Database Users

[Tutorial]Beginner Android setup

Hey, since there is many requests for how to setup the android on you'r HD2, i was thinking "why dont i make one?" So here it is.
PS!!! My english is not the greatest.
First download this radio if you dont have it (recomended): 2.10.50.08_2
And install it, boot up you'r HD2. A stable ROM is also recomended.
Second download one of the builds from: Here
Third: Clear you'r SD card (Only if you have a low mb sd card) You dont really have to, but if you do, u might get some smoother speed.
Four: Extract the build you downloaded to you'r desktop on you computer and Copy the files inside the folder you extracted to. ALL files. and past them into you SD card. (VIA USB) once done, unplug you'r usb cable. (If u choosed the froyo build, just put the whole android folder to the root of you'r card)
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
Six: Enjoy!
Note: If you'r screen turns black, turn off auto backlight. If it's still black, change radio. AND!!! This dont kills you'r winmo.
I'm non genius but i made this to help you guys.
Please correct me if i am wrong.
Cheers!

Hi,
Thanks for the info but I have done all that without the radio update. I'm running a stock vodafone ROM. I manage to get the haret launched and all the code scrolling but then the screen just fades to black and doen't finish the boot up... Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Cheers!

FreddernLFC said:
Third: Clear you'r SD card (i did, dont know if it's recomended)
Click to expand...
Click to collapse
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
chazzerchops said:
Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Click to expand...
Click to collapse
Yes, most likely. What you're reporting sounds like what other people had before they installed a compatible radio.

Just want to add:
1. depends on the build, you have to extract the content to SD based on the instruction. (for example, the Froyo build you have to extract all files to a folder named "android" at the root of SD)
2. Must disable the auto backlight in the WM first, else you will some times get the "black screen". If you look carefully or under strong light, you'll still see things on screen, there is just no back light.
2. Run clrcad before Haret to get the sound working.

Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?

chazzerchops said:
Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?
Click to expand...
Click to collapse
Updating only the radio shouldn't reset your HD2 to factory default, unless perhaps if you flash it using a stock ROM Update Utility.
Use the radio that FreddernLFC links to from the first post; it includes a CustomRUU, which should flash the radio to your HD2 without restoring it to factory defaults.

Hmmm.. will have another look at it. Ran through the updater and 5mins into it it errored so had to go through the recover process. I'll try again later. Cheers

meptik said:
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
Click to expand...
Click to collapse
Mine didn't work with stuff on my 8Gb card so I copied the whole card to my PC, reformatted the card, copied over the Android stuff and it then worked. I the copied all the back up stuff back and Android stopped working (tty error).

green screen
what do i do if i get a green screen...i ran haret..now i see a green screen

psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
Take out the battery and start up again, I've got many green screens, but after some tryes it went perfect

psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
You try again. Common issue.

Hi Everyone, just wanted to add a few things. i would recommend you turn off sense from the device, then power off the device, once it powers on again go straight to your file explorer and run the process. you should notice the cursor at the bottom blink at a slower pace, if its in hyper mode the system will crash. it has been helping me, hopes this helps to all

what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio

FreddernLFC said:
...
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
...
Click to expand...
Click to collapse
how fast android drains battery ?

sev15 said:
what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio
Click to expand...
Click to collapse
i assume u can carry on 2.12.50.xx ? dont need to downgrade .. as long as its a .50 radio it shld be fine and pretty new shld be alright .. am i right guys ?

i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !

pool7979 said:
i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !
Click to expand...
Click to collapse
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck

How long does it spend? Because I am waiting for a long time.

thihaz said:
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck
Click to expand...
Click to collapse
thanks man !!! cool .. i have just installed android .. but i choose the sense interface. i noticed our hard buttons are not suppose to work right ? and do we have to run clrd and haret everytime we wanna start android ?
on regards to installations of android software, they will be on storage card ?
for the bro above, my running of andoid was fast .. i think less than 5 mins .. after haret, i see many words scrolling .. very fast .. then the next moment , it loads into android and will ask u what interface u want .

vdesire v5 out

[Q] Please... Can somebody help me to 'get rid of' Android on my phone...?

As the headline says: I want to remove, or go back to WM, but without deleting everything and go back to scratch... I have some appointments that I want to save, and that I don't have anywhere else... (I can't find them now that Android is running...)
Please, please help me...
(Could the software make my appointments disappear?
Can somebody see if these software information is 'correct':
OS Version
5.2.23138
Manila version
2.5.20183025.0
ROM version
18.Sep.2010 WWE
Radio version
2.07.51.22_2
Protocol version
15.32.50.07U

Just reboot your phone.

reboot? as in turning it off and on? It doesn't work... And neither does taking the battery out.... Sorry, my english is very bad, so I don't know what reboot is, or how I do it... Thnx...

kjessa_83 said:
reboot? as in turning it off and on? It doesn't work... And neither does taking the battery out.... Sorry, my english is very bad, so I don't know what reboot is, or how I do it... Thnx...
Click to expand...
Click to collapse
you've posted in four threads that you can't get back to windows. If you shut the phone down and power on again, its simply not believable that you can't get into windows. if you are using an auto bootloader, then it should at least briefly give you an option to boot into windows. so, are you using an autoboot program?

If you happened to install a rom that autoboots android, (I'm guessing, can't see any other reason why a reboot wouldn't work), try turning off your phone, taking out the sdcard, then booting it up.

I'm sorry, but I don't know what to do... There's so many things that doesn't work.. That's why I posted it so many places... I don't know if I am using an autoboot program or not.. I followed the instructions from Youtube that everybody were positive about. And no, I don't get the option to boot into windows when I reboot the phone..

Android boots from your SD card so justtake it out and reboot phone and android wont load up.
Once in there you can uninstall the autoboot or flash a new version of windows or whatever you need to do.

No, that didn't work either... I thought it was very strange, because I heard about people who switched between android and wm... So I don't know what's wrong...

kjessa_83 said:
No, that didn't work either... I thought it was very strange, because I heard about people who switched between android and wm... So I don't know what's wrong...
Click to expand...
Click to collapse
If you take the SD card out like others had suggested and turn your phone off and on, Android won't boot as it runs off the SD card (for the time bing anyway).
No SD card = No Android

kjessa_83 said:
No, that didn't work either... I thought it was very strange, because I heard about people who switched between android and wm... So I don't know what's wrong...
Click to expand...
Click to collapse
If after removing SD card and rebooting you still boot into Android, then you either :
1. have a NAND version of Android (not sure if that's even available now)
2. have an Android phone (top part of Evo looks like Leo)

Sorry, but my SDcard is on the table, and Android is still running... What have I done...?

like i said, you either have :
1. NAND version of Android (not sure if this is even available)
or 2. an actual Android phone (top part of Evo looks like Leo)

kjessa_83 said:
Sorry, but my SDcard is on the table, and Android is still running... What have I done...?
Click to expand...
Click to collapse
Did the youtube video you watched, ask you to flash a new WM rom. Are you sure your not mistaking your new WM rom as android, as it possibly looks different to your original ROM (which if you havnt backed up your data, you've already lost those appointments)
I suggest you watch a video of andriod, and see if it looks the same as your phone.
If it does, and your phone is definetily a HD2 Leo, and Android is running, Do you know anybody that goes by the name of Cotulla?....lol.

MaxSense modification for sense is an Android like interface.

I have neither NAND version nor Android phone...

kjessa_83 said:
As the headline says: I want to remove, or go back to WM, but without deleting everything and go back to scratch... I have some appointments that I want to save, and that I don't have anywhere else... (I can't find them now that Android is running...)
Please, please help me...
(Could the software make my appointments disappear?
Can somebody see if these software information is 'correct':
OS Version
5.2.23138
Manila version
2.5.20183025.0
ROM version
18.Sep.2010 WWE
Radio version
2.07.51.22_2
Protocol version
15.32.50.07U
Click to expand...
Click to collapse
Are these settings showing on your phone Under settings / about phone / software information?? If so you are in WM, not Android. And sorry to say you have lost your appointments, unless you backed them up using PIM backup or something similiar, which im guessing from this thread you didn't.

Just by looking at this Ive determined that the OP doesnt really know what he is doing at all. The software information that he posted indicates he flashed a custom WM rom (probably energy) and thinks its android.
kjessa_83: You are running a custom version of WM, NOT android!! If you want to go back to the original rom, I suggest you find the official rom, and flash that. Btw, if you cant tell the difference between WM and android, maybe you shouldnt be messing around with the phone...

The folder that I copied to my SDcard is called Android, so how come it's WM?

bobmarsh72 said:
Did the youtube video you watched, ask you to flash a new WM rom. Are you sure your not mistaking your new WM rom as android, as it possibly looks different to your original ROM (which if you havnt backed up your data, you've already lost those appointments)
I suggest you watch a video of andriod, and see if it looks the same as your phone.
If it does, and your phone is definetily a HD2 Leo, and Android is running, Do you know anybody that goes by the name of Cotulla?....lol.
Click to expand...
Click to collapse
Cotulla? huh, why?

It's for sure that I don't know what I'm doing... But I thought that if I did what "autotradeking" did in his video, I wouldn't do anything wrong...??

[Q] HELP PLs I can't INsTAll AnDRoid On my HD2!

I can't install android on my hd2 I already installed HSLP3 2.08 also running energy rom
manilla version 2.5.20191914.0
radio 2.12.50.02_2
OS version 5.2.23148
Ive tried so many android builds some times when i run it the little android white letters appear as it should but there shrunk and appear at the left top cornerof my phon ive only been able to run it twice and android worked bt after a reboot it went back to the htc screen for hours and never was able to get it started pls someone pls help me ive been trying to slove this proble for weeks bt haven't been able to solve it please some help me!

format your sd card then try again. or flash different rom like chuckydroid or vbnrom.

ive tried that too no results

hello
iabf said:
ive tried that too no results
Click to expand...
Click to collapse
energy rom is just fine, try 2.12.50.xxx radio, donwload the android build you want and unzip to desktop on pc, grab android folder and place on root of your sd...... you cant always use the android bootloader on this WM rom unless you edit the startup on android build...... on WM go to start>tools>file explorer> make sure keypads lights are on and hit CLRCAD first, then hit HARET and just let it go all the way, some builds take longer on first boot cuz data.img is being created so wait bout 5-10-15 min ........ dont forget to turn off auto backlights on WM before doing all this.. good luck...

Maybe a change back to HSPL2 would help..

Do you happen do have extended battery?

ive done tha many times bt it just goes into these really small letters at the left top corner of tha phone it doesn't load up like other android boots ive seen and it goes to htc screen what culd it bcuz it never loads up after hours

hello
iabf said:
ive done tha many times bt it just goes into these really small letters at the left top corner of tha phone it doesn't load up like other android boots ive seen and it goes to htc screen what culd it bcuz it never loads up after hours
Click to expand...
Click to collapse
ok, start all over again.... download and do task29, reinstall your energy rom upgrade radio again, apply settings i gave you and try to boot again..... let me know how it goes

What type of sd card are you using, try a different sd card... That eliminates the sd card as the culprit.

I have the original 16gb sd card that comes with the phon and im sure its not corrupted bcuz it works great

can u explain a little better what kenel and linux is or if i hve to update tha too i really dont undestand what that really is?

matutemhn said:
energy rom is just fine, try 2.12.50.xxx radio, donwload the android build you want and unzip to desktop on pc, grab android folder and place on root of your sd...... you cant always use the android bootloader on this WM rom unless you edit the startup on android build...... on WM go to start>tools>file explorer> make sure keypads lights are on and hit CLRCAD first, then hit HARET and just let it go all the way, some builds take longer on first boot cuz data.img is being created so wait bout 5-10-15 min ........ dont forget to turn off auto backlights on WM before doing all this.. good luck...
Click to expand...
Click to collapse
Hey Ill be installing android soon when I get back my phone from warranty, and I dont know what auto backlights are(my motherlanguage isnt english) and how to turn them off?
Can you tell me?

Also explain if it is a hd2 with 320mb ram
Sent from my Desire HD using XDA App

OK i got Mdeejay_FroYo_HD_v._3.7 to work on my phon but it sais it cannot connet to the internet does anybody know what files i should change or how can i fix this? pls help

InterNet ExpLorer dont work on android how can i fix this?
i got Mdeejay_FroYo_HD_v._3.7 to work on my hd2 but everytime i trie to go to the internet it says there is no connection avaliable how can i fix this ploblem pls someone help?

This is what i did
I flashed the newest hard spl i think it is number 3.0 and changed the radio to 2.12.50 and after i put energy rom on it what will upgrade my ram to 570 or something. I am very happy with that rom very fast and stable. Now im using FroyoStone Sense - V3.2][Kernel: linux_on_wince_htc 2.6.32.15] from darkstone.
Im sorry for all the winmo 6.5 hardcore users. I tweaked and played with it for a time now. But now im using froyo from my sd card (very fast and stable) I want nothing else. I hope there will be a rom soon so i can cook a android rom on my hd2 leo. I think the biggest reason for me is the amount of good quality apps.
Peace out.

[Q] [problem] Android wont install

hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,

clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?

bravo261 said:
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
Click to expand...
Click to collapse
yes i have the android folder on the root of my card,
yes i tried an other card
yes i do follow instructions all the time

hopefully someone else will reply then. i'm also using an energy rom, and i just hit clrcad and then haret and i end up booting into android after the initial setup time.

what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss

frostmore said:
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
Click to expand...
Click to collapse
i also have .50 for the rado version and i tried many ROMs but no luck, i also reflashed my phone

abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.

Check you RAM in WM. If it's 320mb, you can't run Android for now...
Sent from my Desire HD using XDA App

malaeus said:
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Click to expand...
Click to collapse
all done but still the same problem, task29, update radio, update ROM, flash,

what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.

frostmore said:
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
Click to expand...
Click to collapse
- htc leo 576 MB RAM size
- Manila version 2.5.20181527.0
- radio 2.08.50.05
- Rom thedarkone (dexter)
- Model # HTC HD2 T8585
- OS 5.2.23148

I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta

abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort

Hi - I think your response here may have answered my thread as well The end of this dream..
http://forum.xda-developers.com/showthread.php?t=859504

There one thing you can do to run Android on your HD2. yes, I have an HD2 too and currently T-Mobile. 8 month experience with it.
I noticed your Radio is 2.08. There is a latest version which is 2.15.50.14. If you flash your radio, it might going to work. Try it though.
Since you already got HardSPL, you are good to flash radio. Get the 2.15.50.14 in the link: http://forum.xda-developers.com/showthread.php?t=611787

[Q] SD android on official WM6.5 Rom???

Hello all, i dont post often but i have a question...
I have the HTC Leo HD2 512MB Flash Version.
It has a genuine Official WM6.5 Version / Build Installed...
Can i use any of the SD android versions with it? It is running with radio 2.07.51.22_2
How would i get a SD version of android (that boots from WM) to work...
Do i need to install a un official rom for it to work???
the problem is, i start the CLRCAD then i run haret.exe but then it starts with the code lines... it says somthing in green, followed by 1000's of white lines of code then it freezes, the screen looses power, and the linux icon / code screen never appears - the green light flashes and the screen powers down with two virtical lines on the left that eventually fade. I have to soft reset it but this happens with EVERY SD android i try...
Please Help

There are stickies that you should read if you have to ask this question. Spend the time now. Just warning you.
Your rom should be fine but the radio is not. That is your problem. You need a x.xx.50.xx series radio. It needs to be at least 2.8.50. For that you need HSPL.
Start with this thread.
http://forum.xda-developers.com/showthread.php?t=732380

Sorry its abit late but thanks
Agoattamer said:
There are stickies that you should read if you have to ask this question. Spend the time now. Just warning you.
Your rom should be fine but the radio is not. That is your problem. You need a x.xx.50.xx series radio. It needs to be at least 2.8.50. For that you need HSPL.
Start with this thread.
http://forum.xda-developers.com/showthread.php?t=732380
Click to expand...
Click to collapse
Thanks - i used a NAND version in the end -
I know about the 'stickies' rule thing BUT some threads are rubish - no offense - like having a load of rabble about a rom then no propper link or instruction to the required files...

Also the amount of forumposts scares me off sometimes - so much choice...