After every soft reset, my pop3 email account disapear.
Could anybody help me ?
You probably have this problem along with a "no gsm" appearing on the screen after a soft reset (where the rom version should be), no IMEI number on your phone details (somewhere in settings I believe) and your WAP/GPRS settings gone.
check this topic: http://forum.xda-developers.com/viewtopic.php?t=36730&highlight=
read till the end for a solution:
akpe said:
Now, I think I've found a way to overcome the "no gsm"/vanishing IMEI/vanishing WAP/GPRS user-pass/etc problem, so you won't need to enter your email accounts again...ever...
After I uninstalled some programs and soft reseted it gave me a "no gsm" again... I hard resetted using the stulys as fast as I saw the "no gsm" during the boot, and kept resetting until it booted normally. When I went to check my network connections, usernames and passwords were still there... plus on sync it did not ask me again for my exchange password...
Again: always soft reset using software buttons (like SPB pocket plus) and any time you soft reset be ready to reset again if a "no gsm" appears where your ROM version should
I can't explain it but I believe it has to do with not letting WM5 boot up in "no gsm" mode :roll:
Click to expand...
Click to collapse
the new qtek/imate rom with AKU2 seems to solve the problem
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.
I am selling my HD2 and it has WP7 on it and I'd like to delete all my user data from it. How do I do this?
Settings --> about --> reset your phone
For the life of me I can't get my phone reset.
Task29, redid the hole, including a fomat (on my PC) of the SDcard
VolUp+VolDown during the 1234, got the message so twice voldown
Settings, about, reset your phone
No metter what I do I don't get the initial setup screens.
What the hell am I doing wrong???
Any help is appreciated.
Cheers,
/Cacti
le_cactus said:
For the life of me I can't get my phone reset.
Task29, redid the hole, including a fomat (on my PC) of the SDcard
VolUp+VolDown during the 1234, got the message so twice voldown
Settings, about, reset your phone
No metter what I do I don't get the initial setup screens.
What the hell am I doing wrong???
Any help is appreciated.
Cheers,
/Cacti
Click to expand...
Click to collapse
Are you trying to completely remove WP7 from off your phone and go back to some other rom?
My home WiFi router SSID has stopped being listed on my HD2. It has been working normally for 4 months. I can't think of one particular change I have made to my device that preceded this problem.
I have a Virgin Superhub which doesn't need to be in a "pairing" mode to accept connections. I have soft reset my HD2 and restarted the router without change. My laptop sees the SSID normally.
I am using YUKI's ROM.
Has anyone else had a similar experience?
Try different rom that one seems to have alot of odd problems
once i manualy changed the boadcast channel of my router and my hd2 couldn`t see the router either.
Hard Reset
May be a silly question...but...does the Hard Reset from within WP7 settings pages work OK with magldr?
fillippe said:
May be a silly question...but...does the Hard Reset from within WP7 settings pages work OK with magldr?
Click to expand...
Click to collapse
yes, it will only reset wp7 to factory default. will not erase magldr.
Thanks
G4: I'll try a hard reset first and maybe a Green Mango ROM next.
Hyellow: Thanks for the answer.
Hard reset did it, but now flashed XBMOD-YUKI rom which is ace.
Hello, I have a problem with the radio, the radio turns on for a while and then goes out, sometimes it works longer.
The second thing is that sometimes it won't start and you need to press the reset button to enable.
It happened because I changed the start screen wallpaper in factory settings, saved and restarted, and after restarting it does not turn on. After what time it turned on and this problem appeared
after trying to update the system such an error
Hard to tell what's the problem from your short description but the error you get on the update would seem to be from the said update not being compatible with your radio. You should contact your seller and ask for the correct update.
nic2k said:
Hard to tell what's the problem from your short description but the error you get on the update would seem to be from the said update not being compatible with your radio. You should contact your seller and ask for the correct update.
Click to expand...
Click to collapse
I have a file from the seller
can it help you install a completely new system?