Dear All
I have problem with my SGS.Is not recognized anymore in Download mode and normal mode as well.I have done all drivers updates and there is still no luck.I have done that on 2 diffrent PC's and nothing.Also did checked diffrent usb cable and that did not work either.Few days back everything was fine when i was on Juwe Rom.Now im on CRISKELO v62.Please help.
Guys any ideas please.??
Sent from my GT-I9000 using XDA Premium App
Guys any ideas please....
Sent from my GT-I9000 using XDA Premium App
Check for damaged pins on the phones micro usb socket.
This happened to me before but was able to straighten it out using a fine needle as a temp fix.
Wow.... Mate, thanks a million that worked for me.
popil said:
Check for damaged pins on the phones micro usb socket.
This happened to me before but was able to straighten it out using a fine needle as a temp fix.
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
hehe, how did u crooked your pins anyway?
To honest i have no idea....
mrsufgi said:
hehe, how did u crooked your pins anyway?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
popil said:
Check for damaged pins on the phones micro usb socket.
This happened to me before but was able to straighten it out using a fine needle as a temp fix.
Click to expand...
Click to collapse
You are a life saver...
Related
I'm sure this has already been posted but couldn't find it. But I was trying to flash one of the roms that were posted in here with odin3 and when I put the phone in download mode and Hooke it up to the computer I get either device not recognized or device.malfunctioning but mass storage works no problem. I use the cable that came with the phone and used every USB port on the computer. Any suggestions?
Sent from my SPH-D700 using XDA App
Have you installed Samsung Galaxy S drivers?
I had that problem when trying to flash EB13.
From what others have said here (and my personal experiences with trying to flash EB13) the cable the Epic comes with is crap.
When using another cable, I had much more luck in getting Odin/Windows/Samsung Updater to see my phone.
YMMV though, but it worked for me.
I think you should re-install the drivers, and try a USB port on the back of the computer. Usually the ports on the front of the computer aren't the best for these things.
Sent From My Command Center... (aka basement)
Reboot computer and reboot phone and try it again thats what worked for me in the past
Reinstall the Epic drivers from Samsung. Make sure to use the back ports on the back of your computer that are on the motherboard. These will provide better and cleaner power to your device, also cycle both the computer and the phone and don't plug in the device till after you have went into download mode. This should fix your problem.
Same thing happened to me. I tried using the micro USB cable from my wifes Blackberry. Works great now. Samsung's cables suck
87Octane said:
Have you installed Samsung Galaxy S drivers?
Click to expand...
Click to collapse
I've installed uninstalled and installed the drivers again. Tried the USB ports in the front and back of the computer. I'll try and buy a new cable and see if that works.
Thanks for all the suggestions
Sent from my SPH-D700 using XDA App
Have you tried turning it off and on again?
dmanwithnoname said:
Have you tried turning it off and on again?
Click to expand...
Click to collapse
Yeah I've tried everything I could think of except using a different cable. Gotta wait and buy a new cable
Sent from my SPH-D700 using XDA App
ichefae85 said:
Yeah I've tried everything I could think of except using a different cable. Gotta wait and buy a new cable
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Dude I had this exact same problem. What os are you running? and is it 32 or 64bit? I had this problem on windows 7 64bit. I had to connect my to an xp os and wham it detected it fine and did its thing. Weird i know but it worked.
P.S: changing the cables for me didn't work. I just used another computer which was on xp.
Pvt WhoOkid said:
Dude I had this exact same problem. What os are you running? and is it 32 or 64bit? I had this problem on windows 7 64bit. I had to connect my to an xp os and wham it detected it fine and did its thing. Weird i know but it worked.
P.S: changing the cables for me didn't work. I just used another computer which was on xp.
Click to expand...
Click to collapse
I'm using a 32bit with XP. So I don't know haha
Sent from my SPH-D700 using XDA App
im having the same issue on EB13..
every port, any computer from win xp Pro to win 7
to 3 different cables..
it charges FINE.
wont mount or recognize in computer...
i am thinking...... something i flashed....
like asop screen (from dk28) or genocide 0.2a kernal or something..
dmbatson said:
im having the same issue on EB13..
every port, any computer from win xp Pro to win 7
to 3 different cables..
it charges FINE.
wont mount or recognize in computer...
i am thinking...... something i flashed....
like asop screen (from dk28) or genocide 0.2a kernal or something..
Click to expand...
Click to collapse
I can get mine to mount no problem it's weird
Sent from my SPH-D700 using XDA App
I recently reformatted and couldn't get odin to work. I put my phone in debug mode and when I connected it windows ended up installing something else and everything worked after that.
Windows 7 64 bit with 64 bit samsung drivers.
Sent from my SPH-D700 using XDA App
ichefae85 said:
I'm using a 32bit with XP. So I don't know haha
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Beats me then. Try a different computer.
Guys I've had this issue and tried everything you guys have and some. Look at the port directly on your phone. there are tiny little copper contacts on the tooth that can get bent.
You will have to use some tweezers to get it back down but look at this before buying a new usb cable as this was my issue
seoulseek80 said:
Guys I've had this issue and tried everything you guys have and some. Look at the port directly on your phone. there are tiny little copper contacts on the tooth that can get bent.
You will have to use some tweezers to get it back down but look at this before buying a new usb cable as this was my issue
Click to expand...
Click to collapse
I checked that and didn't find anything bent in the USB port on the phone. Might try new cable and different computer when I have access to both
Sent from my SPH-D700 using XDA App
Okay stupid question. Doest it make a difference if the phone isn't fully charged? Haha if so then I'm stupid haha
Sent from my SPH-D700 using XDA App
I have done flashes with thirty to forty percent battery. I don't think odin checks your battery. I would caution against flashing with to low of a battery as your phone can die during a flash.
Sent from my SPH-D700 using XDA App
Here's a small little "unboxing" I did. Try not to laugh too much at my southern-self I'm not good with a camera, I'm shy ^_^
http://www.youtube.com/watch?v=JBRihHh4R-4&feature=youtube_gdata_player
Sent from my perfect epic
Lol nice... now odin your old broken epic and root your new one woooo first
Sent from my SPH-D700 using XDA Transparent App
Nice unboxing makes me wish I had a brand new one
Hope you got one from a good batch that let's you overclock as high as you want or undervolt. I will be interested to see what differences you have between the two
Sent from my SPH-D700 using XDA Premium App
I can't believe they send a new 16gb sd card with the replacement. I need to replace mine as well, it has cracks on the top corner of the screen.
Edit: do you have to send a 16gb card back in order to not have a penalty?
Sent from my SPH-D700 using XDA App
No you keep your old card battery charger everything only thing they want is the phone you even keep the old battery back
globalninja said:
I can't believe they send a new 16gb sd card with the replacement. I need to replace mine as well, it has cracks on the top corner of the screen.
Edit: do you have to send a 16gb card back in order to not have a penalty?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA Transparent App
steviee7 said:
No you keep your old card battery charger everything only thing they want is the phone you even keep the old battery back
Sent from my SPH-D700 using XDA Transparent App
Click to expand...
Click to collapse
What he said. They say not to send it back. Just the phone.
Ok, so im trying to root using the same method i did last time. but i cant get the drivers to install completely 4/5 install fine but: CDC Abstract Control Model (ACM) is stuck on Installing driver software. Adb says the device is attached, but offline. Any suggestions? Usb debugging is enabled.
Didn't you already have the drivers installed?
Help support autism awareness,it only takes 2 seconds to help make a difference...
http://picketfenceblogs.com/vote/3616
zanderman112 said:
Ok, so im trying to root using the same method i did last time. but i cant get the drivers to install completely 4/5 install fine but: CDC Abstract Control Model (ACM) is stuck on Installing driver software. Adb says the device is attached, but offline. Any suggestions? Usb debugging is enabled.
Click to expand...
Click to collapse
1. Plug in epic
2. Go to device manager
3. Uninstall anything samsung, google, android, sprint and epic.
4. Check add or remove software a make sure all drivers are gone
5. Unplug phone
6. Install drivers using the exe
7. Root
ecooce said:
Didn't you already have the drivers installed?
Help support autism awareness,it only takes 2 seconds to help make a difference...
http://picketfenceblogs.com/vote/3616
Click to expand...
Click to collapse
Yes, but when i plugged it in, it started installing stuff. I unplugged it, and plugged it back in. It worked this time.
Nice video
qbking77 said:
Nice video
Click to expand...
Click to collapse
Thanks. Lol
Sent from my SPH-D700 using XDA App
zanderman112 said:
Ok, so im trying to root using the same method i did last time. but i cant get the drivers to install completely 4/5 install fine but: CDC Abstract Control Model (ACM) is stuck on Installing driver software. Adb says the device is attached, but offline. Any suggestions? Usb debugging is enabled.
Click to expand...
Click to collapse
it will work without that one.
CrfEpic4g said:
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Forget something? lol
CrfEpic4g said:
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA Transparent App
steviee7 said:
Sent from my SPH-D700 using XDA Transparent App
Click to expand...
Click to collapse
Haha
Sent from my perfect epic.
Nice... commense the rooting process
Sent from my Nexus S 4G using XDA App
I just had mine replaced this week and on low brightness settings the screen seems to have a yellow green tone. Turn up the brightness and the whites are as white as can be. Any issues with your screen on the lowest brightness?
As for over clocking I have had no issues @1300
Sent from my SPH-D700 using Tapatalk
Is there sum driver not in the new software thats making my pc not recognize my phone anymore
sent using my cup phone nukka
You should choose update driver in device manager and allow Windows Update to search for new drivers.
Could also be a bad cable. They are cheap crap. Get a Blackberry or Palm Pre cable.
Sent from my SPH-D700 using XDA App
Or maybe the 2 of them are going through hard times... Have you tried sending them to counseling?
Lol yeah whut are the odds the cable went bad same day i got the update bought a new cable ****s fine .
sent using my cup phone nukka
Yuck I wouldn't want a cable that ****s fine.
deisel said:
Lol yeah whut are the odds the cable went bad same day i got the update bought a new cable ****s fine .
sent using my cup phone nukka
Click to expand...
Click to collapse
Well **** happens...lol. Glad that worked.
Sent from my SPH-D700 using XDA App
The Root said:
Or maybe the 2 of them are going through hard times... Have you tried sending them to counseling?
Click to expand...
Click to collapse
digiblur said:
Yuck I wouldn't want a cable that ****s fine.
Click to expand...
Click to collapse
LOL, what a couple of comedians!
deisel said:
Lol yeah whut are the odds the cable went bad same day i got the update bought a new cable ****s fine .
Click to expand...
Click to collapse
I doubt the cable "went bad," more like "was a ****ty cable from the get-go." The stock cables are notorious for having connection issues, especially when using Odin or Heimdall.
Thought the cable was bad so i tried wifes evo w same cable and it connected instantly
Can the charging port go bad and only allow a charge and not a data transfer.
So im back to square one phone stopped connecting to pc since update to gingerbread
Any suggestions or insight on the subject
Plz no stupid grammatical comments or sum other dumb **** thnx
sent using my cup phone nukka
What type of cable is it I know lg ones don't work for samsung but will for the evo for some reason. Also it could be windows screwing with you. Is it showing it as an unknown device if so I know a workaround its not too difficult.
Sent from My OG Epic
deisel said:
Thought the cable was bad so i tried wifes evo w same cable and it connected instantly
Can the charging port go bad and only allow a charge and not a data transfer.
So im back to square one phone stopped connecting to pc since update to gingerbread
Any suggestions or insight on the subject
Plz no stupid grammatical comments or sum other dumb **** thnx
sent using my cup phone nukka
Click to expand...
Click to collapse
You spelled fail wrong.
Lol just playing, I say you try installing or reinstalling drivers on the computer, last option would be nandroid your current set up on your phne odin then restore and it should work
Sent from my SPH-D700 using xda premium
Just use airdroid app, my phone refuses to connect to any computer but my sister's laptop, that includes odin. I just gave up on usb's lol
Sent from my SPH-D700 using xda premium
I had this same issue recently and come to find out, it was the cable! Its a cheap crappy cable. I used an old one from a blackberry and it worked better than ever!
Sent from my SPH-D700 using XDA App
Have you checked to see if USB Debugging got checked?
I used a kodak usb cable w a ferrite choke then a blackberry cable a sprint cable and the samsung cable that came w the phone then i tried the evo cable from my wifes phone none worked on my phone they all worked on hers
sent using my cup phone nukka
deisel said:
I used a kodak usb cable w a ferrite choke then a blackberry cable a sprint cable and the samsung cable that came w the phone then i tried the evo cable from my wifes phone none worked on my phone they all worked on hers
sent using my cup phone nukka
Click to expand...
Click to collapse
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I feel like that would definitely be the most likely culprit, seeing as how he updated and it stopped working.
Sent from my SPH-D700 using XDA Premium App
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Having the same problem and that was the fix!! Thanks headed your way!
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
+1 for this. Also, even if your phone is set to PDA, select Modem and then select PDA again. That's what I had to do with my gf's phone to get it to work
Ryan
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
omg i have tried a million different cables and was about to replace the phone thru asurion. this worked!!! thank you so much!!!
The dial code also fixed me!!!!!! But.... Now the usb connected continuously pops up like every two second......
Sent from my SPH-D700 using XDA App
Wht do i do if theirs a cable in pin 4 should i remove it then solder or leave it theres no wire in pin 3
Im base ing the pins on this pic
http://www.droidforums.net/forum/dr...y-make-your-own-motorola-factory-cable-3.html
Sent from my VS910 4G using xda premium
That thread.. meh.
I made my own factory cable today, tested and works fine.
From what I've seen, regular USB cables you get with a phone, kindle or buy at walmart usually do not have a wire on pin 4 at the device end.
It's unused.
My guess would be either you dont have a generic usb cable or you're looking at the pins wrong.
Be careful though, as when I was researching factory cables, I came across refferences of some USB cables with pin 4 tied to ground, which is an OTG cable.
You dont want that either.
I think your best bet is to..
Watch this video: http://www.youtube.com/watch?v=XwwI_6doBWk
Read this thread: http://forum.xda-developers.com/showthread.php?t=1392693
And then buy one from SkOrPn :good:
WretchedXS said:
And then buy one from SkOrPn :good:
Click to expand...
Click to collapse
Lol! Well said.
Sent from my KFHD using xda premium
SO can i break it and connet the 1 pin to it
Sent from my VS910 4G using xda premium
Never mind was looking at the wroung pins
An tips on removeing glue from the board pin 4 is under it
Sent from my VS910 4G using xda premium
I apologize in advance if this has been asked before. I just got my note 3 today its MJ7 and Kingo just hangs on connecting forever it for 10...20...30 minutes. I have disabled anti virus I have enabled usb debugging set screen timeout to 10 minutes and nothing is working. I even unistalled the drivers reinstalled them and even let the Kingo app install. Should I just update to the newest and try like that?
Much help appreciated
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
Kelsey Jones said:
I apologize in advance if this has been asked before. I just got my note 3 today its MJ7 and Kingo just hangs on connecting forever it for 10...20...30 minutes. I have disabled anti virus I have enabled usb debugging set screen timeout to 10 minutes and nothing is working. I even unistalled the drivers reinstalled them and even let the Kingo app install. Should I just update to the newest and try like that?
Much help appreciated
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Hmm, sounds like you are doing everything right. Did you try another usb port or possibly have another pc to try?
njfoses said:
Hmm, sounds like you are doing everything right. Did you try another usb port or possibly have another pc to try?
Click to expand...
Click to collapse
The only thing I haven't tried is a different pc cause I'm nowhere near one smh I have tried a different port. I'm gonna keep trying I need root! Lol.
Sent from my SM-N900V using Tapatalk
Kelsey Jones said:
The only thing I haven't tried is a different pc cause I'm nowhere near one smh I have tried a different port. I'm gonna keep trying I need root! Lol.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Maybe try another cable, if you have one.
njfoses said:
Maybe try another cable, if you have one.
Click to expand...
Click to collapse
That fits the 3.0 output on the note 3? I don't have one ughh
Sent from my SM-N900V using Tapatalk
You can use any micro usb cable. It doesn't have to be the 3.0 cable. A standard micro usb cable fits in the right side of the charging port.
njfoses said:
You can use any micro usb cable. It doesn't have to be the 3.0 cable. A standard micro usb cable fits in the right side of the charging port.
Click to expand...
Click to collapse
Oh I see what you mean I will try that hope it works
Sent from my SM-N900V using Tapatalk