Just got myself a transformer today and it seemed great, however right after about 5 minutes the thing goes nuts like someone is swiping or touching the screen. Mostly just one spot on the left side and it will do it whether I'm holding it or it's sitting by itself. Can't seem to find anything posted about this wondering if thats because it's not common or I'm just not looking for the right stuff? Any help would be great, will likely return it tomorrow anyhow but if there's a fix would be nice.
Yeah, I got this as well while playing Angry Birds (F'd up my scores ! ). I don't know if it will work for you, but I just cleaned the screen really well with a cotton ball and alcohol, dried it, then used a microfiber cloth to clean it up (the ones that come with glasses, screen protectors). It worked for me, i think there was some gunk on the screen and was registering as a touch..
Try a factory reset and if it doesn't work take it back for a new one.
Thanks I can't see it being something on screen but will give it a wipe done here in a minute. Also tried the factory reset seemed to help but still getting in same frequency just not as badly. will see if the cleaning doesn't work I'll take it back and replace it.
This is the biggest annoyance that I have as of recent.
I have particularly oily fingerprints which causes smudges constantly.
I love the sensitivity of the TF, but if there is excessive smudging, the residue will register as a screen input - Wish the sensitivity could be adjusted.
Weird things happen when I need to clean the screen... I.E. I will be using a browser and use a single touch to scroll down, but it will zoom in/out instead; the long press menu will show up in a random spot persistently; -or- the screen will be completely unresponsive.
When this happens - I turn of the screen, clean it, turn the screen back on, and I'm good to go (note: sometimes I cannot even see any smudges where I am having issues).
This happens to me FREQUENTLY when i use the tab outside during humid days. I am thinking a screen protector may help, but still havent gotten one to try it out.
I had this same problem before the touch screen completely stopped responding on me.
For mine it only happened after waking it up from sleep mode though. When I turned Timeout to Never the ghost touching stopped.
Well tried as suggested the cleaning of the screen and all that but it still did it so took it back to the store got lucky and they still had one left, and exchanged it. New one hasn't had any issues at all. Thanks all.
I just took mine out of the box for fun (it was packed up for rma) and when i turned it on the touch screen worked. The ghost touching stopped to. But i still have a strip from top to bottom on the right side of the screen that registers two touches . So ill probably still send it in for a replacement.
Related
Hi,
The touch screen part of my universal has ground to halt to the point that it won't work.
There doesn't appear to be any cracking and I don't recall dropping it or sitting on it.
I work a fair bit outside and can get quite a bit of dust and dirt in my pockets and am wondering if it could be due to dirt getting into the connect on the hinge.
Has any one else come across problems with the hinge?
I'm reasonably adept with a screwdriver - are there any things to watch out for when disassembling to check it over?
Hi..
If u can open with the Universal guide posted in the forum then try clean ing the connectors on the Right and Left of the Clamp Shell part with Iso Propyl Alcohol.
Before opeining you can try pressing mildly with yr fingers, at all the forur corners..it can start working..else do the above...
Hi,
OK, the screen seems to be working OK this morning, however I seem to be getting a sort of ghost effect where it appears as though the phone icon and the volume icons are getting pressed resulting in the volume controls and the phone/flight mode popup appearing on screen.
I guess it is all down to dirty connections.
Do you have a link to the thread about dismantling the hinge, I can't seem to find it.
Thanks.
re isopropal alchol
only use 99% alchol to clean contacts anything below that can cause corrosion on printed circut boards and contacts.
any progress yet.
mine stopped working today too.
but when i took off my screen protector, it worked for a while.. now its dead again.
I think the screen protectors may cause this problem, as I too had this problem with a screen protector; but when i took it off it would work and and off. I cleaned the screen up and after a few hours my screen was working again!
being in Australia I go to the beach allot. with my jasjar.
the sand gets stuck in the sides of the screen putting pressure on the screen and disabling any input. just a thought that it could be the same with u.
hope u sort it out, otherwise claim it on warrenty sooner than later.
The problem I have with the screen is that occasionally the touch screen side of things appears to stop working and also the the volume, wifi and phone dialogs keep on appearing as if I am pressing the relevant icons in the top bar.
I'm guessing some dirt has got into it somewhere or there is a loose connection, but am struggling to open up the screen's case to inspect it.
6680abhi said:
I think the screen protectors may cause this problem, as I too had this problem with a screen protector; but when i took it off it would work and and off. I cleaned the screen up and after a few hours my screen was working again!
Click to expand...
Click to collapse
i took off my screen protector and it worked an hour...
got home, prepared to go to the T-mobile store.. then cleaned my screen ( without protector ) with a small cloth and it was working again.. so weird..
lets wait and see what happens ..
It's not really that weird: If some dust, or something equally small gets between the screen and the plastic frame, it can put enough pressure on the screen, and so the touch screen takes it as a constant (or intermitent) input, invalidating any other action on the rest of the screen.
I just received my Aquapac waterproof (and sand/dustproof) to use my Jasjar hapilly in the beach! :lol:
oh so annoying, my volume sliders keep popping up now..., as if some one keeps tapping, cause when not in Land scape mode when i open the "START" menu. it scrolls down, the same input/tap as wher the volume is in Landscape mode
There must be something wrong ... my screen still isnt working properly
one possible solution for touch screen not working
guys.... although I dont need to register onto this portal and it took me 15 minutes to register (fault of my own) but I got so much relieved with the solution that it deserved 15 minutes of my effort ;-) I hope it helps someone...just like it did help me....
I own a P835 Asus mobile and from past 2-3 days was having problems - start menu continuously appearing and my taps not getting recognized. Since yesterday my screen suddenly stopped responding to any taps or scrolls altogether.... buttons were working fine but not the screen..... i spoke to the facilities centre this morning and was about to take it to the shop but due to my laziness...didn;t go.....
Thanks guys.... what you mentioned above is very correct.... it was just a tiny molecule of dust that the screen was interpreting as my input and finally refusing all my taps..... I just cleaned the screen and the speaker side with the mere stylus n things started working.... thanks a lot.... more than laziness was this worry cause I just bought this piece a month before....
so people...before takin it to the shop....try this one too.....huhhh.....
Anyone else having their touch screen stop working property until they have to reboot? It's like it gets way off on where I'm actually clicking.
I have experienced that, but only after I had flashed the modaco rom. I basically returned to stock firmware this morning and am having to re-root my phone...
I have had a couple of occasions where it doesnt seem to respond correctly.
For me its like it looses the calibration, seemed to noticed it when the device is tilted horizontally.
reboot sorts it, only happened once or twice though.
If the phone is in your hand, make sure your other fingers aren't curling over the screen around the edges to much.
I noticed this happening, and backed my fingers off around the edge of the screen and it started working fine immediately.
I think the screen is just extra sensitive.
Curious if that helps.
-James
jmacdonald801 said:
If the phone is in your hand, make sure your other fingers aren't curling over the screen around the edges to much.
I noticed this happening, and backed my fingers off around the edge of the screen and it started working fine immediately.
I think the screen is just extra sensitive.
Curious if that helps.
-James
Click to expand...
Click to collapse
I read somewhere (maybe on this forum even) that non-multi-touch systems have this problem. Have the same issue with my HTC Magic, but after a while you learn of a way to use the device single-handed while not touching the screen.
I dont know if this helps or not but I have no idea what you guys are talking about
JoshHart said:
I dont know if this helps or not but I have no idea what you guys are talking about
Click to expand...
Click to collapse
The calibration problem (the screen registers a wrong spot than where you touched) comes up if you try to use a non-multi-touch phone single-handedly, so part of your palm (between the thumb and index fingers) touches the edge of the touch screen. Especially if you are trying to reach a top area of the screen while holding the phone with just that hand, likely some part of the palm touches the bottom of the screen.
If you want to try having the problem, you can touch the edge of the screen with a finger and try to click a link with another. It won't register the right spot.
Supposedly the problem should go away as soon as you lift that body part up from the screen.... so I don't know if this helps the OP or not.
same issue
http://forum.xda-developers.com/showthread.php?t=615711
does not look like its happening all the time. Ran few tests and still can't duplicate the problem in order to find the cause. so far this happened about 3-4 times on my phone.
i hope this gets resolved soon and that its not the touchscreen issue.
jmacdonald801 said:
If the phone is in your hand, make sure your other fingers aren't curling over the screen around the edges to much.
I noticed this happening, and backed my fingers off around the edge of the screen and it started working fine immediately.
I think the screen is just extra sensitive.
Curious if that helps.
-James
Click to expand...
Click to collapse
I've had this exact thing happen to me a few times. I notice the tip of a finger on the edge of the screen, move it, then it works fine right after. Sometimes happens with the base of my thumb hitting the bottom left corner too.
Just make sure you're not accidentally touching any of the touch area and it'll work fine.
same here
i have just created new thread, this one wasnt here when i first looked http://forum.xda-developers.com/showthread.php?t=616418
mods, could you please link togther posiibly.
also there is google help forum where this issue was raised http://www.google.com/support/forum...ff&hl=en&fid=2a024bb25d4496ff00047cead2b2c2ad
would be nice if everyone experiencing this post it to google thread
HTC support #
866-449-8358 7 days a week 6am EST to 1am EST 7 days a week
Touch Screen Stops Working
jchap2k said:
Anyone else having their touch screen stop working property until they have to reboot? It's like it gets way off on where I'm actually clicking.
Click to expand...
Click to collapse
I have had this same issue on my G1 as well a N1. This problem only happens from time to time, as happes with stock ROMs and custom ROMs.
For the N1, I was initial pulling the battery; however, I have found that if I hold the power button down (don't let go) and then touch the screen to unlock or power if off.
I have a friend with the Eris who was having the same problem; Verizon released a patch earlier in the week that seems to have solved the problem for him.
Jeffro
jhales said:
For the N1, I was initial pulling the battery; however, I have found that if I hold the power button down (don't let go) and then touch the screen to unlock or power if off.
Click to expand...
Click to collapse
You can perform a soft reset on the Nexus One by holding volume down, the trackball, and pressing the Power button on top. A half second later, your phone will reboot.
I am also having these touch screen problems, and I can confirm I am not touching any other part of the screen to have it interfere with the non-touch-screen interface. I been testing with what people has been saying on here with having any other part of the screen being pressed, so I have been testing it out and I can say its a different response then what I'm experiencing.
Here is what is going on with my nexus one:
1) it happens at random times (my device is on my table and I am pressing buttons with one finger)
2) it only affects the bottom-left portion of the screen when it happens, touching everywhere else is fine
3) it thinks I'm pressing an area around the soft keys, an example is if I press 'A' it thinks I press either the '?123' or the 'back' button, same if I press 'd' it thinks I'm pressing the 'menu' button.
I can conclude that since not all nexus one owners has this problem it is a device issue, which what is going on is probably the same as if someone was accidentally pressing a part of the screen, but it could be part of the device is assembled incorrect or deformed. The physical form of my phone is off on the right side, I can feel the gray plastic part next to the black border next to the right of the screen is a little more raised then the left side.
But there is my experience with whats going on to me and my two cents.
Ive had this a little bit on my device as well, but I think it's a software issue since it went away when I pressed the home button.
edit:
Also it has happened exclusively in Dolphin browser
here too
Sporadically, it happens with my N1 as well. When pointing at the middle of the screen (in a list for example), the input registers 2 cm below my fingertip. Rebooting fixes this temporarily but it is annoying.
A SW update could perhaps cure this behaviour?
rgds
Daniel
I just had this happen for the first time, all my presses were registering way below where i was touching, tilting into landscape in an app then back to portrait fixed it for me.
So now it happened to me too. I have the Nexus One for almost two weeks and I never had the unresponsive touchscreen. Of course I noticed that the center of the softbuttons is shifted upwards and that they don't register very well in the middle where they should and I had the problem before that the sms text input box didin't registered in the center so that the keyboard wasn't popping out but that is all only a problem of adjustment. Today in the morning after my phone was on standby over night I put in the charger to charge it and I got an email with pictures. I scrolled through the email and all of a sudden the screen became totally unresponsive. I tried to scroll and the screen registered at a complete different place. All of a sudden the email was gone because the phone registered the delete button even though I never pressed it. I could close the gmail program but I had a hard time to scroll between the home screens and the live wallpaper became unresponsive too. I decided to do a restart but I had a hard time to press the shutting down button because it was unresponsive too. This all happened not after heavily usage of the phone but after maybe 1 minute usage.
I am sure that I didn't touch another part of the screen when this occured because I realized before already that the screen becomes wacky if you touch it at two different places (lack of multitouch, so stupid to disable it). I hope that this is a software issue too. I can live at the moment with the 3G problem because it doesn't stop me from using the phone. The unresponsive touchscreen scares me more because because it becomes completely unusable.
i've noticed this with low battery. Twice its happened to me, the first time was when i first recieved the handset. and secondly was this morning when my phone was off with no battery again.
anybody want to leave their battery to empty out and try test if this is correct?
I've had this happen a few times in the ten days i've had the phone. I always make sure I'm not double dipping on the screen, and its easy to do since it will exhibit this behavior for a few minutes.
In my experience battery level has no effect on it.
A reboot always fixes the issue.
I figure it's software based.
Sometimes the touch screen is not responsive. I need to press screen at various places to get it work again.
Any idea why this is happening?
Due to ROM bug or Hardware issue?
It may sound funny but my TD2 is the same and after few checks I found a way to fix it..... You must look at your display in an angle and you can see that in the center is a spot which is darker than the other display, after this you must suck a little right above the spot and everything is back to normal....
use a duct tape to suck it
this might be caused by extra pressure was placed on the screen. I found out about this when I accidentally slept on my phone for a whole night
Is anyone else having problems with their touch screen?
It will occasionally become unresponsive, and other times will just start 'clicking' repeatedly in random spots.
I find myself having to turn the power off and on (via the button, not a hard power cycle) to fix the issue. Its starting to get annoying.
Anyone else?
Yes, I am getting the same thing but I've found that if I just turn the screen off and then back on it fixes the problem. I don't need to reboot.
You think this would warrant an exchange? or is it just how its going to be?
I've put several hours on mine, but haven't experienced this issue. I don't know, if this happened to me more than once, I probably would exchange it.
It was happening to me all the time. I had to get a screen protector and haven't happened since.
ryoojin83 said:
Is anyone else having problems with their touch screen?
It will occasionally become unresponsive, and other times will just start 'clicking' repeatedly in random spots.
I find myself having to turn the power off and on (via the button, not a hard power cycle) to fix the issue. Its starting to get annoying.
Anyone else?
Click to expand...
Click to collapse
gigadigit said:
It was happening to me all the time. I had to get a screen protector and haven't happened since.
Click to expand...
Click to collapse
Very good "solution" to what should be an obvious problem. The Nook Color has a *capacitive* touch-screen. If you get "junk/gunk" on the screen, it's gonna cause you issues. I find this to be the case while holding my NC and playing Flight Director for a while. The issue: My hands become sweaty and as a result of the slight film of sweat/oil on the screen, the NC's ability to measure the capacitive changes on the screen (and react appropriately to them) is compromised.
Keep your screen clean and you won't have this issue.
Note: after you wipe the screen down (damp cloth, etc), you will need to click the power button and go the lock screen and then back into the NC before it works right directly after cleaning the screen. The dampness of the cleaning cloth throws up the calibration enough to cause very strange things. My experience with "correcting" this issue tells me that in some way, the NC is recalibrating itself when you go to the lock screen.
johnopsec, this has been my experience as well. After cleaning the screen from finger-jam i don't get the phantom clicks. I also noticed that because I live in a very humid climate (Florida panhandle) there will be a thin moisture layer buildup sometimes and it really helps to wipe this off. I also have an incredible that does not have this problem but it has a screen protector which, I am guessing (and as gigadigit expressed), fixes the problem. Just make sure the screen is clean and dry before applying!
screen response
Also,
If you are holding the side of the case by the screen this throws off the touchscreen, I was having the issue where it would be clicking and multiple letter inputs when typing.
Also when it is laying flat and you have the power cord plugged in you may get multi letter inputs.
The trick, hold it by the back not the sides.
and if you have it plugged in and need to type don't leave it laying flat.
I have experienced this problem and loosely seen it correlated with moist fingers.
no moist fingers here and on my 2nd nc. this ones starting to have the ghost touches too.
My Nook Color started acting up after paying levels 3-4 to 3-6 of Angry Birds. I'm not sure if Angry Birds caused the issue or not as I haven't gotten it to do it in another app. I'm running 1.4.2. Doing a lock and unlock fixes the problem until it returns.
I managed to get Phone Tester to run after it got into this state. I made a video of it using a crappy webcam. There's a stuck finger in the corner.
youtube.com/watch?v=OdcVG-Q8LS4
Touch Screen issues while unit is plugged in..
It seems I have read on some forums that some people have screen issues.
Personally I didn't experience this until I tried to use my NC while plugged into it's wall charger.. It seems to act as if it has a grounding issue, which is not the case when the unit is unplugged.
So when you are running your multitouch or touch tests, do it without the unit plugged in..
-CC
I have had the same problem with my touch screen. I have the nexus live wallpaper and whenever you touch the screen it sends off the animation. Well sometimes it just goes non stop and sometimes opens up the window where you can apply a widget. I guess the most practical solution would be a screen protector but if not ill restore it and send it off to B&N
There's a small little app in the market named "Nook Screen Recalibrate" this app is super simple and easy to use. I hope this helps
https://market.android.com/details?id=com.assid.android.nookrecalibrate&feature=search_result
Here is the issue I have...
Right is the N button side. Just a reference point for this.
Reboot the Nook (I use CM7).
Bring up the keyboard
Touch Q in the center - you get W.
Touch Q on the right - you get W
Touch Q on the left - might get Q but you usually get W.
Recalibrate using the Nook Screen Calibration (above).
Q now gives Q unless you press on the right side of the key. I also notice I still have to hit the back arrow more to the left or I bring up the keyboard.
I've learned to live with it, but the left side of the touchscreen is slightly off and you have to touch to the left side of any object on the last 1".
Awats said:
Here is the issue I have...
Reboot the Nook (I use CM7).
Bring up the keyboard
Touch Q in the center - you get W.
Touch Q on the right - you get W
Touch Q on the left - might get Q but you usually get W.
Recalibrate using the Nook Screen Calibration (above).
Q now gives Q unless you press on the right side of the key. I also notice I still have to hit the back arrow more to the left or I bring up the keyboard.
I've learned to live with it, but the left side of the touchscreen is slightly off and you have to touch to the left side of any object on the last 1".
Click to expand...
Click to collapse
yeah, for me it's the edge of the screen along the right side. it's less sensitive then the rest of the screen. I found that calibrating 2-3 times really works best.
There's also a fix in the nookwiki, but i can't get my adb to work on my laptop, I think its the drivers.
http://nookdevs.com/Recalibrate_the_NookColor_touch_screen
What is the left and right side?
I should have said that left is the side opposite the N button.
I downloaded Multi-Touch Screen from the market and I can see part of the problem is the angle of my finger. Straight on it's better.
Nook Color Touch Screen Problem
Having similar problem as described, after two years. Extended warranty expired ... two weeks ago (of course).
Tried cleaning screen, no help. Have not tried screen saver yet, but will.
In the meantime, I notice the comments about touching the sides, and I noted that as well.
Is it possible that this could be helped by opening it up and re-seating the case? Has anybody tried this?
I've searched a good bit and wasn't able to find any information regarding the exact problem I'm having.
Bought a used G6 for starters
No water damage indicated by the sticker
The phone works great on the home screen and app drawer
I turned on dev mode to show touches
When you're in the camera it will stop responding to touches, you can still take pictures using the side buttons. The screen will become responsive again after a couple minutes. This whole time you can take pictures and the screen is functioning just not responding to touch
This happens also when you're loading web pages, even a Google search the screen will stop responding to touch and then eventually start responding again for a short while till you load another page or start moving around the page too quickly it seems. However again the screen is functioning, video previews are playing, just no response to touch.
Loading a game like Asphalt 8 the phone doesn't respond to touches until a couple minutes after the game has been fully loaded.
Even after a hard reset/factory reset the screen will sometimes be unresponsive upon the initial welcome/setup screen and then it will become responsive and you can go through the whole setup without an issue.
Any insight? Any suggestions? If I can't figure it out I'll just get rid of it but it's in great condition a shame it just doesn't function properly.
Thanks in advance!
Looks like some sort of hardware issue...
But before you start to worry...
This might sound like a stupid question but have you tried cleaning your screen with some cleaning solutions?
Sometimes dust mixed with dried sweat can cause severe touch responsiveness issues even if the screen looks like it's clean.
This is an older thread, but maybe I can help someone.
I replaced a touchscreen on a LG G6 and saw that the touchscreen did not work if the back cover was not mounted correctly and the data transfer between the phone and the fingerprint sensor was interrupted. This may be a common problem for users because the connector is small and the back cover is attached with a double-sided tape nearby this connector. It seems that the touch screen is disabled by the phone software without the back cover.
MaBaGeMiFlo said:
This is an older thread, but maybe I can help someone.
I replaced a touchscreen on a LG G6 and saw that the touchscreen did not work if the back cover was not mounted correctly and the data transfer between the phone and the fingerprint sensor was interrupted. This may be a common problem for users because the connector is small and the back cover is attached with a double-sided tape nearby this connector. It seems that the touch screen is disabled by the phone software without the back cover.
Click to expand...
Click to collapse
Thank you so much for this comment!
My gf phone had problems lagging and becoming insensitive to touch, the problem got worse and worse, almost never responding anymore. Performed a factory reset etc, didn't help.
After reading your comment I tried pushing on the back cover while swiping. Now I'm able to revive the phone after pushing hard on the top and bottom left corners, of the back cover.
Thanks a mille !
Lg g6 has back panel from glass and under it you have contact for fingerprint sensor.Somehow if the back panel is loose it can cause touch fail,and you cant use the device touch function!
--->FIX:
So you will have to turn screen off using back button,and then try to press back glass on left and right side of the camera lens !
Then simultaneously press the power button and try to use the touch .
If it does not work tru again around camera lens and turn off screen each time you press the back glass!
For me it worked !