First off I'm a complete noob at rooting and installing custom firmware on phones - I completely messed up installing CM on my G1 and so I gradually restored it to vanilla 1.6. Have recently fallen back on it since my Desire Z died (*sob*) which was dainty compared to the rock solid G1 so I thought I'd make the most of it until I find a suitable replacement.
Have seen 2.3 GB running on it in some youtube vids, CPUs were overclocked to try and cope with it though since its not designed for G1.
Any suggestions for custom ROMse? If possible please provide the guides for them too. Am with UK T-Mobile if that helps at all.
Thanks in advance.
senselx
froyo by lazslo
xillius donut
The COS-DS ROM is pretty nice. The Gingerbread kernel was modded for the Dream/Sapphire by ezterry. There are a few small bugs but it's snappy even with the default ADW. If you have a recovery image installed then it's no trouble installing the ROM, just toss the ZIP on the SD card and use "install ZIP from SD card" from recovery.
Related
Hey guys,
I recently rooted and flashed my Dream to run CM6, but I'm very unhappy with the delays and lag I get trying to running Adroid 2.2 on this old phone.
I wanted to go back to the stock Android, 1.5 or 1.6, can't even remember.
Just wondering if anyone had a tutorial on how to do this?
Thanks in advance
May I recommend to try something before going back to the stock rogers firmware.
Try the release of the stock mt3g firmware: http://forum.xda-developers.com/showpost.php?p=8676013&postcount=1
(Remember the ebi1 portfile)
There are also various roms based on asop (Google's stock) 1.6 with root that you may find better than rogers stock.
Also firmwares like biffmod try to make cm6 more efficient with a good amount of success.
Otherwise if nothing works out you just reflash the e911 update http://forum.xda-developers.com/wik...Branded_EBI1_Dreams#Returning_to_Stock_Rogers
Also consider trying Super D. Its a Donut ROM that has many nice features and it is very fast.
http://forum.xda-developers.com/showthread.php?t=613809
An update may be comming once it reaches 1 million views!
EBI1 Port:
http://forum.xda-developers.com/showpost.php?p=8663984&postcount=996
EBI1 Ram Hack Port:
http://forum.xda-developers.com/showthread.php?t=645411
(incase you don't know, this will give your phone more RAM by taking some memory away from the graphics. So don't use this if you use graphically intensive apps such as games.)
Also try playing around with swap (compcache too but turning that off has always been best for me) to try to get the best settings for you. Super D is pretty fast so the best setting might just be completely off. YMMV.
ezterry said:
May I recommend to try something before going back to the stock rogers firmware.
Try the release of the stock mt3g firmware: http://forum.xda-developers.com/showpost.php?p=8676013&postcount=1
(Remember the ebi1 portfile)
There are also various roms based on asop (Google's stock) 1.6 with root that you may find better than rogers stock.
Also firmwares like biffmod try to make cm6 more efficient with a good amount of success.
Otherwise if nothing works out you just reflash the e911 update http://forum.xda-developers.com/wik...Branded_EBI1_Dreams#Returning_to_Stock_Rogers
Click to expand...
Click to collapse
I'm having troubles restoring the stock rogers ROM. I'm not sure how to flash the nbh file through fastboot. I tried downloading fastboot.exe to my pc but now an error pops up saying that AdbWinApi.dll is missing.. Please help?
Thanks!
check out the stickies
I figured it out... returned to stock yesterday.. re rooted but this time made a backup of my stock rom... foolish me..........forgot to do it last time
Lets face it...MDJ isn't coming back anytime soon (If ever!) and frankly he has left quite a few people that use his ROMS in the cold.
So, in my unsuccessful quest to find a replacement ROM, does anyone have any suggestions on a Android NAND ROM as a replacement for MDJs Gingerbread CM7 Roms?
If its not listed in the POLL, just post below and I will add it.
Never tried gingerbread roms for real before so I wouldn't know sorry. However from my past experience with JDMS Ultimate Droid, I would recommend you trying crawlingcity's Ultimate Droid 3.1
The build i'm using now is gauner's desire z build. Just sticking to Froyo until enough apps get updated to gingerbread.
I would suggest Ultimate Droid 3.01.
Fast clean and reliable I have not encountered anything that does not work.
Fast boot time takes about 1 minute.
Cheers..
For me this rom is allmost close to perfect:
skink Clean Desire v1.2
Stable, fast and nice . I like Sense. Thank you
MDJs_CyanogenMod7_v.2.6_NAND_A2SD+.
First off, this is my first post here, so hi everyone. After a few months with my unrooted Desire HD, I decided to root. I was hesitant mainly due to how complex the process was. I am with telus, which means I had to downgrade to a rootable firmware version (the Telus one isn't rootable for some reason). I needed to install a gold card for this. After this, I temp rooted and permanently rooted successfully. My first custom ROM is MIUI (freshly squeezed edition). I find it to be very fluid and fast and is definetly good looking. Its nice to see a ROM based on something other than stock Android or Sense. The software build that comes with this ROM (2.3.4) is also very fast, a huge step up from the laggy 2.2.1 software that Telus shipped with it.
Again, I am new and know very little about rooting and development in general, buy I plan to be using custom ROMs very often and I thought this site would be a good place to give feedback on custom ROMs. (I noticed you need at least 10 posts to access the developers forum).
The only problem I have with MIUI is that the messaging app constantly force closes.
Welcome ..
the 10 post limit is a bummer .. but you'll get there ..
Rom paradise will open soon ..
bellerophon90 said:
First off, this is my first post here, so hi everyone. After a few months with my unrooted Desire HD, I decided to root. I was hesitant mainly due to how complex the process was. I am with telus, which means I had to downgrade to a rootable firmware version (the Telus one isn't rootable for some reason). I needed to install a gold card for this. After this, I temp rooted and permanently rooted successfully. My first custom ROM is MIUI (freshly squeezed edition). I find it to be very fluid and fast and is definetly good looking. Its nice to see a ROM based on something other than stock Android or Sense. The software build that comes with this ROM (2.3.4) is also very fast, a huge step up from the laggy 2.2.1 software that Telus shipped with it.
Again, I am new and know very little about rooting and development in general, buy I plan to be using custom ROMs very often and I thought this site would be a good place to give feedback on custom ROMs. (I noticed you need at least 10 posts to access the developers forum).
The only problem I have with MIUI is that the messaging app constantly force closes.
Click to expand...
Click to collapse
Hey
I used to have a nice ROM installed with a kernel that allowed overclocking. I would run my shift at 1.5Ghz and was really happy. Then when Gingerbread was coming out, I decided to flash a Gingerbread ROM because I was just excited for 2.3
Now there were not kernels for Gingerbread ROMs at that time. So formatted/wiped everything from my device using Clockwork Recovery. Now here's where I have a few questions:
After I wiped the entire device, when my phone booted, it seemed to have 2.3 installed so I assumed that since there was an OTA update for Gingerbread, it must have gotten updated somehow. I want to find out whether I have a custom ROM with 2.3 installed or is it a regular Gingerbread stock ROM that's on my device?
I would like to find out what kind of ROM is installed on my device right now and do whatever it takes to be able to flash a kernel that allows overclocking, because going back to 800Mhz from 1500Mhz is just not doing it.
I would also really appreciate if someone gave me direct links to a custom ROM (since I understand at this time it is impossible to flash an overclocked kernel, since HTC has not released official Gingerbread source code yet) with a flashable kernel that's completely stable and allows overclocking to 1.5Ghz.
I really don't care about the whole Cynaogen Mod etc, because I use LauncherPro anyway and from what I understood when I was reading about Cyanogen Mod, it doesn't change THAT much other than adding a little bit more functionality and mainly focusing on changing the phone interface, which is completely irrelevant to me.
Thank you in advance.
sajmonides said:
Hey
I used to have a nice ROM installed with a kernel that allowed overclocking. I would run my shift at 1.5Ghz and was really happy. Then when Gingerbread was coming out, I decided to flash a Gingerbread ROM because I was just excited for 2.3
Now there were not kernels for Gingerbread ROMs at that time. So formatted/wiped everything from my device using Clockwork Recovery. Now here's where I have a few questions:
After I wiped the entire device, when my phone booted, it seemed to have 2.3 installed so I assumed that since there was an OTA update for Gingerbread, it must have gotten updated somehow. I want to find out whether I have a custom ROM with 2.3 installed or is it a regular Gingerbread stock ROM that's on my device?
I would like to find out what kind of ROM is installed on my device right now and do whatever it takes to be able to flash a kernel that allows overclocking, because going back to 800Mhz from 1500Mhz is just not doing it.
I would also really appreciate if someone gave me direct links to a custom ROM (since I understand at this time it is impossible to flash an overclocked kernel, since HTC has not released official Gingerbread source code yet) with a flashable kernel that's completely stable and allows overclocking to 1.5Ghz.
I really don't care about the whole Cynaogen Mod etc, because I use LauncherPro anyway and from what I understood when I was reading about Cyanogen Mod, it doesn't change THAT much other than adding a little bit more functionality and mainly focusing on changing the phone interface, which is completely irrelevant to me.
Thank you in advance.
Click to expand...
Click to collapse
If you just did a wipe and didn't flash anything, your still running the same ROM as you were before the wipe. If you go into setting > about phone > software information > more, this will tell you your current ROM (build version). If you would like to continue using Sense but want to overclock I would suggest MikShift 1.1, otherwise I would suggest the Shift Deck ROM. Both can be overclocked with several different kernels, just do a little reading through the dev section to see what best suites you.
Disregard, just typed what crump said but he beat me to it!
Hi All,
I am a new A500 owner and a long time Viewsonic G Tablet owner; I know why I put a Custom Rom on the G Tablet (Stock Rom Sucked and VS dropped support). However after playing with my new A500 for the last week I really can see no reason so far to put a custom rom on this tablet.
The stock rom rooted and a few extras added/fixed like...
GPS Fix
NTFS Mount
Rooted
CWM Added
have really made this a very stable and very effective rom. I have been reading through the forum and I see a significant number of custom roms out there. I am sure they are there for a reason however for the life of me I can not determine why I would want to install any of them. I do also understand that I am coming late to the game on this tablet as I am sure these were probably developed to fix deficiencies in the stock rom when the tablet was first released.
So can someone explain to me why I would want to switch to a custom rom today given the stability and fixes available for the stock rom?
This is not meant to be a dig on any individual, group or any dev of these roms; I know these folks do an outstanding job and I appreciate every single one of them. However for someone new to this tablet it would be great to know what makes the custom roms better than what I already have with the stock/fixed rom I am running. I am currently running;
Android Version: 3.1
Kernel Version: 2.6.36.3
Build Number: Acer_A500_4.010.11_COM_GEN2
This is a sincere question and I would appreciate not getting flamed or bashed for asking. This is in the Q&A section so I am hoping this is the right place to get the answers I am seeking.
" The only way to learn is to ask... so I am asking "
To me I think everyone installs custom roms for all diffrent reasons. Each rom has its own benefits and restrictions. I have tried a few and always go back to stock.
Good luck and flash with great Caution
erica_renee said:
To me I think everyone installs custom roms for all diffrent reasons. Each rom has its own benefits and restrictions. I have tried a few and always go back to stock.
Good luck and flash with great Caution
Click to expand...
Click to collapse
Hi Erica Renee,
Thank you for the quick reply... I was just not sure if there was a relevant issue that would persuade me to move from my stock rom to a custom one. I very much appreciate your response!!!
Rick
I'm coming from a Viewsonic Gtablet, and with the gtablet a custom rom was a must, here with the iconia I don't see any advantage to use a custom rom, Android 3.1 has everything I wanted. I only rooted it for ad-hoc support, but barely I use the ad-hoc, is only for emergencies, besides that, even rooting is not really necessary. Android OS backups all application settings, so each time I uninstall and reinstall an application, my former settings are there.
Just enjoy your Iconia
Frankly, I haven't felt the need to flash a custom ROM to the A500. I did root it to be able to use certain apps.
I have tried a variety of ROMs and kernels on my HTC EVO 4G, but that's because stock Froyo and even stock Gingerbread is boring. I think stock Honeycomb looks and performs great. It makes me really look forward to Icecream Sandwich.
I did add ADWLauncher to my A500, so maybe that's another reason why I haven't felt the need to flash a custom ROM.
i find myself in the same boat...
Running stock 3.1, rooted, cwm running - quite happy.
If you want to take it a step further, install Richardtrip's custom kernal and SetCPU and you will be amazed.
entropy.of.avarice said:
Running stock 3.1, rooted, cwm running - quite happy.
If you want to take it a step further, install Richardtrip's custom kernal and SetCPU and you will be amazed.
Click to expand...
Click to collapse
Hi entropy.of.avarice,
Thank you for the feedback, it is truly appreciated! I would not mind installing the new kernel as long as I knew for sure it would not break all that works well on my tablet right now.
Still on stock since I got mine - though I have since rooted - I'm not really making any use of it, only for file permissions and dropping boot animations onto the folder directly rather than through ADB.
I shopped around some of the ROM's floating around here and other that a few of the Touchwiz UI functions from Galaxy, [I don't even think it's supported or still available right now] there's nothing out there that would add to my experience in any appreciable way to risk going through all that [and back again] when I want to.
Stock is stable, runs smooth and fast and is supported if something ****s up and that is all I need - my life doesn't live and breath by the tablet so it's perfect for what I need it to be and what I need it to do.
I am using self-cooked official honeycomb 3.2 ROM (rooted, ad-hoc fix, etc)
with self-compiled 3.2 kernel, OC and apply different kind of fixes & patches.
Installing custom ROM & kernel is the act of tailor making your own OS.
It is why android is so attractive and additive.
Whay a non-stock ROM?
There are about as many answers to this as there are ROMs.
I have CWM / Recovery / Taboonay 2.0 w/ richardtrip's OC-able kernel (oc'd to 15000) and the tablet is Super Snappy! It has ad hoc support for tethering to my phone via WiFi, no random wake ups, Netflix with no broken cameras, Good GPS lock (after a bit of futzing...)
I was originally just gonna put 3.2 on there to experiment with and flash back after playing with it, but I got REALLY lucky. Did a FULL CWM backup and just flashed the ROM & Kernel over my existing ROM without wiping and...it just worked without me having to redo everything. So I just kept going..
I'd say at this point on the tablet no one REALLY needs 3.2, but a few of the modded kernels out there fix a number of sore spots that I wish ACER would just take care of...
I love our DEVS!
So...Up to you! But I currently LOVE taboonay 2.0 and the RT kernel...No issues at all for me...
(p.s. I still have two preceding backups of a couple of states of working 3.1 on my SD card that are 3 weeks apart that function wonderfully Just In Case! so, yeah..nothing really to lose by playing and testing...)
Why a non-stock ROM?
There are about as many answers to this as there are ROMs.
I have CWM / Recovery / Taboonay 2.0 w/ richardtrip's OC-able kernel (oc'd to 15000) and the tablet is Super Snappy! It has ad hoc support for tethering to my phone via WiFi, no random wake ups, Netflix with no broken cameras, Good GPS lock (after a bit of futzing...)
I was originally just gonna put 3.2 on there to experiment with and flash back after playing with it, but I got REALLY lucky. Did a FULL CWM backup and just flashed the ROM & Kernel over my existing ROM without wiping and...it just worked without me having to redo everything. So I just kept going..
I'd say at this point on the tablet no one REALLY needs 3.2, but a few of the modded kernels out there fix a number of sore spots that I wish ACER would just take care of...
I love our DEVS!
So...Up to you! But I currently LOVE taboonay 2.0 and the RT kernel...No issues at all for me...
(p.s. I still have two preceding backups of a couple of states of working 3.1 on my SD card that are 3 weeks apart that function wonderfully Just In Case! so, yeah..nothing really to lose by playing and testing...)
I rooted to gain performance. Taboonay and Richards kernel have given me a huge performance increase, no more lag.
Sent from my A500 using XDA Premium App
Don't change unless you don't have a life and you want to spend all your hours figuring out what is wrong, have tried them all and stock is less head ake.