[Q] Bootloader help needed - myTouch 4G Q&A, Help & Troubleshooting

My power button no longer works on my phone. I need to restore to stock using the PD15IMG.zip but I can not get there without using the power button. I can get to fastboot, just not the bootloader (using adb reboot bootloader). Is there any way I can get to the bootloader without using the power button because I do not want to return this phone non stock?

toby4059 said:
My power button no longer works on my phone. I need to restore to stock using the PD15IMG.zip but I can not get there without using the power button. I can get to fastboot, just not the bootloader (using adb reboot bootloader). Is there any way I can get to the bootloader without using the power button because I do not want to return this phone non stock?
Click to expand...
Click to collapse
Try looking here http://forum.xda-developers.com/showthread.php?t=619153

dubie76 said:
Try looking here http://forum.xda-developers.com/showthread.php?t=619153
Click to expand...
Click to collapse
The thing is if you adb reboot bootloader, it takes you to fastboot. The only way to get from fastboot to bootloader is the power button which I cannot use.

toby4059 said:
The thing is if you adb reboot bootloader, it takes you to fastboot. The only way to get from fastboot to bootloader is the power button which I cannot use.
Click to expand...
Click to collapse
And you already tried pulling the battery, putting it back in while holding the volume down? f you have, you might be in a pinch.

I came to a solution. I updated my recovery through rom manager to one that doesnt turn on when power is plugged in. So now there is no way they could get the phone on any way.

toby4059 said:
I came to a solution. I updated my recovery through rom manager to one that doesnt turn on when power is plugged in. So now there is no way they could get the phone on any way.
Click to expand...
Click to collapse
So when they fix the power button they won't see it's been rooted? They fix the phones at the T-mobile facility and check everything out.

I am pretty sure that rooting the phone only voids the warranty for software. The power button is a hardware issue, so I don't think you will have an issue either way.

kalel33 said:
So when they fix the power button they won't see it's been rooted? They fix the phones at the T-mobile facility and check everything out.
Click to expand...
Click to collapse
Hey, if they get it fixed then call me and tell me its rooted, then I'll just tell them to send it back to me. I'll take it free of charge
Although, in all seriousness, I'd probably be screwed; however, I sent my last phone back when it wouldn't turn on rooted.

let us know what happened

lowandbehold said:
I am pretty sure that rooting the phone only voids the warranty for software. The power button is a hardware issue, so I don't think you will have an issue either way.
Click to expand...
Click to collapse
Forgot to check this thread in awhile, but just for future reference, there is no software warranty and separate hardware warranty. There is only one warranty and if anything voids it then it doesn't matter if it was hardware or a software issue. I've seen out of warranty fees charged because there was a software issue and the phone had a slight crack on the screen in the corner.

toby4059 said:
Hey, if they get it fixed then call me and tell me its rooted, then I'll just tell them to send it back to me. I'll take it free of charge
Although, in all seriousness, I'd probably be screwed; however, I sent my last phone back when it wouldn't turn on rooted.
Click to expand...
Click to collapse
They don't return phones sent in. It's actually part of the script read to you that once sent that T-mobile will not return it.

Related

My vibrant is totally bricked

Unable to turn it on. totally bricked
So... Are you unable to turn it on due to no fingers?
Lol yea what happened?
Well, we need a bit more info.
Sent from my SGH-T959 using XDA App
1. have you tried "power button" ?
2. have you charged the phone ?
on a bright side, you are the 1st one !
Maybe your battery is loose? Not to mention that bricking a
phone is usually due to screwing up a software flash. So, is brick really the right word?
Sent from my SGH-T959 using XDA App
kolyan said:
1. have you tried "power button" ?
2. have you charged the phone ?
on a bright side, you are the 1st one !
Click to expand...
Click to collapse
LOL!!
Try holding down the volume down button as you turn the phone on...see if that does anything.
Only time I'd allow the "First" comment to be used in a thread.
Im guessing CW Recovery...
Thank you guys
I think it's bricked, and unrecoverable.
After several flashing, It suddenly turned off then never woke up again. Any effort so far is hopeless
bl4ckdr4g00n said:
Thank you guys
I think it's bricked, and unrecoverable.
After several flashing, It suddenly turned off then never woke up again. Any effort so far is hopeless
Click to expand...
Click to collapse
What were you flashing? Give more info and maybe ppl would/could help you!
All~G1 said:
What were you flashing? Give more info and maybe ppl would/could help you!
Click to expand...
Click to collapse
I tried with captivate stock firmware, i9000 international firmware, then I flash back to vibrant stock firmware.
After had things done with Odin, my phone restarted, and it was the last time I saw my baby working as a smart phone.
Did you try to reboot the phone into recovery or download mode?
DAKIDD236 said:
Did you try to reboot the phone into recovery or download mode?
Click to expand...
Click to collapse
How can I do that when I can't even turn it on?
bl4ckdr4g00n said:
How can I do that when I can't even turn it on?
Click to expand...
Click to collapse
Have you tried plugging it into your charger? does the battery/charging screen come on?
bl4ckdr4g00n said:
How can I do that when I can't even turn it on?
Click to expand...
Click to collapse
try this Koush posted this in his thread.. hope it works
Koush said:
If you are stuck on the phone to PC screen, you are NOT bricked. During development, I ended up getting into this state a couple times myself. You can still get into download mode in the same fashion.
Connect your phone to USB so you get the phone->PC screen. Press and hold both volume up/down. Then press and also hold Home. Then start pressing and holding power for 2 seconds. After 2 seconds, let go of power. Continue holding volume up, volume down, and home, until you get into download mode.
Click to expand...
Click to collapse
All~G1 said:
Have you tried plugging it into your charger? does the battery/charging screen come on?
Click to expand...
Click to collapse
no, a completely blank screen.
no icon, no GUI, no nothing (
Yeah, weird...I just flashed back to US firmware and now my phone is totally unresponsive to everything. Keep in mind I've flashed back and forth several times...even once thought my phone was bricked because the power button wouldn't even turn the screen on. But after holding the correct buttons it finally booted into download mode. I was even using my phone earlier just fine, and having it run quadrant test of 1700, but as soon as I flashed back to 100% stock US firmware, my phone now no longer boots. Go figure lol.
Though this time I think it has bit the dust for real, lol. So be weary of flashing back to US firmware if you are flashing a lot of different other firmwares. Cuz I think something happens and the key combinations get deleted so it refuses to boot into any mode.
DAKIDD236 said:
try this Koush posted this in his thread.. hope it works
Click to expand...
Click to collapse
I"m at the phone to pc screen..but the Home button is not a "button" it's a touch sensitive button on my vibrant and it won't go into download mode...
I got here because i flashed the custom kernel to put the market and data on a ext4 partition...and it reversed my volume buttons and reversed the routing of sound..headphone speaker..that stuff....so i couldn't hear anything...so when i went to reflash stock t-mobile firmware it told me not to unplug for like hours..it wasn't doing anything.....i took the battery out and now i'm stuck at phone to pc...i think i might just use the warranty..seeing as u can't do a think with it...atleast i can't that is..i feel like a moron...
the forum said to work on com7 but com4 was showing up in odin...i couldn't get it to go on com7 so i thought it should still work....
fykick said:
even once thought my phone was bricked because the power button wouldn't even turn the screen on. But after holding the correct buttons it finally booted into download mode.
Click to expand...
Click to collapse
what was your combination?
I hold volume up and down..then hold home with those..then power for 2 seconds..let go and nothing...it doesn't recognize i'm holding the home because it's a software based button..the home key that is..and with no software...no button...so i'm afraid this screen means bricked...adb reboot download won't work either...i'm gunna get it exchanged in the morning..under buyers remorse..

nexus one randomly just... died?

so, My n-1 had an "intermittent" power button problem.
so tonight, I had sent a text to someone, and saw that I had no response, so I clicked on the power button, nothing.
I charged phone, and the light goes to green when fully charged.
I can't soft, or hard reset the phone, since I'm guessing the power button isn't working or something?
The last thing that I had noticed, was that google goggles had updated itself.
Also, plugging it into the computer isn't doing anything either. There was no overheat issue, and I'm running vanilla stock froyo not rooted.
any ideas on what to do before I call HTC tomorrow?
edit: weird, I finally got it to turn on, by plugging in the usb, and taking out, and reinserting the battery a few times. I guess, if it does it again, back to HTC it will go.... but it still seems that the power button itself is not working.
edit again!:
power button has definitely failed. I downloaded widgetlocker as a temporary fix.... if anyone has any ideas (i.e. hard resetting the phone etc.) let me know before I call HTC please.
It's a HW failure, you should get it replaced. And on the next one install a ROM that supports trackball wake, that'll leave your power button much less prone to damage.
Downloaded no wake and sent in for a new phone. Luckily 2:00 am hawaii time is 7:00 am est.
Edit. Program is no lock lol.
another n1 user in hawaii sweet! lol
Jack_R1 said:
It's a HW failure, you should get it replaced. And on the next one install a ROM that supports trackball wake, that'll leave your power button much less prone to damage.
Click to expand...
Click to collapse
Yes, but swapping Roms would kill the warranty and not enable me to get one repaired / replaced. ( yes I know most people with unlocked bootloaders got theirs fixed, but I'm not that lucky in life )
mrbkkt1 said:
Yes, but swapping Roms would kill the warranty and not enable me to get one repaired / replaced. ( yes I know most people with unlocked bootloaders got theirs fixed, but I'm not that lucky in life )
Click to expand...
Click to collapse
You can root without unlocking the bootloader and voiding the warranty. I never thought I'd do it, but I did and am so happy. It's like I have a whole new phone.
bigmout said:
You can root without unlocking the bootloader and voiding the warranty. I never thought I'd do it, but I did and am so happy. It's like I have a whole new phone.
Click to expand...
Click to collapse
All my winmo phones needed new roms do I swapped like crazy. N1 was so solid out of the box I didn't feel the need to. On a side note. I'm still waiting for a shipping email. I wonder if they are out of stock?

I think I bricked my Vibrant... Quick question..

Went to flash from CM7 back to stock (following advice I found elsewhere on here,) and flashed just the .pit file, forgot to select the .tar file in ODIN.
After doing so, my phone is a complete brick. No power, no recognition in windows (adb or otherwise,) etc.
Is there anything I can do, or is it a total brick?
T-mobile has sent me a new phone as this phone's microphone stopped working a while ago, but I figured I'd make it stock prior to sending it back.
If it is bricked, will T-mobile figure out I had CM7 on it and charge me for the phone?
Thanks for the info!
Ian
ipugh said:
Went to flash from CM7 back to stock (following advice I found elsewhere on here,) and flashed just the .pit file, forgot to select the .tar file in ODIN.
After doing so, my phone is a complete brick. No power, no recognition in windows (adb or otherwise,) etc.
Is there anything I can do, or is it a total brick?
T-mobile has sent me a new phone as this phone's microphone stopped working a while ago, but I figured I'd make it stock prior to sending it back.
If it is bricked, will T-mobile figure out I had CM7 on it and charge me for the phone?
Thanks for the info!
Ian
Click to expand...
Click to collapse
Do any lights come on at all? like the home key return key? When you charge it?
I have yet to hear of anyone sending their bricked phone back to tmobile and haveing them hear about it.
nomadrider123 said:
Do any lights come on at all? like the home key return key? When you charge it?
I have yet to hear of anyone sending their bricked phone back to tmobile and haveing them hear about it.
Click to expand...
Click to collapse
Absolutely nothing -- no lights at all.
Ian
Send it back; there's no way they'll find out if no lights come on.
djquick said:
Send it back; there's no way they'll find out if no lights come on.
Click to expand...
Click to collapse
Thanks!
Ian
ipugh said:
Absolutely nothing -- no lights at all.
Ian
Click to expand...
Click to collapse
Yep it's bricked then send it back, your safe. Be careful on the new phone
I bricked five times they yet to say anything ,lol as long as the phone physically good they will send you a new phone and fast to no questions asked.
Sent from my HTC Sensation 4G using XDA Premium App
Try to get into download mode.
My phone usually doesnt do anything or turn on when soft bricked. Only in download mode
Sent from my SGH-T959 using XDA App
Alanrocks15 said:
Try to get into download mode.
My phone usually doesnt do anything or turn on when soft bricked. Only in download mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Tried that every way I know how.
I hold down both up and down volume buttons and try to turn it on. Nothing.
This is how I would previously get into download mode.
For what it's worth, I'm very careful with the phone. Was screwing around when I knew it was going back. I honestly was prepared to just buy a new one..
Thanks to everyone!
ipugh said:
Tried that every way I know how.
I hold down both up and down volume buttons and try to turn it on. Nothing.
This is how I would previously get into download mode.
For what it's worth, I'm very careful with the phone. Was screwing around when I knew it was going back. I honestly was prepared to just buy a new one..
Thanks to everyone!
Click to expand...
Click to collapse
Try holding both volume keys, plugging into the computer. You should get into download mode that way. Then you could pop the battery back in.
Folks, unless you screwed up flashing a *bootloader* your phone is not bricked.
Remove the battery and sim card. Plug into USB port.
Hold both volume up and down while simultaneously insert the battery. Viola, download mode.

Hard bricked nexus 4 help please?

So last night I hard bricked my nexus 4. its rooted, with cyanogenmod 10.1 ROM, and ive never had any issues with this phone. I have no idea what happened, but I sent a text message to someone, and it powered itself down. it was fully charged when this happened, so I know its not the battery. ive done some research, and its a true hard brick. no bootloader, no recovery, I just get a red/orange flashing light if I hold down the power button. google said im still under warranty, and they will still replace it even with it being rooted. My question is, is it possible to fix without having to get a replacement, or JTAG? If anyone has had any success, please help.
And like I said, I was only sending a text. I have no idea why it bricked, it restarts itself once in a while randomly, but this time it didn't turn back on.
Try plugging it into the wall for about 5 minutes then try turning it on again. If it doesn't work, RMA it. Why would you risk your warranty and JTAG it?
exb0 said:
Try plugging it into the wall for about 5 minutes then try turning it on again. If it doesn't work, RMA it. Why would you risk your warranty and JTAG it?
Click to expand...
Click to collapse
No, I DONT want to JTAG it. im looking for alternatives. if its possible to fix a hard brick without JTAG or using my warranty. If at all possible, I want to fix it, because I have a lot of pictures and everything on there that I would like to get out of it. I don't want to lose them. JTAG is my last resort if I cant get it replaced, but they said they would. I want my stuff off it though.
sinndissension said:
No, I DONT want to JTAG it. im looking for alternatives. if its possible to fix a hard brick without JTAG or using my warranty. If at all possible, I want to fix it, because I have a lot of pictures and everything on there that I would like to get out of it. I don't want to lose them. JTAG is my last resort if I cant get it replaced, but they said they would. I want my stuff off it though.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2347060
This is your last hope. If it doesn't work, RMA it and request for your data to be saved. Not sure if they can do it, but just ask.
exb0 said:
http://forum.xda-developers.com/showthread.php?t=2347060
This is your last hope. If it doesn't work, RMA it and request for your data to be saved. Not sure if they can do it, but just ask.
Click to expand...
Click to collapse
thank you I really appreciate it. im gonna try it out and see if it works.
This might be a noob question, but ive never heard of download mode. is it the same as recovery mode on the nexus 4?
sinndissension said:
thank you I really appreciate it. im gonna try it out and see if it works.
This might be a noob question, but ive never heard of download mode. is it the same as recovery mode on the nexus 4?
Click to expand...
Click to collapse
Nope. It's different.
sinndissension said:
thank you I really appreciate it. im gonna try it out and see if it works.
This might be a noob question, but ive never heard of download mode. is it the same as recovery mode on the nexus 4?
Click to expand...
Click to collapse
You can compare it too fastboot mode.
gee2012 said:
You can compare it too fastboot mode.
Click to expand...
Click to collapse
ok so if the nexus 4 wont go into download mode, or fastboot, or anything else, I have no choice but to RMA it right? cuz the ONLY response im getting from it is a red/orange flashing light when I hold down the power button. other than that, nothing happens.
sinndissension said:
ok so if the nexus 4 wont go into download mode, or fastboot, or anything else, I have no choice but to RMA it right? cuz the ONLY response im getting from it is a red/orange flashing light when I hold down the power button. other than that, nothing happens.
Click to expand...
Click to collapse
Did you press volume down first and then the power button both for a few seconds to get into fastboot mode?
Nope. The ONLY time it has any sign of life is if the charger is connected to it and I hold down the power button. If it's NOT connected to the charger, pressing the power button does absolutely nothing. I can't go into recovery mode, download mode, or the bootloader. I've tried charging it overnight, (and part of the next day) left it off the charger for over a week, it shows up as "Qualcomm-something" when I plug it into a computer, but I can't do ANYTHING with it connected to a computer either, and after I got my replacement, I tried taking out the battery and putting it back in. There was still no change......I've literally done EVERYTHING short of JTAG. Trust me, I searched all over google, and XDA, and tried everything. As far as I know, hard bricking is rare, but it happens. And it just happened, to happen to me. So unless there's a solution someone knows of that I didn't just list, my last option is JTAG.
sinndissension said:
yep. ive done EVERY combination of holding down the buttons, no response. when I plug it in to a laptop, the laptop beeps, like the USB connection sound, but the nexus doesn't show up on the computer. I know the computer recognized what kind of phone it was, cuz the first time I plugged it in, I got a pop up message saying "installing qualcom drivers", or along the lines of that. other than that, NOTHING has worked. If theres ANY fix for this, id like to give it a try, cuz ALL my stuff is on there.
Click to expand...
Click to collapse
Try charging it for a while and try again in a few hours or better yet tomorrow. Sometimes that helps bro. If that doesn`t help you`ll have to take it in for repair an maybe they can salvage your data if they are wiiling to do that. Good luck.
I think it's just your battery(RLOD) instead of a brick.
See this:
http://forum.xda-developers.com/showthread.php?t=2250454
I wouldn't be worried about your files stored on your phone because I think Google has more work to do than search in peoples pictures. What I would worry about is your warranty since you have a custom rom, unlocked bootloader and root...
Sent from my Nexus 4 using xda app-developers app
Well, found out it WAS a hard brick. Google replaced it with my warranty. For some reason they returned my money before I even got the chance to send the broken nexus 4 back. Didn't even mail it. So I'm assuming I don't have to send it back. So I'm gonna JTAG the hard bricked nexus, and hopefully it'll work again.
Thanks everyone for your help.
sinndissension said:
ok so if the nexus 4 wont go into download mode, or fastboot, or anything else, I have no choice but to RMA it right? cuz the ONLY response im getting from it is a red/orange flashing light when I hold down the power button. other than that, nothing happens.
Click to expand...
Click to collapse
You may not be doing it right. When I get the flashing light on mine it means I forgot to let go of the power button fast enough. When it vibrates, let go of power button immediately but keep pressing the volume. Does your phone vibrate a few seconds prior to the flashing light?
Sent from my GT-P7510 using xda app-developers app
Nope. The ONLY time it has any sign of life is if the charger is connected to it and I hold down the power button. If it's NOT connected to the charger, pressing the power button does absolutely nothing. I can't go into recovery mode, download mode, on the bootloader. I've tried charging it overnight, (and part of the next day) left it off the charger for over a week, it shows up as "Qualcomm-something" when I plug it into a computer, but I can't do ANYTHING with it connected to a computer either, and after I got my replacement, I tried taking out the battery and putting it back in. There was still no change......I've literally done EVERYTHING short of JTAG. Trust me, I searched all over google, and XDA, and tried everything. As far as I know, hard bricking is rare, but it happens. And it just happened, to happen to me. So unless there's a solution someone know of that I didn't just list, my last option is JTAG.
sinndissension said:
Nope. The ONLY time it has any sign of life is if the charger is connected to it and I hold down the power button. If it's NOT connected to the charger, pressing the power button does absolutely nothing. I can't go into recovery mode, download mode, on the bootloader. I've tried charging it overnight, (and part of the next day) left it off the charger for over a week, it shows up as "Qualcomm-something" when I plug it into a computer, but I can't do ANYTHING with it connected to a computer either, and after I got my replacement, I tried taking out the battery and putting it back in. There was still no change......I've literally done EVERYTHING short of JTAG. Trust me, I searched all over google, and XDA, and tried everything. As far as I know, hard bricking is rare, but it happens. And it just happened, to happen to me. So unless there's a solution someone know of that I didn't just list, my last option is JTAG.
Click to expand...
Click to collapse
so i have the same problem. was about to tweet with full battery so my question is what did you end up doing? Did you fix it or abandon it?
Weird. I've had the "red light of death" 2 hours ago because i didn't put the phone on the charger and it had like 4%. Pressing Volume down + power got it to enter fastboot and i was able to start the phone normally so it's charging booted
Mashed_Potatoes said:
Weird. I've had the "red light of death" 2 hours ago because i didn't put the phone on the charger and it had like 4%. Pressing Volume down + power got it to enter fastboot and i was able to start the phone normally so it's charging booted
Click to expand...
Click to collapse
ok...that has nothing to do with a hard brick. That just means your phone was dying.
dominiqueovalle said:
so i have the same problem. was about to tweet with full battery so my question is what did you end up doing? Did you fix it or abandon it?
Click to expand...
Click to collapse
Ok, I got mine replaced because it was still under warranty, and normally, the manufacturer cant tell its rooted or unlocked if its a true hard brick, (rooting and unlocking voids your warranty.) So i got mine replaced.
If your NOT under warranty still, your ONLY option if you want to fix it is JTAG. Google it, it costs about 50 bucks on average, but its cheaper than a Nexus 4. Research JTAG before you try it though. Or you have to buy a new one. I still have my only one, and i basically use it for parts for my newer N4.
Is it a true HARD brick, or just a soft brick?
sinndissension said:
Ok, I got mine replaced because it was still under warranty, and normally, the manufacturer cant tell its rooted or unlocked if its a true hard brick, (rooting and unlocking voids your warranty.) So i got mine replaced.
If your NOT under warranty still, your ONLY option if you want to fix it is JTAG. Google it, it costs about 50 bucks on average, but its cheaper than a Nexus 4. Research JTAG before you try it though. Or you have to buy a new one. I still have my only one, and i basically use it for parts for my newer N4.
Is it a true HARD brick, or just a soft brick?
Click to expand...
Click to collapse
its a hard brick. ive tried it all bought a new battery installed it etc. ive looked up jtag and i have the money but idk if i should do it. do you recomend it? i have no experience doing anything like it and im planning on getting the iphone 6 in the fall but i cant stand not having a phone till then especially since high school starts soon.
But the reason im sure its a hard brick is cuz when it shut down the battery was like 50 and charging and it froze for 25 seconds or so then shut down and refuses to boot or show any signs of life now except a blinking or solid red light but its not the red light of death because i replaced the battery therefore i came to the conclusion that it is hard bricked.
i know ive said alot of unecessary information but my question is do you think i should buy the jtag thing? do you reckon its easy to do? or maybe i could pay an experienced professional to do it?
thanks for the reply btw

can't enter into fastboot

Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
p.s I have used to think that my fastboot was deleted but on an other thread i have been told that as long as i see the cyanogenmod loading screen of the OS that means i have a boot-loader.
Please help!
I want to get into Fastboot on my Moto Pure.
Thanks a lot
Eden.
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
PassatSport15 said:
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
Click to expand...
Click to collapse
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Sagar_1401 said:
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Click to expand...
Click to collapse
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
edenah said:
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
Click to expand...
Click to collapse
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader​.
aybarrap1 said:
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
Click to expand...
Click to collapse
Yes thats exactly what i mean.
dzidexx said:
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader​.
Click to expand...
Click to collapse
tried this, but the device still goes into the cyanogenmod loading screen.
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Sagar_1401 said:
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Click to expand...
Click to collapse
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
edenah said:
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
Click to expand...
Click to collapse
We haven't been able to get the QLoad files for most Moto devices, at least not for the last 2-3 years... Sorry.
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
edenah said:
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
Click to expand...
Click to collapse
I am stuck. No button combination works. I suspect that the device isn't really off but the display is just closed. As even to open up the device takes a reallly long press on the power button.
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
edenah said:
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
Click to expand...
Click to collapse
ericpeacock79 said:
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
Click to expand...
Click to collapse
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Sagar_1401 said:
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Click to expand...
Click to collapse
i see :'(
Ok Thank your guys
I guess its a lost cause.
edenah said:
i see :'(
Ok Thank your guys
I guess its a lost cause.
Click to expand...
Click to collapse
Lost cause? No, probably not... Do you know anyone in the US you trust well enough to receive the phone from repair and ship it to you where ever you are? I believe that is all you need. The US service center cannot ship outside of North America (maybe US), but they can receive packages from anywhere. If you had a US contact that could receive the device and forward it on to you it might be worth it to get it fixed if it is still under warranty, if it isn't, then it might not be worth fixing. Lots of things to consider here.

Categories

Resources