Ok i have t-mobile UK with the correct Radio and i installed HSPL4 and it said that we have hacked it, so i assume thats working, when i run romupdate from magldr it is trying to change it from 3 something down to 2 something. i get the grey box saying updating it never gets passed 0%. SPL is 3.03.000 which i selected the correct bit when installing HSPL4
Hyuukai said:
Ok i have t-mobile UK with the correct Radio and i installed HSPL4 and it said that we have hacked it, so i assume thats working, when i run romupdate from magldr it is trying to change it from 3 something down to 2 something. i get the grey box saying updating it never gets passed 0%. SPL is 3.03.000 which i selected the correct bit when installing HSPL4
Click to expand...
Click to collapse
Android requires 2.08 HSPL on the HD2...so in HSPL4 choose the 2.08 HSPL
I have no sim card in the phone right now, but that surely shouldnt be an issue? when i start up the phone it says i am running
r 2.15.50.14
g 15.42.50.11u
d 3.14.04666
So are u saying i was not meant to install hspl4?
Someone please confirm but do i now have to get rid of HSPL4 downgrade my rom thus downgrading the spl then install appriopriate HSPL for that rom? if so what rom should i downgrade to?
Hyuukai said:
So are u saying i was not meant to install hspl4?
Click to expand...
Click to collapse
It depends on what SPL/HSPL was on your HD2. If it was already HSPL 2.08, then it was OK for Magldr/Android.
Check the red lines in this thread:
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
So you have to run HSPL4 again, choose HSPL2.08, and then you can flash magldr...
I havnt changed that it came with 3.03.000
my spl is 3.03.000 so surely i cant choose that hspl?
Ok i am abit confused, but i have already installed hspl4, can i install it again and choose a different spl?
what i am asking is i have put hspl4 and choosen 3.03.000 can i now do the same process again and choose 2.8 or do i need to delete the hspl4 first?
Hyuukai said:
my spl is 3.03.000 so surely i cant choose that hspl?
Click to expand...
Click to collapse
i think you can choose HSPL2.08, but i never tried from SPL 3.03 to HSPL 2.08 directly...give it a try
can i run hspl again or do i have to delete it then instal it again?
Hyuukai said:
can i run hspl again or do i have to delete it then instal it again?
Click to expand...
Click to collapse
That's a good question. Check this/ask this in the HSPL thread
http://forum.xda-developers.com/showthread.php?p=5279236#post5279236
Ok i ran it again and it worked, now when trying to install MAGLDR i get error 260.
Sorted it. So even if you have HSPL installed and a higher SPL you can run HSPL again without installing as long as its the same version and change it to a lower HSPL like 2.8
Related
i have spl 3.03 when i tried to install magldr 1.12/1.13 progress shows 0% after long time its give usb error (communication error) whats the solution///
Hello,
Check these threads:
http://forum.xda-developers.com/showthread.php?t=611433
http://forum.xda-developers.com/showthread.php?t=893618
Most important: you need HSPL 2.08 to instal Magldr.
you need hardspl 3 that supports spl 3.03 / 2.10, and can install hardspl 2.08.
http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2
roloracer said:
you need hardspl 3 that supports spl 3.03 / 2.10, and can install hardspl 2.08.
http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2
Click to expand...
Click to collapse
and by hardspl 3 he means HSPL4, of course, from
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
this post.
wifi problem
thanks to all
yes i installed desire_dl 3.4 nand on my htc hd2(leo) but i have one broblem i tried to connect wifi (wep) but it cant connect after few second saying obtaining ip .
why it cant obtaining ip ..... any solution
samsamuel said:
and by hardspl 3 he means HSPL4, of course, from
http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
this post.
Click to expand...
Click to collapse
yeah thanks for that , I didn't know they had a HSPL4!
ashokgm said:
i have spl 3.03 when i tried to install magldr 1.12/1.13 progress shows 0% after long time its give usb error (communication error) whats the solution///
Click to expand...
Click to collapse
it seems you have to downgrade the spl to 2.08 before install magldr.
DFT annonce 3.03 only for WM or SD version.
hello!
i wanted to ask you guys plz if you can help me with how do i put android on
my HD2. i read a lot of stuff and tryied everything that is written in web sites but nothing helps.
my HD2 is writing spl 3.03.0000 on the colored screen and my rom is 1.66.405.2
the radio is 2.15.50.14. i tried using rom 3.14 but it didn't work so i read that i should downgrade my spl(i don't know how to do this) to 2.08 or lower so i could put HSPL3 but i coldn't do it.
if somebody knows which android system will work on HD2 spl 3.03 and how to do this plz write it down.
thanks...
I have the same problem please HELP!
Get HSPL4. Run it. Flash HSPL2.08.
That should work just fine.
are you sure in what you are saying??
are you sure in what you are saying that HSPL4 will work on spl 3.03 because in threads here it is written in big red bold that HSPL4 doesn't work with ANDROID/WP7 and SPL 3.03
plz someone confirm or say else way??
Android isn't compatible with SPL 3.03 only if you're using a NAND build.
You can always get a SD build and have it run from there.
Now, HSPL for 3.03 is here: http://forum.xda-developers.com/showthread.php?t=609477
As you can see, it works with SPL 3.03.
Now, read this: http://forum.xda-developers.com/showthread.php?t=829954 and it'll say that HSPL3.03 works with Android builds.
The only thing is that it should be using a SD build. Download a SD Build and copy the "Android" folder to your SD Card. First click on CLRCAD.exe then click on HARET.exe.
Leave your phone alone for about 10-15 minutes and it should automatically boot into Android afterwards.
Then restart the phone to finalize the install just in case.
zvika12 said:
are you sure in what you are saying that HSPL4 will work on spl 3.03 because in threads here it is written in big red bold that HSPL4 doesn't work with ANDROID/WP7 and SPL 3.03
plz someone confirm or say else way??
Click to expand...
Click to collapse
As naturesbless says, with HSPL4 you can downgrade SPL 3.03 to HSPL 2.08
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Hi i just flas my hd2 with hspl2 flash radio 2.15.50.14 and i cant flash wp7 or android.. After maglrd my hd2 got white screen with hts logo. So i put wm6.5 everything working but if i try run android from sd nothing black screen with htc logo..... Plese help i want wp7
Did you flash HSPL version 2.08 as this is the only HSPL MAGLDR supports? Also did yiou flash MAGLDR 1.13? I bet you did not flash the right HSPL though. Try flashing the 2.08 HSPL and then MAGLDR. check my sig for links for both HSPL and MAGLDR 1.13.
i dont know i got hspl2run and magdrl 113... so what can i do?? flash hspl again????
i download hspl2run from:
http://forum.xda-developers.com/showthread.php?t=611433
them i instal hspl2run chose 1.42.hspl
any idea????
You need to learn to SEARCH before asking
The Radio you flashed is Great stay with it
for HSPL http://forum.xda-developers.com/showthread.php?t=611433
READ the thread You need HSPL2.08 to run Android / WP7 / MAGLDR.
Roms well there is a great choice. you might like to try the one in my sig or not.
PLEASE search and read don't just expect others to do all your research for you
trengy said:
i download hspl2run from:
http://forum.xda-developers.com/showthread.php?t=611433
them i instal hspl2run chose 1.42.hspl
any idea????
Click to expand...
Click to collapse
Yes, choose 2.08.Hspl instead, it will not work with any other.
Hello,
My HD2 is defected and I am trying to send it back for another one. The touchscreen doesnt work so I cant take off hspl the way i put it on. I did however hard reset the phone and now it is not showing HSPL on the boot colored screen, only spl 2.08. Is that ok, or will tmobile still know I was messing with the software and charge me for the malfunctioned phone. Any help is appreciated.
jdmstatus said:
spl 2.08.
Click to expand...
Click to collapse
totally missed the important part, does it say 2.08.0000 or 2.08.hspl?
if it says 2.08.0000 then yea thats fine, if it says 2.08.hspl then no, it isn't.
never mind.. sam was faster, as always of course
That means you still have HSPL, you can uninstall it by using the package you used to install it.
VVVVV
It says spl 2.08 Hspl 8g....
I cant uninstall it the same way i installed it because my touchscreen is unresponsive. So when I connect my phone to the computer i cant click on sync so my phone is just thinking I want to charge it.
dont need touchscreen, you didnt use the touchscreen when you installed hspl either.
phone into bootloader
connect usb
run hspl3 or hspl4
choose 2.08.0000 and its stock.
actually, you didnt say if its a tmous or not, if its NOT a tmous, then spl 2.anything will NOT be stock, because 2.x is for tmous (t mobile us)
in this case you would need to use hspl2 or hspl4 and set spl 1.42.0000 or 1.66.0000 or 3.03.0000
I tried running hspl4 while in bootloader but I keep getting an error message saying "the application has failed to start becasue RAPI.dll was not found.."
rapii is caused by windows mobile dev center (or active sync if on xp) not being the latest version. find the MS page for wmdc (or AS) and download it.
Thank you so much guys. It worked. HSPL is off and its only showing SPL 2.08. Does the radio matter?
help me too
my htc hd2 touch goes unreponsive time to time. so i decided to give it up for check up to htc. help me load back wp6.5 rom from boyppc nand rom from magldr. anyone?
Ok I was moving over Andriod from WM65 Energy rom and started to install the MAGLDR and it seemed to load up fine! But once I rebooted, I just get the Energy ROM screen and it won't go further.
Even if I put it back in to BootLoad mode I can't get ActiveSync to connect to continue!
Any ideas?
WinMo ROMs and Android ROMs need different SPL versions. You should reset your HD2 using this step by step guide: http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
You should take the latest stock ROM available, since this includes the latest Radio ROM which you need to run most Android ROMs. Afterwards I suggest installing HSPL2.08 and MAGLDR, CWM again.
Ok, I downloaded the stock rom and extracted the RUU and renamed to leoimg.nbh and did the bootloader thing and it didn't work!
What do I try next?
I know I've had to do the Task29 before when it got like this. Is that what I need to do again?
no need for task29.
there are two 'musts' for magldr to work
1 spl MUST be 2.08.hspl ONLY, no other will work.
In bootloader, does teh spl line say 2.08.hspl? no? magldr will not appear, even though it is flashed ok.
2 radio MUST be one that is compatible with the fabled 576meg ram trick, or to put it another way, it must be compatible with tmous phones, or a third way, it must be a x.xx.50. version radio, not a x.xx.51. version. Also, 2.05.50 and 2.06.50 will not work either. The one that came with your phone wont work, (assuming you don't have a tmous, if you DO have a tmous, you dont need to change radio.)
For ease, go flash radio 2.15.50
When both these conditions are met, and only then, magldr will start.
So, as you are now, ,
phone into bootloader
flash 2.08.hspl
phone back into bootloader
flash radio 2.15.50
back into bootloader
flash magldr
restart.
samsamuel said:
no need for task29.
there are two 'musts' for magldr to work
1 spl MUST be 2.08.hspl ONLY, no other will work.
In bootloader, does teh spl line say 2.08.hspl? no? magldr will not appear, even though it is flashed ok.
Click to expand...
Click to collapse
I believe this is my problem! A while back I mistakenly thought HSPL 3 was an updated version so I put it on. It is the SPL-3.03.HSPL. I'm not sure how to get it off and it doesn't seem to connect via activestink and it doesn't seem to wanna upgade off my card. leoimg.nbh is in root and booted in to bootload mode!
g
Just go back to the boot loader, connect your PC via USB and flash HSPL 2.08 over again. The HSPL application scans which SPL is installed and provides you the SPLs you can flash. 2.08HSPL is your choice.
Also search for radio master thread for HD2 in this forum, download and flash latest radio ROM.
Sent from my NexusHD2 using XDA App
Well, tried reloading of HSPL2 and I got an critical error bad SPL version!
I'll be searching around for this new error if anyone has a solution!
Also, if someone has time to get on Skype, I don't mind dropping down a tip!
p
UPDATED:
Ok, the trick was to use HSPL4 and then downgrade to HSPL2! Back on track! For now!!
Ok, the trick was to use HSPL4 and then downgrade to HSPL2! Back on track! For now!!
Click to expand...
Click to collapse
You arent thinking right about exactly what hspl2, 3 and 4 are. There was no need to even use hspl2, hspl4 can set 2.08.hspl
hspl2 hspl3 and hspl4 aren't different 'versions' of hspl in the way you think, , selecting 2.08.hspl using hspl2 or hspl3 or hspl4 gives the very same 2.08.hspl, no difference. The .exe's are just loader programs, the only difference between them is the phone models and spl's each supports. so when you went to stock and no doubt ended up with spl 3.03.0000 hspl2 wouldnt work because it requires a starting spl of 2.08 or lower, as does hspl3.
using hspl4 does work, because it was released for just that reason, to support spl 3.03, its not 'better' or a higher version than hspl3, its just been tweaked to support more spl's.