed. Having the phone plugged.in.while using.it in landscape creates huge stress.on the port. So much that the cable gets looser as the pins are bent. Stupid samsung with their.idiotic location for.ports, but I.digress... has anyone found a longterm fix for this? . I thinking like a plastic moount that clips.to.
The bottom of the phone and.encases the beginning of the charger cable to prevent any stress in any direction? My temporary solution is I rubberband the beginning of the cable in a few loops as if I have it zip tied. This prevents any minor tugging from directly pulling the port.
First of all new USB 3 port cost about $14 and could be replaced by user in about 30 min even if you don't have 1 yr warranty. You can use any USB 2 wire to charge Note 3, some are much thinner and more flexible, than the factory cable. And with at least 6 hours screen time I can't imagine running out of power before night, when I put it on charger and go to sleep, but I do have full time job and little kids so actually never had a chance to use it for 6 hrs in 1 day anyhow. Maybe you need bigger battery and if you don't like Samsung design maybe another phone, I don't see anything wrong with it, otherwise would not buy it, heard Apple is a popular brand, but never actually used it.
pete4k said:
First of all new USB 3 port cost about $14 and could be replaced by user in about 30 min even if you don't have 1 yr warranty.
Click to expand...
Click to collapse
I hate giving a reply that doesn't really help the OP, but I can somewhat sorta agree with this comment. Sorta.
Because I got the Note 3 now but haven't broken its port yet.
However I did have the Note 2 and the Galaxy S2 and there was that issue if you're careless. Sloppy plugging and stress, sometimes a few drops of water falling on the port too and shorting it, etc. Anyway, I'm very unskilled and clumsy regarding basic electronics repairs but still managed to replace the USB board on the S2 with Ebay parts. It was less than 20 USD, the board and a kit of screwdrivers. It really is very easy to replace that part if you damage the USB port (getting the infamous "charging / not charging intermittent warnings, even when the phones are not connected to anything).
I seriously doubt the N2 or N3 are much more complex. (I used repair videos on YouTube for the S2, I'm sure they will pop up for the N3 if relevant)
Not so with other components (Screen, for instance). So take some care with it and don't worry too much because even home-repair is fairly accessible and cheap in that case.
Okay let me paint you a picture..I play aot of poker. there is an outlet under the table so I have my phone plugged in sitting on the rail behind my chips as I either watch 24/7 movies or play games.but since my phone is horizontal, naturally gravity works its magic and puts pressure on the port. not only that, but the less slack I have the more pressure is applied.
so as you can see my circumstances are very specific to my regular usage of this device. hence I utilize rubber bands.sometimes.
If you guys are really concerned about the usb port on the phone being damaged, maybe something like the qi wireless charger can help.
Or maybe buying a spare battery.
Or buy a right angled usb cable
Sent from my IdeaTab S6000-F using XDA Premium 4 mobile app
I got a good deal on a refurbished Tegra Note 7 so I quickly snagged it as I wanted a tablet for media consumption, some browsing + gaming! Now I've read all the reviews and came across the infamous ultra flimsy micro-usb port. I'm hoping that the tablet was refurbished because of a faulty port and they put in an awesome one! Anyway, do you guys have any suggestions for me so that I don't break the port like using a particular charger, any specific way to charge it(Wireless Charging without any soldering or other method that requires skills with tools?) or anything, really. Also, in case it does break, I'm guessing inevitably it will, has anyone found a convenient way except sending it to the respective manufacturers?
I just recently got a used one off eBay. The cord that came with it was a very tight fit and I could see how that would eventually break the port. Fortunately my samsung cord slips on the port very easily. And since it's white I marked the top of the cord with black magic marker so I never put it in wrong. So far it's working out great.
There's not much else to do but be extremely careful or go buy a Micro USB Type A cable. The whole problem with the port is that they used the wrong one.
http://www.yogaretnam.com/wp-content/uploads/2012/07/micro_usb_type_a_b.jpg
I never even knew there were two types of Micro USB connectors until I got this thing. I never bothered to get the right cable (and Nvidia didn't bother including the right one... did they even know there were two types?), and thanks to a minor fall while plugged in, I have to plug my cable in slightly crooked to get it to charge right. If I plug it straight in, it will show it's charging but actually drain the battery even if the stupid thing is off!
so I broke the tab in the usb port in my nexus 4. I bought an induction charger but it doesn't seem to be charging the thing very well. It will sometimes turn on and I can see the battery is at 0% and it shuts down. do you think there is a chance there is a short in the port itself making it so that the battery drains itself? I left it charging overnight with no luck. What to do next? remove the port entirely while I wait for the new usb daughter board to come in the mail?
mikkowus said:
so I broke the tab in the usb port in my nexus 4. I bought an induction charger but it doesn't seem to be charging the thing very well. It will sometimes turn on and I can see the battery is at 0% and it shuts down. do you think there is a chance there is a short in the port itself making it so that the battery drains itself? I left it charging overnight with no luck. What to do next? remove the port entirely while I wait for the new usb daughter board to come in the mail?
Click to expand...
Click to collapse
I think it's more likely that the broken USB tab is causing either a short or has broken a connection the phone expects, which fools the circuitry into thinking the phone is plugged in to USB, which won't allow it to charge via Qi. You could try charging it with the daughterboard removed, but I'd be surprised if it works. Hopefully you have a back-up phone while you wait for the part, even if it's a RAZR V3 or Nokia 3310. SIM won't match, obviously, but you can probably pick up an adapter locally.
Planterz said:
I think it's more likely that the broken USB tab is causing either a short or has broken a connection the phone expects, which fools the circuitry into thinking the phone is plugged in to USB, which won't allow it to charge via Qi. You could try charging it with the daughterboard removed, but I'd be surprised if it works. Hopefully you have a back-up phone while you wait for the part, even if it's a RAZR V3 or Nokia 3310. SIM won't match, obviously, but you can probably pick up an adapter locally.
Click to expand...
Click to collapse
That makes sense. I do have an old samsung tmobile phone that lasts about 4 hours on its battery. I guess I might be using that for a few days. I'ts at home though and I'm at work. It would be nice if this thing would just work. I need to find a t5 torx wrench and scew it up more......
mikkowus said:
That makes sense. I do have an old samsung tmobile phone that lasts about 4 hours on its battery. I guess I might be using that for a few days. I'ts at home though and I'm at work. It would be nice if this thing would just work. I need to find a t5 torx wrench and scew it up more......
Click to expand...
Click to collapse
Some advice for someone who hasn't taken this phone apart yet:
First, go to ifixit and familiarize yourself with the teardown guide. There are also some youtube videos that are helpful (if you can't find them immediately, look for screen replacement guides.
Second, you'll need something thin and flat, and hopefully not with sharp edges. They make tools for this, but I doubt you'll be willing to order them and wait. Myself, I used the nail file from a keychain Swiss Army Knife. It's possible, even likely you'll cosmetically damage the plastic up a bit. If you have a hair drier (or even a heat gun), this can aid in softening up the adhesive. In any case, go slowly.
Do the disassembly over a fluffy towel. There are many tiny screws, and a fluffy towel will trap them rather than having them bounce away and disappear.
As I write this, another thought occurs to me. If you can, wait a few more days, but order yourself a new battery off eBay. Many sellers include the needed disassembly tools (including a T5 TORX, small Philips, and the plastic separating tools). Your Nexus 4 is probably 1.5-2.5 years old by now, which means your battery has had well over 500 cycles. At this point, you've lost upwards of 20% your battery's original capacity. Or don't wait, but order a new battery anyway and reopen the phone when you get it. The degradation of a battery is slow and one really doesn't notice it until that day you think to yourself "it seems like it used to last longer". Indeed, you may open up your phone to discover a puffed-out battery in desperate need of replacement anyway.
Planterz said:
Some advice for someone who hasn't taken this phone apart yet:
First, go to ifixit and familiarize yourself with the teardown guide. There are also some youtube videos that are helpful (if you can't find them immediately, look for screen replacement guides.
Second, you'll need something thin and flat, and hopefully not with sharp edges. They make tools for this, but I doubt you'll be willing to order them and wait. Myself, I used the nail file from a keychain Swiss Army Knife. It's possible, even likely you'll cosmetically damage the plastic up a bit. If you have a hair drier (or even a heat gun), this can aid in softening up the adhesive. In any case, go slowly.
Do the disassembly over a fluffy towel. There are many tiny screws, and a fluffy towel will trap them rather than having them bounce away and disappear.
As I write this, another thought occurs to me. If you can, wait a few more days, but order yourself a new battery off eBay. Many sellers include the needed disassembly tools (including a T5 TORX, small Philips, and the plastic separating tools). Your Nexus 4 is probably 1.5-2.5 years old by now, which means your battery has had well over 500 cycles. At this point, you've lost upwards of 20% your battery's original capacity. Or don't wait, but order a new battery anyway and reopen the phone when you get it. The degradation of a battery is slow and one really doesn't notice it until that day you think to yourself "it seems like it used to last longer". Indeed, you may open up your phone to discover a puffed-out battery in desperate need of replacement anyway.
Click to expand...
Click to collapse
Cool. I did end up ordering a new battery because of just that thought. It will be coming Friday though so I might not want to wait. I'll probably end up opening it up twice.. I also happened to open the phone about a 3 weeks after I bought it as somehow the screen cracked. I also have a heatgun. The phone is pretty old. I got it on release.