Database Users

Error in CACHE: recovery/log (No space left on device)

Error in CACHE: recovery/log (No space left on device) ...
After trying to flashing MTD pathes.... ****.... What i should to do?
I can't falsh any rom now. always had Error in CACHE: recovery/log (No space left on device) ...
try to wipe all, try to fastboot erase system -w...
Always the same result
i can log on Fastboot and Recovery RA 1.7 all fine

****... now i try
fastboot erase recovery
fastboot flash recovery C:/recovery.img
and get
sending 'recovery' <4594kb>... OKAY [ 1.734s]
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verigy fail>
finished. total time: 3.125
....agrrrrrrrrrrrr

after this reboot in recovery... and logo of my phone i see only... in left upper side of screen line: FASTBOOT USB
after this i try :
fastboot erase recovery
got > erasing 'recovery'....
and stack... about 10 minutes i wait... scary.... what i should to do?
i can power off my phone? (battery)

ANtiHazarD said:
Error in CACHE: recovery/log (No space left on device) ...
After trying to flashing MTD pathes.... ****.... What i should to do?
I can't falsh any rom now. always had Error in CACHE: recovery/log (No space left on device) ...
try to wipe all, try to fastboot erase system -w...
Always the same result
i can log on Fastboot and Recovery RA 1.7 all fine
Click to expand...
Click to collapse
ANtiHazarD said:
****... now i try
fastboot erase recovery
fastboot flash recovery C:/recovery.img
and get
sending 'recovery' <4594kb>... OKAY [ 1.734s]
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verigy fail>
finished. total time: 3.125
....agrrrrrrrrrrrr
Click to expand...
Click to collapse
ANtiHazarD said:
after this reboot in recovery... and logo of my phone i see only... in left upper side of screen line: FASTBOOT USB
after this i try :
fastboot erase recovery
got > erasing 'recovery'....
and stack... about 10 minutes i wait... scary.... what i should to do?
i can power off my phone? (battery)
Click to expand...
Click to collapse
I had the same thing yesterday happen but before freaking out I left my phone connected to my pc in recovery with the error on the screen and used ADB to flash a new recovery right over the old one and it worked try that. Boot phone into recovery (if you still can after everything you have done) with your phone connected to your PC, open up ADB and flash the recovery file that way.

i can't boot recovery now... when USB connected and when i try to boot recovery i see only first bootscreen (Orange MTN logo)
and in left upper side of screen "FASTBOOT USB"
and that's all....... =(
coz now i don't have any recovery... only HBOOT...

ANtiHazarD said:
i can't boot recovery now... when USB connected and when i try to boot recovery i see only first bootscreen (Orange MTN logo)
and in left upper side of screen "FASTBOOT USB"
and that's all....... =(
Click to expand...
Click to collapse
Anti I am not trying to be mean but thats cause you freaked out when you saw something you never have before instead of taking a breath and asking first.
If you can hold down the back button and power on your phone and get into the fastboot menu you should still be good. you can flash the recovery image from fastboot. Follow the instructions on amons page to do it.

thx... i trying to flash via fastboot... but always got fast line :
FAILED <remote: signature verify fail>

ANtiHazarD said:
thx... i trying to flash via fastboot... but always got fast line :
FAILED <remote: signature verify fail>
Click to expand...
Click to collapse
I dont really use fastboot much, so I cant help you there but you should be able to flash the recovery. try a different recovery, try Cyanogens recovery file. All I do know is it has to be in the tools folder.

okey! thx, now will try!

ANtiHazarD said:
okey! thx, now will try!
Click to expand...
Click to collapse
No Problem, let me know how it turns out.

=(( it's crazy..
can i flash any rom via Fastboot mode???
Any rom! But for NoneDanger SPL...

ANtiHazarD said:
=(( it's crazy..
can i flash any rom via Fastboot mode???
Any rom! But for NoneDanger SPL...
Click to expand...
Click to collapse
Not that I know of. I could be mistaken but that all has to be done through recovery. But maybe somebody else will chime in on the conversation. If fastboot isnt fixing recovery then, I am sorry to say it but you might just be SOL and you might want to see if your phone is under warranty still. haha
So in CMD on windows you are typing this in:
Copy recovery-RA-dream-v1.7.0.img to a location where fastboot can find it.
Boot your G1 into fastboot mode (boot while holding BACK)
Connect your G1 via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-dream-v1.7.0.img
and its not working? And you placed the recovery img in the tools folder where your sdk is right.

i don't understand what is it:
Boot your G1 into fastboot mode (boot while holding BACK)
I boot into fastbook like this:
Camera+Power, then press SEND
and i got FASTBOOT USB
it is not right?

and all other steps is right!
fastboot devices :
HT94XNG01269
than :
fastboot flash recovery recovery-RA-dream-v1.7.0.img
got:
sending recovery 'recovery' <4602kb>... OKAY [1.750s]
writing 'recovery'... INFOsignature checking...
FAILED <remote: signature verify fail>
finished. total time: 3.141s
Click to expand...
Click to collapse

MD5 sum FINE!...
It's scary... what i should to do... i don't know...

ANtiHazarD said:
i don't understand what is it:
Boot your G1 into fastboot mode (boot while holding BACK)
I boot into fastbook like this:
Camera+Power, then press SEND
and i got FASTBOOT USB
it is not right?
Click to expand...
Click to collapse
I am just going to ask a simple question is your G1 Rooted? with your phone off hold the back button which is the button at the bottom with the arrow then hit the power button you should get a white screen with a little android at the top.

my G1 is rooted... and have NoneDanger SPL. I can't find information about it (HBOOT 1.42.0000, DREA20000)
when i press BACK+POWER i got first boot logo screen and thats all... orange color background and the MTN logo in i square in the middle of the screen.
I got 3 android skaters when press camera+power... only like this...

maybe i can use this:
fastboot flash system rom.zip
Click to expand...
Click to collapse
?
as i remember here http://developer.htc.com/adp.html
file - signed-dream_devphone_userdebug-ota-14721.zip
flash official 1.6 android rom and standart htc recovery....
Maybe i'll try this? how u think?

ANtiHazarD said:
my G1 is rooted... and have NoneDanger SPL. I can't find information about it (HBOOT 1.42.0000, DREA20000)
when i press BACK+POWER i got first boot logo screen and thats all... orange color background and the MTN logo in i square in the middle of the screen.
I got 3 android skaters when press camera+power... only like this...
Click to expand...
Click to collapse
See I am running Danger just like most people, thats the difference in the fastboot access. the 3 android skaters is the proper screen. So you are in the right spot. You should have also menu options like hit menu to reboot etc...I cant remember the others. But still its right. So if you are doing the fastboot commands as posted and it still gives you an error then it was something to do with when you did all those remove commands.
I think you pretty much have a nice heavy paperweight sorry bro. Only thing I think of is keep trying the fastboot command or maybe see if there is a way to flash stuff through fastboot. I dont think there is but you can look and see. Good luck, let me know how it turns out. If I was you I would just go get a slide or the new Galaxy S

ANtiHazarD said:
maybe i can use this:
?
as i remember here http://developer.htc.com/adp.html
file - signed-dream_devphone_userdebug-ota-14721.zip
flash official 1.6 android rom and standart htc recovery....
Maybe i'll try this? how u think?
Click to expand...
Click to collapse
That looks promising you can try that. good luck

[Q] Nexus 10 Hard bricked

Hi all,
My Nexus 10 seems to be hard bricked.
Here the symptoms:
- Can sometimes be put in bootloader mode
- In bootloader mode, no way to put into recovery mode (the buttons vol up/down do not change the mode = it stays onlw in "Start")
- In bootloader mode, fastboot does not show the device (and of course no way to flash)
- Of course, no OS installed and no way to boot properly
The device seems to be recognized as "Samsung Gadget Serial"..
Any help is welcome !
Thanks
OK FORGET ABOUT IT
I found how to put in recovery mode : press power and BOTH volume UP and DOWN at the same time.

opolette said:
Hi all,
My Nexus 10 seems to be hard bricked.
Here the symptoms:
- Can sometimes be put in bootloader mode
- In bootloader mode, no way to put into recovery mode (the buttons vol up/down do not change the mode = it stays onlw in "Start")
- In bootloader mode, fastboot does not show the device (and of course no way to flash)
- Of course, no OS installed and no way to boot properly
The device seems to be recognized as "Samsung Gadget Serial"..
Any help is welcome !
Thanks
OK FORGET ABOUT IT
I found how to put in recovery mode : press power and BOTH volume UP and DOWN at the same time.
Click to expand...
Click to collapse
Seems an hw problem...

attempted downgrade to kitkat failed -flash-all.bat unable to find boot.img
roscio1975 said:
Seems an hw problem...
Click to expand...
Click to collapse
Hi Guys,
I'm a newb to XDA-developers.
I'll start from the beginning. downloaded image of kitkat from developers.google.com. and abd tools. Typed the fastboot oem unlock in the cmd line and wiped the cache and date/factory reset.
following this I then restarted the tablet and ran flash-all.bat.
On doing this the following was stated in the cmd line:
erasing "recovery"
OKAY
******Did you mean to fastboot format this partition?
erasing 'system'...
OKAY
******Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY
sending 'bootloader'...
OKAY
writing 'bootloader'...
OKAY
rebooting into bootloader...
OKAY
(at this point the tablet restarts)
<waiting for device>
error: update package missing boot.img
I am now left with it continually with the droid on its back no matter what option I select apart from power off.
If it helps, here's the device info
Product name: manta
Variant: wifi
H/W VERSION: 8
BOOTLOADER VERSION: 8
CARRIER INFO: NONE
SERIAL NUMBER: iT STATES IT
LOCK STATE: UNLOCK
REBOOT MODE FLAG: NONE
Its the none that really worries me
Please help!!!!!
Thanks

Softbrick - Can't do anything execpt booting into fastboot - P9 Lite VNS-L21

Hello guys!
I recently wanted to upgrade to Nougat but now my P9 Lite seems softbricked. I own the version VNS-L21 but installed the oeminfo from an dual-sim VNS-L31, this worked for me under MM.
But now I can't boot into system or recovery. The only thing I can do is boot into fastboot. From there I can only flash boot.img or recovery(2).img. I'm unable to flash system.img, fastboot says the following:
Code:
\path\to\rom>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (430553 KB)...
OKAY [ 11.231s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 11.255s
I've tried both VNS-L31(tried B100) and VNS-L21 (tried B151) and B336 system.img files, all fail with the same message. When I flash a recovery.img file and try to boot into it my phone just stucks at the "Your device is unlocked and can't be trusted..." screen.
What can I do? Can someone help me to get at least the recovery working again? I've already tried meticulu's TWRP (V1 and V2) and BadWolfYe's Revolution (b. 9).
Regards,
- 4240Benny

Are you sure to have pressed the right buttons? It's Volume Up+Power button.
Try also to boot into recovery directly from fastboot:
fastboot boot twrpname.img
Click to expand...
Click to collapse

Potato997 said:
Are you sure to have pressed the right buttons? It's Volume Up+Power button.
Try also to boot into recovery directly from fastboot:
Click to expand...
Click to collapse
Yes, I've used Vol + and Power for booting into recovery. When I try to boot directly into recovery using the command you've posted I get the following message:
Code:
\path\to\recovery>fastboot boot recovery_twrp.img
downloading 'boot.img'...
OKAY [ 0.800s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.808s

Can be try toolkit 0008 twrp

Chisetdel31260 said:
Can be try toolkit 0008 twrp
Click to expand...
Click to collapse
Could you send me a link plese? There are many toolkits out there...
EDIT: Foud it

Chisetdel31260 said:
Can be try toolkit 0008 twrp
Click to expand...
Click to collapse
Ok, so I've tried flashing TWRP with the toolkit, it finishes successful but I still can't boot into recovery (Using Power, Vol+ and Vol-), i'm still stuck. (see Screenshot below)

4240Benny said:
Ok, so I've tried flashing TWRP with the toolkit, it finishes successful but I still can't boot into recovery (Using Power, Vol+ and Vol-), i'm still stuck. (see Screenshot below)
Click to expand...
Click to collapse
revolution recovery nougatb9 badwolfye Since you have flash nougat
https://mega.nz/#!JNtWRRbb!b2Nor1CXgLsgkYyu8ixfPY4DMi0Ay4nIX01KCGSGiVI
Plug, cable.
Volume - and power.
Flash fastboot flash recovery recovery.img
Remove the cable, pressed volume + and power, when logo huawei lache power. It will happen twrpnougatb9
Sorry, if its not working

4240Benny said:
Ok, so I've tried flashing TWRP with the toolkit, it finishes successful but I still can't boot into recovery (Using Power, Vol+ and Vol-), i'm still stuck. (see Screenshot below)
Click to expand...
Click to collapse
Hi. i have a bit the same problem here. I tried to instal emui 5 like you but i forgot to install the both zips.Well try like this.Pres volume up+power button and hold it. you will get that message like in the photo "Your device is booting now..",when you get this message keep holding the bottons until you get in erecovery,but hold and wait..From there you will have 3 options:1)Connect to wi-fi and recover.2)Reboot and 3)shotdown(or something like that).You will press on the 2,Reboot.Now your device will rebot and you will get a message like this:"For erecovery pres vol up for 3 seconds" and "To continue press power boton for 5 seconds" You will press power or you will wait couple of seconds and then the phone will start booting.

Try to do what helped me. 1-flash twrp for nougat (it should work) 2-copy MM APP file to dload folder 3-flash l21 oeminfo via adb sideload 4-reboot to bootloader and flash boot, system and recovery from b329 app file 5-power on phone holding vol+and vol- buttons

TWRP hangs - no menu, no fastboot, no edl possible...

Today i tried to flash RR on my Axon 2017G.
So i wiped the partitions mentioned in the instructions, and i tried to change the filesystem. Suddenly got a shutdown, and after that the TWRP starts until the strartscreen. Not more...
I can connect with adb, can see "recovery", but no reaction on "reboot to edl".
The other way i can boot with all three buttons, and then i reach a menu with bold red "recovery mode", that i can change to "Start" (green), "Start bootloader" (in red, and choosing that leads me back to even this menu), and "Power off" (white).
Below that is "Fastboot mode" (little text, red).
But using fastboot mode only says "waiting for device"...
So: Is there a way to get into edl mode to flash recovery again?
Or can i use it as a doorblocker?
Bommel

bommelkopp said:
Today i tried to flash RR on my Axon 2017G.
So i wiped the partitions mentioned in the instructions, and i tried to change the filesystem. Suddenly got a shutdown, and after that the TWRP starts until the strartscreen. Not more...
I can connect with adb, can see "recovery", but no reaction on "reboot to edl".
The other way i can boot with all three buttons, and then i reach a menu with bold red "recovery mode", that i can change to "Start" (green), "Start bootloader" (in red, and choosing that leads me back to even this menu), and "Power off" (white).
Below that is "Fastboot mode" (little text, red).
But using fastboot mode only says "waiting for device"...
So: Is there a way to get into edl mode to flash recovery again?
Or can i use it as a doorblocker?
Bommel
Click to expand...
Click to collapse
The 'bold red recovery mode text' mode that you described is Bootloader mode (or fastboot mode). It's really weird that you have it. Did you have Android 6 before messing up?
You can try to put a TWRP 3.1.1-0 img on the folder where you have fastboot, then get to that 'Fastboot mode' that made your phone say 'waiting for device'then fire up CMD and write 'fastboot boot TWRP' and hit Tab, if the name appears right hit Enter and it shouls boot a TWRP image on your phone (NOT the one you have installed)

Choose an username... said:
The 'bold red recovery mode text' mode that you described is Bootloader mode (or fastboot mode). It's really weird that you have it. Did you have Android 6 before messing up?
Click to expand...
Click to collapse
No, i had stock 7.1.1, B02
You can try to put a TWRP 3.1.1-0 img on the folder where you have fastboot, then get to that 'Fastboot mode' that made your phone say 'waiting for device'then fire up CMD and write 'fastboot boot TWRP' and hit Tab, if the name appears right hit Enter and it shouls boot a TWRP image on your phone (NOT the one you have installed)[/QUOTE]
[email protected] /usr/bin $ sudo fastboot boot twrp-3.1.1-0-ailsa_ii.img
downloading 'boot.img'...
OKAY [ 0.718s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.738s
Tried to flash then:
fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (17917 KB)...
OKAY [ 0.856s]
writing 'recovery'...
OKAY [ 0.138s]
finished. total time: 0.995s
It works. Problem was: I have to do it as a super user!
Thanks for your help...

rooted h918 stuck in bootloop. Can't access TWRP!

My main rooted v20 phone got bumped and now is stuck in a bootloop. I can enter fastboot (some commands working) but can't access TWRP recovery using either VOL + UP and USB cable or VOL DOWN + POWER. I believe the phone is on 10j or 10k if I remember correctly. Bootloader and carrier are unlocked.
Is there a way to just reflash TWRP safely and attempt data recovery and ROM installation without factory reset?
My goal is to attempt recovery first. If that is not an option, I would like to flash to 10p so I can start the rooting process using Lafsploit.

DirtyBreakz said:
My main rooted v20 phone got bumped and now is stuck in a bootloop. I can enter fastboot (some commands working) but can't access TWRP recovery using either VOL + UP and USB cable or VOL DOWN + POWER. I believe the phone is on 10j or 10k if I remember correctly. Bootloader and carrier are unlocked.
Is there a way to just reflash TWRP safely and attempt data recovery and ROM installation without factory reset?
My goal is to attempt recovery first. If that is not an option, I would like to flash to 10p so I can start the rooting process using Lafsploit.
Click to expand...
Click to collapse
Sure, to flash twrp in fastboot mode you do this.
Download latest twrp
With the phone off hold vol down plug USB into phone and computer.
type on your computer:
fastboot flash recovery twrp-3.6.2_9-0-h918.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20

U
Darnrain1 said:
Sure, to flash twrp in fastboot mode you do this.
Download latest twrp
With the phone off hold vol down plug USB into phone and computer.
type on your computer:
fastboot flash recovery twrp-3.6.2_9-0-h918.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20
Click to expand...
Click to collapse
Unfortunately no joy. I tried fastboot boot and flash commands and even tried renaming the img file. I tried with 3 different versions of twrp. This was the result:
PS C:\Users\User\NexusTools> fastboot boot twrp-3.6.2_9-0-h918.img
Sending 'boot.img' (24948 KB) OKAY [ 0.771s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse
PS C:\Users\User\NexusTools> fastboot flash recovery twrp.img
Sending 'recovery' (23512 KB) OKAY [ 0.854s]
Writing 'recovery' FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse
I've searched the forums and internet for hours and not coming up with anything. Any other ideas?
Just a note when trying to cold boot to twrp using 'UP VOLUME + CONNECT USB' that the screen flashes download mode for a split second and then reboots.

DirtyBreakz said:
U
Unfortunately no joy. I tried fastboot boot and flash commands and even tried renaming the img file. I tried with 3 different versions of twrp. This was the result:
I've searched the forums and internet for hours and not coming up with anything. Any other ideas?
Just a note when trying to cold boot to twrp using 'UP VOLUME + CONNECT USB' that the screen flashes download mode for a split second and then reboots.
Click to expand...
Click to collapse
That's so odd I have never seen this issue before.
You can try flashing the twrp image to the boot partition.
fastboot flash boot twrp.img
fastboot reboot
Should boot rite into twrp then because the twrp image is on the boot partition. Sounds to be like there may be a hardware problem with this phone.

Darnrain1 said:
That's so odd I have never seen this issue before.
You can try flashing the twrp image to the boot partition.
fastboot flash boot twrp.img
fastboot reboot
Should boot rite into twrp then because the twrp image is on the boot partition. Sounds to be like there may be a hardware problem with this phone.
Click to expand...
Click to collapse
Well unfortunately the flash boot command failed also. I'm guessing because it shows the boot partition size is 0. Any possible way around this?
I'm hoping not but I think you might be right about a possible hardware issue...
PS C:\Users\User\NexusTools> fastboot flash boot twrp.img
Warning: skip copying boot image avb footer (boot partition size: 0, boot image size: 24076288).
Sending 'boot' (23512 KB) OKAY [ 0.817s]
Writing 'boot' FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse

DirtyBreakz said:
Well unfortunately the flash boot command failed also. I'm guessing because it shows the boot partition size is 0. Any possible way around this?
Click to expand...
Click to collapse
I think it's a hardware issue with the ram. I cant think of anything else.
Do a search online for the error message.
Writing 'boot' FAILED (remote: 'unknown command')