Database Users

[Q] Problems occurring in batches?

After reading all of the crappy review for the transformer, it looks as if 50% are happy 50% are not.
I am wondering if the problems are occurring in batches because I just ordered mine from American TV and it will probably be here tomorrow or the next day.
A lot of the problems I have found are from the batches that have already been purchased and I don't know what to think.
Two things:
When asus was first bringing these to market, it could the problems are coming from they just naturally skimped on manufacturing quality because they are so damn cheap. Or they had a bad batch to get them to market quickly.
Asus could also just had normal manufacturing quality before and NOW since there is a high demand, newer units may experience worse manufacturing quality. Or they could be better because they knew of the problems.
Hope its not too confusing, what do you guys think? Newer units = worse quality? Older Units = better than newer?

i think logically you could expect the first units to have the most problems, however, we dont know if asus had enough complaints, or realized that there are defects (if there are--aside from software side) to be able to retool and make changes during the assem process to produce better revised hardware.
I actually gave this exact topic a lot of thought a few days ago, i thought about everyones complaints and how it was hit/miss it seemed, and i wondered whether the people that are complaining were truly the "first" adopters and got REV 1 hardware. Obviously, since they are playing with the tab and most of us are anxiously awaiting its arrival i would assume it just may be the case. Heres to hoping that these little glitches were an easy fix at the factory level (but knowing how they operate i doubt its a simple/cheap/quick process, which makes me doubt that the tabs that me and you will receive this week will be any diff from the ones recieved by the people last week and the one prior. the time frame is just too small, but then again, anythings possible).

slowhatch said:
i think logically you could expect the first units to have the most problems, however, we dont know if asus had enough complaints, or realized that there are defects (if there are--aside from software side) to be able to retool and make changes during the assem process to produce better revised hardware.
I actually gave this exact topic a lot of thought a few days ago, i thought about everyones complaints and how it was hit/miss it seemed, and i wondered whether the people that are complaining were truly the "first" adopters and got REV 1 hardware. Obviously, since they are playing with the tab and most of us are anxiously awaiting its arrival i would assume it just may be the case. Heres to hoping that these little glitches were an easy fix at the factory level (but knowing how they operate i doubt its a simple/cheap/quick process, which makes me doubt that the tabs that me and you will receive this week will be any diff from the ones recieved by the people last week and the one prior. the time frame is just too small, but then again, anythings possible).
Click to expand...
Click to collapse
Definitely have to agree. My guess they are the same and it is so difficult for Asus to actually respond to problems and transfer a fix to the manufacturing of the units. The only real thing I am worried about is the light bleed/dead pixels.
Moreover, the problem seems to be 50-50 and my estimate came from the assumption that there is manufacturing quality loss through increase production speed to meet the high demand. I tend to believe this because of the poor quality control. I am assuming (after reading the post about the guy receiving a 2.2 model) is that they do perform screen quality checks, to a certain extent. Some may have just slipped out.
Lets just hope we get a solid model.

I tend to side with the second poster...it's all about quality control....how many get out the door without their defects being noticed OR....being flagged as a defect.
I've worked around assembly lines all of my life...25+ years and I can understand some defects got through unnoticed....but the question is: when were they noticed and what steps were taken to prevent the same issue from occurring again?
And the second point is valid also....speed equals a mindset of "this one little corner-cutting decision won't make that big a deal in the long run...."
Unfortunately, rushing things to market to fill orders at a breakneck pace means that issues are more likely to get by...that's a fact of life.
When cash is on the line...decisions get made that might not otherwise gotten made.
I hope mine comes today without the glaring errors that I've seen here...crossing my fingers...

My only real complaint is the light bleed. I know it isn't the only device that's had this problem. I remember when I was reading the Evo 4G forums it had a similar problem when it first came out and recently the iPad2 had light bleed issues too.
The light bleed isn't a huge deal, but it is distracting while watching certain tv shows and movies imo.

I've had 3, first one was the very first batch in the UK, arrived mid April or thereabouts. The next one was around the end of April and the the latest one I received around the 6th of May.
1) Mid April
Some lightbleed on 3 of 4 edges. Perfect screen in terms of pixels. Imbalanced speakers. No sleep of death in 2 weeks or so. No gap in glass.
2) End April
Terrible lightbleed. 14+ stuck pixels (I gave up counting). I think the speakers were imbalanced too. No sleep of death, but only used it for a few minutes. No gap in glass was noticed.
3) Start of May
Some lightbleed, probably akin to 1. Around 8 or so stuck pixels, seen on black screen. Perfectly balanced speakers. Had 1 incident of the sleep of death within 5 days. Glass does not fit perfectly on left hand side (gap of 1-2mm allowing dust inside and glass to be lifted by nail)
Had I known what would happen I would now gladly stick with the first! So, from this small sample it seems that in my case the earlier devices were better in some ways but not in others. We'd have to have a huge sample to be able to answer definitively. I still love the tablet though.

I have a first US batch version and it's fine.

This is why I just ordered the Acer. I got mine and had some light bleed. It got worse. The creaking got worse. Now there is a small piece of dust under the screen. It is not very noticeable except on white background but it worries me that in 6 days of ownership it is getting worse. I now see a dust spec under the camera glass.
The edges of all the ports are razor sharp and can take off skin.
I love the weight the price and the ups screen but the build quality is very disappointing. If it was only the light bleed from day one I would keep but I can't handle how much more has happened in 1 week of ownership.
I got a 32 DB Livonia using coupons from staples for only 40 dollars more than a 16gb Asus cost me. The screen in store was quite good. The build quality seemed much better and despite the added weight it seemed more comfortable. To hold given the curved shape. If availability were better maybe I would exchange my Asus but no stock around.
in the end I might just opt for the new galaxy tab as it seems to be most like the load in size and weight.
Sent from my Transformer TF101 using Tapatalk

Just received
I just got the TF in the mail today. It is nice.. but there are some drawbacks from the xoom that I miss.
Xoom felt nicer in my hand and had that led notification. But the screen on the TF is WAAY better.
I do have light bleed in small sections, not terribly noticeable. Speakers are fine. no dead pixels, yet. not really a creaky sound, just when I press harder than normal on the screen. No glass misaligned. I will seal up the beast with a vinyl cover. Screen is responsive, no probs yet.

A bit disappointed
I received my TF this Thursday and was so very happy. After unwrapping it I pressed the power button and I got nothing. I thought OMG it's not working. Then I thought, maybe they didn't have time to charge the battery. So I charged it. I checked on in within a hour and pressed the button and it came on. I began to play with it and realized that after the TF wasn't in use for more than 5 mins the power button whenever pressed didn't wake the TF up... SO i pressed and pressed.. nothing.. so I waited about 30 sec after a press of the button and it came on.. After going thur this over and over I figured it was a defect and I RMA'ed it. I'm hoping that they didn't just push out a product that will have a lot of issues...

Here's my two cents:
Got my TF from Fry's in LA on May 5th. 32GB don't know manf date.
For light bleed - minimal sround the left lower edge and upper right edge. Dark room, bright up full, about a 1mm bleed - very slight and almost unnoticible.
Running latest update with no issues, just updated again today with no issues.
Sometimes after a long sleep it won't power back up with the power button, so I press the vol down and pwr at the same time (shut down) and it shuts down and restarts fine...Seems a sw glitch.
Other than that it's an awesome machine!
Dock - arrived on the 12th. charged up fine, docked fine, no mouse, brick or other issues other than the backspace key is touchy (actually not touchy -takes some effort), but all other keys work well. I think I'll RMA it later depending on how many show in production (I can live with this for now).
Case - had to cut a small hole in bottom to allow charging while case is closed. Otherwise great.
I hope this helps.
BTW, I don't follow these threads too much, so if you need something please PM me.

I feel like I've said this before, but I'm honestly surprised to hear of all of these issues. Mine doesn't seem to have any of them. No gaps around the screen, the glass fits perfectly, the casing for the tablet seems sturdy and doesn't budge at all. There's very little noticeable light bleed, if any. I've never had anything like a "Sleep of Death". I couldn't be happier with the quality of this beast.
EDIT: I should mention I have a 32GB version that I purchased from TigerDirect on Wednesday, got it this past Thursday.

My tablet and dock were among the older units. I had only one instance of SOD and the green screen with the camera issue which has been fixed via firmware update.
The tablet itself appears to be of high build quality,the bezel is secure, no gaps around the screen seal, no dust,no dead pixels,very minimal light bleed that I had to actively look for.

no problems to speak of
eGoing on 2 weeks ownership using various each day.
The only thing a few times I've come back to an unresponsive unit. Then I just held power button down 10 seconds and then rebooted. I take that with a grain of salt.
But. I am not going to update software for another week or so. Until I read more positive reviews

Many problems with mine
I ordered mine from The Best Buy batch on May 22nd, and it came with a not-smooth not-particularly-responsive screen; it then got two light leak spots, the clock disappeared from the menu bar once, and it bricked when I ran the 3.1 update. I sent it back, but I wonder, are the screens really not as smooth or responsive as the Xoom or Acer A500?

Returned the Eee Pad.

Had it for 1 whole day. THe quanlity feels cheap. New honey comb ui is good and very impressive. When I restart the tranformer at night, I saw at least 8 birght spots on my screen. So decied to return it to amazon. But I don't have the speaker problem.

Mine does not feel cheap. Feels well put together. Some people think it feels cheap because it has a plastic back. That to me doesn't mean it is cheap. I don't need metal to feel something is quality.
If you had problems with it creaking and seems like you had problems with the screen, I assure you that is not how it is supposed to be. RMA.

Quanlity ........ Lol.........something wrong with the keyboard too?
Sent from my Desire HD using XDA App

Mine creaks a bit and may give the impression of not being solidly built, but in my opinion, it's a really nice tablet.

Tired of these threads. If u don't like, just go away. It's a $399 tablet and build quality is excellent for a $399 tablet. Maybe some company will release a tablet for twice the price one day made out of carbon fiber, but who the hell cares if it does the exact same thing as a $399 tablet. Lets get over this once and for all. Next, everyone will be saying that its not good enough because it doesn't have tegra 3 chipset or it doesn't run Windows 8 or it doesn't make pancakes. The TF is a great tablet that many of us love and anyone who doesn't probably should just get an iPad 2 or wait for the iPad 3 or just avoid tablets altogether...
Sent from my Transformer TF101 using Tapatalk

Indeed a little bit overdone to start a thread for this, but I must agree, the TF has some common issues, which keep me from saying that it's a real quality product. (Speaker problem, accelerometer not calibrated, backlight bleeding, dust under screen, dead touchzones, ...)

gadgetfann said:
Tired of these threads. If u don't like, just go away. It's a $399 tablet and build quality is excellent for a $399 tablet. Maybe some company will release a tablet for twice the price one day made out of carbon fiber, but who the hell cares if it does the exact same thing as a $399 tablet. Lets get over this once and for all. Next, everyone will be saying that its not good enough because it doesn't have tegra 3 chipset or it doesn't run Windows 8 or it doesn't make pancakes. The TF is a great tablet that many of us love and anyone who doesn't probably should just get an iPad 2 or wait for the iPad 3 or just avoid tablets altogether...
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Don't be tired of these threads, everyone has the right to say what he thinks.
I had the Transformer for a day and had to send it back.
The quality of my Transformer was disappointing. The Upper rigth corner of the touch screen was not in line with the other corners, it was lower by 3 mm that the metal frame.The back was 3mm above the metal frame.
Not to speak that i could see through the hole between the touch screen and the metal frame.
So i think that those who got a good Transformer should be happy.But not all of them are great, in fact i think that the quality control was nonexistent.
NOT EVERYONE GOT A PERFECT TRANSFORMER!!!!!
If you did get o good one it does not mean the problems you hear about and you are tired off are not there.
I sent mine back and now i am waiting to get a replacement.

i have slight creaking only in the very edge of the top right an bottom left corner but its only a little other wise the build is good not cheap

I never understand why people want to start a whole new thread just to tell the entire world they're returning something.....

magicpork said:
I never understand why people want to start a whole new thread just to tell the entire world they're returning something.....
Click to expand...
Click to collapse
Because they are butthurt and want to nag to other people to make themselves feel better.
By the way, if the OP wants good build quality you should pick up an iPad 2, they are half metal and feel sturdy. Just don't sell one of your kidneys like that kid.

yeah agree...why need to create another new thread ?? just find a related thread and post in it. next time another thread like this appear, can consider it as spam/troll

Oddly the demo units at staples feel like they were built like a tank. No creak or flex. Very solid despite plastic back.
I am on my fourth and waiting for my 5th TF.
EACH has suffered light bleed with the most recent one being the best so far.
However while it was solid on day one it now is creaking along the top left and right corners and a bit on the right side. If unit number five is no better they all go back and I get a Samsung. The dock for me is not so important as a laptop owner that I will accept such poor build quality.
my ipad 1 bought a year ago has no bleed no creaks after a year of use. The demo units in 3 stores of the transformer were all solid so I know Asus can build them well but likely make different units better made to be used as demos.
I suspect this as o e staples store who had just got product in and had not had their demo put out yet would not let me buy their demo unit.
ericc191 said:
Mine creaks a bit and may give the impression of not being solidly built, but in my opinion, it's a really nice tablet.
Click to expand...
Click to collapse
Sent from my Transformer TF101 using Tapatalk

Shawn_230 said:
Because they are butthurt and want to nag to other people to make themselves feel better.
By the way, if the OP wants good build quality you should pick up an iPad 2, they are half metal and feel sturdy. Just don't sell one of your kidneys like that kid.
Click to expand...
Click to collapse
They have been suffering from the light bleed issues too...

Lol, you want to know how badly my 7'' Galaxy Tab creaks? That's cheap plastic. Creak creak creak. It creaks if you look at it sideways.
Also, check out this thread: http://forums.macrumors.com/showthread.php?t=1122027 In fact, google up "ipad light bleed." Prepare to be astounded: http://www.engadget.com/2011/03/12/poll-is-your-ipad-2-backlight-bleeding-video/
Look, if you don't have anything nice to say about the iPad2, don't say anything at all! Ignorance is bliss!! J/k. I think you may be right, a friend of mines co. Bought 10 iPad2 and ALL of them have it to some degree... They also have as many 1st generation iPads and the difference is dramatic.
Click to expand...
Click to collapse
Fun, hey?
(I've only noticed light bleed when I turn it on and the screen displays boot animation, FYI. Any other time and it's not particularly noticeable.)

i was able to play with the Samsung 10.1 tab at the android central meetup in nyc and the Samsung tab had all the same UI issues as the TF. Yes it was thinner but to me the TF is fine the way it is and iits $100 less. My TF is fantastic and with the $$$ I saved I got a nexus s 4g. Put that in your pipe and smoke it.

grainysand said:
Lol, you want to know how badly my 7'' Galaxy Tab creaks? That's cheap plastic. Creak creak creak. It creaks if you look at it sideways.
Click to expand...
Click to collapse
My gf's Galaxy Tab is solid as any tab I've ever handled, so therefore I think all Galaxy Tabs are perfect and you have the only bad one.
Sarcasm (not directed at you personally), hopefully it was duly noted The TF has some bad batches, I think that's obvious. You can say, "Oh it's just a small number on XDA!" but you can probably use this small sample and apply it to the entire user base and come up with an idea of the amount of defective units. Sounds like the early batches were rushed out the door to meet a deadline and demand.
Mine is pretty solid. Creaky, one spot of light bleed, but tolerable for the cheapest HC tablet, and I love it like I'd love my first born, if I had a first born. Still the best deal out there.

wackadroid said:
i was able to play with the Samsung 10.1 tab at the android central meetup in nyc and the Samsung tab had all the same UI issues as the TF. Yes it was thinner but to me the TF is fine the way it is and iits $100 less. My TF is fantastic and with the $$$ I saved I got a nexus s 4g. Put that in your pipe and smoke it.
Click to expand...
Click to collapse
Yeah, Galaxy Tab 10.1 is supposed to be really thin but I still don't want it.
Compared to the Transformer it's more expensive, no expandable memory, no IPS display, and build is plastic just like our Eee Pads.
Honestly the Transformer has a few bugs, Honeycomb too... but overall you cannot beat this thing, no contest when you consider cost.
TF101FTW!

I was pretty happy with the overall design of the tablet but their quality control does leave a bit to be desired. I've had 2 tablets and both have a defect. One was light bleed and the most recent one came with a broken power button.
I'm not sure if I should keep trying replacements or call it quits on Asus.

Tutti-frutti said:
Indeed a little bit overdone to start a thread for this, but I must agree, the TF has some common issues, which keep me from saying that it's a real quality product. (Speaker problem, accelerometer not calibrated, backlight bleeding, dust under screen, dead touchzones, ...)
Click to expand...
Click to collapse
i agree. it's not high quality, but good enough quality for the price - compared to the current market price for higher end android tablets.

I thought there was a lot of people with the screen bleeding issue? The way you guys make it sound that the screen be perfect. Unfortunately I noticed I got some serious bleeding myself. I just cant figure out if it's worth RMA and all that. It might take forever for KMART to get anymore back in stock.
I thought I read a lot of people had the issue also. It doesnt bother me at all really, but one of these posts made me feel that I should exchange it ASAP

Happy TF owner

I am on my second TF.
The first one wasn’t sealed between the screen and edge all the way down on the right side. It also had terrible light bleed. Five on the bottom, two on the left and one on the right side. Speaker balance was ways off.
I returned it and the shop asked me if I wanted a new one or my money back. Now – reading in here isn’t all that positive. Some people are on TF number 3+.
I decided to get a new one and YES - hardware is near perfect. HC is …. well HC
I have on small spot of light bleed, but you have to turn light all the way up and go into a dark room.
I didn’t check the batch number on the first one, but it came with HC3.0. The new one is B6 and came with HC3.1.
Battery drain is 0.6% / hour. That is without live wallpaper, no widget on homescreen and wifi profile that turns off when screen off. That is pretty good I think.
One thing that needs to get fixed is Flash. Every time Steve Jobs need to show a bad example, he says; “Go look at the ASUS Transformer. It drains battery, FPS is 6-9 and everything higher then 720p is impossible. Ohh and the keyboard lags like crazy”. Please ASUS fix the hardware acceleration!
My father also wants the TF, but I have advised him to wait. I am not that much of a gambler and getting the perfect TF can be a gamble. . My advice to all is to try getting one from batch B6.
Now I’m wait for my dock and hoping for the best

Glad you have a TF that you are happy with now
Mark.

Looking at the Transformer

I bought the Acer Iconia yesterday morning, and I was really not very pleased with it. The weight is a big issue for me, but the biggest problem I had was the screen. It was responsive enough and fairly bright, but the color reproduction and black levels are awful... After spending several hours messing with it, I decided to take it back today and pick up a transformer.
However, this forum has to be the biggest wet blanket in the world. I now have no idea what I want to do. Yes the screen quality of Iconia is bad, and it does experience the SoD like every other Honeycomb tab, but the list of issues that are mounting here are pretty considerable. The IPS display, and the supportive dev community had me pumped and ready to go, but now I'm thinking that it might be a sideways move. Dead pixels, black stripes on the screen, SoD, creaking bezel, reboots, lock ups... Jeez...
I guess the Thrive is the next on the list, but damn... That thing is the size of a standard hardback novel. And it's expensive to boot.

Divinedark said:
I bought the Acer Iconia yesterday morning, and I was really not very pleased with it. The weight is a big issue for me, but the biggest problem I had was the screen. It was responsive enough and fairly bright, but the color reproduction and black levels are awful... After spending several hours messing with it, I decided to take it back today and pick up a transformer.
However, this forum has to be the biggest wet blanket in the world. I now have no idea what I want to do. Yes the screen quality of Iconia is bad, and it does experience the SoD like every other Honeycomb tab, but the list of issues that are mounting here are pretty considerable. The IPS display, and the supportive dev community had me pumped and ready to go, but now I'm thinking that it might be a sideways move. Dead pixels, black stripes on the screen, SoD, creaking bezel, reboots, lock ups... Jeez...
I guess the Thrive is the next on the list, but damn... That thing is the size of a standard hardback novel. And it's expensive to boot.
Click to expand...
Click to collapse
I think the newer batch (serial number B60xxxx) has a better build ... SoD and slightly creaking bezel (it may be ignorable when you put it in a case) may still be there, but the other issues should be pretty much gone. Except if you got a lemon ...

Hmmm... I wonder if Best Buy will let me thumb through their stock to look for a B60??? They also don't sell a case, so I have to go out looking for one... Ugh...

Okay, you guys must have the worst luck in the world. My Transformer doesn't have any of these issues and I have a B50. Does it have problems right away or is mine going to develop these issues over time?

ShensMobile said:
Okay, you guys must have the worst luck in the world. My Transformer doesn't have any of these issues and I have a B50. Does it have problems right away or is mine going to develop these issues over time?
Click to expand...
Click to collapse
Same. I have a B50 and my first one was completely fine.
And I don't think the issues are going to build over time.

Actually, it looks like the Thrive is having some pretty well-documented SOD issues itself. I've had decent luck with my TF. Minimal light bleed, and a slight looseness to the bezel on the right (right above SD card). Imperfections aside, I love it. I'll definitely hold me until Android tablets round 2 (ICS).

Well, the dude at Best Buy did actually let me thumb through the stock. I got one of the 3 B60 revisions that they had. I also picked up the stand/sleeve from Toys R Us on the way home. Here's to hoping this isn't a lemon.
I love the screen so much more than the Iconia... I played with the display model (also B60) while I was waiting on "customer service". Colors look sooooo much better.

I got a B6 at best buy they had them in the display locked up and i told him i needed one with a B6 serial number he got me one. the only thing i see wrong with this hardware wise. light bleed. im a happy camper. but i did buy the extended warranty.

Divinedark said:
Well, the dude at Best Buy did actually let me thumb through the stock. I got one of the 3 B60 revisions that they had. I also picked up the stand/sleeve from Toys R Us on the way home. Here's to hoping this isn't a lemon.
I love the screen so much more than the Iconia... I played with the display model (also B60) while I was waiting on "customer service". Colors look sooooo much better.
Click to expand...
Click to collapse
Welcome back.

Well, I got her home, charged, rooted, and running on Revolver 0.2.1. OC'd to 1.2Ghz.The tablet is everything that I wanted, so far. I am still pretty excited to see where the dev community goes. I really hope to see some new kernels and creative roms show their faces. I'd also like to see Virtuous's Galaxy/Xoom/Thrive roms on our little tab.
As far as issues. I have 3 places on the screen with minor spotlighting, but to be quite honest, I have worse on my iPad 1.
The battery life is stellar so far. Much better than I had with the Iconia. To top that off, the case Asus offers is EXACTLY what I was wanting. It's almost identical to the Apple iPad stand case.
The strangest thing I've noticed between the two tabs is the flash performance. The Transformer just blows the Iconia out of the water. Justin.TV is a completely pleasant experience all the up to the 720p+ mark and beyond. The Iconia had noticeable lag when playing anything on the channel.
The Iconia's speakers were definitely of a higher quality, but after correcting the speaker balance issue, and using Supercurio's mod, the sound is every bit as good, if not better than my iPad 1.
In the end, I'm pretty damn happy with it. My wife is a complete Apple fan, and she walked by while I was working on the Transformer, and she stopped and said "What is that?!?" I told her it was Android Honeycomb, and she snatched it out of my hands. That's fine... She can play, but in the end, she's getting the iPad...

Build Quality: NAH!

This is my 5th Android tablet. The first Transformer had gone directly back to Best Buy due to terrible light bleed. Transformer Prime sold in a month. It had its obvious problems plus a screen problem: when you press a little harder on the right side of the screen it would flicker into white. Probably a faulty one. This is my 3d transformer and it is not that impressive. Surprisingly there is no light bleed at all, but the Prime was much better in every way. I sense and hear a squeaky sound when I press the right side of the back camera just under the power button as though it was not fitted well. I pressed all the sides and corners of the tablet, only this spot gives that sound. There is an emptiness there. It really is annoying. I still think I will keep it but wait for the new Samsung. MY GTAB 7 and 10.1 were also made with plastic but they were sturdier and far better in build quality. Asus keeps disappointing me.

Cool story bro.

Perhaps your expectations doesn't match the design specs and price tag of this machine? To me it seems they opted for better guts then exterior and screen.

Thats very true. ASUS wanted to give a nice device to those who couldn't meet the price tag. Everything comes at a cost, this tablet is plastic :T
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2

Firstly, I am not quite sure why anyone would want to press the back right side of the tablet next to the back camera? If it squeaks, don't press it, no function on this tablet requires that part pressed, nor is it near anywhere near where one would hold it.
This is my 3rd tablet as well.
First, I had a Prime. I disagree the Prime was better in every way. No GPS, poor wifi signal, micro sd card slot poorly placed so the card kept popping out, micro hdmi port was loose - cable kept coming unplugged. Is the prime sexier, sure, but the aforementioned problems made it quite non-functional.
Second I had an Acer A510. Great tablet, just a bit bulky and had a terrible heat problem where the back of the tablet would reach over 100 degrees when 3D gaming...could not hold it anymore it was so hot. Also, due to low sales volumes, the tablet does not have much developer support, still don't have their own forum with similar launch date to this tablet.
I have had none of these problems on my TF300, it works amazingly well. I actually don't mind the plastic, it is comfortable to hold, and looks much better than I thought it would. The sound is great for a tablet, I had the a510 and believe this is comparable, even without the speaker separation. Is this tablet perfect, no: Battery life could be better and they could have used Gorilla glass, but those are minor nuisances compared to what I have dealt with on my other 2 two tablets and I don't think any tablet is perfect. I am not a budget buyer and purchased this tablet originally to check it out, but it is so good compared to anything else I have used, I plan to keep it and enjoy it.

I did press to get it out from its keyboard dock. Thats how I realized it was not fitted well. Do we really have to accept something with its flaws because it is cheaper? ASUS is a brand name I respect. I had more than 6 laptops, netbooks and now an ultrabook which I LOVE!!!! But we have to accept that Asus is less attentive when it comes to Android. We will see how they will try hard this fall or next year with their Windows 8 tablets and stuff.

I honestly think the build quality is great with the 399 price tag. I have no issues with light bleeding, creaking or loose parts. So far my experience is great and have no complaints.

Love my tab after unlocking and installing cm9. How much more could you ask for with a guad core processor and 399.99 price tag for a 32 gb! all the tablets I see are dual core for 399.99 for 16gb.
Asus, in my opinion gave us a budget tablet and then some. The realm of this tablet was to cut cost so everyone could afford Tegra 3 without buying a 700$ unit. I love my tablet
Sent from my VS910 4G using xda premium

Great, cheap, tablet.

Always fun to see how people can differ.
Some like the building quality and others think everything is cr*p. I think this is purely what you expect of it and what you want to spend. If you buy an IPad it is not comparable to a Asus because as the manufacturer is different the buildingprocess is different.
I think you (the topicstarter) just want to get a almost undestructible tablet. But tablets are just fragile and if you have a technical problem with one you just bring it back to the shop because you have warrenty.

At this point in time there is no better tablet to buy, yes i had the cash to get a prime, but i need good wifi coverage, which the prime has not, so i bought this one. I don't want older technology , and surely not at the same price (all other tabs are dual core at maximum)

I just didnt feel the thrill I felt when I held my Samsung 10.1 for the first time or even the TR Prime. TR Prime just for a couple of days.... But I agree with most views here. It is a very good tablet for its price. I like the battery usage. I havent charged it for more than 2 days now. Unnoticeable light bleed, etc... Just that squeaky sound
BTW. No Riptide onboard was a bum!

I think mine is fine, besides some uncomfortable cracking I tend to hear with the keyboard dock. Then again, I was not very impressed by my Asus laptop in terms of build quality either. I feel weird buying another Asus product after that laptop but there is nothing else that compares as far as I am concerned when it comes to tablets. I deal with it.

Well I was greeted with a busted pixel upon opening package still gave a try then started to have small bleed then by third week serious bleed, then when I hold on certain spots in landscape and portrait at different angles I get this blur like bleed as if im pressing to hard felt like if I held any looser I would drop it, also can barely see in the sun light other than that it works like heaven which really bugs me because I want it but dont believe it will last so im sending back and waiting for the reviews for the 700 when it releases after atleast a month has passed till then I will be pad less...........

bigwalt12 said:
Well I was greeted with a busted pixel upon opening package still gave a try then started to have small bleed then by third week serious bleed, then when I hold on certain spots in landscape and portrait at different angles I get this blur like bleed as if im pressing to hard felt like if I held any looser I would drop it, also can barely see in the sun light other than that it works like heaven which really bugs me because I want it but dont believe it will last so im sending back and waiting for the reviews for the 700 when it releases after atleast a month has passed till then I will be pad less...........
Click to expand...
Click to collapse
I have none of those problems. You must have a defective unit, try exchanging for another one before final judgment.
Sent from my HTC Vision using XDA

I honestly love this pad but I see im not the only one experiencing this only bought this because the wifi issue with prime if the 700 solves this without a dongle with a better and brighter screen then I will get that one instead. I have a good relationship with amazon hate returning things multiple times I dont want to take another risk but you guys got a great pad for the price that is if you got a good one. Im gonna miss this pad but im hoping the 700 is worth the wait?????

Psyloid said:
At this point in time there is no better tablet to buy, yes i had the cash to get a prime, but i need good wifi coverage, which the prime has not, so i bought this one. I don't want older technology , and surely not at the same price (all other tabs are dual core at maximum)
Click to expand...
Click to collapse
You nailed it! The only other tablets to compare to this one is the prime (poor GPS and wifi at $500) and the Acer a510 (no keyboard dock, overheat issues stalled sales at $450) and the Toshiba excite( screen issues, OS issues for I think $500- $550).
NO BRAINER to me.

Even if I dont thing 400 is cheap, it is a very good Pad. I dont have any dead pixels and not one other Problem. Wifi is is even better than my last tablet (Hannspad ). Would recommend it at any time.

The 300 is pretty much built the same way as the 101 plastic back..