Database Users

[Q] Restore to default ROM

I'm trying to restore my Acer Iconia A500 back to the stock/ original ROM so that I can grab the official update in July. Is there any way to do that? I really like the custom ROMS, I just want to revert to see what it was like.

Mestiza5683 said:
I'm trying to restore my Acer Iconia A500 back to the stock/ original ROM so that I can grab the official update in July. Is there any way to do that? I really like the custom ROMS, I just want to revert to see what it was like.
Click to expand...
Click to collapse
And, of course you made a backup via clockworkmod???? eh?
Why are so many not making backups of their tabs before installing unknown software?
There's lots of threads about this in the forums with instructions already. And this belongs in the General forum, not development.

Yes I'd also be interested in this. I have the droid x so when ever I want to revert to factory settings theirs a program on the computer (rsd lite) I use to revert it. So I almost never backup my roms. Now on my iconia they don't have such program. At least that I know of. So I flashed a rom on my iconia and didn't make a backup of my current one. I tried fixing it by flashing stock_acer a500.zip I thing by dexter don't quote me on that one. But it was the emea version so now its stock european and I live in america. Help is apreciated.

I'm a flashing person that has flashed many times on my phones. I forgot to make a nandroid backup of my original rom myself...so I'm not judging. I would say, flash honeyvillian, as its the closest thing to stock I've seen.
But, if your already flashing, I wouldn't want to grab the official anything...someone will post it once it comes out.
Sent from my A500 using XDA Premium App

I want to flash it to the latest stock. So when ota 3.1 is released, I could rest assure knowing that my device would get updates ota.

Euclid's Brother said:
And, of course you made a backup via clockworkmod???? eh?
Why are so many not making backups of their tabs before installing unknown software?
There's lots of threads about this in the forums with instructions already. And this belongs in the General forum, not development.
Click to expand...
Click to collapse
because we are impatient and stupid
I am running to get someone with a tablet of my country to get back the STOCK ROM in case of... I am going to see if I can deal with the shop to root and recovery on SD Card the stock rom so I will be able to have the stock rom...

For USA version 1.104.02, Check out this post.. You'll probably want to skip flashing the stock recovery until you know the system will boot normally.. So from this post, run itsmagic, flash boot, flexrom and system, in that order. Preferable from an adb connection. The tablet will freeze while flashing system. Give at least 5 mintues to make sure it's complete.
You may need to do a data wipe if it bootloops (that's why you should skip flashing recovery). Once it's booting normally, you can flash the stock recovery if you want.
Alternatively, you should be able to replace the files in dexter's stock update zip with these files. But I haven't looked at that zip, so I don't know if system is an image file or a archive file.

Thanks for the replies quick question though. How do in run its magic is their a command for ADB or do I acess it via clockwork recovery?

Respawntime said:
Thanks for the replies quick question though. How do in run its magic is their a command for ADB or do I acess it via clockwork recovery?
Click to expand...
Click to collapse
You download it from the itsmagic thread in the development form and follow the directions in that thread.

Euclid's Brother said:
And, of course you made a backup via clockworkmod???? eh?
Why are so many not making backups of their tabs before installing unknown software?
There's lots of threads about this in the forums with instructions already. And this belongs in the General forum, not development.
Click to expand...
Click to collapse
I too would like to restore to the 3.0.1 stock rom, however my backup of the stock rom got corrupted somehow. I know it had to be something I done, but know not what it was I did. Any help would be much appreciated. Or would it be a better idea to flash the 3.1 leak?

Many questions.

I have an iconia tab getting shipped to me as of this post. I fairly knowledgeable about rooting and roms ( have done many roms and recovery from my cell phone).
I am sorry if some was explained on different threads, figured I would just ask them all here.
Since I haven't messed with the os at all, is there a lot of advantages from stock os to custom os?
Is there any reason to create a ext partition on sd.?
Is custom recovery installed easy, hopefully not uninstall to easy.?
Is there anyways to get data from Titanium backup on the tablet.
I am sure I may have a few more questions when I receive the tablet.
Any help on these questions would be great.
Sent from my LS670 using Tapatalk

All your questions are answered in the forums. You'll get your answers MUCH faster if you follow the rules and actually search before asking.
To be helpful, I'll give you ONE of the answers.
Custom recovery is very easy to install IF you don't have a 3.2.1 ROM preinstalled. If you have this version, you can still install but it's a more complex process. Read the guides in the development section and DO NOT attempt to use ROM manager or a generic CWM.

if you root you can use drivemount to be able to use external hd's formatted in ntfs. Which is the reason I rooted.

1. There's no general answer, as it depends on the ROM you use (some are more-or-less stock, others aren't even based on Acer stock)
2. I haven't had any reason to do anything like that, as I keep basically only my apps (with their data) and my linux chroot on the internal memory... Other than that, search the forum for instructions on how to switch internal <-> external memory (just a config hack, nothing spectacular and completely reversible)
3. It used to be almost ridiculously easy, but a recent update made it more complex. Details are in the forum (and partly in FloatingFatMan's post above).
4. As Titanium backup even runs fine on ICS, you'd expect it to work on HC... which it does.

FloatingFatMan said:
All your questions are answered in the forums. You'll get your answers MUCH faster if you follow the rules and actually search before asking.
.
Click to expand...
Click to collapse
I did do a some searches already , and found a lot of information. The people here are always helpful so I thought instead of just asking one question that I didn't know the answer to I would ask all of them I had.
To be honest I do love loading roms and enjoy the phone rooted atm, but a tablet is much more expensive device and want to try to avoid any conflicts with roms (There are so many I do not know where to start).
Here is my plans on the tablet atm.
Root it, load custom recovery (Clockwork?)
Doing a Nandroid backup of stock rom.
Loading Titanium backup and possibly transfering some data from the phone SD to acer sd, such as psx roms, and other misc stuff.
will look into different roms and see what works for my needs and hopefully avoid the rom cycle that I see with phone roms ,( Seems 3 month and support drops and different projects happen).
Plan on trying stock rom a little rooted before going into custom roms.
This is my current plan, but if anyone else has some suggestions that would be great.

FloatingFatMan said:
Custom recovery is very easy to install IF you don't have a 3.2.1 ROM preinstalled.
Click to expand...
Click to collapse
No, actually its still really easy you just have an extra step.
download the 3.0 downgrade
place it on sd card root directory
reboot holding volume down and power
?????
profit!
after that, just run iconiaroot and acer recovery installer (install both before downgrading) and you're golden, root with CWM. flash a rooted 3.2.1 stock or custom, its that easy.
you are right about one thing though, you can easily find the answer to every question in this thread on these forums.
edit- also, TC, i've found the most stable and functional roms to be stock. i ran a few customs (the best of which was flexstriker) but always found stock to run better and be the most stable, both the rooted 3.2.1 a500 rom and the rooted 3.2.1 a200 port have been great for me. you can go custom if you want, I'm just putting in my two cents.

[Q]Won't update to Android 3.2.1 over FOTA / need original stock ROM

So first of all my tablet is brand new and not rooted and I don't want to root it.
When I got it I could update it instantly from 3.0.whateverwastheversionatthetime to android 3.2 (build 7.006.01_COM_GEN1) but it won't go from there to 3.2.1 which I hear is available for my location (France) The update tool tells me that my firmware is up to date.
I've tried a factory reset as advised by Acer customer care services but it wouldn't change. Also no matter what I do (empty cache etc.) the market won't update to Google Play Store and I think the two issues are related.
So I have two (or rather 3) questions:
1) Does anyone know a way around to force the update? (I doubt it's possible but hey "l'espoir fait vivre")
2) If not can I install a stock ROM without root and NOT compromise the warranty?
3) Where can I get such a ROM? I have searched here and here but 3.2.1 is not on the first thread and the links on the second thread are broken, plus I want to make sure that the ROM is the proper one for my region and that comes the ICS OTA update I will have no troubles doing the update.
Thanks in advance to those who will answer.

lunaticwraith said:
So I have two (or rather 3) questions:
1) Does anyone know a way around to force the update? (I doubt it's possible but hey "l'espoir fait vivre")
2) If not can I install a stock ROM without root and NOT compromise the warranty?
3) Where can I get such a ROM? I have searched here and here but 3.2.1 is not on the first thread and the links on the second thread are broken, plus I want to make sure that the ROM is the proper one for my region and that comes the ICS OTA update I will have no troubles doing the update.
Thanks in advance to those who will answer.
Click to expand...
Click to collapse
1) No you cannot force an OTA
2) It depends - others have reported returning there acer with no probs -, i think someone has even returned it rooted and been ok. These things are fairly bulletproof, and really hard to 'brick'. As long as you can read, follow a few steps you shouldnt have any probs. The worse thing you can do is try 2 or 3 different methods all at once because something isnt working right. You're best to pick one and stick with it, if you have probs ask for help in the thread you got the rom from or start your own like you have here
3) The update.zip method from the first link you posted "should" work. Did you "decrypt" the file you downloaded before extracting the update.zip??
You could try timmyDeans v4 method- it will install a stock 3.2.1, it is rooted but you can remove root using the tools he provides. Beware though this will wipe all data so backup anything essential.
The update.zip method will leave your data and settings intact
As always the choice is yours, there are some really excellent custom roms out there - I enjoy the best of both worlds with a backup of my trusty stock 3.2.1, I flash to my hearts content knowing I can always go back to it when the OTA update is out!!! Oh the joys of root priveleges

Thanks for your input, I'll make sure to try all this when I get back from work. I've a few additional questions:
1) If I install a custom rom, will the OTA work from this ROM or, comes the OTA, will I have to restore my actual Stock rom and then proceed with the OTA?
2) I haven't tried the rom on the first link I gave because it is modified and I was searching for the original, pristine, untouched stock ROM for 3.2.1
I've seen such roms around here on xda for 3.2 but none for 3.2.1, if anyone stumbles upon one please let me know.
3) Since I'm still looking for a pristine ROM before trying anything else, I have a friend whose tablet (same brand and model) safely updated to 3.2.1, is there a way to make a rom from is gear? If yes, how to?
4) (related to 3) how can I backup my actual ROM, do I have to be a root user to do so?
THX again!

lunaticwraith said:
Thanks for your input, I'll make sure to try all this when I get back from work. I've a few additional questions:
1) If I install a custom rom, will the OTA work from this ROM or, comes the OTA, will I have to restore my actual Stock rom and then proceed with the OTA?
2) I haven't tried the rom on the first link I gave because it is modified and I was searching for the original, pristine, untouched stock ROM for 3.2.1
I've seen such roms around here on xda for 3.2 but none for 3.2.1, if anyone stumbles upon one please let me know.
3) Since I'm still looking for a pristine ROM before trying anything else, I have a friend whose tablet (same brand and model) safely updated to 3.2.1, is there a way to make a rom from is gear? If yes, how to?
4) (related to 3) how can I backup my actual ROM, do I have to be a root user to do so?
THX again!
Click to expand...
Click to collapse
1. Typically, most people do not take OTA's when running a custom rom, as basically the OTA installs a totally fresh factory Rom. This is true with the 3.2.1 update, which contains a new bootloader. Usually, this means you lose root, and Recovery, then stuck with downgrading to get these things back.
Timmy Deans root tool supposedly maintains a back door method, which s supposed to protect root, in case of an OTA. No, I haven't used this method, as I run my own 501 roms.
2. Vache has a thread "full package and updates" in the 500 Dev forum. There are several factory Roms and Updates. You'll have to look. Chances are, he may not have the specific Com Gen version you want, but probably one close enough.
3. If your friend can get adb running, you can pull a "system dump", which will dump all files/folders in the system folder. The boot.img would be nice to get, but you can probably use the current one you have. Unfortunately, he already rebooted, so you probably can't get the original full update file. If he's rooted, you can use an app called Rom Factory, to get most of what you need. It's always a good time to become familiar with ADB.
4. Well, you can back it up internally, but it's sort of useless if you can't get into your OS You will need to Root, and install a custom recovery to keep your backup externally.

Moscow Desire said:
2. Vache has a thread "full package and updates" in the 500 Dev forum. There are several factory Roms and Updates. You'll have to look. Chances are, he may not have the specific Com Gen version you want, but probably one close enough.
Click to expand...
Click to collapse
ok, as Moscow has pointed out, in vaches thread not all roms are listed. My stock roms (1.016.01 and 1.139.04) for instance weren't - so I spent the last hour or two trying the "EUU gen1" listed at the bottom of the page. Well, it actually worked!! It gave me an OTA to 1.139.04 straight away. After that installed i got the 4.010.40 to 3.2 and then the next 2 for 3.2.1 - 7.006.03 and 7.014.15. So its given me the correct updates for my country AND kept my data and settings too.
SO, since you're on a Gen1 Rom this should work for you too, but still no gaurantee you will get the OTA to 3.2.1, no harm in trying though
btw timmydeans method is a gen2 rom so you can rule that out...
---------- Post added at 11:25 PM ---------- Previous post was at 11:16 PM ----------
just came across this link for an update to stock 3.2.1 build 7.014.14 here - orignal thread here but you need cwm to install it....
unless you can make it into an update.zip???
but thats way outta my league,
moscow may be able to suggest something though

Thank you very much, your answers help a lot! Just a few precisions and I'll stop being a pain in the ass!
1. Typically, most people do not take OTA's when running a custom rom, as basically the OTA installs a totally fresh factory Rom. This is true with the 3.2.1 update, which contains a new bootloader. Usually, this means you lose root, and Recovery, then stuck with downgrading to get these things back.
Click to expand...
Click to collapse
==> @ Moscow, when you say "lose recovery" does it mean I lose the green thingy with gears when I start with volume down and power pressed/ and when I reset to factory settings?
==> @dibb_nz your method is the closest to what I'm looking for, I also hope it will give me the correct updates for my country and since Vache is a fellow countryman it might just be ok.
Anyways thanks again, I'll give a thorough look to all of your solutions and try and do a few things tomorrow afternoon. I'll keep you posted in case this thread interests anyone else.

lunaticwraith said:
==> @ Moscow, when you say "lose recovery" does it mean I lose the green thingy with gears when I start with volume down and power pressed/ and when I reset to factory settings?
Click to expand...
Click to collapse
No, what I meant to say, is when you run a rooted "custom" Rom, and use a "custom" recovery such as RA Recovery or CWM, getting an OTA update, usually wipes that out, and installs the factory bootloader. Your factory recovery....cough cough.... will still be there.
If you are only concerned about stock factory, then don't worry about it. You;re ok. Your factory/stock recovery will be just fine
The reason we root and install custom recoveries, is so we can do 3 primary things.
1. Flash a custom rom
2. Create a complete system backup to our external SD card.
3. Get rid of pre-installed useless apps.
There are other things we can do with it, but these are the primary reasons.
When you have a default factory stock system, the only protection you have, is a factory reset (hope it works), and a couple other methods which require a touch more knowledge.
Anyhow, don't worry about your factory recovery. It's just fine.

1) Just for the sake of knowledge what's the difference between GEN_1 and GEN_2? (and GEN3 and CUS7 and EMEA_TMLP)?
2) @Dibb_nz when you tried with the stock rom from Vache, was it because you encountered the same no FOTA update problem as I did? Or just to try...?
3) Something's still unclear to me after browsing through the forums: If I get an unmodified stock ROM can I flash it with the stock recovery? (so without rooting) Or do I need CWM (so root is needed)
4) What's EUU? (on Vache's thread some roms are listed as EUU)

lunaticwraith said:
1) Just for the sake of knowledge what's the difference between GEN_1 and GEN_2? (and GEN3 and CUS7 and EMEA_TMLP)?
2) @Dibb_nz when you tried with the stock rom from Vache, was it because you encountered the same no FOTA update problem as I did? Or just to try...?
3) Something's still unclear to me after browsing through the forums: If I get an unmodified stock ROM can I flash it with the stock recovery? (so without rooting) Or do I need CWM (so root is needed)
4) What's EUU? (on Vache's thread some roms are listed as EUU)
Click to expand...
Click to collapse
1. The Gen's usually signify regional based roms. More specifically language support, sometimes a wifi tweak, and maybe a couple other things. Mostly though, ComGen1's are for the US and probably canada, and offer about 12 different languages. TMPL is for East Europe mostly, with polish as the default language. All roms contain the english language as far as I know.
3. You basically can't install a full rom on an unrooted tablet without CWM or RA Recovery. You will have to run the update (decrypt the file, remove the update.zip)
4. EUU is a pc based install. Plug in the USB, set your tab to APX mode and run the EUU.
If you did the root, and install a custom recovery, then you could run just about all the full roms. Your custom recovery would be overwritten, and you would lose root access. You would have a stock tablet with the version rom you selected.
You can always wait a week or so. Am sure if the update has been pushed to your country, it's just a matter of time till you get it. It's common for the update process for specific roms, to get fully done in 2-3 weeks. It took well over a week just for users in california to mostly start getting updates.

Well the official release date for the ICS FOTA in France is May 3rd, so I'll wait until then but having other options and the know-how to take actions is always a good basis. (plus I'm really not the patient type ^^)
Stupid question but I'm guessing EUU needs root too?
and also APX means rebooting while holding power and volume - right?

lunaticwraith said:
Well the official release date for the ICS FOTA in France is May 3rd, so I'll wait until then but having other options and the know-how to take actions is always a good basis. (plus I'm really not the patient type ^^)
Stupid question but I'm guessing EUU needs root too?
and also APX means rebooting while holding power and volume - right?
Click to expand...
Click to collapse
I tried the EUU just to see if it would keep me on my regions OTA upgrade path.
Sometimes you can have probs OTA'ing if you aren't using the rom from your region.
But in this case it gave me the correct OTA's.
APX is Acer Download mode, where the OTA upgrades are flashed - this EUU will do it via your PC. Button push method (power/reset button) not required.
No, the EUU does not need root which is why I tried it out for you
You will need to be on 3.2.1 before you will receive the ICS update
I used this EUU from vaches thread -
EUUs_SBK_Acer_A500_1.016.05_COM_GEN1
late for work will check back later

That's really helpful thanks I'm downloading the same EUU you used and will try it today or tomorrow depending on how much time I have, will keep you posted!

Ok so I did the EUU install and it worked fine, the tablet then allowed me to upgrade to 3.01 and then 3.1 then 3.2 via FOTA without any problem. But once I reached 3.2, the update tool informs me that there's no update available and my gear is up to date
So my guess is Acer France are not pushing the 3.2.1 FOTA update anymore...
Any other explanation?

lunaticwraith said:
Ok so I did the EUU install and it worked fine, the tablet then allowed me to upgrade to 3.01 and then 3.1 then 3.2 via FOTA without any problem. But once I reached 3.2, the update tool informs me that there's no update available and my gear is up to date
So my guess is Acer France are not pushing the 3.2.1 FOTA update anymore...
Any other explanation?
Click to expand...
Click to collapse
Glad to hear u got thru the EUU process OK, not so great u still can't ota to 3.2.1
Others have reported similar issues not sure if/how they were ever resolved. As moscow posted earlier,ota,s are not made available to all users in all regions, all at once, so it may be just a matter of waiting for the next "push cycle" to roll round.
At least you know you can always get back to stock if you ever decide to root and go custom There no direct root method for 3.2, just use that same euu to get back to 3.1 and use iconia root and Acer recovery installer from the market and you're ready to flash your rom of choice
Pls post back if u do get the ota - best of luck
rgds Donna

Yeah I was just browsing the XDA forums, contemplating the idea to rollback and root and then installing this
I wonder if it's worth waiting for the OTA... as for what you said about waiting for the next "push cycle" I've been waiting since I got the tablet and the update hasn't come yet, which is strange because the ICS update is due on May 3rd in France and I'd guess they'd have everyone up to date and ready for the update by now!
Rooting seems pretty straightforward and much easier than what it was on my Samsung Galaxy Spica: I found this
, a file called iconiaroot.apk on the sdcard aswell, rebooting your tablet while pushing the volume down button so its starts flashing the buggy honeycomb version.
Then start up the tablet again, rush to the market, download some file manager, with that filemanager explore your sdcard, and install the iconiaroot.apk file, once thats done, rush back to the market and download and install acer recovery installer. At that point you will have CWM (clockworkmod) installed.
Click to expand...
Click to collapse
is that all there is to it?
In any case I'll keep you posted just so it can help anyone with the same issue!

alsoe FYI and just for the anecdote: the reason I'm so cautious about everything and scared ****less of rooting is that the tablet is a present from my girlfriend for my 30th birthday, and she'll hang me with my guts if I brick it.

Ok I rooted and flashed the above-mentioned rom and it works! I'm now under 3.2.1!
Thanks to everyone who helped me! When the ICS update comes I will post here to signal how the FOTA went.
Thanks again!

Lol, good onya for taking the plunge! Yeh acer recovery installer is brilliant, along with iconia root, makes the whole process stress free.
Will be interesting to see if you get a notification for ICS OTA with that rom.
Can always flash one of the leaks if u get impatient??
Glad everything's worked out and yr g/f still talking 2 u
rgds Donna

thx! I will post here when/if I get the OTA. and my love life is safe thanksnto iconia root

okay so the ota has been rolling for over a week and a half now and still nothing for me

Going crazy! Want ICS, haven't used tablet in long time.

Hi All,
I'm in a bit of a unique pickle. I have a Lenovo ThinkPad Tablet 1838-CTO, it is a US 32GB wifi-only tablet with all stock hardware (with disconnected keyboard folio).
I am running build number ThinkPadTablet_A310_02_0037_0075_US
It is not liking to play more than 5 minutes of a video before saying video cannot be played, video it played fine before. Tried all the standard steps, recopying, rebooting, etc etc. The device also sporadically reboots 20-30 minutes into use, sometimes. I have root, rootprotector, and I have CWR. I have not used my tablet since about a week after the first update from my current version above: my device went loopy, THEN the update failed, and I stuck it in a closet, $%^@%$*&@ed off at it for not working.
I want to either (depending on difficulty, and recommendations here) update my device to the latest Lenovo ICS *OR* Run a custom JB ROM (perhaps http://forum.xda-developers.com/showthread.php?t=1778375 though it is for ROW not US, unsure if that matters). Priority on maintaining root access, could care less about what recovery is used, etc.
OTA updates are failing since I had to get CWR , and I am not sure how to use CWR to manually patch/update.
As for the glitching and all that, I am fairly certain it has something to do with when I rooted it, I was a very early adopter of the first permaroot (I place no blame except myself for any and all issues, and muchly appreciate the efforts of others in allowing me to root my device, whether it bricks it or makes it 10x better). I just want to update my device to ICS and start using it again. I have done some searching but am finding that almost everyone is using 0089 or later with the same issue I have, trying to get back to stock bootloader. Honestly I would like to get it on Lenovo ICS, maintain root, and go from there.
I appreciate any and all advice, it's a personal device so I am fairly lenient on what I am willing to try.
Update: I would most appreciate a stock Lenovo ICS dump flashable from CWR if someone knows where to get one, again though any help at all is appreciated.
Update 2: CWM 5.5.0.4 unable to mount the SD card (/sdcard - not even sure if it is trying to mount internal or external, I have ALWAYS had nothing but issues with the external ALWAYS being write-protected no matter the position of the physical slider switch, though it always reads fine - Sandisk 32GB micro-SDHC with Sandisk MicroSD to SD adaptor), so flashing anything from CWM is a no-go. I want to take this thing and send it on a flying ride out the window, the only thing stopping me is it would probably survive just fine to spite and mock me. Sorry about being long winded, rather give you guys as much as possible info.

Is rooting the tablet all you've done? Did you remove any stock apps? I had the same problem with my TPT when I tried upgrading to ICS(from build 0089_US on wifi only 16GB)but only because I had a corrupt busybox file or something. Try going back to complete stock(NO recovery no root) and try to do an automatic OTA 2, then OTA 3. It should work.

How do I go back to stock recovery/bootloader? I rooted back when you had to swap in ClockworkMod Recovery, so my updates fail consistently when I have to reboot to apply, my guess is that the updater tries to pass calls to the lenovo bootloader that do not exist with CWR.
If there is a way to restore my bootloader then I should be all set, otherwise I think I need to find a good cooked rom

Get Some ICS
Sublime865 said:
...otherwise I think I need to find a good cooked rom
Click to expand...
Click to collapse
I posted an ICS Nandroid from a US 32GB TPT, exactly what you are looking for, here:
http://forum.xda-developers.com/showpost.php?p=28240019&postcount=14
It will return you to stock Restore, losing CWM, but you can reinstall a proper CWM for ICS afterwards. See the Development Forum for the updated CWM version that works in ICS/OTA3.
You will have root, but you must download and use OTA Rootkeeper to bring Superuser back (don't forget to download and open SuperUser from Play store).
Good luck!

pwstein said:
I posted an ICS Nandroid from a US 32GB TPT, exactly what you are looking for, here:
http://forum.xda-developers.com/showpost.php?p=28240019&postcount=14
It will return you to stock Restore, losing CWM, but you can reinstall a proper CWM for ICS afterwards. See the Development Forum for the updated CWM version that works in ICS/OTA3.
You will have root, but you must download and use OTA Rootkeeper to bring Superuser back (don't forget to download and open SuperUser from Play store).
Good luck!
Click to expand...
Click to collapse
Going to try it tonight/tomorrow. Updating my Vivid to a non-corrupt CWR then flashing HolICS 1.3 from 0.9b tonight. Oh the adventures I get myself into... XD
Thanks for the upload, I'll let you know if(when) it works, either way I appreciate the effort!

[Q] Can't update after deleting stock apps

I've been trying to update from 4.1.2 to 4.2.2, but I deleted some stock apps and now the update is failing. I've tried flashing it manually and OTA, and various other things, but nothing has helped so far. Has anyone else had this problem?

The OTAs are for use with [size=+2]unmodified[/size] factory ROMs.

bftb0 said:
The OTAs are for use with [size=+2]unmodified[/size] factory ROMs.
Click to expand...
Click to collapse
I figured that out when I tried to update. I can't flash it either, so your post doesn't really help.

wipeout4wh said:
I figured that out when I tried to update. I can't flash it either, so your post doesn't really help.
Click to expand...
Click to collapse
My post tells you that you have the wrong expectation about what OTAs are capable of... and that you are probably the 200'th dude to come in here and say
"Wahhh! The OTA doesn't work on my heavily modified stock ROM!".
If you want it to work without exerting any mental effort, return the /system, boot, and recovery partitions back to 100% pure stock corresponding to whatever release your original ROM was based upon, and run the update. Then re-flash your recovery and re-perform all your /system mods, starting with a flash of the same root kit you started with.
Note that the the update you are contemplating also includes a bootloader update - performed the safest way possible (signature checking performed by the existing boot loader). Doing it the manual way (via fastboot) is quite dangerous, even for experts. If you have a 3g version there is also a radio update which also should not be attempted in any other way than via a pure stock OTA install including use of a stock recovery.
Make a full Nandroid backup before you begin anything - and get a copy of that backup off of the tablet as well as a failsafe measure. If you screw things up moving forward, at least you will be able to start over from where you are right now.
If you have been operating using best practices, you should already have a nandroid backup of the pure-stock /system & boot images. TWRP allows you selectively restore individual partitions. Few users seem to know how to actually make a backup of stock recovery partitions, but you can get that out of oldblue910's archive site - find the link in the OTA thread.
good luck

wipeout4wh said:
I figured that out when I tried to update. I can't flash it either, so your post doesn't really help.
Click to expand...
Click to collapse
He's telling you the plain and simple truth. Want the OTA- as it stands, you're out of luck. Either return to stock and then flash the OTA, or flash the 4.2.2 factory image. That's it. Nothing more. That anyone even bothered to answer this uselessly redundant thread is a miracle in and of itself.
Sent from my Nexus 7 using Tapatalk HD