Related
Hey people greeting first of all by stupidity i flashed a new radio 32a radio on my 32b mytouch by accident now my phone its bricked it just stay stuck on the first splash scree i cant fastboot or recovery mode my pc dosnt reconize my phone ether what can i do??? Help please
mytouch 3g
32b s on g
slp 1.33.2010
if you cant fastboot/recovery/anything, it's pretty much bricked. If you get some blue LED, there isnt much hope for that either.
i got no blue led it just stay on the first splash screen no recovery mode or fastboot
morepr said:
i got no blue led it just stay on the first splash screen no recovery mode or fastboot
Click to expand...
Click to collapse
Then you're bricked. Means you need a new phone.
no ooo
people there is a solution via the usb when it is stuck at the first splash screen just search
mine is totally bricked and still no solution !!!
call tmobile.
I did the same thing yesterday and I told them that My phone updated itself then wouldnt turn back on.
my new one is in the mail and will be here in 2 days
just act naive and clueless.
as long as your still under warranty, your all good.
thanks ppl i try everything but this its not going no where the pc dosnt want to recognize my phone and i try everything just gonna throug it in the toilet and call the insurence
At least sell it for parts, you can probably squeeze 40 bucks out of it or similar. Check the going rates on eBay for non-functional handsets.
I know its a bit late....but I fixed my 'bricked' MT3G
I was searching around the web for a solution to my problem, and needless to say, there wasn't much out there for me besides the typical... "it's bricked, buy a new phone."
So here's my story:
Earlier today I decided to upgrade my MT3G to Cyanogen's 5.0.7 Android 2.1 rom. I had used the experimental 5.0.6 rom, and found it to be a bit more "glitchy" than I was comfortable with. So, I went online for what I figured to be a very simple upgrade...and downloaded both the rom and a kernel (which was 32A not 32B).
Needless to say, after installing the rom, the kernel, my gapps update, and resetting my phone... it did nothing but hang on the MT3G screen. After about 30-45 min...I knew something was wrong and I freaked. It was unresponsive to multiple attempts to reboot, and was not being seen by my computer.
That's when the online search began... I looked for other individuals who've suffered the same fate and kept coming up with the same "you're screwed" response. Having recovered more "bricked" iPhones in the past than I can count, I knew this could not be the case. For me, as long as the phone turned on and flashed some sort of screen, there's still hope.
So what did I do...
Well, I first attempted to boot the phone into recovery mode...but it would not work. Next, i figured I would try doing a fastboot... and what do ya know... it worked!
From there I used multiple combinations of plugging in the phone via usb and resetting and putting into recovery mode until I found one that worked.
So here's my steps:
(Note: this has only been tested if you accidentally installed the 32A kernel on your 32B device)
1. Power on the phone... If you continuously sit at the green MT3G screen, take off the back and take out the battery.
2. Plug in your USB cable (VERY IMPORTANT, will explain later)
3. Next, replace the battery and hold down both the [home] and [power] buttons, if it merely turns on to the green screen, and you get no response from your computer's usb notification window...take out the battery again
4. Fastboot your phone (hold down [back] and [power] arrows) While your phone in connected to your computer, it should make a notification sound.
5. Restart your phone from Fastboot, AS SOON as it shuts off, hold down the [home] and [power] keys.
6. Continue holding until you hear a notification sound from your computer...at that point it should boot into recovery mode.
7. Wipe your handset (just for good measure) and reinstall your update package...DELETE that wrong kernel from your sd card so you dont make the same mistake again.
Summary:
I have no clue as to why it works, but I've done this 3 times now just to verify, and each time it has worked. For some reason, the USB connection to the handset acts as a precursor to the phone booting. I will stress that without plugging in the USB, my phone did not boot into recovery mode. However, after I did plug it in...Fastbooted....Reset....and Booted into Recovery it worked perfectly.
I am still suffering lags on my device (more so than before) and this could be a product of my stupidity, or this rom being laggy. Either way it works, and I don't have to purchase a new phone!!!
Mod. edit: not dev related, moved to general
I experienced the same problem which can not boot recovery.
I've tried your way above but no luck.
Is there another way?
HTC MAGIC MY TOUCH
SAPPHIRE PVT 32B ENG S-OFF H
radio-2_22_23_02
cm-5.0.7-DS-signed
T-Mobile myTouch 3G - stuck on splash
Today I probably flashed my phone with a wrong (32A) SPL. I can't access fastboot, recovery mode or anything, including access from PC (either Linux or Window$). But it's stuck on splash - if it was totally bricked, would it still load a splash screen? Is there any hope?
Sigh.. I have the same problem.. Blue LED If I hold down the track ball but can't get to fastboot or recovery..
My problem started after I flash the HTC rom from the website.. Sigh.. I think it was the radio that did it..
Anyone found a way to get around this (w/o jtag)?
I am also experiencing the same problems. Blue LED works, cannot get into fastboot, bootloader, or recovery. It just sits on the opening splash screen.
Any other ideas?
Looks like I will just sell mine as a "bricked" device and hope to salvage a few bucks. Sigh
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU. I would keep going but you get the point. I downloaded ROM Manager, and I flashed a Cyanogen Nightly ROM from 11-5-2010 and I got nothing but a Green spalsh screen and a reboot cycle. You instructions ROCK!!!
I went crazy and prayed a few times to unbrick my phone. I tried different things and then nothing worked. So I had the phone on for a bit and it restarted twice and then ran. Just let in sit for a while. Give it time. Maybe itll work for u too. goodluck
have a mytouch 3g 1.2 with the old radio and SPL, i acidently bricked it trying to flash the new radio and SPL and now i cant get into recovery or fastboot and the flash screen is frozen, pleassssssee help me get this fixed it has been completel useless for the last week or so
Succesfully unbrick with wiggler Mytouch 3G 1.2
as Ezterry instruction i follow his guide, and build my own JTAG.
My God its working 100%..
awebagar said:
as Ezterry instruction i follow his guide, and build my own JTAG.
My God its working 100%..
Click to expand...
Click to collapse
Can I ship you my bricked device so you can practice unbricking? I can pay you in random electronics
so ive been flashing roms and have never had a problem till today.
i went to flash the new ava-froyo rom and it went fine and booted right up, and then i tried flashing the new radio and that when everything froze.. it was stuck at the white evo 4g screen...
so i rebooted and it did the same freezein at the white screen..
i rebooted again into hboot, and tried going into recovery and it goes to the white screen again and freezes.
so i only have control in hboot and fastboot. yet i cant get a shell connection. the device is recognized, so im just lost at what to do. been reading for hours and cant figure it out.
thanks for any help.
rdkustom said:
so ive been flashing roms and have never had a problem till today.
i went to flash the new ava-froyo rom and it went fine and booted right up, and then i tried flashing the new radio and that when everything froze.. it was stuck at the white evo 4g screen...
so i rebooted and it did the same freezein at the white screen..
i rebooted again into hboot, and tried going into recovery and it goes to the white screen again and freezes.
so i only have control in hboot and fastboot. yet i cant get a shell connection. the device is recognized, so im just lost at what to do. been reading for hours and cant figure it out.
thanks for any help.
Click to expand...
Click to collapse
Wipe three times wipe wipe wipe if that don't work do whitslack startover method
Sent from my PC36100 using Tapatalk
i cant get into recovery to wipe. do u mean clear storage?
and also, ive been trying to load pc16img off my sdcard, but its not reading. i didnt the sdcard fix and still nothing.. thanks for your help
I kinda had the same issue, try the unrevoked recovery reflash
that's what I did and it worked for me
mine was stuck on the red exclamation point... I tried 5 times by pressing power and +vol buttons, but it was just sitting there for ever...
baiatul said:
mine was stuck on the red exclamation point... I tried 5 times by pressing power and +vol buttons, but it was just sitting there for ever...
Click to expand...
Click to collapse
Are you rooted if not then take battery out put back in hold power and vol down once it goes into hboot pull battery back out then put back in boot up regular way. Happen to me was trying something on non rooted phone went into recovery and got that red! Was like oh man so I did that it v came up hope it works for u
Sent from my PC36100 using Tapatalk
rdkustom said:
so ive been flashing roms and have never had a problem till today.
i went to flash the new ava-froyo rom and it went fine and booted right up, and then i tried flashing the new radio and that when everything froze.. it was stuck at the white evo 4g screen...
so i rebooted and it did the same freezein at the white screen..
i rebooted again into hboot, and tried going into recovery and it goes to the white screen again and freezes.
so i only have control in hboot and fastboot. yet i cant get a shell connection. the device is recognized, so im just lost at what to do. been reading for hours and cant figure it out.
thanks for any help.
Click to expand...
Click to collapse
If all fells do power and vol up hook to CPU HTC sync and try load stock ruu on there
Sent from my PC36100 using Tapatalk
so i can only communicate with the phone thru fastboot..
adb isnt seeing the phone, ive also put a pc36img on my memcard and reboot to get it to load, but it wont load it.. so then i did the sdcard fix and still nothing.. thanks again
ewilson said:
Are you rooted if not then take battery out put back in hold power and vol down once it goes into hboot pull battery back out then put back in boot up regular way. Happen to me was trying something on non rooted phone went into recovery and got that red! Was like oh man so I did that it v came up hope it works for u
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Thanks, that's correct. Not rooted. Thanks.
baiatul said:
Thanks, that's correct. Not rooted. Thanks.
Click to expand...
Click to collapse
Ok yes that's what happen to my friend phone I was just seeing what happen. Man I was like oh my lord got scared thought I brick phone what I did was pulled battery put battery back in holding vol down and power once in hboot pull battery wait a min or so put battery back and boot up normal way it came on I was like whew. If that doesn't work pull battery put back in vol. Up and power while phone hooked to CPU do HTC sync and reload stock ruu let me know if it works
Sent from my PC36100 using Tapatalk
I bought a Rogers HTC Magic for a pretty cheap price. It had The Rogers 1.5 Sense UI update on it. I decided I wanted to root it and load other ROMs, etc. So I read that the easiest method was to use Universal Androot to root it, and ROM Manager (from the Market) to flash the appropriate recovery image.
So, I installed both apps. I first ran Universal Androot and rooted. I confirmed root through ADB and also Super User permissions. I then restarted the phone just for peace of mind. After the restart, I ran ROM Manager. It automatically popped up and asked me if I was running an Ion/My Touch or an HTC Magic. I selected HTC Magic, because that's what this is. So then it flashed the recovery image and restarted the phone. When it restarted it went to the Rogers boot screen for a few seconds, and then started a loop of restarts. That's all it does now. It shows the Rogers screen for a few seconds, goes black and reboots over and over. I have tried booting into HBOOT, Fastboot, and into recovery. I cannot boot into any of them. One thing I did notice is that when I'm pressing any of the combinations (volume down + power, home + power, menu + power) for a very brief half a second right before the phone restarts, the bottom of the screen says "ClockwordMod ..." where ... is the version of the image (I'm at work without the phone, so I don't recall the exact number there).
So, is this thing officially a paperweight now, or is there some sort of hope?
Thanks.
Paul
Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.
adrift02 said:
Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.
Click to expand...
Click to collapse
Okay. That's weird. I mean, my phone is a Magic so choosing the option for the Magic instead of the Ion/MyTouch seemed to make sense.
Anyway, I cannot get anywhere. Holding vol+ and power does nothing, neither does home and power or back and power. Are there any other tricks to getting anywhere beyond this endless restart loop?
Thanks.
Starting to think I'm screwed.
PaulieORF said:
Starting to think I'm screwed.
Click to expand...
Click to collapse
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.
ezterry said:
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.
Click to expand...
Click to collapse
Thanks for the reply!
Right, I cannot get into fastboot or hboot. I'll try running the battery down when I get home today. Interesting idea.
Unfortunately running the battery dead with restarts didn't do the trick.
Any idea if there's any place I can send it to who has the smarts to jtag recover this thing?
Thanks.
me too
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.
tmokeith said:
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.
Click to expand...
Click to collapse
I don't think it's the same thing.
I rooted, loaded ROM Manager and installed the recovery. I was never even able to get into recovery in order to try to load any ROMs.
I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App
nate_benji said:
I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
The phone does not identify itself to the computer, so this doesn't work.
The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App
nate_benji said:
The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Oh yes. I've gone crazy trying every key combination with every combination of taking battery out, plugging it in, USB cable attached, detached, etc.
The phone never identifies itself as a piece of hardware to the computer in the 5 seconds between reboots.
I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.
naparstekk said:
I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.
Click to expand...
Click to collapse
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
I wasn't able to get hboot or fastboot. I pluged off and on the battery in the exact moment when the Logo came out after restarting. The logo was on the screen for the whole time, even while battery plugged off. I guess, i've done it so quickly that phone didn't switched off.
I think i was holding the power+home or power+back buttons all the time.
Can't really rember the exact way, sorry.
PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
Try removing the SD card and booting if its not restarting due to the wrong radio too soon that may help.. if you get into android restore the SD card and run the exploid process I posted a bit back for rogers magics, or the older goldcard method.
I've played around with taking the battery out and putting it right back in at all different times during the booting and can't get the phone to behave any differently. Iv'e tried it with SD card in and SD card out, USB cable in and USB cable out. I can't get anywhere.
I did notice that the phone does show up as an Android device for a second when it's booting. Tried to catch it in adb but no luck.
Starting to think this thing is shot. Any other ideas?
Just so everyone can see what's happening, I recorded a video and uploaded it. Linked below:
http://www.youtube.com/watch?v=hPoxMzm0MVU&hd=1
try to hold and KEEP holding the back + power... Not volume down!
Don't push and release like you did in the video.
So here's the problem, I wanted to flash the cyanogenmod rom to my wildfire, which was running the sunaabh rom. Nothing wrong with it though, just wanted to try something new. So I made a nandroid backup. All's well and I wiped clear and proceed with the flashing. After a while the installation seemed to stopped at a point, I thought it was just installing so I left it there. After a whole hour it was still stuck. So I did the stupid thing a pulled the battery out. Now when I boot the screen is black but the vibrate noise of the startup is still there (silent boot) and the buttons light up, which I'm thinking it boots up fine. The problem is that the screen is blank even when I go to the HBOOT menu. Tried flashing a RUU but the program couldn't recognise the phone. I'm stumped now.
So what should I do?
nachos011 said:
So here's the problem, I wanted to flash the cyanogenmod rom to my wildfire, which was running the sunaabh rom. Nothing wrong with it though, just wanted to try something new. So I made a nandroid backup. All's well and I wiped clear and proceed with the flashing. After a while the installation seemed to stopped at a point, I thought it was just installing so I left it there. After a whole hour it was still stuck. So I did the stupid thing a pulled the battery out. Now when I boot the screen is black but the vibrate noise of the startup is still there (silent boot) and the buttons light up, which I'm thinking it boots up fine. The problem is that the screen is blank even when I go to the HBOOT menu. Tried flashing a RUU but the program couldn't recognise the phone. I'm stumped now.
So what should I do?
Click to expand...
Click to collapse
try taking sd card out and boot into hboot
May be restoring the nandroid could help. I am not sure, but you can try.
Sent from my HTC Wildfire using Tapatalk
he can't get to the nandroid though if he can't get into recovery,
have you had any luck nachos?
Well, it seems that the screen is the problem. It took a lot of reboot and pulling battery's but finally the screen was fine. Cyanogenmod seems to run fine too. But the screen would respond really slowly when I wake it and when I power it off, I'll have to be lucky again to get the screen running again. I did the smart thing and flashed a RUU (it can detect the phone now) and sent it to the shop to get it repaired. Oh well, thanks for your help! I really appreciate it
Quite strange...I had similar issue when I first flashed my HTC Desire where the screen was just blank, but it was at the time when the Desire moved from AMOLED to SLCD and some of the flashing caused it not to work...I thought I also bricked my phone but then flashed again then worked. Created a GoldCard just in case...good luck and just be aware that some phones may require a GoldCard to flash properly.
nachos011 said:
Well, it seems that the screen is the problem. It took a lot of reboot and pulling battery's but finally the screen was fine. Cyanogenmod seems to run fine too. But the screen would respond really slowly when I wake it and when I power it off, I'll have to be lucky again to get the screen running again. I did the smart thing and flashed a RUU (it can detect the phone now) and sent it to the shop to get it repaired. Oh well, thanks for your help! I really appreciate it
Click to expand...
Click to collapse
So what you were facing was the black screen and everytime you put the battery back in and hit power it would vibrate 3 times? I am having the same problem. I was actually flashing it with this and it shut down and now I can't get it back on. But you say that after pulling the battery and replacing it numerous times it came back on?
Ive been trying to flash MAG and what not so i could flash droid. Aanyways the first time i tried to flash mag and hspl it would get stuck at the tmobile screen, then i reflashed stock and tried it again, same thing happened. so i reflashed back to stock again. Now i installed hspl again, and this morning when i tried to flash mag, it didn't fully responde.
I connected via activesync, ran the ruu. it recognized the phone, rebooted it to the tri color screen, then the program shows status bar for flash, my HD2 shows the status bar, but Neither of them move from 0%.
the phone powers on and im able to use it, but it wont communicate with my computer once it hits that status bar.
Any idea?
hopefully it can be fixed
No one wants to chime in?
Nevermind, don't know what happened over night, but just got android nand done...
hehe, see? no need for any responses! and doesnt it feel better to fix it yourself?? evening flashing is dangerous, ive pulled the usb, pulled the battery, flashed the wrong roms, allsorts, late at night.
oh no, it'd be great if infact i did fix it myself... but it fixed itself over night, so im out ruled on that one.... it hates me.