Database Users

My HTC Magic Stuck in RUU Screen after failed ROM upgrade

Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuck in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.

If you have constant security S-OFF, it accepts all ROMs and HBoot and RUU. Probably you have engineering Magic (not Hboot, the whole device)
1. Try this...
If fastboot can detect phone, so try flash Amon_RA Hero recovery http://forum.xda-developers.com/showthread.php?t=561124
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
2. Or try run another RUU

5[Strogino] said:
Oh... you have S_OFF after official upgrade, it isn't often to meet.
If fastboot can detect phone, so try flash Amon_RA Hero recovery
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
Click to expand...
Click to collapse
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?

ngecw said:
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
Click to expand...
Click to collapse
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X

5[Strogino] said:
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
Click to expand...
Click to collapse
Tried flashing the recovery.img (RA_Hero) but failed.
i typed fastboot flash recovery recovery.img [ renamed the file to recovery.img] but got the error...
sending 'recovery' <3362 KB>... OKAY
writing 'recovery'... FAILED <remote: image type not support>
Just to clarify more, the screen only shows "RUU USB" not "FASTBOOT" although fastboot can see my device... could that be the reason why it failed?
According to your 2nd suggestion, where can i find other RUU and how do i know which is the proper one?

ngecw said:
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuch in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
Click to expand...
Click to collapse
the rogers ROM is not working right. Too many crashes and so on .. so try this one
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
You can download it from HTC main site ...
Also, you have to keep in mind that you can RUU as many as you want. So do the procedure again and keep us posted if it's working. If not send me a PM and i'll resolve it step by step.
best of luck !

I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?

ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I do have the same problem with my RUU flash with the new Rogers RUU. Stuck at 81% when device starts updating at step[4] "system". Phone will show "unzipping" for over an hour and eventually failed with error code [155].
I tried the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_ NoDriver.exe but still the same problem. Can anyone help here?

Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!

Help
ngecw said:
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Click to expand...
Click to collapse
Same problem here. Can someone help?
Thanks in advance.

ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I had a 32B G2,it was brikked at the first time when I ruu flash the rom(Sense official). G2 couldn't received any RUU rom.it would stop at 22%.
Today,when I ruu flash the rom（HTC_Europe_3.04.401.2）,I also found it stop at 81%.
SPL is updated to 1.76.0008 from 1.76.0007.
It seems much better than before. But it still could not accept the cmd "adb shell"
Hoping somebody could help us.

I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.

Rugga said:
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Click to expand...
Click to collapse
I tried but already got stuck in the first step of unzipping system.img. Looks like this RUU will upgrade system first before HBOOT and RADIO, hence i am still stuck with Perfected SPL.
Given that my phone has security off (SOFF), is there way to downgrade my HBOOT?

I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!

vbucuroiu said:
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
Click to expand...
Click to collapse
Were you upgraded to the latest perfected SPL when the same problem happens? I had my goldcard configured properly, but everytime i run RUU, the process hang at 81%, which is the time when unzipping system.img happens.
I understanding the latest SPL is still yet hard to crack, but will my phone being S=OFF, can have some ways to get the system check bypassed?
Thanks!

Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.

(
Nobody knows?

ONX said:
Nobody knows?
Click to expand...
Click to collapse
Same boat...

ONX said:
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
Click to expand...
Click to collapse
What did you do??? 32B Magic not compatible with RUU Upgrades
What exactly do you have? You posted in one place - that you have 32B
But on picture you have 32A

I installing RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
I make a goldcard for installing _HTC Magic_RUU_Sapphire_SMC_Voda_WWE_3.03.990.6_release_signed_NoDriver.exe (with this update can enter in fastboot and vol down + power) but stops when loading system.img
Sorry for my english.
Yes, i have 32B.
Before:
SAPPHIRE PVT 32B Ship S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD 10
RADIO-3.22.20.17
Jun 2 2009 17.28.28
After:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.007 (SAPP10000)
CPLD-10
RADIO-6.35.07.29
Aug 4 2009, 19:43:30

[32A]HTC MAGIC SENSE ROM [HELP needed in flashing and rooting]

SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007
CPLD-12
RADIO-6.35.07.29
Android 1.5
listed is my phone details. i have tried every single method found in the forum to root my phone or flash into a new rom but it just all doesnt work.
I have previously update the HTC ROM [HTC Sense] Version: 3.03.707.5 a few months back.
1. I have tried this link by using the rom1.zip copied from the temp when running the Official RUU Sapphire HTC Europe AT test signed. but it failed.. Wrong model CID i think..
*If you have ENG SPL 1.76.2007 you can simply unpack only rom.zip without new HBoot and radio and flash directly*
forum.xda-developers.com/showthread.php?t=625108
2. I have tried using using the rom1.zip copied from the temp when runing the RUU_Sapphire_HTC_Asia_WWE_3.03.707.5_R_SG_release_signed_NoDriver.exe but everything is same and the flashrec or fastboot method all failed..
2.1 I have tried using a flashrec and recover image to root my phone
but i received backup failed and was not able to flash the image too..
theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
2.2 fastboot method when fastboot devices indicate the devices serial no. but when i try to fastboot recovery .. [failed : remote not allow is the error]
2.3 when i tried adb method.. it just failed too
I am lost and i hate the new sense rom i updated few months back.. before that i did flash the hero rom before i changed to the new sense rom..
i read some post saying that the new sense rom will block all ways to root or flash new room.. but some post said that with a gold card created, it will overcome that.
Please i have been reseting my phone for the whole week now.
Please guide me to the light.. Awaiting for some enlightenment~

[FIXED] Please Help, Urgent!

Ok Guys, I know there are probably millions of threads already started about this, but I really dont know how to put it.
Not long ago I flashed the official 2.2 ROM, and tried to flash DSP manager over it. It didnt work. I couldnt boot into the rom, I had a weird SPL and radio and stock recovery. I made a goldcard, downloaded a SAPPHIMG.nbh file from god knows where, and started again. I have a horrible feeling it might of been the rogers 32A rom.
BUT, I am now stuck on 1.5, Rooted with Super One Click and I cant boot into recovery at all. I cant flash recovery through Clockworkmod, or FlashRec. It flashes it, I just can't boot into the recovery at all! I can't even do it through fastboot, because of my perfected stock SPL. A goldcard doesn't help either, I just keep getting errors. Is it possible to corrupt your recovery partition?
RADIO: 3.22.20.17
CPLD: 10
HBOOT: 1.33.0009
I feel like I'm in a really horrible situation here, but I'm glad its not fully bricked. What Solutions are there to this problem?
Thank you so much guys! I really appreciate your help, in advance
EDIT: I can use fastboot, But I still cant boot recovery, even after flashing it from there. Can I just flash a rom through Fastboot?

Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.

mumilover said:
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
Click to expand...
Click to collapse
That would be good, If I didnt just wipe the system via fastboot thinking I could just flash another rom..

Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?

mumilover said:
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
Click to expand...
Click to collapse
I Followed this guide.. http://www.firstdroid.com/tutorials/htc-magic-sapphire-tutorials-htc-magic-sapphire-guias/how-to-load-a-rom-with-fastboot/comment-page-1/#comment-3486 I get a error saying the recovery isn't signed. Latest version of Amon RA.

Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).

mumilover said:
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
Click to expand...
Click to collapse
Ok, will try that

ketchup539 said:
Ok, will try that
Click to expand...
Click to collapse
Ok, Tried flashing an RUU, would't let me, because the phone had to be switched on and booted into android to do so. I have tried the goldcard more than 8 times, either to get a "main version is older" or "invalid CID" message. What else can I do? Have I effectively bricked my phone?

NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!

Can you also please change the title... it's not that urgent :0)

mumilover said:
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Click to expand...
Click to collapse
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.

same boat maybe different scenary, stuck RUU or RUU USB:
Code:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.

ketchup539 said:
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
Click to expand...
Click to collapse
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.

meupc said:
same boat maybe different scenary, stuck RUU or RUU USB:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
Click to expand...
Click to collapse
You have a different problem... you have wrong spl/radio combo.
But maybe i will test something. Check your pm!

OK, thanks mumilover, replied and added.

mumilover said:
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
Click to expand...
Click to collapse
Fixed! I was on a 32A sappimg.nbh, flashed 2.53.707.2 sappimg.zip which was also 32A, but it booted (!) and from there I was able to flash the original mytouch COC10 cupcake. I ugraded to donut, then flashed the official 2.2 OTA
Thanks for your help

Android install from scratch

Sorry for my Engish, but this isn't native language.
Hi, I have HTC Magic:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP10000)
CPLD-12
RADIO-6.35.16.19
My friend updated this phone with errors. Now I can run it only in RUU mode. PC found a phone and I can connect by fastboot and turn-off phone (by fastboot oem powerdown), but I can't load any recovery..
I tried official RUU installer, but there say that I must download other version.
I tried boot few recovery, but nothing happend when booting .
I tried also downgrade radio or SPL, but I need working device.
There is any solution to bring to life a phone or this is brick?

When you are running RUU, it will create log in c:\ruu_log
Post it to review errors
Sent from my A7-040 using Tapatalk

I have this log:
dl.dropbox.com/u/198217/ruu_log.html

numman said:
I have this log:
dl.dropbox.com/u/198217/ruu_log.html
Click to expand...
Click to collapse
Ok. According your log info...
- Your phone has label 3.54.631.3 ROM (but probably does not have system image with this rom)
- You tried to install ROM that has lower version than 3.54.631.3 (remote: 43 main version check fail)
- It is main problem if you have not canadian rogers phone
1. You need create goldcard (search on xda for manual)
2. With goldcard you can successfully install 3.54.631.3 RUU and your phone will work.
3. After that if you want custom you can get root (use SuperOneClick), flash custom recovery (AmonRa 1.6.2 patched by cursordroid or HTC Hero recovery), then flash hboot 1.76.2007 and custom ROM via recovery...
p.s. if you have additional questions, you can always write me in PM...

HTC Magic stuck at Vodafone screen - only fastboot - no recovery

Hi there,
i have a HTC Magic here. When starting up it get's stuck at the Vodafone screen. I can't enter the recovery-mode.
I'm able to enter hboot and fastboot - the screen shows the following:
Code:
*** UNLOCKED ***
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0014 (SAPP10000)
CPLD-10
RADIO-6.35.08.29
I thought 32A is H only, and 32B is G? :silly:
Code:
fastboot getvar version-main
version-main: 3.12.0.0
While in fastboot-usb-mode i can see the phone on my pc (i used the android-sdk-driver, now my phone shows up as "Android Bootloader Interface") with:
Code:
fastboot devices
MB2********* fastboot
but it doesn't show up here (while phone is in hboot-mode or fastboot-usb-mode):
Code:
adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
NBH-files on the sd-card are rejected with "Main version is older". Any command for flashing or booting with fastboot end up in "command error" or "remote: not allowed" or something like that.
Most recovery-tutorials say that i need adb and fastboot - but as i said adb doesn't work. Other tutorials say i need a NBH-file, but all of those are rejected with "Main version is older". I also tried some sappimg.zip-files, but the phone shows up an error-message for a very short time ("wrong zipped...", i'm not able to read that so fast).
I also got a goldcard, but this didn't change anything.
Code:
fastboot getvar cid
cid: VODAP102
Is there any help for me and my phone (step by step with needed files)? :laugh:

I've got the same problem. It's been almost a month now and still no luck.
Did your problem start when you unlocked your bootloader? That's when mine started.

It was the phone of a friend of mine and it already worked with some custom rom. But (if i understood right) he erased everything with fastboot.
I don't know if this is really version 32A, because "G" should always be with 32B. The other thing is that the phone is from Vodafone Germany, but in Germany there normally is no 32A - it's only 32B. That's why i don't really know which files to use for the phone.
Did you already make your goldcard? And if so, do you know if it's working?

I still have the goldcard I originally used to put cyonogenmod on my phone, but it's not working now. I bought a new sdcard and made a new goldcard but it won't work either.

try to remove the battery for 5 mins, when is removed click some times power button; reinsert battery and try to go in recovery.... i had same problem and i solved with this method

@ dante96: No, that's not working for me - still just get the Vodafone screen. I think that everything on the phone was erased and without recovery on it i won't be able to recovery-mode, am i right?
Yesterday something weird happened. I just tried a
Code:
fastboot reboot-bootloader
and i got a lot of output - about CID, SuperCID, device-number, partitions and whatever, but i hadn't the time to copy that or try other things.
I tried that command again later and just got "remote: not allowed". It seems like i missed a chance to recover the phone yesterday. :crying:

Ok, what i know right now:
My phone does take sappimg.zip after command:
Code:
fastboot oem lock
BUT:
My phone is not 32A as shown, it's 32B - i can't flash files for 32A because of "Lack of heap", so the files seem to be to big to unzip to RAM.
That's why i can't flash 3.54.527.6 BrightStar Brazil or 3.54.631.3 Rogers Canada to get it running.
For 32B there is only one official rom higher than 3.12.0.0:
3.12.531.1 T-Mobile USA FRG83D
Tried to flash this one, it's updating boot und bootloader but after unzipping radio the screen turns black and nothing happens - tried it 3 or 4 times right now.
This got me from:
Code:
*** UNLOCKED ***
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.00[COLOR="Red"]14[/COLOR] (SAPP10000)
CPLD-10
RADIO-6.35.08.29
to:
Code:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.00[COLOR="Red"]13[/COLOR] (SAPP10000)
CPLD-10
RADIO-6.35.08.29
And i know that my Goldcard is correct - with another SD-card i just get "wrong model id" with the sappimg.zip mentioned above (3.12.531.1 T-Mobile USA FRG83D).
Does anyone have an idea what to do next or why screen turns black?
Some of the official roms for 32A are splittet into one 10 MB and one 90 MB file (for example this one "RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe"), i think i could flash those - BUT i can't find those files for 3.54.527.6 BrightStar Brazil or 3.54.631.3 Rogers Canada. Anyone does?

Can you get those files from the temp folder?
5[Strogino] said:
1. Run Ruu
2. Don't flash, but go to temp folder and search for rom.zip or nbh-file
3. Rename to SAPPIMG.ZIP (if zip) or SAPPIMG.NBH (if nbh).
4. Place file to root it sdcard. Exit from ruu.
5. Turn phone off, then turn on by pressing and holding volumedown + power
6. Phone will start into hboot-mode and search for rom. Then it will flash.
Click to expand...
Click to collapse
Check htcdev.com under the unlock bootloader section for files.

Got mine back to life.
I flashed SPL 1.76.0013 from htcdev.com (Vodafone generic) and tried to install "3.12.531.1 T-Mobile USA FRG83D" again. With this SPL he managed to flash the radio but aborted afterwards.
Back on 1.33.0013 i tried the same rom again, now he flashed all of it. The phone is working so far - now i have to try to get a non-perfect SPL on it and afterwards a custom rom...
Code:
sapphire pvt 32b ship s-on g
hboot-1.33.0013 (sapp10000)
cpld-10
radio-2.22.28.25

Was the Bootloader locked or unlocked when you got that to work?

I flashed the SPL from htcdev when it was locked. Then they sent me an unlock-token which i just tried, so it was unlocked afterwards.
But i think i had to lock it again with
Code:
fastboot oem lock
to let the phone take those sappimg.zip without error.
Now i'm stuck again - i want Cyanogenmod on the HTC. But i can't get a non-perfect SPL with update.zip on it (and also no engineering SPL), in recovery-mode it just says "E: Signature verification failed - installation aborted" - but those SPL are signed.
Looks like i have to read some more.

Did you rename the engineering SPL to sappimg.zip and try it in HBoot?

matzehtc said:
Now i'm stuck again - i want Cyanogenmod on the HTC. But i can't get a non-perfect SPL with update.zip on it (and also no engineering SPL), in recovery-mode it just says "E: Signature verification failed - installation aborted" - but those SPL are signed.
Click to expand...
Click to collapse
No, copied it to SD-card and renamed it to "update.zip". Then i bootet in Recovery-Mode with Home+Power and applied the update.zip from SD-card. This gave me the error from above.
I think the phone won't take it in hboot when it's renamed to sappimg.zip.

If you SPL is perfected you need to follow these instructions
1. Create a Goldcard.
2. Copy the required sappimg.nbh/zip to the Goldcard.
3. Boot your phone while holding the VOLUME-DOWN key.
4. Press the ACTION KEY (=trackball) to start the update.
5. Wait until the update completes and press the ACTION KEY (=trackball) to reboot your phone.
6. (Upgrade to the rooted ROM of your choice).

That didn't work, because my main-version was to high.
I rootet the phone with this tutorial and got the recovery on my phone.
Afterwards i installed an engineering SPL in recovery-mode. With this i got back to "1.91.162.1 Vodafone Germany DRC92".
I rootet the phone again with the tutorial above and installed Cyanogenmod.
Everything working fine! :angel:
Code:
sapphire unknown 32b ship s-on g
hboot-1.33.0007 (sapp10000)
cpld-10
radio-2.22.19.26I
Code:
fastboot getvar version-main
version-main: 1.91.162.1

Good to hear you got it working.
I got my mainver from 3.12.0.0 to 3.57.0.0 by getting the file from the temp folder but it didn't really help me.
I think the problem must be the goldcard. I'll try borrowing my Dad's phone this weekend and see if I can fix it.