HTC Dream (Rogers) - How to go back to stock? - G1 General

Hey guys,
I recently rooted and flashed my Dream to run CM6, but I'm very unhappy with the delays and lag I get trying to running Adroid 2.2 on this old phone.
I wanted to go back to the stock Android, 1.5 or 1.6, can't even remember.
Just wondering if anyone had a tutorial on how to do this?
Thanks in advance

May I recommend to try something before going back to the stock rogers firmware.
Try the release of the stock mt3g firmware: http://forum.xda-developers.com/showpost.php?p=8676013&postcount=1
(Remember the ebi1 portfile)
There are also various roms based on asop (Google's stock) 1.6 with root that you may find better than rogers stock.
Also firmwares like biffmod try to make cm6 more efficient with a good amount of success.
Otherwise if nothing works out you just reflash the e911 update http://forum.xda-developers.com/wik...Branded_EBI1_Dreams#Returning_to_Stock_Rogers

Also consider trying Super D. Its a Donut ROM that has many nice features and it is very fast.
http://forum.xda-developers.com/showthread.php?t=613809
An update may be comming once it reaches 1 million views!
EBI1 Port:
http://forum.xda-developers.com/showpost.php?p=8663984&postcount=996
EBI1 Ram Hack Port:
http://forum.xda-developers.com/showthread.php?t=645411
(incase you don't know, this will give your phone more RAM by taking some memory away from the graphics. So don't use this if you use graphically intensive apps such as games.)
Also try playing around with swap (compcache too but turning that off has always been best for me) to try to get the best settings for you. Super D is pretty fast so the best setting might just be completely off. YMMV.

ezterry said:
May I recommend to try something before going back to the stock rogers firmware.
Try the release of the stock mt3g firmware: http://forum.xda-developers.com/showpost.php?p=8676013&postcount=1
(Remember the ebi1 portfile)
There are also various roms based on asop (Google's stock) 1.6 with root that you may find better than rogers stock.
Also firmwares like biffmod try to make cm6 more efficient with a good amount of success.
Otherwise if nothing works out you just reflash the e911 update http://forum.xda-developers.com/wik...Branded_EBI1_Dreams#Returning_to_Stock_Rogers
Click to expand...
Click to collapse
I'm having troubles restoring the stock rogers ROM. I'm not sure how to flash the nbh file through fastboot. I tried downloading fastboot.exe to my pc but now an error pops up saying that AdbWinApi.dll is missing.. Please help?
Thanks!

check out the stickies

I figured it out... returned to stock yesterday.. re rooted but this time made a backup of my stock rom... foolish me..........forgot to do it last time

Related

Black screen and lag on i9000 2.2

Hi guys,
I am new to android world n amature in doing techy things on my mobile. I have updated my os from 2.1 to 2.2 via kies.
I get lag n black screens on my usage. Can anyone help me?
Sent from my GT-I9000 using XDA App
i laso get some lag end som blackscreens
but i have already done the lagfix.
but i have the brazilian version, also with 2.2 with
baseband i900bvjjpd
kernel 2.6.32.9 [email protected]_lation #3
dunoo if its maybe an app, but i have watchdog and there are no apps misbehaving :/
first of all i think your both in the wrong thread lol, wont get noticed much in this section.......... but anyway
Are you using 2.2 or 2.2.1 ?? there are alot of fixes in the 2.2.1 and is a lot quicker for a stock ROM.
if you wanted even more speed you could go for a custom ROM there is loads to chose from.... but it can get a bit technical so if your unsure DONT DO IT !!!
There are a few things to consider:
- as stated above, you should make sure you get the latest, because 2.2.1 should be available (even officially) pretty much everywhere
- after flashing a factory reset is recommended to get the best performance (do a backup before so you can restore anything)
- there are better kernels out there that can speed up things and make your experience smoother (speedmod, voodoo, tegrak, etc)
- there are custom roms out there that are junk free and should provide a richer better experience.
Hi,
I know my question may be weired to some of experience people out here.
but i am really confused
What is difference between linux kernal update and flashing rom.
how to update kernel on my samsung galaxy s (I9000 2.2 default by samsung)
Thanks
Kernels and ROMs go hand it hand, it pointless getting a custom ROM and keeping stock Kernel. or vice versa
if you look it the development section and look for kernels (speedmod, Voodoo ect) there is a detailed step by step guide to installing them, and what benefits they have... it will make more sense for you to read through it all, than it would for us to try break it down into simple terms

[Q] HTC Desire Z Stock Apps and ROM Questions

Hi im new to android but have rooted my phone and installed the Stock HTC rom IE no Carrier bloat ware only thing is there are so many apps on my phone that i dont use and never will IE twitter facebook,peep,stocks,quickoffice,talk(dosent work in canada) amazon mp3 etc now what i was wondering was is there either a way to delete these apps (i have already tryed with titanium backup and chuck norris mode they just come back on reboot) or is there a Vanilla 2.2 Rom out there with the Sense user interface or even vanilla android 2.2 period i would prefer a way just to get rid of the apps then going through the root s-off and have to overclock it again many thanks in advance sorry for the noobishness also keep in mind this is the desire z not g2
Carrier:Bell
Phone:HTC Desire Z
Titanium back up has always worked for me.you can always find other apps to do that for you, however, you may want to try different roms ,if you want sense interface ,you could always try virtouos rom
but it will come with all the apps that you said you dont want like twitter and facebook, etc....
i would recommend CM 6.1.1,(vanilla android) it is android 2.2 and widely knows as the most stable rom in this forum ,and it comes with oc kernel built in , and just to let you know, you don't need to root and s-off every time you change your rom
also you could try CM7 nighties ,that is android 2.3 and it could be run as a every day rom even though the stable version is not out yet.
you could try different roms set them the way you like it and take a back up so you can always go back.
Titanium has worked for most, but not all apps I've removed in the past (some of the Bell bloatware on that version of the Desire Z). Absolute System Root Tool is a paid app that has worked for me when Titanium did not, and there are other methods also, I'm sure.
Be careful, as some applications you mentioned are pretty integral to Sense (particularly Facebook and Stocks), and might break some things if you remove them. I would definitely backup the ROM before trying to delete them, if you are not already.
Maybe a stupid question but have you got S-off?
For some reason when you restart it checks wich software is installed and that's is something the S-off does....
Yes, I have S-Off.
Now, If I can ask a stupid question, what procedure did you use to debrand your Z, and which official ROM did you use? I haven't kept up recently, but when I first got my Z in December, debranding to the stock HTC ROM required making a gold card and doing some hex editing since the stock Euro ROM was older than the Bell one. It was a bit intimidating to me, and I haven't so far had a huge reason to change ROMs (the shipped ROM has been great so far, after removing the bloat). And the whole issue became a bit confusing and muddled to me, since I believe there have been more recent official ROMs released since December (which would not require the hex editing?). On the other hand, I have no real reason for staying on the Bell ROM other than laziness.
I debranded my Bell D-Z to Generic Euro 1.34 (requires full S-OFF, check the tutorial for dummies), then flashed an overclocked 1.4GHz kernel (Godspeed update)
That's all I need: a plain 2.2 with Sense (until I put my hands on 2.3 )
found a perfect guide managed to get rid of alot of stock apps i dont use ie stocks weather etc and i learned how to use cmd line also titanium backup never worked
http://forum.xda-developers.com/showthread.php?t=809231

[Discussion] Stock or Custom ROMs

Well with all the hype going on about custom (and sometimes stock) firmwares. I thought I would start a discussion and Perhaps a poll to see if you are using stock or custom ROMs.
As for my 2 cents: Samsung makes great hardware (at least to my experience) but sinks it down to sleep with the fishies with poor software support including bad very bad software suites (like Kies or Media studio the latter which installed a nasty rootkit on my laptop believe it or not for DRM), prematurely axing support to its newly launched devices (I remember hacking my samsung MP3 with korean firmware as I was really angry at samsung for axing the device 2 months after its release whats up with that ).
So what about you: Do u use custom ROMs or stick to late to almost never released stock ROMs?
Stock rom.
It does what I want. Internet-games-programs. It is fast and good.
I do not see a reason to go with a custom rom.
I use modaco. because its sooooo fast.
Overcome. Hands down the best rom/kernel IMHO.
Sent from my GT-P1000 using XDA Premium App
okay ... dumb question ... i've just ordered a Tab from T-Mobile, should have it Monday or Tuesday, so ... just what is a custom ROM/Kernal going to do for me?
Thanks,
pat----
Im sticking with stock atm...
As posted above, it does what i want.
Im on Overcome 1.3, undervolted, not overclocked
what it does for you is it removes bloatware, includes fixes to known bugs that samsung has not addressed with a proper firmware update, allows for overclocking and undervolting if you're into that, formats the file system to EXT4 making IO faster, installs a full backup and restore facility from recovery, and provides better battery life*
quadrant score from original firmware: 1000-1200
quadrant score from Overcome 1.3 no overclock: 1690
so yeah, custom IS better than stock until samsung gets all these tweaks into their official ROMs.
(*I don't know how it does that, but it does )
It should be said that in reality the split isn't just between stock and custom, but stock, "unreleased', and custom.
Most of the custom ROMs you can find here are based on Samsung's own unreleased test/dev builds (e.g. MoDaCo is based on JMI, Overcome is based on JMK). Even in their "raw" form, these unreleased ROMs are far better than those that actually ship on the device (BEWARE LOCKED BOOTLOADERS IF YOU ARE THINKING OF FLASHING ONE!!!).
If you take say Rotohammers build, it is stock JMI (JMK now?), without the locked bootloaders and pre-rooted. MoDaCo and Overcome go quite a bit further as they have completely rebuilt kernels and are tweaked for speed. Then you have Technomancers Gingerbread ROM, which is completely custom and based on CM7 rather than an existing Samsung build.
In my opinion, staying on a shipping Tab ROM means you are not getting as much out of your device as you could. Even the Samsung unreleased dev builds are way better than the shipping ROMs, so I don't know why Samsung haven't actually formally released them.
Regards,
Dave
I user overcome 1.4.4
Its much faster than the stock rom and seems to use less battery power in my particular use case.
Custom, as indicated in my signature. I have a T-Mobile Tab and in stock form, it was extremely slow. It sucked.
chicken roms is better ever
For those who say stock is fine i say you have no idea what you are missing. Try both, then make a decision. Custom all the way baby!
T-Mobile tab running latest Overcome
As a bell mobility tab user, i used the stock one (jj3) i think for about a month.
After that i decided to go with roto jme then jmg and after that went to modaco.
Was on modaco for about the last 3 months and i have decided to flash overcome.
There is a significant speed difference between modaco and overcome. I noticed lag in angry birds seasons with modaco but with overcome, barely any.
I am happy with flashing a custom Rom and would never go back to stock.
If only i could get a copy of the stock Rom just in case of any issues.
Hope that helps.
Sent from my GT-P1000 using XDA Premium App
The hardware is superb but it's let down badly by Samsung in not keeping it up to date with firmwares.
Using Custom roms solves this and provides an all round quality tablet so, yeah, custom roms for me.
I use a stock rom for now, but once my download for Overcome is done, I'll switch to it.
pendevous said:
I use a stock rom for now, but once my download for Overcome is done, I'll switch to it.
Click to expand...
Click to collapse
Read the guides before flashing.
I had stock. It was excellent, good multi-language support, excellent hardware support.
Tried MoDaCo. Lost most of language support. Hardware support only for the basic stuff.
Replaced with Overcome. Language support even sketchier. Battery performance awful. Hardware support still only basic stuff.
Tried going back to stock. I could not find the stock firmware that was originally available on the device. All «stock» firmwares in the wild had the same issues as the MoDaCo and Overcome. I was shocked and seriously puzzled!
Went to the repair shop and asked them to flash the device with the original.
- Two days later I was told, that they need some special cable to flash the device, and it's going to take a week to get it from Korea(!).
- One week later I was told, that the device needed motherboard replacement.
- One more week later I got the device.
Now my device has Excellent language support, but still fails to report Neighbouring GSM Cells.
Eventually I installed a Winblows in a VM (Bleh!) to try Kies.
To my greatest surprise after eventually connecting Kies says that my device is 'Not Upgradeable'.
So my adventure with custom firmwares is MOST unfortunate.
My ¢2: new users should NOT replace firmware unless they BADLY need something that SUPPOSEDLY a custom firmware would give.
Lachezarian said:
I had stock. It was excellent, good multi-language support, excellent hardware support.
Tried MoDaCo. Lost most of language support. Hardware support only for the basic stuff.
Replaced with Overcome. Language support even sketchier. Battery performance awful. Hardware support still only basic stuff.
Click to expand...
Click to collapse
Can you please elaborate more what do you mean by "hardware support", what would be the difference between "basic stuff" and "excellent"?
AFAIK, the custom ROMS are based on stock ROM, thus I can't understand there will be any difference over hardware support level.
With custom ROMs you are more free!
DarkPal said:
Read the guides before flashing.
Click to expand...
Click to collapse
I did. I ended up installing Rotohammer's instead, though. It works fine.

Finding out what ROM was installed

Hey
I used to have a nice ROM installed with a kernel that allowed overclocking. I would run my shift at 1.5Ghz and was really happy. Then when Gingerbread was coming out, I decided to flash a Gingerbread ROM because I was just excited for 2.3
Now there were not kernels for Gingerbread ROMs at that time. So formatted/wiped everything from my device using Clockwork Recovery. Now here's where I have a few questions:
After I wiped the entire device, when my phone booted, it seemed to have 2.3 installed so I assumed that since there was an OTA update for Gingerbread, it must have gotten updated somehow. I want to find out whether I have a custom ROM with 2.3 installed or is it a regular Gingerbread stock ROM that's on my device?
I would like to find out what kind of ROM is installed on my device right now and do whatever it takes to be able to flash a kernel that allows overclocking, because going back to 800Mhz from 1500Mhz is just not doing it.
I would also really appreciate if someone gave me direct links to a custom ROM (since I understand at this time it is impossible to flash an overclocked kernel, since HTC has not released official Gingerbread source code yet) with a flashable kernel that's completely stable and allows overclocking to 1.5Ghz.
I really don't care about the whole Cynaogen Mod etc, because I use LauncherPro anyway and from what I understood when I was reading about Cyanogen Mod, it doesn't change THAT much other than adding a little bit more functionality and mainly focusing on changing the phone interface, which is completely irrelevant to me.
Thank you in advance.
sajmonides said:
Hey
I used to have a nice ROM installed with a kernel that allowed overclocking. I would run my shift at 1.5Ghz and was really happy. Then when Gingerbread was coming out, I decided to flash a Gingerbread ROM because I was just excited for 2.3
Now there were not kernels for Gingerbread ROMs at that time. So formatted/wiped everything from my device using Clockwork Recovery. Now here's where I have a few questions:
After I wiped the entire device, when my phone booted, it seemed to have 2.3 installed so I assumed that since there was an OTA update for Gingerbread, it must have gotten updated somehow. I want to find out whether I have a custom ROM with 2.3 installed or is it a regular Gingerbread stock ROM that's on my device?
I would like to find out what kind of ROM is installed on my device right now and do whatever it takes to be able to flash a kernel that allows overclocking, because going back to 800Mhz from 1500Mhz is just not doing it.
I would also really appreciate if someone gave me direct links to a custom ROM (since I understand at this time it is impossible to flash an overclocked kernel, since HTC has not released official Gingerbread source code yet) with a flashable kernel that's completely stable and allows overclocking to 1.5Ghz.
I really don't care about the whole Cynaogen Mod etc, because I use LauncherPro anyway and from what I understood when I was reading about Cyanogen Mod, it doesn't change THAT much other than adding a little bit more functionality and mainly focusing on changing the phone interface, which is completely irrelevant to me.
Thank you in advance.
Click to expand...
Click to collapse
If you just did a wipe and didn't flash anything, your still running the same ROM as you were before the wipe. If you go into setting > about phone > software information > more, this will tell you your current ROM (build version). If you would like to continue using Sense but want to overclock I would suggest MikShift 1.1, otherwise I would suggest the Shift Deck ROM. Both can be overclocked with several different kernels, just do a little reading through the dev section to see what best suites you.
Disregard, just typed what crump said but he beat me to it!

[Q] Why should I put a Custom Rom on the A500?

Hi All,
I am a new A500 owner and a long time Viewsonic G Tablet owner; I know why I put a Custom Rom on the G Tablet (Stock Rom Sucked and VS dropped support). However after playing with my new A500 for the last week I really can see no reason so far to put a custom rom on this tablet.
The stock rom rooted and a few extras added/fixed like...
GPS Fix
NTFS Mount
Rooted
CWM Added
have really made this a very stable and very effective rom. I have been reading through the forum and I see a significant number of custom roms out there. I am sure they are there for a reason however for the life of me I can not determine why I would want to install any of them. I do also understand that I am coming late to the game on this tablet as I am sure these were probably developed to fix deficiencies in the stock rom when the tablet was first released.
So can someone explain to me why I would want to switch to a custom rom today given the stability and fixes available for the stock rom?
This is not meant to be a dig on any individual, group or any dev of these roms; I know these folks do an outstanding job and I appreciate every single one of them. However for someone new to this tablet it would be great to know what makes the custom roms better than what I already have with the stock/fixed rom I am running. I am currently running;
Android Version: 3.1
Kernel Version: 2.6.36.3
Build Number: Acer_A500_4.010.11_COM_GEN2
This is a sincere question and I would appreciate not getting flamed or bashed for asking. This is in the Q&A section so I am hoping this is the right place to get the answers I am seeking.
" The only way to learn is to ask... so I am asking "
To me I think everyone installs custom roms for all diffrent reasons. Each rom has its own benefits and restrictions. I have tried a few and always go back to stock.
Good luck and flash with great Caution
erica_renee said:
To me I think everyone installs custom roms for all diffrent reasons. Each rom has its own benefits and restrictions. I have tried a few and always go back to stock.
Good luck and flash with great Caution
Click to expand...
Click to collapse
Hi Erica Renee,
Thank you for the quick reply... I was just not sure if there was a relevant issue that would persuade me to move from my stock rom to a custom one. I very much appreciate your response!!!
Rick
I'm coming from a Viewsonic Gtablet, and with the gtablet a custom rom was a must, here with the iconia I don't see any advantage to use a custom rom, Android 3.1 has everything I wanted. I only rooted it for ad-hoc support, but barely I use the ad-hoc, is only for emergencies, besides that, even rooting is not really necessary. Android OS backups all application settings, so each time I uninstall and reinstall an application, my former settings are there.
Just enjoy your Iconia
Frankly, I haven't felt the need to flash a custom ROM to the A500. I did root it to be able to use certain apps.
I have tried a variety of ROMs and kernels on my HTC EVO 4G, but that's because stock Froyo and even stock Gingerbread is boring. I think stock Honeycomb looks and performs great. It makes me really look forward to Icecream Sandwich.
I did add ADWLauncher to my A500, so maybe that's another reason why I haven't felt the need to flash a custom ROM.
i find myself in the same boat...
Running stock 3.1, rooted, cwm running - quite happy.
If you want to take it a step further, install Richardtrip's custom kernal and SetCPU and you will be amazed.
entropy.of.avarice said:
Running stock 3.1, rooted, cwm running - quite happy.
If you want to take it a step further, install Richardtrip's custom kernal and SetCPU and you will be amazed.
Click to expand...
Click to collapse
Hi entropy.of.avarice,
Thank you for the feedback, it is truly appreciated! I would not mind installing the new kernel as long as I knew for sure it would not break all that works well on my tablet right now.
Still on stock since I got mine - though I have since rooted - I'm not really making any use of it, only for file permissions and dropping boot animations onto the folder directly rather than through ADB.
I shopped around some of the ROM's floating around here and other that a few of the Touchwiz UI functions from Galaxy, [I don't even think it's supported or still available right now] there's nothing out there that would add to my experience in any appreciable way to risk going through all that [and back again] when I want to.
Stock is stable, runs smooth and fast and is supported if something ****s up and that is all I need - my life doesn't live and breath by the tablet so it's perfect for what I need it to be and what I need it to do.
I am using self-cooked official honeycomb 3.2 ROM (rooted, ad-hoc fix, etc)
with self-compiled 3.2 kernel, OC and apply different kind of fixes & patches.
Installing custom ROM & kernel is the act of tailor making your own OS.
It is why android is so attractive and additive.
Whay a non-stock ROM?
There are about as many answers to this as there are ROMs.
I have CWM / Recovery / Taboonay 2.0 w/ richardtrip's OC-able kernel (oc'd to 15000) and the tablet is Super Snappy! It has ad hoc support for tethering to my phone via WiFi, no random wake ups, Netflix with no broken cameras, Good GPS lock (after a bit of futzing...)
I was originally just gonna put 3.2 on there to experiment with and flash back after playing with it, but I got REALLY lucky. Did a FULL CWM backup and just flashed the ROM & Kernel over my existing ROM without wiping and...it just worked without me having to redo everything. So I just kept going..
I'd say at this point on the tablet no one REALLY needs 3.2, but a few of the modded kernels out there fix a number of sore spots that I wish ACER would just take care of...
I love our DEVS!
So...Up to you! But I currently LOVE taboonay 2.0 and the RT kernel...No issues at all for me...
(p.s. I still have two preceding backups of a couple of states of working 3.1 on my SD card that are 3 weeks apart that function wonderfully Just In Case! so, yeah..nothing really to lose by playing and testing...)
Why a non-stock ROM?
There are about as many answers to this as there are ROMs.
I have CWM / Recovery / Taboonay 2.0 w/ richardtrip's OC-able kernel (oc'd to 15000) and the tablet is Super Snappy! It has ad hoc support for tethering to my phone via WiFi, no random wake ups, Netflix with no broken cameras, Good GPS lock (after a bit of futzing...)
I was originally just gonna put 3.2 on there to experiment with and flash back after playing with it, but I got REALLY lucky. Did a FULL CWM backup and just flashed the ROM & Kernel over my existing ROM without wiping and...it just worked without me having to redo everything. So I just kept going..
I'd say at this point on the tablet no one REALLY needs 3.2, but a few of the modded kernels out there fix a number of sore spots that I wish ACER would just take care of...
I love our DEVS!
So...Up to you! But I currently LOVE taboonay 2.0 and the RT kernel...No issues at all for me...
(p.s. I still have two preceding backups of a couple of states of working 3.1 on my SD card that are 3 weeks apart that function wonderfully Just In Case! so, yeah..nothing really to lose by playing and testing...)
I rooted to gain performance. Taboonay and Richards kernel have given me a huge performance increase, no more lag.
Sent from my A500 using XDA Premium App
Don't change unless you don't have a life and you want to spend all your hours figuring out what is wrong, have tried them all and stock is less head ake.

Categories

Resources