[Q] Getting back to branded G2 stock firmware - Galaxy S II General

Quick question before rooting and upgrading my firmware on Galaxy S2
If by some chance I need to get my phone back to un-rooted status and stock firmware do I just download the correct branded firmware and kernel.
And then flash via odin.
Will I have to do anything else to remove all evidence of custom rom and kernel fun?
I ask this just so I'm sure that if I have a way back in case I have to send my phone back.

drexciya said:
Quick question before rooting and upgrading my firmware on Galaxy S2
If by some chance I need to get my phone back to un-rooted status and stock firmware do I just download the correct branded firmware and kernel.
Where you going to download from ???
And then flash via odin.
Yes if you have original firmware .
Will I have to do anything else to remove all evidence of custom rom and kernel fun?
Check root is removed check any apps that work on root are removed .
Reset custom binary counter to zero .
http://forum.xda-developers.com/showthread.php?t=1068522
best is to have a copy of original if its branded or even later updated original or at worst stock rom .
http://forum.xda-developers.com/showthread.php?t=1113928
Branded phone seller may refuse warranty if not their rom but a stock rom . However that would be covered by Samsung .
jje
jje
Click to expand...
Click to collapse

Thanks for your reply, that answers all my questions.

How do you check if root is removed and how do you remove it?

TheBishopOfSoho said:
How do you check if root is removed and how do you remove it?
Click to expand...
Click to collapse
I have the same question ...
I have done the following:
SGS2 with Operator ROM -> flash with stock kernel (no bloatware) -> Litening ROM 1.4
... and was wondering how to get my SGS2 back to 2nd state, which is stock kernel/firmware/unrooted, without the Operator bloatwares (step 2 afrom above)
So unrooting or learning how to know if it is unrooted interest me as well

drexciya said:
Thanks for your reply, that answers all my questions.
Click to expand...
Click to collapse
If it answered all your questions then at least give the dude a thanks...
OD
(Artist formally known as JupiterDroid)

Related

[Q] i9500 Want to upgrade to 4.3 after rooting

I have rooted my S4 using CF-Auto-Root.
I'm not sure if the 4.3 upgrade is available at the moment or not, but if not it should be available soon.
Is there a way to revert the rooting so that the stock android would allow me to do the upgrade ?
Would that leave me unable to root it again, or CF-Auto-Root doesn't care whether i'm running 4.2.2 or 4.3
Thanks in advance
reubenbubu said:
I have rooted my S4 using CF-Auto-Root.
I'm not sure if the 4.3 upgrade is available at the moment or not, but if not it should be available soon.
Is there a way to revert the rooting so that the stock android would allow me to do the upgrade ?
Would that leave me unable to root it again, or CF-Auto-Root doesn't care whether i'm running 4.2.2 or 4.3
Thanks in advance
Click to expand...
Click to collapse
Hi,
You should have asked before you did something that you were unsure of.
At the moment there is no way of getting completely back to stock if you customize your i9500.
The Triangle Away method of resetting your counter, does not currently work for the i9500.
So , you probably cannot return to complete stock in order to get the OTA , if and when it comes.
Your choice of ROMS is HERE
Does not look like much in the way of 4.3
reubenbubu said:
I have rooted my S4 using CF-Auto-Root.
I'm not sure if the 4.3 upgrade is available at the moment or not, but if not it should be available soon.
Is there a way to revert the rooting so that the stock android would allow me to do the upgrade ?
Would that leave me unable to root it again, or CF-Auto-Root doesn't care whether i'm running 4.2.2 or 4.3
Thanks in advance
Click to expand...
Click to collapse
malybru said:
Hi,
You should have asked before you did something that you were unsure of.
At the moment there is no way of getting completely back to stock if you customize your i9500.
The Triangle Away method of resetting your counter, does not currently work for the i9500.
So , you probably cannot return to complete stock in order to get the OTA , if and when it comes.
Your choice of ROMS is HERE
Does not look like much in the way of 4.3
Click to expand...
Click to collapse
Well i beg to differ with you Sir.
In I9500 the binary counter is hidden and that has nothing to do with OTA updates
To OP you can revert to Stock by downloading the latest STock rom and flash it via odin..
After you have flashed it VIa odin then you are pure stock and OTA updates would work like Charm
What you have done with CF-Root has only triggered the Binary counter and makes your phone out of warranty ( until the triangle away is available for i9500)
manu44 said:
Well i beg to differ with you Sir.
In I9500 the binary counter is hidden and that has nothing to do with OTA updates
To OP you can revert to Stock by downloading the latest STock rom and flash it via odin..
After you have flashed it VIa odin then you are pure stock and OTA updates would work like Charm
What you have done with CF-Root has only triggered the Binary counter and makes your phone out of warranty ( until the triangle away is available for i9500)
Click to expand...
Click to collapse
Hi,
I am only reporting what other people have reported.
It may be that you are correct as well. :good:
I do not wish bad on anyone,but some have reported no OTA possible after they rooted.
I hope that I am wrong.
manu44 said:
Well i beg to differ with you Sir.
In I9500 the binary counter is hidden and that has nothing to do with OTA updates
To OP you can revert to Stock by downloading the latest STock rom and flash it via odin..
After you have flashed it VIa odin then you are pure stock and OTA updates would work like Charm
What you have done with CF-Root has only triggered the Binary counter and makes your phone out of warranty ( until the triangle away is available for i9500)
Click to expand...
Click to collapse
Not completely true, Samsung has instructed service points to repair faulty devices under warranty even if they are rooted. This is however a ONE time courtesy, from the second time the owner has to pay to repair if the phone is rooted.
malybru said:
Hi,
I am only reporting what other people have reported.
It may be that you are correct as well. :good:
I do not wish bad on anyone,but some have reported no OTA possible after they rooted.
I hope that I am wrong.
Click to expand...
Click to collapse
Thats okay buddy..
gee2012 said:
Not completely true, Samsung has instructed service points to repair faulty devices under warranty even if they are rooted. This is however a ONE time courtesy, from the second time the owner has to pay to repair if the phone is rooted.
Click to expand...
Click to collapse
Ya, but i guess it depends on region to region..

[Q] What next? I9505 LTE

Hello all!
I have the following current set-up:
GT-I9505
Droid: 4.2.2
Baseband: I9505XXUAMDM
Kernel: 3.4.0-526204, [email protected] 1
Recovery: pHILZ
So I have just powered into Philz and selected to a backup and here my questions begin:
Where is the backup located ?
Should I also leave it on the phone (takes up just under 2gb) ?
What custom rom is the best (state your reasons) ?
My device just told me there is an update avalible, however I can't get it due to being on a modified phone Any ideas?
What can be safely removed from the apps (Samsung stuff, google play books etc?)
Thanks guys
The backup should be somewhere in external SDCard (I don't use Philz recovery)
Should I also leave it on the phone (takes up just under 2gb) ?
Click to expand...
Click to collapse
Definitively yes, so you have it ready if you mess up with something on your phone and you are far from a computer.
I make frequent backups, and I delete the previous one once the new one is finished.
What custom rom is the best (state your reasons) ?
Click to expand...
Click to collapse
Just try some of the available ones and see which one suits you best.
Such question is forbidden on XDA.
As for the official updates, you can't apply them to your device since you flashed things on it. You have to revert back to official firmware and erase the flash counter. Or wait for the official firmware to be used in a custom flashable ROM...
Answers to all of your questions are easily found by searching.
MistahBungle said:
Answers to all of your questions are easily found by searching.
Click to expand...
Click to collapse
I was asking people personal opinion, You should know that this forum is a mess and it's not that easy to find answers to some questions, also like I say this was asking peoples personal opinions, Don't surf the Q & A section if you have no intent on helping The amount of keyboard warriors that just post "Use the search" to boost there post count is untrue!
I tried searching but didn't get the answers I needed, I understand some people just post without searching, but I assure you thats not the case here
XS_31 said:
The backup should be somewhere in external SDCard (I don't use Philz recovery)
Definitively yes, so you have it ready if you mess up with something on your phone and you are far from a computer.
I make frequent backups, and I delete the previous one once the new one is finished.
Just try some of the available ones and see which one suits you best.
Such question is forbidden on XDA.
As for the official updates, you can't apply them to your device since you flashed things on it. You have to revert back to official firmware and erase the flash counter. Or wait for the official firmware to be used in a custom flashable ROM...
Click to expand...
Click to collapse
Ok no worries thanks for the reply, I am gonna give Cyanogen a shot and see how it feels
I did flash it with official fw, or so I thought I did, I used the FW in this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
Is that not official?
Once again, Thanks for the reply.
I did flash it with official fw, or so I thought I did, I used the FW in this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
Is that not official?
Click to expand...
Click to collapse
It is official, but you have to get your official status back and reset flashing counter (step 3 of the guide you followed : "If you want, after rooting with odin, to get official status and reset binary counter ON I9505 for warranty reason, do it before flashing stock firmware, refer to this link").
Thanks XS_31 I will take a look at that now.
Peace

[Q] Return My S4 505 to stock

Hi
I need to return my S4 to Samsung for a warranty repair. I can't find my original nand back up. I need a link to uk stock roms please to flash in odin I do believe. And stock recovery. If this is done will it be back to stock and no counter?? I've not updated bootloader so no Knox counter.
Also will this make it Kies update able again???
Cheers People
Robbo
Robbo106 said:
Hi
I need to return my S4 to Samsung for a warranty repair. I can't find my original nand back up. I need a link to uk stock roms please to flash in odin I do believe. And stock recovery. If this is done will it be back to stock and no counter?? I've not updated bootloader so no Knox counter.
Also will this make it Kies update able again???
Cheers People
Robbo
Click to expand...
Click to collapse
Hello mate, If you did not updated your phone on 4.3 samsung stock firmware then please feel free to download the 4.2.2 from here http://www.sammobile.com/firmwares/2/ and flash it via odin by selecting PDA . then send it back have a nice day.
Hi
Thanks for the reply but it just takes me to the home page of sammobile. And what do you mena by send it back?? Thanks??
Do these firmwares also flash stock recovery??
Cheers Robbo
Repulsa said:
Hello mate, If you did not updated your phone on 4.3 samsung stock firmware then please feel free to download the 4.2.2 from here http://www.sammobile.com/firmwares/2/ and flash it via odin by selecting PDA . then send it back have a nice day.
Click to expand...
Click to collapse
Robbo106 said:
Hi
Thanks for the reply but it just takes me to the home page of sammobile. And what do you mena by send it back?? Thanks??
Do these firmwares also flash stock recovery??
Cheers Robbo
Click to expand...
Click to collapse
Hello again , you need to sign up sir in order to check it out then click the Link that i gave you and download the stock rom that you need , once you flash this stock rom from samsung, you should good to go to send it for warranty/repair. more to say just like the first time you bought your phone. have a nice day.
Repulsa said:
Hello again , you need to sign up sir in order to check it out then click the Link that i gave you and download the stock rom that you need , once you flash this stock rom from samsung, you should good to go to send it for warranty/repair. more to say just like the first time you bought your phone. have a nice day.
Click to expand...
Click to collapse
Thanks again. All signed up and it takes me to the firmware and phone select page.
If I select my phone and UK it gives me a MK9 version. Is that ok? or will that be 4.3.
Can I ask another question too please. If I was to update to an official sammy 4.3 rom and then root. Would I still get the knox count or problems??
Robbo
Robbo106 said:
Thanks again. All signed up and it takes me to the firmware and phone select page.
If I select my phone and UK it gives me a MK9 version. Is that ok? or will that be 4.3.
Can I ask another question too please. If I was to update to an official sammy 4.3 rom and then root. Would I still get the knox count or problems??
Robbo
Click to expand...
Click to collapse
Let me makes things clear for you mate , right now i have an old bootloader (No Knox warranty void, when i go to download mode) means i can flash any 4.2.2 firmware without having any knox void warranty. this is what i do i flash a pre-rooted rom then use a triangle away to reset the binary and use Phil recovery and flash any 4.3 custom rom i want! but if you need to send your phone to samsung because there's a hardware problem , feel free to flash a 4.2 from you country.(Since more likely after they fix your phone they will prolly update it to 4.3) remember flashing a 4.3 mk9 stock rom means a new bootloader/Knox void warranty 0x0 willl be activate.So if you flash root/custom rom that should void your warranty to 0x1 Please feel free to check more about Knox from here http://forum.xda-developers.com/showthread.php?t=2447832
Robbo106 said:
Thanks again. All signed up and it takes me to the firmware and phone select page.
If I select my phone and UK it gives me a MK9 version. Is that ok? or will that be 4.3.
Can I ask another question too please. If I was to update to an official sammy 4.3 rom and then root. Would I still get the knox count or problems??
Robbo
Click to expand...
Click to collapse
1- Ur phone is unbranded? MK9 use android 4.3. I will tell ya the correct firmware for u if u are lil confused
2- If u root it u will void ur warranty. Ur knox will be 0x1
Repulsa said:
Let me makes things clear for you mate , right now i have an old bootloader (No Knox warranty void, when i go to download mode) means i can flash any 4.2.2 firmware without having any knox void warranty. this is what i do i flash a pre-rooted rom then use a triangle away to reset the binary and use Phil recovery and flash any 4.3 custom rom i want! but if you need to send your phone to samsung because there's a hardware problem , feel free to flash a 4.2 from you country.(Since more likely after they fix your phone they will prolly update it to 4.3) remember flashing a 4.3 mk9 stock rom means a new bootloader/Knox void warranty 0x0 willl be activate.So if you flash root/custom rom that should void your warranty to 0x1 Please feel free to check more about Knox from here http://forum.xda-developers.com/showthread.php?t=2447832
Click to expand...
Click to collapse
Yes I understood that. I'm in the same situation as you as in the way I flash ROMS. I didn't realise that the counter still worked even if it was an official update with bootloader, just thought if I flashed a custom rom with new bootloader it started the Knox warranty void.
Thanks for all your help. I'm gutted now though coz your right Samsung probably update my phone and then I'm b****ed anyway if I root again and custom rom it. Your link doen't take me to a 4.2.2. rom though so I'll keep looking.
Cheers Robbo
Robbo106 said:
Yes I understood that. I'm in the same situation as you as in the way I flash ROMS. I didn't realise that the counter still worked even if it was an official update with bootloader, just thought if I flashed a custom rom with new bootloader it started the Knox warranty void.
Thanks for all your help. I'm gutted now though coz your right Samsung probably update my phone and then I'm b****ed anyway if I root again and custom rom it. Your link doen't take me to a 4.2.2. rom though so I'll keep looking.
Cheers Robbo
Click to expand...
Click to collapse
Im sorry about that here you go www.sammobile.com/firmwares/1/ and incase your having trouble feel free to ask here and ill answer you whenever i can or you can ask @Joku1981 as well. have a nice day.
Joku1981 said:
1- Ur phone is unbranded? MK9 use android 4.3. I will tell ya the correct firmware for u if u are lil confused
2- If u root it u will void ur warranty. Ur know will be 0x1
Click to expand...
Click to collapse
Yes I'm unbranded and on 3 network. Unlocked
Would rather have sammy 4.2.2 to return it on please. Not confused just don't know how to find older version. It just brings up latest.
Robbo
Robbo106 said:
Yes I'm unbranded and on 3 network. Unlocked
Would rather have sammy 4.2.2 to return it on please. Not confused just don't know how to find older version. It just brings up latest.
Robbo
Click to expand...
Click to collapse
- UK Android 4.3 -> HERE
- UK Android 4.2.2 -> HERE
Hi you've all been a great help. But the day has come I have to send my s4 in for repairs. Just need some more help.
Please tell me if this is correct method to get back to stock?
Do u flash stock recovery using odin and what options? Pda? Modem?
Then do I use triangle away to reset all counters and then flash stock rom with odin?
Just wanna get it right
Cheers Robbo
Sent from my GT-I9505 using XDA Premium 4 mobile app
Time to restore
Hi you've all been a great help. But the day has come I have to send my s4 in for repairs. Just need some more help.
Please tell me if this is correct method to get back to stock?
Do u flash stock recovery using odin and what options? Pda? Modem?
Then do I use triangle away to reset all counters and then flash stock rom with odin?
Just wanna get it right
Cheers Robbo
Joku1981 said:
- UK Android 4.3 -> HERE
- UK Android 4.2.2 -> HERE
Click to expand...
Click to collapse
Robbo106 said:
Hi you've all been a great help. But the day has come I have to send my s4 in for repairs. Just need some more help.
Please tell me if this is correct method to get back to stock?
Do u flash stock recovery using odin and what options? Pda? Modem?
Then do I use triangle away to reset all counters and then flash stock rom with odin?
Just wanna get it right
Cheers Robbo
Click to expand...
Click to collapse
You need to flash a pre-rooted rom from djembey thread. Then you can use triangle away to reset the binary .and the flash a stock rom and sent it for repair. Please read the instruction on djembey thread so you wont void ur warranty.
2nd opinion . Flash a stock rom with odin by selecting PDA. And root your phone using saferoot (i dont know about this if it works) install triangle away . Reset binary . Reflash stock again then send.
Sent from Hell ?
Is the pre rooted stock rom so that triangle away will work??? I'm on a pre rooted custom rom but need a samsung kernal for triangle away to work properly. If a flash the stock rom I have on 4.2.2 will that aslo flash stock recovery???
Repulsa said:
You need to flash a pre-rooted rom from djembey thread. Then you can use triangle away to reset the binary .and the flash a stock rom and sent it for repair. Please read the instruction on djembey thread so you wont void ur warranty.
2nd opinion . Flash a stock rom with odin by selecting PDA. And root your phone using saferoot (i dont know about this if it works) install triangle away . Reset binary . Reflash stock again then send.
Sent from Hell ?
Click to expand...
Click to collapse
Robbo106 said:
Is the pre rooted stock rom so that triangle away will work??? I'm on a pre rooted custom rom but need a samsung kernal for triangle away to work properly. If a flash the stock rom I have on 4.2.2 will that aslo flash stock recovery???
Click to expand...
Click to collapse
Thats correct ,as long its a Stock and rooted then yes you can reset the binary.then flash the stock rom again and you should be fine . incase your phone are still in old bootloader (no knox, never flash 4.3 Samsung rom) then feel free to flash a 4.2.2 Pre-rooted BMGA-odex-FULL from djembey thread ,once your done, Download/Install triangle away and reset the binary, flash a Normal stock rom from samsung, Boot into download mode and you will see it says Official and your good to go Goodluck mate
You've been a great help thanks. Stock recovery is that also flashed when I flash the stock rom last through odin???
So I'm gonna flash a stock rom pre rooted 4.2.2 with CWM then use triangle away then flash stock samsung through odin.
Repulsa said:
Thats correct ,as long its a Stock and rooted then yes you can reset the binary.then flash the stock rom again and you should be fine . incase your phone are still in old bootloader (no knox, never flash 4.3 Samsung rom) then feel free to flash a 4.2.2 Pre-rooted BMGA-odex-FULL from djembey thread ,once your done, Download/Install triangle away and reset the binary, flash a Normal stock rom from samsung, Boot into download mode and you will see it says Official and your good to go Goodluck mate
Click to expand...
Click to collapse

[Q] rom Question

Hi
Im new to Android and got some questions. I ´v been reading but at this point i rather ask.
I got an I9505 Int unbranded model on 4.2.2 (UBMGA) knox free. I would like to try out some roms but be able to revert back to stock for official updates in the future.
I would like to tryout GE of the latest 4.4.2 without knox or locked bootloader is that possible?
Also if its possible to install an official 4.3 TW version without the bloatware?
Just need a push in the right direction.
Thanks
digitalsatan said:
Hi
Im new to Android and got some questions. I ´v been reading but at this point i rather ask.
I got an I9505 Int unbranded model on 4.2.2 (UBMGA) knox free. I would like to try out some roms but be able to revert back to stock for official updates in the future.
I would like to tryout GE of the latest 4.4.2 without knox or locked bootloader is that possible?
Also if its possible to install an official 4.3 TW version without the bloatware?
Just need a push in the right direction.
Thanks
Click to expand...
Click to collapse
You can start rooting your phone and then flash a Custom recovery such as Philz/TWRP/CWM and flash any 4.3 Rom's (Bloatware) you like and make sure its a knoxfree rom. and about 4.4 kitkat it wont work for us Oldbootloader (NOWIFI) since Samsung did not release any kernel source yet . so be patience . Until they relase the Official. Have a nice day.
And If you wanna go back just flash a 4.2.2 Prerooted BMGA stock > Reset binary > Flash a normal Stock 4.2.2
Repulsa said:
You can start rooting your phone and then flash a Custom recovery such as Philz/TWRP/CWM and flash any 4.3 Rom's (Bloatware) you like and make sure its a knoxfree rom. and about 4.4 kitkat it wont work for us Oldbootloader (NOWIFI) since Samsung did not release any kernel source yet . so be patience . Until they relase the Official. Have a nice day.
And If you wanna go back just flash a 4.2.2 Prerooted BMGA stock > Reset binary > Flash a normal Stock 4.2.2
Click to expand...
Click to collapse
Great reply thanks!
digitalsatan said:
Great reply thanks!
Click to expand...
Click to collapse
No worries mate , feel free to ask anything here if you got any problem , and im sure alot of xda member's will try to solve that problem "Btw if your flashing a custom rom via recovery make sure to wipe or follow their instruction in order to prevent any issue .
Repulsa said:
No worries mate , feel free to ask anything here if you got any problem , and im sure alot of xda member's will try to solve that problem "Btw if your flashing a custom rom via recovery make sure to wipe or follow their instruction in order to prevent any issue .
Click to expand...
Click to collapse
is there anyway of updating to the official 4.3 without getting the new bootloader or knox?
digitalsatan said:
is there anyway of updating to the official 4.3 without getting the new bootloader or knox?
Click to expand...
Click to collapse
No. Unless you flash a Knox-free custom ROM, but you can't do it with the official one

device status stuck on custom

so i corrupted the efs on my SM-N900W8 note 3 but i used a method flashing a efs script reset and the phone booted up perfectly. But for some reason no matter how much i factory reset or flash stock roms i cannot get the phone to go back to offical status.
Please help thanks alot guys.
Why do you need it to go back to official status may I ask? Do you need to send it back for repair?
As far as I know if you either root, flash custom recovery or kernel it will always stay at custom. In my case, the only time it goes back to official is when I use odin to flash back the rogers stock rom.
hey_joe said:
Why do you need it to go back to official status may I ask? Do you need to send it back for repair?
As far as I know if you either root, flash custom recovery or kernel it will always stay at custom. In my case, the only time it goes back to official is when I use odin to flash back the rogers stock
rom.
Click to expand...
Click to collapse
I have a buyer who doesn't mind the Knox trip but would like to have it set to official please help.
master4953 said:
I have a buyer who doesn't mind the Knox trip but would like to have it set to official please help.
Click to expand...
Click to collapse
I suggest you download your provider's official firmware then flash through odin.
hey_joe said:
I suggest you download your provider's official firmware then flash through odin.
Click to expand...
Click to collapse
Well I bought it from Rogers( which I regret) but it is now on the wind network so which one should I flash ?
master4953 said:
Well I bought it from Rogers( which I regret) but it is now on the wind network so which one should I flash ?
Click to expand...
Click to collapse
It's originally Rogers so I suggest you use Rogers. Unfortunately you will have to download it from sammobile ( unless you can find an alternative ) since the link I use isn't working anymore. Download the MJ4 since it's the latest one from them.
edit: found a live link here.
hey_joe said:
It's originally Rogers so I suggest you use Rogers. Unfortunately you will have to download it from sammobile ( unless you can find an alternative ) since the link I use isn't working anymore. Download the MJ4 since it's the latest one from them.
Click to expand...
Click to collapse
I hope this works cause I have been flashing wind stock roms all day
master4953 said:
I hope this works cause I have been flashing wind stock roms all day
Click to expand...
Click to collapse
It will work. The reason you're getting custom despite flashing stock rom from wind is because the phone is originally rogers and if anything other than that is flashed, it will show as custom.
hey_joe said:
It will work. The reason you're getting custom despite flashing stock rom from wind is because the phone is originally rogers and if anything other than that is flashed, it will show as custom.
Click to expand...
Click to collapse
okay but i used to flash wind stock roms all the time and never had this issue but any hoo im downloading the firmware now i will flash it and i will definitely get back to you thank for your help

Categories

Resources