Database Users

I need help to repair my Qtek

Hello
I just did the following :
download the files from www.carrierdevices.com.au for Qtek 101 update
"Qtek 1010 Upgrade
(22102003-190723)-RSUv1.15_(GPRS_T32500_ENG).exe
File Contents
• CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
• Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
"
When the process began there was an error asking to press OK for restart.
After restarting device in the boot sequence ( when logo is diplayed) there are no informations about the ROM. Just Radion version is diplayed and that is the new version one (3.25)
Also on the display there is no start icon and I cannot use the display because it seems to be decalibrated completly.
Very Important : When I try to connect to Activesync after a while it telling me that the device is not a smartphone or a pocket PC and cannot be connected. So I cant use any program to try to upgrade again.
What to do ?
Please try to give examples and link to download files in order to fix my device.
Thanks in advance
Silviu C.

Hi ...
If you still can get to the boot loader screen (power button + soft reset) and it displays "GSM OK", that means there is a good chance that the flash ROM is not damaged.
You can either put the ROM and RSU files on SD card through a card reader (.nbf files) or to get a valid SD backup for CE + Radio from any working XDA and use the boot loader screen to flash your device again.
Good luck ...

thanks, where I can get some files?
Thank you for your replay,
It seems to be ok cause i can upload a new CE in SD format to the device. ROM was build in the kithcenROM from yorch.net.
It still not working cause perhaps I need the file containing Radio and CE as well in SD format.
Do you know where I can get it ?
I dont think I can get another device to read the files on the SD.
Many thanks,
Silviu C.

I 'm not sure which stage you are stuck with now ... if you can put CE image on SD card and flash it using the boot loader, that means you can boot your XDA and flash the RSU through a normal EXE file from yorch.net .... if this is not the case then you most propably have the wrong file format on the SD card.
Give more details plz

present situation
I am at the edge of disperation.
Steps of what I did :
1. Back up Boot and CE to SD and save them to HDD.
2. Build a CE from Yorch.net in nb1 format and write it to SD with an adaptor.
3. Flash the device with that specific file ( was just CE , not including bootloader)
Now, my pocket is like that:
It cannot been powered from the power button
It start when plug in the charger
I cannot go in bootstrap mode ( when procedure for activating is made I just got a small red flash from the LED)
I have to mention that I choose from the yorch options :" lock butons except power when the device is turned off "
So, now I cannot use the SD for try another flash image.
I cannot use activesync because it cannot recognize the device. Somthing is wrong in the header of the authorising string or something like that.
When I plug the USB cable, activesync is starting but after 10 secs a pop up telling me that the device cannot be recognize, it is not a smartphone or pocket pc.
I am stack.
Thank you
Silviu C.

another question
I have another question:
Is there anywhere - in situation that the problem with boostrap will be solved somehow - full flash containing both radio and CE ?
Thank you,
Silviu C.

some little success
I have suceded by entering in bootrap mode !!
It telling me that I have GSM ERROR
What to do?
IS there any way I can get a full flash for Qtek with radio and OS as well?
Thanks,
Silviu C.

In the boot loader screen, try to press the calendar button ... it should give you the GSM menu. Select "Reset" or "Turn off" and do a soft reset
Plz do NOT try band switching or "Calib/debug"!

It sounds like a failed radio stack upgrade, you can try copying the RSUpgrade.sa.CAB file to your SD card then run it from there.
You can get the RSUpgrade.sa.CAB file by using WinZip to extract it from the RSUv1.15_(GPRS_T32500_ENG)[1].exe file.
HTH

Error 260 on SVP M3100 HERM100

Hi, I hope someone out there can shed some light onto this problem. This is what I have: Orange SVP M3100; Operator: 14.123.1.614; ROM Ver.: 1.23.61.4; ROM Date: 07/13/06; Radio Ver.: 1.06.00.00; Protocol Ver.: 32.37.7010.01H.
I've downloaded and successfully (I think) flashed Hard-SPL-V7.
Bootloader used to read: HERM100; IPL-1.01; SPL-1.04.
Bootloader now reads: HERM100; IPL-1.04; HERM100; SPL-210.Olipro.
The phone still works and syncs. properly, but when I try running SPV_M3100ROMUpdate_0407, it eventually returns Error 260 (Update utility cannot connect to your PDA Phone.) This happens in Vista Ultimate and in XP Pro.
The program will go as fare as identifying the current image as Ver.: 1.23.61.4 and suggests to replace it with image Ver.: 2.11.61.1 however, when I click on OK, it puts the phone into Bootloader mode, disconnects the USB connection and unable to reconnect again. After this I have to do a soft reset and everything goes back to normal.
I'd very much appreciate any ideas to help me get around this conundrum. Many thanks.

put device into bootloader and try flashing from there, otherwise try sd card

OK, I could not flash from Bootloader either; same error message.
Extracted the SVP_M3100ROMUpdate_0407.exe onto the SD card.
Ended up with the following files: EnterBL.exe; GetDeviceData.exe; README.doc; ROMUpdateUt.exe; RUU.dll; RUUUI.dll; RUU_signed.nbh.
None of the above files will run on the PDA. What do I do next? Sorry for being such a novice and thanks again.

commnet said:
None of the above files will run on the PDA. What do I do next? Sorry for being such a novice and thanks again.
Click to expand...
Click to collapse
Correct, the files are not run from the device.
The hermes wiki has the directions for flashing from an SD card, go check it out.

Thanks for that jdc. I found the information you have suggested and here is what I did so fare:
-Formatted the SD card.
-Renamed the ROM image file to HERMING.nbh
-Inserted the SD card with the renamed image file into the phone.
-Restarted the phone and confirmed that it was reading from the card.
-Put the phone into Bootloader mode by pressing PWR+OK+Reset.
The multi-colour Bootloader screen comes up and nothing else happens. I'd tried pressing the PWR button just in case, but it had no effect.
Any more ideas? THANKS!

SPV m3100 upgrade - error 260 - connection drops when allowing enterBL.exe to run on
Hi - am going through the same process to upgrade my SPV m3100.
I've followed Mr Vanx's guides to the letter - ROM update from 1.23.61.4 to Hard-SPL-2.1 - as soon as i click 'yes' on the phone to allow enter.BL.exe to run - the connection between phone and laptop immediately drops.
I've tried using different USB ports as suggested in different threads = but to no avail
Am running Vista Home Premium.
I'm a novice so sorry for sounding stupid - any help would be really appreciated.

I had the same error until I disabled the phone lock. Worked ok after that

I had this problem for awhile, and I'm using Vista. I can't remember the problem to explain it, but I did one of 3 things to fix it.
1. Follow Mr Vanx's Vista Guide. The most important part is downloading his attached drivers and getting Vista to detect your phone as an "HTC USB Device" or "HTC USB Sync" or something like that.
2. Then I would recommend installing the official ATT Rom, you can download it off of HTC's website.
3. Install Schaps Advanced Config cab, and disable "security warnings"
After this done, you should be able to install a cooked rom from here.

Htc 0300 in tri colour

I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated

Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions

i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp

Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1

i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...

Also, what did you do to get your phone stuck in bootloader in the first place?

my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x

Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls

i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.

Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe

i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%

Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.

Will try now and keep u updated
manny thanks x

Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck

Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.

Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom

Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!

i don't have a working pda to use :-( the only pda i have is my bricked one :-(

buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.

[Q] Issue with Radio Firmware Update.

Specs-
OS:
5.2.21892 (21892.5.0.89)
Manila Version:
2.5.20121412.2
Rom Version:
2.13.531.1 (90963) WWE
Radio Version:
2.10.50.26
Running the HD2 from Tmobile (578mb).
Issues-
When I run Leo_CustomRUU with the radio firmware (Eugenia Project - HTC HD2 Radio ROM - 2.12.50.02_2) renamed to RUU_Signed.nbh - it goes through all the prompts and it will eventually stop with an error message about communication errors with usb.
I tried several ports and even hooked up an older system to make sure it was not my rig. The usb on both machines works fine with activesync or as as mass storage device perfectly.
I was able to flash with HardSPL3 without a problem (got the We hacked it screen).
Yet, when I tried to flash the radio it gives me that communication error. If it helps I also get a similar error when trying to flash the room (I tried Energy.Leo.21679.Sense2.5.Cookie.DinikGlass.Sep.24).
Why am I trying to flash the radio firmware? My ultimate goal is to run Froyo. I have copied to the Android folder on my SD card a version (despite my best efforts to be specific on all other aspects, it escapes me the version I am running. I know it is froyo, I just do not recall the builder or version) and I am getting the dreaded robotic voices when I try to make or receive a call. So, rather than troubleshoot my android rom, I am looking to downgrade the radio and see if that solves it as from the pages I have read this seems a likely culprit.
I thank all in advance.
Update:
I found out that using HSPL3_PKG had not put my phone back to 2.08HSPL as it said.. it was still at 2.10. So, I tried highlighting the 2.08 regular, and it did go down to it. Yet, after trying three more times, it is not taking the 2.08HSPL. Anyone have any ideas?
Fixed:
Fourth time is the charm? Works now though.

Did you make sure you have an ActiveSync connection before trying to flash anything?

Dr.Jekyll,
Yes. When I connect the USB it asks for which way I wish to initialize it, I choose ActiveSync. That program starts up, syncs and stays green in the system tray.
I then double click on the Leo_CustomRUU program and click through the steps, the HD2 goes to the HTC with the progress bar as well as the program's progress bar.
It just sits there and does nothing. After about six to eight minutes, it will just speak of a communication problem and error out.
I do not know if this matters, but I am running XP Pro SP3 and ActiveSync 4.5.

Hi,
Why not flash from SD?
1. Rename the .nbh to LEOIMG.nbh
2. Copy to root of sd card
3. Shutdown device
4. Hold vol down and power
5. Follow the introductions
6. Press power button to flash rom
As taken from http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=615095
I seldom flash through ActiveSync WMDC, always from Storage card.
Cheers,
/Cacti

Htc hd2 spl-3.03.0000

Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.

ibrahim-windeck said:
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
Click to expand...
Click to collapse
SPL 3.03 isn't compatible with HSPL sir.
But you can run Android on your Stock Rom 3.14!

Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2

somaking said:
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
Click to expand...
Click to collapse
Hi, I am a complete n00b at this but I have spl 3.03.0000 as well on my HD2 and I want to run android with sense - considering the FroyoStone Sense v3.2 like you have.
Before anyone completely grills me... I've done my research and downloaded everything I needed up until I came across a few posts on xda about not needing HSPL3 and radios etc if I had spl 3.03 on my phone because Android can run on spl 3.03.
I came across this post and didn't want to miss the opportunity to ask. So my question is, do I still proceed with flashing HSPL3, installing a radio, flashing a custom WinMo rom (ie. Energy's rom), format sd card and putting Android on it, then do the CLRCAD and haret to run Android?
Or (correct me if I'm wrong), can I simply format my sd card and put Android on it and do the CLRCAD and haret in order to run Android, without doing anything to my phone?
I do appologize for being long winded, it seems like we both have the same spl 3.03 and want to use FroyoStone Sense v3.2, and since you got it to work, I wanted to know how you did it.
Any help would be must appreciated,
Cheers!!

When you have SPL 3.03 on your device, don't tray to install HSPL. installing HSPL over SPL 3.03 isn't possible.
and installing a SPL 3.03 ROM over HSPL will limit your program memory to +/- 50Mb. (except on T-mous devices)
Android is compatible with latest stock ROM (SPL 3.93 / Radio 2.15)
If you have robotic voice, try to change the Kernel version.
You don't need to do something special on your device in this condition. Just format your SD card and put Android on it, and run the CLRCAD and haret in order to run Android.

Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/

Creativus said:
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Click to expand...
Click to collapse
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.

Is it possible to downgrade software? For example if I'm running 1.66 now and wish to try the newest rom but find that I do not like it, could I downgrade back to 1.66?

west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
Thanks dude, I'll give it a try right now.
EDIT:
IT WORKS! BIG THANKS!

west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
What if i need to go back to the stock ROM, do i need to run stock rom again or just use the wipe all function?

Ask how to install android for a European version of HD2
I want to install android for my running HD2 ship rom 3.14.707.3,
2:15 radio contest to select the appropriate version of android to do, I heard that Android can run on hd2 (512) HSPL forward without your help, many thanks.

Same Rom other Problem
Sinds i have the 3.14 stock rom from HTC i get a the error i cannot install unsigned apps, and so i cannot run Android roms etc..
What is the easyst way to fix this.
Marc.

Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.

Did you run the ROMUpdateUtility.exe as Administrator???
You MUST run it as Administrator or it will not work correctly.
juniogyn said:
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Click to expand...
Click to collapse

HELLO
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?

flopesneves said:
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
Click to expand...
Click to collapse
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?

HI
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
kurt-willems said:
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
Click to expand...
Click to collapse

flopesneves said:
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
Click to expand...
Click to collapse
Maybe a suggestion, try a other Android build.

HI
kurt-willems said:
Maybe a suggestion, try a other Android build.
Click to expand...
Click to collapse
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms

flopesneves said:
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
Click to expand...
Click to collapse
the android builds on the hd2 android development subforum are all sd card builds, you can try any one of them