Database Users

Can not boot or reflash HTC Magic 32A after flashing Rogers 2.1 over CM froyo (1.33.)

Hi
I have the following problem:
I've tested FroyoRedux Mod v1.9.5 with the requested radio and hboot. After that I've tried to install the original stock ROGERS 2.1 ROM. Now, the problems appeared. somehow I'm stack with the
1.76.0010 hboot, with security ON
Radio 3.22.20.17 (which should be 6.35.xx.xx) after flashing (don't ask why the update didn't take place because there was no error)
and the phone hangs at the ROGERS screen (just before start loading android).
I've tried reflash SAPPIMG from flashboot but it detects is already there and won't flash. I can not use fastboot from computer because security is ON, i don't have recovery installed because ROGERS rom took it away.
Any ideas on how I can fix this mess?
UPDATE: After reading tons of forum pots, seems I have found the source of the problem and seems that became a common issue: I've installed Rogers 2.1 manually over CM custom ROM with froyo (SPL 1.33.xxxx and RADIO 3.22.xx.xx) without knowing that Rogers will not update both RADIO and SPL.
Now all of us who did this need a solution. Anyone has an ideea?
Thanks

how did u install the rogers 2.1?
from the RUU?
u have a rogers magic+ phone?

blizard80 said:
how did u install the rogers 2.1?
from the RUU?
u have a rogers magic+ phone?
Click to expand...
Click to collapse
Hi, Yes, I've instaled Rogers 2.1 but not from RUU but from fastboot with SAPPIMG.zip

and u installed hboot from the ruu?
i think u must make a gold card... but wait for the experts

When I've installed the SAPPIMG using a goldcard, it automatically overwiten hboot, recovery and radio.
BTW: if I've formatted the goldcard, how can I create a new one now that i don't have a linux pc and i can only enter fastboot.
Thanks

Why did you post this in Development?
I'll move it to General... but I fail to see how this is development related.

Binary100100 said:
Why did you post this in Development?
I'll move it to General... but I fail to see how this is development related.
Click to expand...
Click to collapse
sorry, i was reading in development and post the thread here from mistake

any solution please?

Now I can access teh memoy card again. Please give me a solution using RUU. Maybe a valid RUU which works on all devices because when I've tried to flash a RUU it sais whong RUU version and I must get another one.

No one can help?

http://rapidshare.com/files/421772202/SAPPIMG.nbh
Try flashing the above.... using a goldcard and from fastboot/hboot.

Thank you for answering
I will try now

I've tried it but it say "Main Version is older". Can you tell me how can I fix that or how to make a SAPPIMG.nbh file with Rogers update or even android 2.2. Or do you have such thing?
Thanks a lot.

Anyone with a solution please !?!?

Got your PM... normally i don't respond help request over pm, but i'll make an exception.
You need to redo your goldcard... all the errors you get points to a faulty goldcard.
You can post/pm the cid nr you get from the htc device + the reverse nr. you used to make the goldcard... then i can verify that you have done it correctly.
You should have made it work with the sappimg.img i have provided earlier....
All points to a bad made goldcard!

Thanks so much for your reply.
So, Let's get started . My SD CID is
035344535530324780109ac8ee0093aa
After using http://hexrev.soaa.me/
My reversed CID is
009300eec89a10804732305553445303
(first two zeros already present)
Now, I've used this code here http://psas.revskills.de/?q=goldcard
and get the goldcard in the attachment.
Can you check please?
Thanks a lot

Well all ok from here.
The only thing left is how you made the hex-changes to the goldcard...
Which guide did you follow?
Read your pm!

i have exactely the same problem so when you get the solution can post it please !!!

Sure I will

Try this...
http://rapidshare.com/files/424005789/sappimg.zip
Put it on the goldcard and reboot by holding volume_down + power.
Then let it work...
Make sure there is nothing else on the goldcard!
Do not rename or anything.
This sappimg.zip is the new rogers 2.1 update... it should work :0)
Please report back :0)

[Q] Getting Wildfire to Diag Mode Without PC49Diag.nbh

Is there a way we get into daig mode without the pc49diag.nbh file so that we can clear the security flag?
Its just a idea i have and a question.
I found a pc49diag.zip file but that was a rom.zip renamed and it booted from hboot without the use of a goldcard. As with the gold card it wouldn't even load the files.
Idea being if we can get diag mode just like how the XTC Rebel clip does then it might be a better way without the £150+ price tag if its for one phone.

Hi,
Please format your SD and uncompress from the zip attached.
Boot with power+volume down, after a few seconds it will "jump into DIAG" and boot the P49diag.nbh, select power, it will fail, press the dial, it will say "Waiting for Radio Ready" then you can clean S58 Data (I guess simlock and S flag).
Now this works on my device but it may not work on yours. Then PC49diag.nbh seems to be signed, it may have been leaked from HTC. If it was created by XTC Clip in a device specific way then the HTC private signing keys were leaked as well, doubtful but who knows.
Let me know how it works out for you.

Sorry, forgot the attachment. Here it is.

I tried this with the XTC clip version and it didn't clear any flags just error att'd! will try though!

hacktrix2006 said:
I tried this with the XTC clip version and it didn't clear any flags just error att'd! will try though!
Click to expand...
Click to collapse
Thanks for the info. It's wierd that the XTC Clip didn't work on your Buzz. What error message did you get exactly? Did you get to the "Waiting for the Radio" message?

no the XTC Clip worked but the diag file will not work without the clip or it shouldn't i just ran the file without the clip and it just removed S-On which is strange.
So here is the question where did you get the file from if its from the XTC clip then you might get some stick for releasing that file out.

hacktrix2006 said:
no the XTC Clip worked but the diag file will not work without the clip or it shouldn't i just ran the file without the clip and it just removed S-On which is strange.
So here is the question where did you get the file from if its from the XTC clip then you might get some stick for releasing that file out.
Click to expand...
Click to collapse
Hi,
Thanks, what do you mean by "removed S-On"? Did you get to the "clean S58 data" menu? Was your phone S-OFF and did you switch to S-ON?
If you managed to get to the menu without the fake SIM attached, then no SIM vulnerability is being exploited and this is just the engineering bootloader being loaded, and somehow it has access to DIAG mode on the radio and can modify NVRAM. Which shouldn't normally happen without some kind of signature verification, in which case either HTC (or Qualcomm?!) screwed up, or their signing keys got leaked.

It's about time someone had the balls to release this file.
Didn't work for me personally (well it booted into diag mode but S-off failed with a timeout).
However I did gain some useful info for my own project I've been working on.
Thank you very much, have searched high and low for this.
TOP MARKS TO THIS MAN.
P.S anybody know anything about cold boot flags?

When you say press the dial, what do you actually mean.
Sent from my HTC Wildfire using XDA App

it was S-On but on Hboot 0.80 so not sure fully.

well I tried it and yes I could get into diag mode and go all the way to the end but I got an error and could not get rid of s-on. Maybe there is something else we need to add. Did anybody try to flash a custom rom with an older hboot when in the diag mode?
Sent from my HTC Wildfire using XDA App

thearif said:
well I tried it and yes I could get into diag mode and go all the way to the end but I got an error and could not get rid of s-on. Maybe there is something else we need to add. Did anybody try to flash a custom rom with an older hboot when in the diag mode?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Could you please tell us how to get into diag mode?
Which hboot version do you have?
s-on?
2.1?
build num version?
thanks!

nwpmikey: The thingy at the bottom, looks like a circle.
And please don't thank me, thank whoever leaked the file from HTC. I merely posted it whatever was on my SD card.
Other people who used the XTC Clip: please post your PC49DIAG.nbh here so we can compare the difference (if any).
My HBOOT in an old one, from May 2010, afaik. It may have been downgraded by unrevoked3. Version 08.0002 iirc. Not changed by the switch to S-OFF, of course.

I'm trying to use the file on hboot 1.01.0001/S-ON/Stock 2.2.1(2.22.405.1 WWE) and it does not work (wrong image error).
Any ideas?

alvaritolalala said:
I'm trying to use the file on hboot 1.01.0001/S-ON/Stock 2.2.1(2.22.405.1 WWE) and it does not work (wrong image error).
Any ideas?
Click to expand...
Click to collapse
Hey,
Thanks to everyone for trying it. The PC49DIAG.nbh must be customized by the XTC Clip in some way, so that it becomes device-specific and will not work on other devices. Since it *seems* to be signed, this could mean that HTC's private signing key leaked and are somewhere inside the XTC Clip itself. So making a software version of the XTC Clip will be a matter of extracting the keys or whatever firmware is inside the clip.
If someone else who turned their wildfire to S-OFF could post their PC49DIAG.nbh, that would be very helpful. It may not give the solution immediately, I guess we'd need to investigate more. Also "rtask C" (aka talk to the radio) looks like a promising path, but I couldn't get it working yet.

I've found a file called pc49diag.rar on a chinese forum but I cannot register to download it.
www.sjwxzy.com/read-htm-tid-254578-page-e-fpage-1.html
and the link for the file...
http://www.sjwxzy.com/down.php?aid=718464
perhaps it's the same thing we have... I can't test it.
Also the author of the post says:
"HTCA3366 Wildfire phone factory test card program PC49diag"
Click to expand...
Click to collapse
and just that...

Thanks for the link.
I also found http://www.mediafire.com/?i09yp4r7odhlzws (PC49IMG.zip)
Despite the name, it lacks the nbh file -- just a recovery (and the zip is not signed, obviously you can't flash it since you're S-ON).
I found another link, PC49diag.zip 128MB file but it's actuelly just another stock ROM. This one is signed, but DO NOT FLASH IT, it will update everything (radio, recovery, hboot etc.).

xdbg said:
Thanks for the link.
I also found http://www.mediafire.com/?i09yp4r7odhlzws (PC49IMG.zip)
Despite the name, it lacks the nbh file -- just a recovery (and the zip is not signed, obviously you can't flash it since you're S-ON).
I found another link, PC49diag.zip 128MB file but it's actuelly just another stock ROM. This one is signed, but DO NOT FLASH IT, it will update everything (radio, recovery, hboot etc.).
Click to expand...
Click to collapse
I've tested almost every pc49...zip on the internet except the one I told you before and all of them are missing the nbh or they are rom files
No nbh from xtc-clip yet?

alvaritolalala said:
Could you please tell us how to get into diag mode?
Which hboot version do you have?
s-on?
2.1?
build num version?
thanks!
Click to expand...
Click to collapse
I have 2.2.1 with hboot 1.01.0001 S-ON and built number 2.22.405.1
With the file supplied in here, I can get into the diag mode and by hitting the action key get to the clean S58 Data screen. But when I tried to clean the data, it threw an error and could not S-OFF the device.
UPDATE: I made a goldcard, and tried the procedure again. But this time I could not get into the DIAG mode at all.. So if you have a goldcard in your SD slot, that maybe the reason for not working in your case.

thearif said:
I have 2.2.1 with hboot 1.01.0001 S-ON and built number 2.22.405.1
With the file supplied in here, I can get into the diag mode and by hitting the action key get to the clean S58 Data screen. But when I tried to clean the data, it threw an error and could not S-OFF the device.
UPDATE: I made a goldcard, and tried the procedure again. But this time I could not get into the DIAG mode at all.. So if you have a goldcard in your SD slot, that maybe the reason for not working in your case.
Click to expand...
Click to collapse
Hi,
Thanks for trying this. A couple question:
- could you write down the exact error message after you ran clean S58 data?
- can you try the "Device Info" menu? Does it work?
- can you try the Flash menu (power button before it waits for the radio) with an unsigned update.zip on your SD? For example the one that flashes a recovery (see mediafire link above)

About wildfire rooting (gold card)

hey guys.
after few hour-s in google i've found that you don't really need xtc clip to generate gold card .
few links :
link1
link2
i'll try these out in few days and let you know , that is it working.....

hani93 said:
hey guys.
after few hour-s in google i've found that you don't really need xtc clip to generate gold card .
few links :
link1
link2
i'll try these out in few days and let you know , that is it working.....
Click to expand...
Click to collapse
Yeah, it is known. The fact why is now important the XTC Clip is not for doing gold card. It is important because it is needed to unlock the upgraded 1.01.xxx hboot of the Froyo 2.2 HTC official update, which made Wildfire unrootable if you upgraded or recently bought the phone.

but, if i flash recovery with PC49IMG with goldcard and then flash Safe Buzz_Froyo_HTC_WWE_2.22.405.1 Rooted.zip ?
does it turn hboot to s-off or not? this is my question
edit: or if i flash pc49diag ..

hani93 said:
but, if i flash Safe Buzz_Froyo_HTC_WWE_2.22.405.1 Rooted.zip and PC49IMG with goldcard ?
does it turn hboot to s-off or not? this is my question
Click to expand...
Click to collapse
Everything has been already tried. And the answer is no. This Safe Buzz_Froyo_HTC_WWE_2.22.405.1 Rooted.zip is the ROM extracted from the RUU, but the hboot has been deleted so it is not upgraded. Nothing else, it doesn't change the hboot.
With hboot 1.01.xxx you won't be able to do anything that touches the hboot, not even with GoldCard.

ok, thanks for help
but, i've just have 1 question too then how alpharev makes it work ?

hani93 said:
but, if i flash recovery with PC49IMG with goldcard..
Click to expand...
Click to collapse
S-ON checks the signature of the files to be updated.
It is not possible to flash a custom recovery through pc49img process when on S-ON. And gold card cannot skip the signature check. Gold card is just useful for carrier locked phones.
hani93 said:
but, i've just have 1 question too then how alpharev makes it work ?
Click to expand...
Click to collapse
Alpharev won't actually turn off the secure flag in the radio NVRAM like xtc clip does. Alpharev overwrites the stock hboot with a patched hboot to make the hboot think that the secure flag is off. So, it will not actually target the secure flag (which is not located on the hboot)

Can anyone explain to me understandably why should we make gold card , what is it for? My english is very bad so when I googled it, I couldn't understand what is it for

mtnhan1996 said:
Can anyone explain to me understandably why should we make gold card , what is it for? My english is very bad so when I googled it, I couldn't understand what is it for
Click to expand...
Click to collapse
GoldCard is a special SD card which, when inserted into your device, allows you to flash RUU files with a different CID to your own device. For example, if you own a T-Mobile branded device, this will allow you to flash a generic ROM.

And little more clearly.
Special sdcard means u donot need to buy a new sdcard. Gold card is an sdcard patched with a 1 KB file specific to ur device. And that specific file depends on ur device serial number. And some reported that the gold card made with the stock sdcard on wildfire will not work.
Correct me if I'm wrong...
Sent from my HTC Wildfire using XDA App

I've changed my upgraded rom from latino stock another using the same sandisk card that came with.. so it can be done..

thanks guys

I`ve pushed things a little further on Hboot 0.80
After some research i realized that the desire had the same or similar hboot
dloaded - r6-desire-root-alt.zip from modaca
ran it over my wildfire ,it looked like it was going to work untill it hit the check for phone type
probably not smart but it did not kill my phone
anyone know or have the talent to swap files out to get to the next step?
edit
ive dropped jokerdroid4.1 into the desire hack
rename to update and about to hit start
Stop me fast if this is a bad idea = also have the gold card in this time

[GUIDE]complete detailed guide to downgrade from 2.37 to 1.32

hi guys
yesterday i have successfully downgraded my dhd indian version from 2.37 to 1.32
i created and saved my own notes for furture reference by collecting from various posts
i am uploading those tutorial and also tools required
all the source links and links to roms are in the text files
no need to thank me
if u want to give credits thank "roy_hui" , "CuBz90" ,"jkoljo" becuase my notes are clubbed from their posts
source:
http://forum.xda-developers.com/showpost.php?p=10428927&postcount=1
http://forum.xda-developers.com/showpost.php?p=15290453&postcount=1828
http://forum.xda-developers.com/showpost.php?p=15274987&postcount=8
next to root and flash custom rom best guide is in this post
http://forum.xda-developers.com/showthread.php?p=11557769
thank you every dev who are working very hard
VERSION WHICH ARE CONFIRMED AS DOWGRADED USING THIS PROCESS
2.37.720.3-DHD INDIAN VERSION

how about 2.42?

Do we need to make a gold card for unlocked and un branded DHD too.
I have an unlocked unbranded indian DHD.
Pls reply

I ve unbranded dhd with s-off running gb build 2.37.
do I need to make goldcard ?
mechanical engineer

zdwyww said:
how about 2.42?
Click to expand...
Click to collapse
i dont have 2.42 version in my phone mate
so i am not sure
but try it once nothing to loose
just make a gold card as said in file attached using some spare microsd
after making goldcard u can again use u r microsd normally
so just make a gold card and copy the rom into the sd root
if the rom is flashed then every thing is fine
if doesnt work u will recieve a notification called
"update failed
"CID incorrect"

ckranjan said:
Do we need to make a gold card for unlocked and un branded DHD too.
I have an unlocked unbranded indian DHD.
Pls reply
Click to expand...
Click to collapse
mine is also same unlocked and unbraded indian DHD
BUT had aN error "update failed" and "incorrect CID" PREVIOUSLY
so to be on safe side and not wasting time create a gold card it just takes 5 min most

gagan01 said:
I ve unbranded dhd with s-off running gb build 2.37.
do I need to make goldcard ?
mechanical engineer
Click to expand...
Click to collapse
i think there is no need all this procedure for u because u r already s-off
try once gingerbreak app to root
if it doest work
then follow this procedure

thanks
THanks foir the help

Stinger696 said:
THanks foir the help
Click to expand...
Click to collapse
you r welcome
by the way please post u r stock version so people can know which all can be downgraded

Thanks karthik
Full guide now here
http://forum.xda-developers.com/showthread.php?t=1152233

I used gingerbreak it didn't worked
mechanical engineer

gagan01 said:
I used gingerbreak it didn't worked
mechanical engineer
Click to expand...
Click to collapse
then download those text files and tools folder in the attachements and follow that

can someone please help?
i'm stuck in the beginning itself.
whenever i try to put the Downgrade_v2.zip in C:\ drive it gives an "Error 0x80070522 : A required privilege is not held by the client."
so i'm not able to put the Downgrade_v2.zip in C:\ drive.
Is there any other way to use cmd.exe to locate the Downgrade_v2.zip file as cmd.exe doesn't recognise the downgrade file at any other place on computer.
plz help !!! its urgent !!!
edited...
i guess i did it from the desktop itself.
no need to put the file in C:\ drive

try your desk top folder. then when extracting just make sure you know where to find the files.

Help !!!plz its urgent. !!!
i am using root manager for the first time.
i successfully downgraded my desire hd. installed visionary and did the permanent root.
did the radio S-OFF successfully.
tried the Eng S-off but failed.rebooted the phone.
i checked it with root checker application and it showed that i have rooted my phone.
i installed rom manager and flashed clockmod recovery successfully.
now i put my leedroid rom on the sd card and press "reboot in recovery" in rom manager.
my desire hd boots up and what i get is a phone icon with a red triangle with a red exclamation mark on it .
i removed the battery and restarted my phone.
this time i press the power and volume down button.
i go down to recovery mode and click it on the bootloader screen.
again the same phone icon with a red triangle with a red exclamation mark.
no button works and i have to remove battery again.
What should i do now ???
i'm totally stuck.

your CWM Recovery didn't flash successfully. Next time don't pull your battery press volume down and hold then press power button. it will show you a menu that allows you to reboot your DHD.
Try to reboot your DHD holding the volume down button until the boot loader appears. chech that the first line has something that says
ENG S-OFF or in my case the whole line was
ACE PVT SHIP S-OFF RL
then reboot the phone and flash recovery I believe you have to have Radio S-OFF to be able to flash recovery.
did you use the one-click easy S-OFF and one-click Radio S-OFF tool. if not try to search for this in the forums. I believe they are by jkoljo. This worked for me like a charm. happy ROM-ming.

I rooted DHD any shiprom. No need to downgrade...

I think u flashed successfully the cwm.. why do u want to install custom Rom by traditional method just go to Rom manager from there download ur Rom and click on it.. Rom manager ll do the job for u ... K.I.S.S.
mechanical engineer

Root DHD with any RUU Shiprom: http://forum.xda-developers.com/showthread.php?t=1155206

gagan01 said:
I think u flashed successfully the cwm.. why do u want to install custom Rom by traditional method just go to Rom manager from there download ur Rom and click on it.. Rom manager ll do the job for u ... K.I.S.S.
mechanical engineer
Click to expand...
Click to collapse
CWM has a different logo I think it is/was an android guy on a skateboard. whereas stock recovery is a triangle with exclamation point inside. So it means something went wrong when he flashed his CWM and would lead me to believe that his S-OFF process went awry. So checking S-OFF is easy. Reboot to bootloader and the info is on the first line.
Cheers

Not rooted Wildfire stuck in bootloop - need help

I got my sisters Wildfire here and it's stuck in a bootloop.
It is NOT rooted, has no S-Off and so on.
It has the stock rom.
It didn't run fluently, so I just rebooted it. But since then it doesn't boot.
Tried taking out battery, putting it back in, no success.
Tried taking out SD-Card. no success.
Then I booted into Bootloader (Vol + Power down).
Buzz PVT Ship S-ON
HBOOT-1.01.0001
MICROP-0622
TOUCH PANEL-ATMELCO 3_16ac
RADIO-3.35.20.10
All I get to choose is Fastboot, Recovery, Clear storage and Sim-lock.
Recovery turns out to be nothing, I can't get to it. Might be, because there is no CWM on it.
I was lucky to be able to root and s-off my DHD, so I don't have any idea, how to fix this problem with the Wildfire.
Any suggestions how to solve this little problem?
Thanks in advance

Which method u adopted for rooting....try revolutionary method and u will be s-on....bt ur mobile doesn't on....try to intall ruu which can be downloaded from shipped-roms.com,download wwe version file....run it,it will install stock rom again,then enable debugging mode,goto revolutionary.io fill the form and copy generated alphanumeric code carefully and download the file run it and u will get s-on....
Sent from my HTC Wildfire using XDA App

Thanks, but actually I neither want root nor s-off on it...I just want to get this smartphone to boot again...I'll try to get the RUU on it, like you suggested
Sent from my Desire HD using Tapatalk

Would "RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_s
igned.exe" be the right one?
And if, what to do next with it?
Thanks in advance

- Extract the Rom.zip from the RUU you listed. Procedure here:
http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
- Rename this zip to PC49IMG.zip
- Place this on the root of the sd card
- Reboot in HBoot mode, the phone will detect the file and will attempt to install. Select Yes and let it proceed.

Thanks, I'll do that when I'm done in University :-D
Just so I have more opportunities in case this happens again.
Could you give me a link to a instruction how to root and s-off?
This would help
And, just in case, which do you think is the best Custom Rom for the Wildfire?

You can use Revolutionary to get S-OFF and Clockworkmod Recovery. Guide here:
http://joel5121.blogspot.com/2011/06/wildfire-22-root-tutorial.html
The only thing that has changed is AlphaRev's Website. The new address is revolutionary.io. Everything else remains the same. Although, you will need a booting device to get it to work.
Lastly, ROM choice depends on whether one would like to keep HTC Sense or not. If not, then I would go with Cyanogenmod / Oxygen (Two ROMs I am pretty sure are available for the DHD as well). And, if you would like to keep HTC Sense, then the current favorites are DK Custom ROM and RemPuzzleROM.
Complete Listing available in the Index Thread linked in my Sig.
Good Luck

I only want to flash a ROM on the Wildfire. My dhd runs on arhd and I won't change that well, unless there's a newer version of arhd
Anyways, what is the best sense ROM
for the Wildfire? Should run smooth but stable and fast. And of course it should've good battery life
Sent from my refrigerator using Tapatalk

I'm stuck myself. Wildfire is working again, but neither can I root nor can I make S-OFF.
On AlphaRevX it "sends in Caroline" and "Caroline" comes out with an error report
However, USB-Debugging was turned on, SD Card active, connected to pc, but "only charge"...
That far for S-Off...
Then I'm trying unrevoked. Works so far, until the Wildifre is in the bootloader. Unrevoked tells me, it's waiting for bootloader. When I choose Fastboot on the device, unrevoked works on and tells me "Waiting for HBOOT to be ready..."
Nothing happens after that. If I choose Bootloader on the device, unrevoked tells me, that it has lost connection to the phone.
Then I tried Gingerbreak. Gingerbreak works, reboots the phone, I check for SU and can't find it. So I guess it's not rooted then :-/
Any suggestions?

Your only (free) option is Revolutionary on Wildfire's with official 2.2.1 and HBoot 1.01.x. Any other method (Unrevoked, Gingerbreak, SuperOneClick etc) will not work and will result in failure. Errors on Revolutionary can usually be treated EXCEPT when it says "Not writing bad block at mtd 0x00000", in which case, there are bad blocks on the NAND memory, and there is no fix yet.
The paid option is to find a store with an XTC Clip hardware box, which can S-OFF the Wildfire as well. They will charge you a 1-time fee for using it.

3xeno said:
Your only (free) option is Revolutionary on Wildfire's with official 2.2.1 and HBoot 1.01.x. Any other method (Unrevoked, Gingerbreak, SuperOneClick etc) will not work and will result in failure. Errors on Revolutionary can usually be treated EXCEPT when it says "Not writing bad block at mtd 0x00000", in which case, there are bad blocks on the NAND memory, and there is no fix yet.
The paid option is to find a store with an XTC Clip hardware box, which can S-OFF the Wildfire as well. They will charge you a 1-time fee for using it.
Click to expand...
Click to collapse
So since this is exactly the fault that is displayed, there is nothing I can do...
But this other tool for s-off ain't working either. If I'd have at least s-off...in this tutorials I first make s-off and afterwards there is a zip archive which will give me SU. Can I install cwm without Root? I'd really like to flash cyanogen...
Sent from my refrigerator using Tapatalk

No, unfortunately, as I stated in my previous post, you cannot.

The best option will be revolutionary but solve ur first problem and then move on to this...we r always here....
Sent from my HTC Wildfire using XDA App