Hello,
Called my wife yesterday via gtalk 1.3 on her macbook pro, but she was able to see me but she couldn't hear my voice while i could see and hear clearly, nothing in the settings on both devices i could change to fix that, tried it also on my macbook pro with the same result.
can't hear voice on mac while video chatting with NS.
is there anything i can do to fix this?
Related
I was wondering if anyone has been able to use Skype sucessfully for VOIP on the 6800 series? I have Sprint Mogul running the 3.16.NO2.5047 build and I get the sound of the ringing and dialing, but when the voice should connect, I don't hear anything. People on the other end cannot hear me either. Can anyone confirm if this is an issue with my build or is there a issue with the Skype software?
Thanks.
http://smarthacks.com/2007/06/26/working-pocket-skype-low-cpu-trinity-p3600
get version 2.2.0.18
Thanks, I'll give it a try.
Hi Again,
RE: the old Voice Command issue with the Touch....When I am using my bluetooth, I hit the call button on the earpiece and get the tone. I say, for ex., "call home", and get the usual voice response, "Call Home?", to which I respond yes. Then i just get the end tone. It doesn't dial the number. Works fine without ther bluetooth. My understanding was VC didn't work at all with BT, but now that I'm this close, I'm wondering if there is a fix...Also, not to beat a dead horse, but anything new on voice notifications, especially Email and appointments. I really miss that from my old BlackJack with VC 1.5....
Thanks all,
Gary
Bluetooth and Voice Command 1.6 work perfectly on my Touch Cruise. (Although, it might be causing an issue with A2DP...I have to investigate to make sure though.). Eitherway, the point of my post was to let you know that VC 1.6 does over bluetooth, with not only commands, but also voice notifications coming over properly. So maybe the problem is your Radio ROM? Have you tried any others? Do the Radio ROMs from the MSM7200 models work for you guys with the MSM7500? If so, the most upto date Touch Cruise Radio ROM could do the trick for you.
Similar problem here.
With my stock touch, VC1.6 works better then with previous devices, but still not 100%.
I can initiate calls by pressing the button on my headset and, unlike devices of the past, notifications can be heard via the headset.
Where I have a problem, is in VC recognizing my response to confirmations. Anotherwords, if I have confirmations turned on for voice dialing, and say "dial Michele at home", VC will come back and confirm "dial Michele at home?". But when I acknowledge and say "yes", it does not recognize this, and times out.
If I turn confirmations off completely, everything works fine.
You can actually hear the confirmations lol? When I tried it I could barely hear the confirmations.
Dew.man,
How do you turn off confirmations? I can see the check boxes for voice enabling, and calendar reminders, but nothing about disabling the confirmations. (I have ver. 1.60.4622, is there a newer one?) Also, (for mindfrost) regarding the volume thru the bluetooth, there is a fix for that which works great. I'm at work and I'd have to look for it, but it is probably on this site . And the ever popular "audiopara" fix works GREAT for all other volume issues. Just drop the folder in the phone's windows directory. It is available on this site as well.
Gary
garpt said:
Dew.man,
How do you turn off confirmations? I can see the check boxes for voice enabling, and calendar reminders, but nothing about disabling the confirmations. (I have ver. 1.60.4622, is there a newer one?) Also, (for mindfrost) regarding the volume thru the bluetooth, there is a fix for that which works great. I'm at work and I'd have to look for it, but it is probably on this site . And the ever popular "audiopara" fix works GREAT for all other volume issues. Just drop the folder in the phone's windows directory. It is available on this site as well.
Gary
Click to expand...
Click to collapse
I would love to know the fix for the BT issue, please post.
After months of tweaking (including Jetware, that doesn't even have direct support for Touch), I did finally get MS VC working well on my Touch, even with voice confirmation and all. But it would take out my A2DP stereo capability time and time again. I implemented every other tweak and tip out there. Besides A2DP being unusable, it would also take out being to listen to Sprint TV over a BT headphone, which was a real bummer.
About 3 months ago I finally gave up VC. I had to ask what were my must haves, and they were rock solid A2DP to play my Rhapsody to-go tracks on the memory card with my two BT stereo headphones, and listening to SprintTV over the BT mono or stereo. Voice command was third on the list, and I'd just had to survive with the mickey-mouse voice dialing that came with the Touch... I uninstalled the MS VC for good.
Now everything is rock solid, and I much regret the literally hundreds of hours of my life I wasted on VC, not to mention my $40 bucks.
For those of us who don't use stereo bluetooth.. ie, myself I'd love to know what the fix was for getting the confirmation volume corrected. It'd make voice dialing in noisy places (such as while driving, in airports, etc) a whole lot easier. If anyone in this thread recalls, what was the solution to that?
I can't get the (last) Skype 3.0 for Windows Mobile to work on my X2 (MR2).
The app installs fine, connects fine to the Skype NW, shows status information correctly, etc.
But when I call echo123 to try and test my VoIP call audio quality, it:
- does not record my message, or
- does not replay my message
I can hear the echo123 female voice message fine, but I guess "something is wrong with my audio settings...." as she keeps repeating to me.
Thanks for any assistance or other feedback.
Skype ? microphone not picking up my voice ?
Hi,
I can make calls and I can hear my correspondents fine,
it's just that they don't hear me at all .....
Why is the X2 microphone not picking up my voice when in a Skype call ?
The microphone works since I can make regular calls without a problem.
Please Help, Anyone got a clue ?
AudioSwitch fixes Speakers, not Microphone
Hi, while I wait for someone else to join his/her findings, I keep on testing.
Today I installed AudioSwitch.exe. Works great to switch Skype audio to the internal speaker. Didn't change a thing to my microphone not working.
How can I get that microphone to be used as the audio input for skype calls ?
I too await a skype app that works well with the x2!!
Look at the: skype in xperia x2? problem on nimbuzz - Thread. This version works fine. (I've posted the link but i'm not allowed to.)
I face exactly the same a.m. problems ! What is curious is that BEFORE MR2 - same cab Skype_WM3.0 was installed and worked flawlessly. Therefore my guess is that issue comes from skype itself - as they said in www.skype.com "everybody already installed will continue to work..." but after I make an update to MR2 - everything was erased and I have to install cab again, so I guess it counts as a new installation and that is why from skype they "cut" microfone etc...
http://forum.xda-developers.com/showthread.php?p=6853294#post6853294 go ahead and read this and see if it helps at all
Anyone else get this after updating to 2.2 today, or ever?
When I try either Vlingo or Google Voice search over Bluetooth all I get is bad feedback. it's like the speaker on the phone or the mic is not being disabled.
Anyone else experience this? it's quite annoying.
I haven't tried vlingo or google voice but I have used the bluetooth dialing in 2.2 on JK3 and JK4 andit sucks even with one of the best quality headsets, Plantronics Voyager Pro, in semi noisy enviroments, driving a truck and van.
If the dialer doesn't just get the wrong name, sometimes it tries to take your voice input and create some bizzare digits to dial. At least when I used WM6 and Microsofts voice dialer it told you what it heard and then you could say no or cancel and it would stop. NOT this dialer. It'll just dial away whatever it thinks you said.
1 trick might be to make sure every number has a mobile and landline number, then at least it would ask you which to dial, at which point you could say cancel.
i'd be happy if it heard anythign. all I get is BAD feedback.
i reinstalled the app and will try again, but if it's happening with both google and vlingo reinstalling vlingo won't help.
I'll also try re-pairing...hopefully that's all that's needed.
Hey,
Just curious is there and app, hack, or whatever to use the mic on your mobile phone as a mic for your nook. To connect using bluetooth?
My bluetooth on the nook works great between it and my phone. I am using nighly build 54 of CM7 with Dalagin's OC kernel.
In a slight hijack, where do I start using bluetooth? Can I:
Tap a contact and dial it on my phone?
Pop up an incoming call notification on my NC?
I know that (at least some of) this will depend on the profiles on my phone, but if my phone+NC == Android phone, I'm very interested.
To my knowledge, bluetooth microphones are still not working. That means using your phone as the mic would probably not work as well.
As for the notifications, an interesting idea. I think that they would have to be an application on the phone to reinterpret how your phone handles incoming calls. I don't know too much of the specifics so cannot give any useful information on this...
Regarding selecting a contact and having it call on your phone, I think that you could potentially rig a google voice account to do that for you. I know that you can use the webUI for google voice to make a call and connect your mobile to whatever number you want to call, so I think it is feasible to mimic that functionality using the NC's contact lists (which should be your google contacts anyway). Hope that helps.
I'm running 7.0.2 stable and I have had no luck getting a bt headset to work. It pairs just fine but has been completly un-usable. I'm using csipsimple for a phone app (Have tried others as well) but everytime I recieve a call or try to go off-hook to place one the app crashes with the headset paired. Otherwise it works fine, it registers with my pbx just fine and will notify me of vm I have.
I have a asterisk pbx setup at my home and have setup my HTC Eris (hero) running cm7 just fine with the same config (App+headset)
But the nook not so much.. I belive the mic function of the bt pair isn't working properly yet.
I'm usign GrooveIP (Market) for my VOIP app. It ties in w/ GoogleVoice and I can make and receive calls no problem. However, I cannot have my paired BT headset work with the app. No audio to or from the headset.
Has BT development been put on hold right now? I would like to get this going, but I am not a high level programmer. I will offer what assistance I can.
Did you get a wired headset to work? I got groove to call and I could hear clearly on my end,but they got nothing on the other end. Then when I hangups, groove crashes out.
Nook color cm7
GrooveIP and NOOKcolor
buynary said:
Did you get a wired headset to work? I got groove to call and I could hear clearly on my end,but they got nothing on the other end. Then when I hangups, groove crashes out.
Nook color cm7
Click to expand...
Click to collapse
It's a known issue w/ GrooveIP. I've sent log files over to the devs of GrooveIP, and they are very responsive and I believe genuinely interested in getting their app to work w/ the NC.
With that said, I think the majority of the problem resides in establishing two-way voice communication between the headset and the NC. What it involves to fix that, I am not sure yet, but I am digging into it further on my free time. Again, I am NO programmer (I wish I had the aptitude to get past prime reads), but I will do what I can.
any further progress on this, gents?