Hey there
i debranded, rooted, downgraded and flashed Android Revoltion HD 5.1.7 on my DHD.
Everything worked fine.
Then I flashed some Sense 3 Addons (in the right order)
And everything worked fine.
THEN I flashed the CRT Addon (which was really cool :-D)
And everthing worked fine.
Well, 2 days later, I wanted to shut down my DHD over the night.
It didnt worked well, cant describe it anymore, but I had to push the POWER button more then twice to finally shut it down.
And on the next morning: the DHD only booted to the HTC Logo.
Bootloader was still there BUT the recovery couldnt be loaded.
SO, after that I used the PD98IMG and flashed it over.
But it didnt worked.
And today, the DHD doesnt even turns on.
My plan was, to connect it to the PC and flash a 1.32. via RUU.
But now, its pretty much dead.
It doesnt even lights up, when its plugged in to charge
Is there anything I could do or try?
Hi,
When you remove & reinsert your battery & plug into your PC do you get an Orange charging LED? Don't try to turn your handset on just yet.
Just tried it, and: yes, orange LED is on
/edit:
Well... that means what?
Is there a chance for hope?
or is it bricked, regardless of that
There is always hope.
While plugged in and with the Orange light showing open a cmd window and navigate to your SDK/platform-tools folder
now run
Code:
adb devices
you should get a readout of your HTC device
now run,
Code:
adb reboot recovery
You should now boot into recovery.
Perform a full wipe, system, data, cache, and dalvik cache. Then reflash ARHD again, and reboot once complete.
You will lose all un-backedup data, but your SDcard data is safe.
Damn..
When I type adb devices, it wont find the DHD..
Its definately plugged into your PC & the Orange LED is on?
Yes.
But i have to say, i had similiar problems in the past:
i couldnt use those "one click tools" for S-Off and stuff.
Have you tried to access the bootloader? Vol Down + Power.
Sure.
But that doesnt work. The DHD doesnt do anything...
Instead of the orange LED when plugged in (but only if i not tried to boot)
Btw.:
after unplugging it from the pc: the orange LED stays on. it wont go off..
i tried it on another pc,
adb devices gives out the list,
but my DHD is not listed
How many HTC devices do you have plugged in? The information it returns should look similar to
Code:
<Your SDK\platform-tools path>adb devices
List of devices attached
HT0[B]xxxxxxxx[/B]6 recovery
I have no other HTC devices plugged in.
and in my case, it looks like:
Code:
<Your SDK\platform-tools path>adb devices
List of devices attached
its just empty -.-
it DID worked on my pc - it was listed and i could 'communicate' over usb
but now, its not listed..
Keep trying, once you get a positive return
run
Code:
adb reboot recovery
or
Code:
adb reboot bootloader
Preferably recovery first.
is it still possible that it works, even if it doesnt at the moment?
ok, i'm gonna try it then
hope dies last..
try reinstall HTC Sync.
Yep just keep trying. Android is a bit unpredictable this way.
Also, just to make sure you have no other factors involved, take out the Sim card and the SD card. Just to make sure no other factors are involved.
thx for the help mates, but i dont think this gonna work.
tried it several times now, and on 3 different pc's.
it just wont work.
i called my provider yesterday and gonna send it in tomorrow
hope it wont take to long AND it wont cost to much (if the find out that its my fault ; )
If PD98IMG.zip cannot restore your phone (did it even load? It should in every case), nothing can. You have to send it to HTC. I would suggest to try PD98IMG.zip again.
Sorry - Testing -
jkoljo said:
If PD98IMG.zip cannot restore your phone (did it even load? It should in every case), nothing can. You have to send it to HTC. I would suggest to try PD98IMG.zip again.
Click to expand...
Click to collapse
At first still could access bootloader and flashed the PD98IMG
But it didnt work.
And now: i cant access bootloader anymore - dhd doesnt boot.
so yeah, i got to send it in
Related
hi there.
ive bought a refurbed hero from "3" uk, however it doesn't boot. it wont go into recovery either (home+pwr).
it will go into the fastboot though (pwr+back).
the phone connects to the pc, and the pc finds the phone using "fastboot devices" and "adb devices".
i tried flashing a custom RA recovery, however i received the message "failed remote not allow".
googling it, i found out it is because of the hboot being 1.76....... which needs flashrec to install a custom recovery. problem is i cant boot the phone to use flashrec.
basically is the phone screwed?
ive called 3 and they are sending a replacement on monday. i will then have to send the old one back to them myself, meaning ive got a few days to make sure the new one works etc, check condition.
thing is the one i have now is perfect and new looking. i could receive a slightly damaged working one on monday, so i want to see if there is anything i can do to fix it.
thanks for any help
What happens when you try to boot up normally? ... Anything?
How about without the SD in?... Does it make a difference?
when i boot up normally, it displays a thin "hero" logo, then after a while displays a htc logo with a green alien popping out.
a minute after that, it starts all over again until the battery is pulled.
tried with and without an sdcard, and no difference.
Flash a new official rru from HTC. If you can't do that you should be able to create a goldcard and flash a the rru that way. Check out parts of my guide and make up the rest.
i just got it sorted.
i downloaded the ruu, tried it while in fastboot mode. it didnt work, so i looked through your goldcard thread, and realised i hadnt got adb setup 100% (device manager had it down as android device or something, so did as instructed in the thread).
connected it up to the pc while in fastboot mode, then ran the ruu. it worked this time!
thanks alot for the help. its saved me alot of hassle sending the phone back.
Hello everybody,
I have a HTC Desire HD which I was using the Android Revolution 6.3.2 with the recommended radio. I was running everything well for 2 weeks more or less.
This last week I went to Croatia for holidays and I realized something. Suddenly, the battery was finishing very fast. Then I removed the battery and put it on again and the nightmare started.
It went to the HBOOT screen and I'm stucked there. Doesn't matter which option I choose, it always back to the same screen. I can select reboot in fastboot, reboot in recovery, and nothing happens. It just back to the same screen over and over again.
I tried to remove the SIM CARD, SD CARD, take the battery off for an hour, and nothing.
I tried to flash the recovery again via ADB, but it doesn't work. It doesn't enter into the recovery. It just still keep backing from the same HBOOT screen.
I tried to run the RUU again. I got two different versions, and in both of them, starts well, it reboots my phone and when it backs, it says "waiting for fastboot" and I got a timeout message saying that the USB cable is not connected (the usb cable is fine).
I tried also to extract the ROM file from the RUU, put on the SDCARD (named as PD98IMG.zip) and run directly on the phone. It didn't work.
I have access from ADB (because when I plug the USB, I can see on the HBOOT screen).
Does someone has any idea of how to solve that? My knowledge is not so deep and I googled/read most of the things I tried.
Any fastboot or adb command that I can type and will bring my phone back?
Thanks for the help guys!
Try running the RUU from fastboot.
Hunt3r.j2 said:
Try running the RUU from fastboot.
Click to expand...
Click to collapse
Do you know how exactly can I do that?
Thanks!
hhoverflow said:
Do you know how exactly can I do that?
Thanks!
Click to expand...
Click to collapse
There is an option for fastboot in bootloader menu, select it and connect phone to computer before running the ruu.
Hunt3r.j2 said:
There is an option for fastboot in bootloader menu, select it and connect phone to computer before running the ruu.
Click to expand...
Click to collapse
will work..
or make a backup in recovery of data and reinstall the rom with fullwipe
you have solved?
Well to make it simple, the newest twrp is very buggy and to make a long story short i installed a new rom, and while it was restoring my data, my n7 shut off. its done this before so naturaly i held the power+volume down buttons too boot into the bootloader but it wont turn on. Any help/ suggestions?
Put it on the power supply and let it there for some time ... Then start again.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
Put it on the power supply and let it there for some time ... Then start again.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thank you ill try that. it was at 33% battery when this happened though
Um... It probably didn't shutoff. There's a screen timeout.
Sent from my Nexus 7 using Tapatalk HD
korockinout13 said:
Um... It probably didn't shutoff. There's a screen timeout.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
i know about the screen time out, i tapped the screen for it to rewake and it didnt work, then i tried pressing the sleep button once for it to unlock and that didnt work. so it indeed shutoff
frap129 said:
Well to make it simple, the newest twrp is very buggy and to make a long story short i installed a new rom, and while it was restoring my data, my n7 shut off. its done this before so naturaly i held the power+volume down buttons too boot into the bootloader but it wont turn on. Any help/ suggestions?
Click to expand...
Click to collapse
I'm confused. It's a little off-topic, but what does "restoring my data" have to do with TWRP in the context of flashing a new ROM?
Anyway, I would proceed with a dead battery or loose battery connector hypothesis first. It's not obvious why writes to /boot, /cache, /data, or /system would affect the bootloader.
Anything is possible at a low enough probability I suppose, but you should start troubleshooting operations with the high-probability scenarios first.
For instance - with the power off, will the "charging screen" display when you plug the tab in? How about APX** mode? (Plug in to PC and start with Power+Vol-up). If you didn't see either of those, it's likely a power supply or hardware problem.
good luck
** make sure you exit APX mode by holding down the power button for at least 20 seconds. I'm not sure if it shuts itself down after an inactivity timeout - you don't want to be draining power while trying to charge the tab.
bftb0 said:
I'm confused. It's a little off-topic, but what does "restoring my data" have to do with TWRP in the context of flashing a new ROM?
Click to expand...
Click to collapse
Well, you backup your data, Wipe data and cache, flash the rom, gapps, ect. then restore data, the charging screen wont dispaly, apx mode doesnt work, but the whole story: went to flash a newer version of my rom, install faills due to error in updater binary so i go to reboot and it says "No OS Installed! Are you sure you want to reboot?" i press dont reboot, go to install the older version of the rom, go to restore data and then it shut off.
frap129 said:
Well, you backup your data, Wipe data and cache, flash the rom, gapps, ect. then restore data, the charging screen wont dispaly, apx mode doesnt work, but the whole story: went to flash a newer version of my rom, install faills due to error in updater binary so i go to reboot and it says "No OS Installed! Are you sure you want to reboot?" i press dont reboot, go to install the older version of the rom, go to restore data and then it shut off.
Click to expand...
Click to collapse
The lack of APX mode or the charger screen suggests a battery problem or a hardware failure, not a software problem. APX mode will be present even if the tablet has absolutely nothing in flash memory.
Having nothing in /system (no OS or even no filesystem) will not affect bootability of either the bootloader or the recovery.
I don't know why you would wipe data only to restore it after flashing a ROM. Usually wiping cache & dalvik-cache is sufficient for "dirty-flashing" a ROM upgrade as it is very unusual for ROM installs to diddle with the /data partition. (But making full backups is always a good idea.)
I would check (carefully) to see if the battery connector came loose before you decide to throw the tablet away.
good luck
bftb0 said:
The lack of APX mode or the charger screen suggests a battery problem or a hardware failure, not a software problem. APX mode will be present even if the tablet has absolutely nothing in flash memory.
Having nothing in /system (no OS or even no filesystem) will not affect bootability of either the bootloader or the recovery.
I don't know why you would wipe data only to restore it after flashing a ROM. Usually wiping cache & dalvik-cache is sufficient for "dirty-flashing" a ROM upgrade as it is very unusual for ROM installs to diddle with the /data partition. (But making full backups is always a good idea.)
I would check (carefully) to see if the battery connector came loose before you decide to throw the tablet away.
good luck
Click to expand...
Click to collapse
Battery connector didnt come loose, still dosent work. guess it might just be broken
EDIT: I plugged it in to my pc and the google screen came up for about 20 sec then it shut back off. havent been able to get anything since
frap129 said:
Battery connector didnt come loose, still dosent work. guess it might just be broken
EDIT: I plugged it in to my pc and the google screen came up for about 20 sec then it shut back off. havent been able to get anything since
Click to expand...
Click to collapse
Is it possible to enter Odin on the n7?
Sent from my Galaxy Nexus using xda premium
Soldier 2.0 said:
Is it possible to enter Odin on the n7?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Odin is Samsung only
Sent from my Galaxy Nexus
You can hold the power button for 10 seconds and wait till you see the Google logo. Then release and hold it 10 seconds again, when the screen turns off hold the volume down button and wait for it till it automatically boots again. You'll enter bootloader mode. Download wugfresh' nexus root toolkit and install it. When the program is loaded there is a flash stock option on the right side of the program. Select the soft brick / boot loop option under the flash button. While in boot loader mode connect your nexus and press the flash button.
This is all I know!
Sent from my Nexus 7 using xda premium
NEXUS 7 Bricked - NO OS - tried everything but...
It's a catch 22 here. I can't get drivers installed and the nexus recognized and so when it comes to flashing/restoring via cmd prompt the PC won't recognize my device and so I can go only get so far. I have no OS installed as I wiped all like an idiot in twrp so how the hell can I get drivers installed on a nexus that has no OS installed? I can't enable usb debugging etc because, well, I have no way of getting the nexus to work so can't get into the settings to do so.
I have tried everything in twrp but there is nothing to restore - i can't get roms pushed onto it - God I give up. All I need is the PC to recognize my device and I know I can crack this. What do I have to do? Please help this idiot.
CarlKirshner1989 said:
It's a catch 22 here. I can't get drivers installed and the nexus recognized and so when it comes to flashing/restoring via cmd prompt the PC won't recognize my device and so I can go only get so far. I have no OS installed as I wiped all like an idiot in twrp so how the hell can I get drivers installed on a nexus that has no OS installed? I can't enable usb debugging etc because, well, I have no way of getting the nexus to work so can't get into the settings to do so.
I have tried everything in twrp but there is nothing to restore - i can't get roms pushed onto it - God I give up. All I need is the PC to recognize my device and I know I can crack this. What do I have to do? Please help this idiot.
Click to expand...
Click to collapse
USB debugging doesn't mean **** when you are in a custom recovery. It has adb already. Your problem is your computer. Fix your computer by following one of the bajillion threads and posts about the nexus 7 drivers issues.
Installing drivers does not need android to be booted.
Your best bet is to put it in fast boot mode and follow Google's own instructions to flash it back to stock.
Sent from my Galaxy Nexus
CarlKirshner1989 said:
It's a catch 22 here. I can't get drivers installed and the nexus recognized and so when it comes to flashing/restoring via cmd prompt the PC won't recognize my device and so I can go only get so far. I have no OS installed as I wiped all like an idiot in twrp so how the hell can I get drivers installed on a nexus that has no OS installed? I can't enable usb debugging etc because, well, I have no way of getting the nexus to work so can't get into the settings to do so.
I have tried everything in twrp but there is nothing to restore - i can't get roms pushed onto it - God I give up. All I need is the PC to recognize my device and I know I can crack this. What do I have to do? Please help this idiot.
Click to expand...
Click to collapse
I must admit I'm a little 'hazy' myself when it comes to ADB related issues... I've never had much cause to use ADB. (Think I've used 'adb pull' on a couple of occasions). And I've never been in the invidious position of not having a bootable Android OS on my Nexus 7 either - which does seems to happen a quite lot with TWRP users, less so with CWM users.
Anyway... just had a tinker... and you could try the following workaround... this seemed to work to for me.
----------------------
Locate the folder on your PC where you keep your FASTBOOT and ADB .exe files...
Copy whatever ROM .zip you want into this folder.
The following example uses SmoothROM-v5.0.zip ... There is nothing to stop you from renaming this to something shorter, for ease of typing later... so, in my case, just smooth.zip.
Boot your Nexus 7 into the BOOTLOADER (Vol down [hold] + Power button), and then into RECOVERY (TWRP) and hook it up your PC.
Open a command prompt window on the aforementioned folder... and type...
Code:
adb devices
...which should yield something like the following...
Code:
List of devices attached
012345679ABCDEF recovery
(If you don't see a serial number... then you definitely have a driver problem...)
Otherwise, it's just...
Code:
adb push smooth.zip /sdcard
Or whatever ROM you wish to 'push' to the emulated SD card.
This will likely take a fair few minutes for a 300Mb+ size file (typically the size of your average ROM)... on my Windows XP box it took 4 minutes (1328 KB/s, 32565894 bytes in 239.486s) to copy over. And there are no 'progress gauges' of any kind, either... So season your patience a liitle. You can always pull up another command prompt window and type adb devices again to ensure you still have an ongoing ADB connection.
Once copied over, and still in TWRP, you can just flash it.
Good luck.
Rgrds,
Ged.
Still nothing on mine. im just about to give up and wait to see if google releases the N7 second generation at the i/o
If You familiar with Linux, You can try to understand the logic of
changing the modes.
You need to run udevadm monitor in one terminal. Then press some
combinations of key/s and look for changes with usb-devices.
The better, if You run wireshark and sniff USB interface with your device.
Put attachment here, with a comments what was pressed.
since it seems to be a hardware problem, not software, im just going to send it to asus and see what they can do.
As the title says, I wanted to try CM installer, and I was on everything stock, not rooted. I downloaded PC, and android programs, followed the instructions, however at one point CM installer on my PC said it cannot communicate with my phone, and it was when it was trying to flash recovery. It said I should try different cable, or USB port, but no luck with either, and now it says my phone is not supported.
I tried to enter recovery, but I only get CM guy and it's stuck, even when I turn off the phone, it turns itself on automatically, and to fully turn it off I need to enter fastboot mode, and then turn off. I tried flashing full stock image (I know how to do that, and I have previous experience on this phone), but my fastboot crashes (Fastboot.exe Has stoped Working), tried to download fastboot again, but nothing helped. I also tried to flash recovery only, and I get the same thing... Also tried to do that with custom recovery, but nothing....
Is there something I can do, or do I need a new phone?
Also, I had like 70% battery when I started, so I am afraid to keep trying, cause if I go out of juice, it's game over, right?
Looks more like issues with your pc communicating with your device, which might have causes other side effects due to that. But I have not tried CM Installer yet.
You should see about getting fastboot working correctly first and getting the right adb/fastboot driver (such as latest Universal Naked Driver, link in my sig). You should also use the latest adb/fastboot .exe from Google, download their latest ADT package. If it still crash, use it on a different machine, if you're on Windows 8 try Windows 7 or Ubuntu.
Also make sure the factory image isn't corrupt, I always have issues downloading it from Google.
Also, I had like 70% battery when I started, so I am afraid to keep trying, cause if I go out of juice, it's game over, right?
Click to expand...
Click to collapse
If the battery goes to 0%, just charge it, do you think everyone throw away their N4 when the battery goes to 0? There is the red light problem, but its an easy fix.
Thanks for answering, I fixed it with a strange method (to me). On CM forum j_cor told me this:
"Your device appears to be stuck in sideload. So the good news is no, you are not bricked. Here is what I would try to do:
1. Boot the device - wait for the "stuck" CM guy to display
2. Plug phone to PC and open a command prompt to the directory to C:\Users\enter_your_name\cminstaller\bundle\win32
3. from the prompt "C:\Users\enter_your_name\cminstaller\bundle\win32>" type "adb.exe sideload ClockwordMod.cer" (no quotes) and hit enter
4. This will try and sideload this .cer file and will fail - but it should kick you out to the main recovery screen. Select the Reboot option from Recovery
5. Device should boot back up. It will most likely still be the stock ROM. My guess would be that something disrupted the sideload process when installing the system.zip with CM."
However, this did not fix my problem, but it got my phone to communicate with fastboot. So I was able to flash custom recovery, and do a factory reset, which brought me to the stock ROM, I flashed CM the old-fashioned way then.....
And my PHONE IS UP AND WORKING AGAIN!!!
The main problem in communication was that phone blocked every time I booted into fastboot, and plugged USB cable in.... It immediately became unresponsive to any commands, after I did this, phone wasn't getting stuck in fastboot, so that solved my issue.
A bit of an SOS situation if anyone knows the right steps please
Well, I restored a Titanium Backup and mistakenly toggled the "restore system apk". It ran fine, all restored and then when I rebooted got stuck.
By "stuck", it re-boots constantly. It shows the LG animation, then all I can see is two messages before it starts booting again:
1) "Unfortunately, Google Play Services Has Stopped"
2) "Unfortunately, System UI has stopped
... and then it does the entire boot sequence, animation, again, and again.
Here is what I can do:
* It is in USB debug mode.
* I have drivers on laptop
* I am able to connect with adb and also shell into phone.
* With adb, I have output to the file an "adb bugreport" as well as an "adb logcat".
* I have several backups:
a) The modemsst1.img and modemsst2.img created by Titanium Backup
b) Titanium backups (full apps and data)
c) an "adb backup - all" backup
* I managed to get it into firmware update mode by pressing the volume up button and the power button and then when it flashed red a few times, just the up button. So, I can get it into Firmware update mode.
Of course, I have never really used adb before, except to dabble a bit. So, I am encouraged that I can somehow get into with shell.
I am not unplugging it until I know what to do!
Since then I have been able to turn the phone off and also put it into charging on USB.
This is what worked:
* Hold down power and volume down button until booting stops and phone turns off completely.
When it does shut down, I kept buttons down until it flashes logo again and then shuts down again. Then I let go. Phone is off and when I plugged in the charger it shows charging animation.
Now, after inspecting the bugreport, I noticed a lot of these messages for all the system apps like this one:
"I/PackageManager(21318): Expecting better updatd system app for com.lge.sizech"
I think the cause of all this shralp is this, I did a LG Mobile Support Tool "Upgrade Recovery" and then in Titanium Backup I restored an older backup (incl system apks). At least that makes sense seeing all the "Expecting better apdat system app" messages in the bugreport.
Still not sure what to do next
I tried the very good instructions here:
[Guide] Unroot/Unbrick - flash official factory firmware with LG Launche
http://forum.xda-developers.com/showthread.php?t=2471370
The update succeeded. However, when I rebooted the phone it is in the same boot-loop with message that it was before.
I used the BELL D803B10D_00.kdz file. Now I will try with the earlier version BELL D803BA_00.kdz file.
We will see what happens ...
do you have nandroid backup from previous rom?
I have three backups:
1) Titanium Backup (full)
* This was my first backup performed right after rooting device and installing Titanium Backup.
2) Titanium Backup (full)
* Did this 2 days ago. Device was working OK and did as precaution.
3) ADB BACKUP. I did this one before my Titanium restore.
I restored the first titanium backup and that (ooooppps!) was after I did an LG Firmware update.
ALSO:
I am on Windows 7 64 and although adb works fine, fastboot does not. I understand that might be a problem with windows 7 64.
So, unless anyone objects, I am going to redo on my windows 32 machine and also "fastbook oem unlock".
Since firmware is OK, if I do the fastboot oem unlock, that will wipe everything. But I can still boot and re-setip the phone, right?
Just checking before I fudge everything up here ..
ALSO ALSO:
I had antivirus/theft security installed and I disabled it partway through last restore.
Maybe that has somethng to do with this all .
But I am still cool because I can ADB and also firmware install seems ok.
ADB works and that is the one good sign.
or you can follow ADB Sideload method
http://forum.xda-developers.com/showthread.php?t=2318497
zekurosu said:
or you can follow ADB Sideload method
http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
I don't (didn't) have TWRP installed. How can I sideload without it?
Also, should I adb oem unlock to get it wiped at this point?
I'm having a similar problem on a Bell D803. Just happened very randomly today. I turned my phone off for an exam, then turned it back on after.. initially had no signal and a black background. Settings for factory reset wouldn't work. My phone is rooted and has TWRP. I went into recovery and formatted.
Bootloop.
Bootloop.
Bootloop x 20.
I however, don't get the same two messages. I just keep bootlooping.
Got home, tried to go through download mode to unbrick it, but for some reason my computer isn't picking it up. I have all the drivers, and before this incident, it was recognized.
Any solutions?
I'm thinking of buying an OTG USB and then just flashing a stock zip from recovery. Would that be a possible viable solution?
asdfvtn said:
I'm having a similar problem on a Bell D803. Just happened very randomly today. I turned my phone off for an exam, then turned it back on after.. initially had no signal and a black background. Settings for factory reset wouldn't work. My phone is rooted and has TWRP. I went into recovery and formatted.
Bootloop.
Bootloop.
Bootloop x 20.
I however, don't get the same two messages. I just keep bootlooping.
Got home, tried to go through download mode to unbrick it, but for some reason my computer isn't picking it up. I have all the drivers, and before this incident, it was recognized.
Any solutions?
I'm thinking of buying an OTG USB and then just flashing a stock zip from recovery. Would that be a possible viable solution?
Click to expand...
Click to collapse
Well, I am able to connect with adb fine on my laptop (Win 7 64) but not on my desktop (Win 7 32)
But on my Win 7 64 I cannot get into fastboot.
I am wondering if the driver install on my desktop went foo-bar and needs reinstall. Also, I noticed that the website drivers are more recent USB drivers than some of the ones linked on this site.
I used adb uninstall package for many user packages and it was success. But I still see the packages listed in the bugreport?
For example: I already uninstalled "com.benhirashima.skiplock" and also "com.lookout".
Why? What to do to really zap them for good?
Sorry, I posted the wrong link earlier.
This was the guide I used which succeeded but made no difference to the boot-loop.
LG G2 Stock Firmware (Go Back to Stock)
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=d803
Just figured out how to do a factory reset.
http://www.youtube.com/watch?v=3ogBvzbPikc
The hard reset worked and now I am configuring the phone settings!
So, again, this is what I did:
1) http://forum.xda-developers.com/showthread.php?p=45293512
2) http://www.youtube.com/watch?v=3ogBvzbPikc
Not sure if it all worked but I am setting the phone up as we speak (or as I type)
natureburger said:
Well, I am able to connect with adb fine on my laptop (Win 7 64) but not on my desktop (Win 7 32)
But on my Win 7 64 I cannot get into fastboot.
I am wondering if the driver install on my desktop went foo-bar and needs reinstall. Also, I noticed that the website drivers are more recent USB drivers than some of the ones linked on this site.
Click to expand...
Click to collapse
Hmm that's strange. Unfortunately for me, I'm already on 64-bit and it still isn't picking it up.
ALL FIXED UP
WORKING 110%
:good:
natureburger said:
ALL FIXED UP
WORKING 110%
:good:
Click to expand...
Click to collapse
I have followed this to a t.
Succesfully flashed the stock firmware that came with the phone when sold.
Did hard reset using the the power button and volume down
= phone rebooting every 10 seconds, no wifi, imei = null
adb devices = offline.
Really depressed right now. If anybody can help me I would appreciate it.
zprovo said:
I have followed this to a t.
Succesfully flashed the stock firmware that came with the phone when sold.
Did hard reset using the the power button and volume down
= phone rebooting every 10 seconds, no wifi, imei = null
adb devices = offline.
Really depressed right now. If anybody can help me I would appreciate it.
Click to expand...
Click to collapse
Press the power button down and hold it.
It should turn off, then look like it is turning on, (flash logo very briefly) and then turn off.
Let go of power button and it should stay off.
Do that. Now, does it work to turn off completely?
Let's see if you can do that first.
Then .. do hard reset, exactly like this:
http://www.youtube.com/watch?v=3ogBvzbPikc
Does the hard reset screen show and give you hard reset options?
natureburger said:
Press the power button down and hold it.
It should turn off, then look like it is turning on, (flash logo very briefly) and then turn off.
Let go of power button and it should stay off.
Do that. Now, does it work to turn off completely?
Let's see if you can do that first.
Click to expand...
Click to collapse
Yup. I totally understand what you are saying and have done it many times. I had to use that method to get into download mode and also had to use it to do hard reset.
I just reflashed the phone all over again a second time succesfully.
Reboots every 5 seconds. Keyboard came up for a few seconds for the first time in 48 hours during the initial setup phase. 5 seconds later as I was trying to input a wifi code it would not appear. then it rebooted as usual.
I really appreciate any input right now. :cyclops::crying:
zprovo said:
Yup. I totally understand what you are saying and have done it many times. I had to use that method to get into download mode and also had to use it to do hard reset.
I just reflashed the phone all over again a second time succesfully.
Reboots every 5 seconds. Keyboard came up for a few seconds for the first time in 48 hours during the initial setup phase. 5 seconds later as I was trying to input a wifi code it would not appear. then it rebooted as usual.
I really appreciate any input right now. :cyclops::crying:
Click to expand...
Click to collapse
1) Are you able to completely turn it off using my instructions?
2) When you hard reset (2nd half of this video), http://www.youtube.com/watch?v=3ogBvzbPikc
a) Does the hard reset screen show?
b) Does it give you the hard reset options?
3) Before it was bricked, was it in 'usb debug mode' in developer options?
4) Which kpz version did you restore to?
5) Did your "adb devices" ever work? Did your "adb shell" ever work?
natureburger said:
1) Are you able to completely turn it off using my instructions?
2) When you hard reset (2nd half of this video), http://www.youtube.com/watch?v=3ogBvzbPikc
a) Does the hard reset screen show?
b) Does it give you the hard reset options?
3) Before it was bricked, was it in 'usb debug mode' in developer options?
Click to expand...
Click to collapse
1) Yes absolutely. It is sitting next to me right now doing nothing at all because I turn it off when I am not trying to fix it, otherwise it keeps rebooting relentlessly.
2) a) Yes, same as the video. b) Yes it says the same exact thing as the video. I press power key twice and it begins. The stock recovery android appears with a loading bar on the bottom for ~1 minute then it goes to the boot "lg animation".
3) Yes it was. Before it was bricked I essentially always had it in debug mode because I successfully rooted it and simply left it on debugging mode after having to activate it to root.
4) D801V11B_00.kdz The EXACT same as the original. This is a Videotron (canadian) phone. I can clearly remember without a doubt going into about phone and this is what it was running before all of this happened.
5) I am having a bit of memory strain here, but I do believe it also said adb devices before any of the issues came. It is a good point I will try "adb device" from another trusted computer.
Other notes: I can browse the android os for a few seconds. Sometimes sound does not work, wifi is non functional (even though the keyboard never appears, I managed to have a security free wifi in my proximity and it would not connect (was saying: temporarily avoiding bad signal)) and also I do have modemstat1.img and modemstat2.img backups for EFS.
adb devices consistently shows "offline" but it is definitely recognizing the phone. I have also tried using usb debugging activated and still "offline". Drivers are up to date and all.
The upper drawer in the usual g2 user interface is strange now. it doesnt have anything except for the date (1970 something...) and a "gear" icon for system settings. I am talking the drawer you drag down from the top of the screen.
This phone was working with absolutely no problems 2 days ago.
Thank you so much for looking into this. I have certainly exhausted my repairing capacities. I am entirely dependent upon the knowledgeable individuals in here from here on out.
zprovo said:
1) Yes absolutely. It is sitting next to me right now doing nothing at all because I turn it off when I am not trying to fix it, otherwise it keeps rebooting relentlessly.
2) a) Yes, same as the video. b) Yes it says the same exact thing as the video. I press power key twice and it begins. The stock recovery android appears with a loading bar on the bottom for ~1 minute then it goes to the boot "lg animation".
3) Yes it was. Before it was bricked I essentially always had it in debug mode because I successfully rooted it and simply left it on debugging mode after having to activate it to root.
4) D801V11B_00.kdz The EXACT same as the original. This is a Videotron (canadian) phone. I can clearly remember without a doubt going into about phone and this is what it was running before all of this happened.
5) I am having a bit of memory strain here, but I do believe it also said adb devices before any of the issues came. It is a good point I will try "adb device" from another trusted computer.
Other notes: I can browse the android os for a few seconds. Sometimes sound does not work, wifi is non functional (even though the keyboard never appears, I managed to have a security free wifi in my proximity and it would not connect (was saying: temporarily avoiding bad signal)) and also I do have modemstat1.img and modemstat2.img backups for EFS.
adb devices consistently shows "offline" but it is definitely recognizing the phone. I have also tried using usb debugging activated and still "offline". Drivers are up to date and all.
The upper drawer in the usual g2 user interface is strange now. it doesnt have anything except for the date (1970 something...) and a "gear" icon for system settings. I am talking the drawer you drag down from the top of the screen.
This phone was working with absolutely no problems 2 days ago.
Thank you so much for looking into this. I have certainly exhausted my repairing capacities. I am entirely dependent upon the knowledgeable individuals in here from here on out.
Click to expand...
Click to collapse
Hmmmm..... why your adb devices is not working? But the re-pair works and you can then do hard reset.
But that is good information you shared.
Maybe someone else can chime in.
From my experience:
1) adb usb access seems spotty. My win 7 64 connected fine and it even kept the shell through the reboot cycle. But on my win 7 32 machine it was only detecting device and then not able to shell.
2) I was also able to use from the LG website LG MOBILE SUPPORT TOOLS.
Download the LG MOBILE SUPPORT TOOL
I downloaded the most recent one from the LG website and make sure to select your options >> country and then the correct phone model at the upper right hand corner of the tool.
Then install USB driver for correct phone model.
Then see if USB works, "adb device" should return the device code.
"adb shell" should show the shell prompt.
3) There is always fastboot. But I an noob and know 0% about how to properly connect and use it.
Some others please chime in and help this droid bro!