Related
Hi all,
Before I post here I have googled over the internet looking for a solution and i have read alot but no success, i have tried many different suggested solutions but all have failed, so that I'm here to ask who have faced a similar situation of me.
My HTC HD2 was having SPL-1.42 with its original stock ROM, then I decided to upgrade for a cooked ROM so that I installed the HSPL then it became SPL-1.42 HSPL, that was fine then I'm were able to upgrade to any cooked ROM, I have flashed my device with many different ROMs even the stock ones, every thing were very fine till I upgraded to the stock ROM of leo 2.10 "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship" by via the MicroSD card and now stuck with the SPL-2.08 as shown in the attached photos.
I tried to flash again using the EXE file from my PC but it take very long time the fail even with the original stock ROM of my device, and I tried to flash using the SD card but it take very long time just showing a white screen labeled "loading..." and no more activity.
I attached some photos showing the problem.
I know its my fault because I did not read the warning in the text file that included with the ROM folder "Do not flash using the MicroSD"
So that, I'm looking for a solution... please help..
any help will be appreciated.
Thanks in advance..
Note: pardon me about my poor English.
xda_q8 said:
Hi all,
Before I post here I have googled over the internet looking for a solution and i have read alot but no success, i have tried many different suggested solutions but all have failed, so that I'm here to ask who have faced a similar situation of me.
My HTC HD2 was having SPL-1.42 with its original stock ROM, then I decided to upgrade for a cooked ROM so that I installed the HSPL then it became SPL-1.42 HSPL, that was fine then I'm were able to upgrade to any cooked ROM, I have flashed my device with many different ROMs even the stock ones, every thing were very fine till I upgraded to the stock ROM of leo 2.10 "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship" by via the MicroSD card and now stuck with the SPL-2.08 as shown in the attached photos.
I tried to flash again using the EXE file from my PC but it take very long time the fail even with the original stock ROM of my device, and I tried to flash using the SD card but it take very long time just showing a white screen labeled "loading..." and no more activity.
I attached some photos showing the problem.
I know its my fault because I did not read the warning in the text file that included with the ROM folder "Do not flash using the MicroSD"
So that, I'm looking for a solution... please help..
any help will be appreciated.
Thanks in advance..
Note: pardon me about my poor English.
Click to expand...
Click to collapse
Heya i think ur stuck now on that SPL 2.08 havent heard any1 succeeding in putting hspl on it atleast from what ive read.
The cause is because u flashed that Tmous ROM trough MicroSD which overwrites the hspl.
I think if u had read the stickies more carefully this could be avoided but u can still flash Tmous roms some1 correct me if im wrong. hope this helps a bit
Thanks for replaying,
yeah you are right I have to be more careful but now its done and stuck with SPL 2.08.
anyway, I have tried to falsh it using Tmous ROMs but it faild, it says "this device is not suitable for this ROM" then exit, by the way, my device is the Asia version and I tried to flash it using the new officially updated ROM from htc.com but it also failed, it take very long time more than 15 minutes with no activity the I disconnect the USB from the device to save the battery charge, I'm afraid to stuck with a dead battery. When I disconnect it the upgrading software on my PC asking me to restart the device and reconnect it again then I did, the official upgrading software recognise the device then start to flash it but it stuck at beginning of the flashing process it just change the screen of the device to the back background with the progress bar its reading 0% and take very long time then i disconnect it.
by the way, is the any way to downgrade the SPL to 1.42 ?
any help please..
Thank you.
Last week I also face this problem. But I'm not using SD card to flash the room.
However, I backup my sd card then format the card, it become will afther this.
Same thing happened to me. This is what I did, removed the battery for about 10 seconds and flashed the original ROM. Then reflashed HSPL. It worked for me.
Thank you all for replaying..
I tried to do as you did but no success at all.
well, what next ?
Thank you
silentP said:
Same thing happened to me. This is what I did, removed the battery for about 10 seconds and flashed the original ROM. Then reflashed HSPL. It worked for me.
Click to expand...
Click to collapse
i believe to try to flash Original Rom from SD Card. not from PC.
i personally save my stock rom in SD card for future use in case of emergency.
Thanks for replaying
I tried to flash using the stock ROM is SD card but it failed, it shows a white screen with a "Loading..." word only, no activity.
Any help please..
You must use GoldCard repaired your device .Look here (Post 31 & 41) Repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card :
http://forum.xda-developers.com/show...=640183&page=4
You must change Tmous 2.07 ( in guideline article ) replaced by your ship rom 2.10.
same happened to xmoo....just letter xmoo about your problem...i hope he can help you....
ancola66 said:
You must use GoldCard repaired your device .Look here (Post 31 & 41) Repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card :
http://forum.xda-developers.com/show...=640183&page=4
You must change Tmous 2.07 ( in guideline article ) replaced by your ship rom 2.10.
Click to expand...
Click to collapse
Ok this is solution for that problem
no success yet..
but i'm confused about how to use the goldcard ?
I tried to you the attached goldcard.img from the post Id=640183&page=4 but no success.
is the goldcard.img dedicated to a specific device based on its CID ? or it can be used for any device ?
Thank you
Surely XDA Mods should take down the SD card method as there are about 10 threads a week of flashing the 2.10 ROM via SD card and getting stuck cause they don't read enough before hand - if the SD card method isn't there people won't brick their phones!!
{Solved} HTC HD2 stuck at beet loader...
Hi all,
finally I got my device running
by flashing it using Goldcard method, I bought the PSAS software and flashed it using Tmous 2.10 and now it is running fine.
well, the steps as the following:
1- getting the CID of the SD card that you are going to use for flashing you device, I used linux OS to get the CID of my SD card by:
linux host #>more /sys/class/mmc_host/mmc1/mmc1:*/cid
that will give you the CID of the SD card.
2- Start the PSAS software and must be registered then go to Calculations/Generators then select Generate HTC goldcard.
3- then click "Save Goldcard Image to file", rename it whatever you wanna name for example "goldcard.img".
4- Use HxD Hex Editor, then select Extras from the menu then Open disk image..
5- Use HxD Hex Editor, then select Extras from the menu then Open disk...
6- then click on "goldcard.img" tab then select the lines from 00000000 to 00000170 all the file content by high lighting it, then select Edit -> Copy.
7- then go to the disk tab the containing the sd card, then select the same addresses (00000000-00000170) then Edit -> Paste Write, then save the new content.
8- copy a leoimg.nbh to the SD card, its recommended to get it from the ROM that bricked your device. I'm used Tmous 2.10.
9- insert the SD card into your device then boot it to the bootloader by holding the volume switch down while your switching the device on.
10- wait for the menu to appear and follow the instruction to complete.
Thats work from me and should work for you.
by the way, I flashed US Tmous while my device is Asian.
Thank you all
and
Best regards
if you have your CID I may help you to generate the suitable goldcard.img for your device.
I think I've read that even though you are stuck on spl 2, now that you have it running you should be able to flash roms with sspl but you won't be able to change the radio.
HTML:
till now I'm not sure about the radio, any way, I'm trying to hack it, i successfully initiated the process of radio upgrading but it failed at 99%.
we gonna do it one day...
EddyOS said:
Surely XDA Mods should take down the SD card method as there are about 10 threads a week of flashing the 2.10 ROM via SD card and getting stuck cause they don't read enough before hand - if the SD card method isn't there people won't brick their phones!!
Click to expand...
Click to collapse
I tought I read througout numurous posts that the SD method is the prefered way to go?
xda_q8 said:
Hi all,
finally I got my device running
by flashing it using Goldcard method, I bought the PSAS software and flashed it using Tmous 2.10 and now it is running fine.
well, the steps as the following:
1- getting the CID of the SD card that you are going to use for flashing you device, I used linux OS to get the CID of my SD card by:
linux host #>more /sys/class/mmc_host/mmc1/mmc1:*/cid
that will give you the CID of the SD card.
2- Start the PSAS software and must be registered then go to Calculations/Generators then select Generate HTC goldcard.
3- then click "Save Goldcard Image to file", rename it whatever you wanna name for example "goldcard.img".
4- Use HxD Hex Editor, then select Extras from the menu then Open disk image..
5- Use HxD Hex Editor, then select Extras from the menu then Open disk...
6- then click on "goldcard.img" tab then select the lines from 00000000 to 00000170 all the file content by high lighting it, then select Edit -> Copy.
7- then go to the disk tab the containing the sd card, then select the same addresses (00000000-00000170) then Edit -> Paste Write, then save the new content.
8- copy a leoimg.nbh to the SD card, its recommended to get it from the ROM that bricked your device. I'm used Tmous 2.10.
9- insert the SD card into your device then boot it to the bootloader by holding the volume switch down while your switching the device on.
10- wait for the menu to appear and follow the instruction to complete.
Thats work from me and should work for you.
by the way, I flashed US Tmous while my device is Asian.
Thank you all
and
Best regards
if you have your CID I may help you to generate the suitable goldcard.img for your device.
Click to expand...
Click to collapse
I also bought PSAS and used my old TP to goldflash the card. Then flashed it with the TMOUS ROM using SD method. After that it game back to life and only way to flash other roms is using sspl. Only thing now is that I'm stuck with this TMOUS initial splash screen.
Also you can change the splash screen using SSPL,till now you can change what ever you wanna change using SSPL except the radio and SPL flashing.
now i'm looking for flashing the radio with some how.
tamAyT:
SD card method should be used a last resort and only if you know what you're doing - it's a million times easier to use HSPL and ActiveSync as if it fails it's easy to recover. I've never used the sd card method and after reading what it can do if you don't read into the ROM well enough it's not worth the hassle IMO
BladeKnight said:
same happened to xmoo....just letter xmoo about your problem...i hope he can help you....
Click to expand...
Click to collapse
HAHAHA.
For me changing the first 2 00 in de hex edit of the goldcard to 11 fixed the issue.
Radio 2.08 is greate.. SPL 2.08 is greate... So no problems a.t.m., if I need a stock rom I use SSPL...
But then again I hope someone comes with HSPL 2.x tho.
i just recently got a new hd2 wich run 2.13 rom software and im haveing trouble getting it downgraded so i can put hspl on it. I know this has bean mentioned before and looked and tried everything i found abot it. My dads pc is a 32bit vista home edition can every time i load the downgrade it goes all the way into the set up and then gets stuck at 0% and then gives me a 262 error in like 5 mins. I know its a comunication error andi have tried every usb port on the pc. I am getting a clear sync and have no problems getting stuck on the boot screen. I just halft to reset everytime when it says it wont load. I have tried forceing it threw the boot menu but nothing works. The phone runs just fine still and i even did a hard reset to see if that would help.
Plz if somebody can help me i would be verry greatful and i am even willing to donate if i can get the mods for the phone up and running.
Plz respond as soon as possible.
at this stage it doesn't matter that the pc doesn't work...... because you should be flashing the downgrade from sd card anyway.
ok well i tried it once and it just went to a white loading screen and did nothing else. all i did was put the nbh in the sd card so if i messed up mind helping me out.
ok so i just tried exactly what your link told me and it wont go past the white loading screen. do i just had a bad stock rom or what?
did you rename the nbh to leoimg.nbh?
yes i did change and i still just cant seem to get it to go threw
you using the stock 16gb card? loads of posts say that card doesn't work. try an 8 or better yet a 2gb
i have tried i 1,2,and 4 gig and nothing works.
what rom are you downgrading it with?
When you downloaded the rom, did it come as an .exe or did it come as an .nbh file and customruu.exe together? Because if it DID then that wont work, it must be the .exe version.
I recommend the 2.10.0 from the thread
[ROM]Leo 1.5 T-MOBILE Test & Stock ROMS
Have you extracted the ruu_signed.nbh correctly? (you didnt just rename the .exe to leoimg.nbh did you?)
ALso try formatting your sd card, FAT32, not FAT, and for best results do a propper format, not a 'quick' format.
i have done a propper format and its on fat32. i have also extracted the nbh file with 7zip i did not just rename it and i got the rom from a thread that had all the old os versions on this site
killer666666 said:
i have done a propper format and its on fat32. i have also extracted the nbh file with 7zip i did not just rename it and i got the rom from a thread that had all the old os versions on this site
Click to expand...
Click to collapse
assuming you mean THIS thread,, only the ones in that thread that come as an exe will work, the others will need hspl.
When I try to open the downloaded android files on my SD card by tapping first CLRCAD and then HARET I get the following eror message: Files can not be opened due to a not signed trusted certificate or one of its componenets can not be found. Please help I'm getting desperate. Have tried reinstalling everything several times. I have radio ROM version 2.06., maybe that is the reason? Thank you.
You have to allow unsigned apps to perform actions/install in WM
something to do with sdkcerts.cab in windows mobile... dont remember exactly.
Wait for sometime... someone will help you.
jazine said:
When I try to open the downloaded android files on my SD card by tapping first CLRCAD and then HARET I get the following eror message: Files can not be opened due to a not signed trusted certificate or one of its componenets can not be found. Please help I'm getting desperate. Have tried reinstalling everything several times. I have radio ROM version 2.06., maybe that is the reason? Thank you.
Click to expand...
Click to collapse
You answered your own question. New radio is called for I think.
are you running stock if so you need hardspl3 after that you need a custom rom , look for chunkyrom for android it works well , then look in to flashing a radio rom , search and you shall find
oh... forgot Welcome to XDA
Yes, first try changing your Radio to 2.12.50.02_2 (Hope u have hardSPL'ed ur phone)
Looks like you have problems due to ur smartphone not accepting unsigned apps....install sdkcert.cab (search forum) for WinMo
well this problem suddenly started occurring
i've been running android builds for months now and not once have I encountered problems running haret and CLRCAD.
but it suddenly happened yesterday when i tried to run Mdeejay froyo revolution 1.5 for the 2nd time (the first time was successful)
and it started giving me the same error message
radio: 2.15.50.14
Hi all, I faced the same issue above, sudden happen.... Im using Rom 2.15
wow are you guys all noobs?
just download bsb tweaks and enable unknown programs.
its called "Policies" something.. youll find it there.
(btw if you are connected to pc with your phone, disconnect it =\ then try)
HI!
i got a problem installing this android on my hd 2, ive seen a couple threads to see if anyone ells got this problem but didnt seems to find it.
i`ve tryed to runn it from difrent location... same issue apares every time
error: can not oppen file clrcad. either its not signd with the right sertificat, or one of the components do not exist. install file all over or re-oppen if problem remains.
same error ocure when opening the other files for some reason
tryed to:
-format card in all the difrent formats
-delete it and tryed installing from difrent placeses
anyone got a sulution for this problemo of mine? tnx in andvance
This is a Windows issue, and nothing to do with either Android or your SD card.
Search for (and run) sdkcerts.cab
It will allow you to run unsigned apps.
ty for the feedback, i will try
i got it "working" now, well atleast somthing happens when i start the program...
BUT. when i start it it dont seems to work still, the screen start to work for mayby 2 seconds. then it go all black and nothing happens(yes i have w8ed to see if it install in the background)
kinda anoying when it seemsed so easy to install it sight-_-` got a new sulution?
What verion radio are you running? You need to be above 2.08 and have a radio ending .50 not .51
also, if you've tryed initialising android a bunch of times, youve probably corupted the sd card while it attempts to create a new file system. format the card, put the android folder on it, and make sure you have the corect radio etc before attempting again.
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
bravo261 said:
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
Click to expand...
Click to collapse
yes i have the android folder on the root of my card,
yes i tried an other card
yes i do follow instructions all the time
hopefully someone else will reply then. i'm also using an energy rom, and i just hit clrcad and then haret and i end up booting into android after the initial setup time.
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
frostmore said:
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
Click to expand...
Click to collapse
i also have .50 for the rado version and i tried many ROMs but no luck, i also reflashed my phone
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Check you RAM in WM. If it's 320mb, you can't run Android for now...
Sent from my Desire HD using XDA App
malaeus said:
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Click to expand...
Click to collapse
all done but still the same problem, task29, update radio, update ROM, flash,
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
frostmore said:
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
Click to expand...
Click to collapse
- htc leo 576 MB RAM size
- Manila version 2.5.20181527.0
- radio 2.08.50.05
- Rom thedarkone (dexter)
- Model # HTC HD2 T8585
- OS 5.2.23148
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Hi - I think your response here may have answered my thread as well The end of this dream..
http://forum.xda-developers.com/showthread.php?t=859504
There one thing you can do to run Android on your HD2. yes, I have an HD2 too and currently T-Mobile. 8 month experience with it.
I noticed your Radio is 2.08. There is a latest version which is 2.15.50.14. If you flash your radio, it might going to work. Try it though.
Since you already got HardSPL, you are good to flash radio. Get the 2.15.50.14 in the link: http://forum.xda-developers.com/showthread.php?t=611787