Related
Hi guys!
I know, that there are some threads about the topic, but i think, here it is a bit different...i´ll describe:
Everything was OK with my withe G1, since I forgot to recharge the battery, and the G1 switched off. I wanted to recharge it, but - you know- the red led light blinked...i read different threads etc, and then I decided, to buy a new battery. The new battery arrived yesterday, and I put it in my G1, tried to switch it on, and it worked. I was quite happy! I taped it on the charging unit, and the first problem: the battery display didnt moved, it remained at 23%, also after a few hours at the charging unit. I knew the problem, because it was the same with my old battery, but it doesnt interest me, because the battery recharged, only the battery indicator showed that not. I thought OK, dont thinked about it, and waited. Today: I took my G1, yes, battery display at 23%, no problem. I switched it off and after a few hours I wanted to switch it on. Second problem - F**K! The red led light blinked...and now, the battery doesnt recharge at all. The G1 works now only, if the charging unit is put on it, if I remove it, the G1 switchs off. Its the same behavior with the old battery.
I dont know what to do now, because i dont think, that it is a hardwarebug, because yesterday it worked, with the brandnew battery. Or is it possible, that the G1 destroys my batterys while switching it off?
I hope, that there are solutions for this...because im loosing my temper slowly...
Can you charge the battery if the phone is off? Red led light should show. You should wait even 30-60 minutes for this - it depends of battery discharge. If the red light will not show this will means that your hardware is broken (phone or phone charger). You can try use another phone charger to test.
That works sometimes....at the moment not, but one hour before, yes.
I had the G1 with the USB cable on the PC, the phone was off, the light was red (not blinking). I waited about 50minutes, then disconnected, tried to switch it on - nothing except a red led light - blinking
At the moment, there isnt any led light, if i connect the phone to the charger unit or the PC...
It looks like hardware problem :/
Would be OK, because there is still warranty.
But what irritates me, is, that it worked without problems, when the battery was charged. Also with the new battery...worked good, since I switched the phone off.
I only want to be sure, because the return merchandise authorization (rma) takes quite long time...
I have the same problem. last week i bought the phone, and used it till the phone battery was empty. I tried to recharge the phone, but i wouldn't go on, only the red light blinking. I had the phone charged for 2 days, with the og charger, no result. Looked like the phone was dead.
Today i tried it again, still no result. All of a sudden the phone turned on and was charging. It is now on 99%.
Should i contact HTC?
edit:
sorry, wrong forum
Just a wild guess. It could also be the ROM that you have. I had a similar problem with my battery drained out like that with flashing red light. Come to find out later that it was something to do with the ROM (CM6.x) that I was using.
So I thought I had turned my phone off last night because I left the charger at work but apparently it did not shut down and the battery died. I know that MAGLDR doesn't allow charging while the phone is off, does anyone know a way to get enough of a charge to get the phone to turn on so I can charge it fully?
I can charge in MAGLDR, just the orange light sticks on and will stay on until you pull the battery. Try giving it a few minutes just to get some charge in it, pull the battery, turn on and start the booting process, then plug the charger back in, works for me on NAND builds, did it last night even whilst calibrating my battery.
Ok I will plug it in and leave it for a bit, the orange light shuts off after a few seconds but we will see what happens. I was always under the impression that MAGLDR didn't charge
chrisrj28 said:
Ok I will plug it in and leave it for a bit, the orange light shuts off after a few seconds but we will see what happens. I was always under the impression that MAGLDR didn't charge
Click to expand...
Click to collapse
That's correct, magldr won't charge.
Another solution I saw a few days back said to go into Bootloader and charge from there - just tried it as an experiment and unless it charges without activating the charging light, Bootloader doesn't charge either.
When I had a similar problem I just kept booting it up into WP7, allowing it to charge for a few minutes until WP7 shut itself down again and then pulling the battery to repeat.
It took 5-10 cycles of this but eventually the phone decided it had enough battery to charge itself - seems daft to me too, but there you go.
If all else fails, search this forum - there was thread from a week or so ago where someone chopped a USB cable to charge directly to the battery terminals. A spare battery is also an option if it fits your wallet and timescales.
So the phone was really low, at 6% this morning. SO I put it on the wall charger. I saw the icon come up that it was charging and then put the phone down.
A while later I went back to the phone and saw that although the charger was plugged in to the wall and also plugged into the phone, it was NOT charging.
Using the phone I went to my contacts to check a phone number and then it turned off, due to no charge.
I plug it into the wall charger, the USB connected to the computer, as well as the car charger and here is what happens:
The top and bottom of the phone blink red for about 1-3 minutes.
Without pressing anything on the phone it automatically turns itself on, I see the Sony Ericsson boot screen, the Windows boot screen then my SPB Mobil Shell screen for about a second and then it turns off again showing and the blinking red light for about 1-3 minutes and then it starts the process all over again.
I think that a setting for Backlight/Power management was changed. As setting similar to "Only charge with usb", or "only charge when connected with ActiveSync" or somthing like that.
The problem is that I turned off the Active sync on the phone in order to conserve battery power so that I could look up the phone number from my contacts. And after I did that the phone shut off and I cannot change it, because it will not charge.
I do not have a different, charged, battery to try and do not think that I can find one easily.
Any suggestions?
Now when I see that the phone is re-booting(I see the SE logo), I use the stylus to to soft reset. It is obvious that there is some type of charge happening before it re-boots, , otherwise it would not re-boot. SO my theory is that by doing a soft rest between restarts, the battery will gain more of a charge each time. And possibly have enough of a charge so that I can go into my settings and see the backlight/ power settings have been changed.
So I took a battery from my old SE 902 phone and rigged it to work with my X2.
It booted up just fine. I was able to get into the menu for power settings. Nothig was changed however I did check the box "do not charge when connected to the computer" backed out of that screen and then went back into the screen and unchecked the box.
I powered down the phone and the screen went to the default charging battery meter.
I then put the proper battery in the phone and it was still blinking red. I saw it blink green for a few seconds, then I felt it vibrate, and then I saw the green battery meter. But after a few seconds it went back to blinking red and I could not see the battery meter again.
This seems to be happening intermittenly. As of right now there is a green blinking light and I see a dimmed battery meter.
Hopefully it will be fine, we shall see.
So it was charging for a while and now has stopped. I see the battery meeter, but there is no green bar moving up. and the light has stopped blinking.
I unplugged the usb and I still see the battery meter with no green bar moving. Installed the back cover and plugged the usb back in.
Now it is back to the red blinking again. . . ? ? ? ? ?
I think that it is a battery issue.
CAn anyone suggest why a battery would all of a sudden stop working?
Just ordered a new battery. $70.00!!! Ouch!!!
It does come with a battery charger for use with a Mini USB, but still, $70.00 is a lot of money!!
I will update with the results after i charge it up.
I got the new battery and put it into the charger. As I mentioned in an earlier post the new battery came with a separate charger for use with a mini usb. At first I had problems. The charger would not charge the new battery. I was using a wall connected mini usb to power the charger. So I went to the computer and tried the mini usb from there. It still would not charge. So I took the battery out of the charger and put it into then phone and went back to the wall charger and it was charging. I could feel the phone vibrate and then saw the battery meter slowly fill with green and back to empty and then fill green again.
So I decided to do a few other chores around the house and went to check the charging status after about 10 minutes. I noticed that the phone was on!! I did not turn the phone on. No one else was in the house to turn it on. It was just on. Weird.
So I took the battery out of the phone and decided to try the new charger again with the computer mini USB. It WAS charging this time!! I charged the new battery on this charger using the computer mini USB until the red light(charging) turned green (finished charging) and then put it in the phone. It works fine.
I then decided to put the defective battery into this charger and it was actually charging!! I left it overnight and it was green this morning: identifying it as a full charge.
When the new battery is down to 10% or less I will take it out and put the defective battery in and see what happens.
So I put the original battery back in after the green light came on identifying a full charge on the accessory charger.
It showed 1% and a message came up identifying that "the battery is low, please charge asap", something like that.
So, in my unprofessional opinion , the original battery is toast.
The new battery worked great after its initial charge using the included accessory charger.
When I decided to charge it using the phone itself with the wall charger I noticed some really weird things happening.
First of all you should know that I downloaded and installed Spoon Charge. Look it up here on the forums, free and works great. It basically tells you what charge level you have, temperature of the battery, what voltage is coming in to charge it and also type of charge the battery is doing: trickle, fast, very fast and on battery.You can set it to read reading at specific time intervals: I have it set to read at every second.
I noticed that the charge kept bouncing between very fast and trickle. At one point it went to on battery, then to trickle then to on battery then to fast.
Ok. Weird. . . I thought to myself.
So I let it continue to charge overnight.
The next day I "tried" to use the phone. it was as slow as it was at it's factory installed settings before I did the memory card fix, accelerator settings, and other fixes that I forgot now have forgotten that I have installed.
At this point I decided to drain the battery as fast as I could by turning on WiFi, Bluetooth, and play a movie at the loudest volume possible. As soon as it reached 10% I took the battery out and charged it with the accessory charger. The next morning I saw that the indicator light was green showing full charge and installed the battery in the phone. It booted up and I immediately received a message that the battery was low, saw 1%.
Knowing that this was a BRAND NEW BATTERY, I turned off the phone and took the battery out and waited a few seconds until I put it back in and rebooted the phone.
This time it said 86% charge!!!!!!
WTF!!!!
So I tried to use the phone and it was as sluggish as before. After about 25 minutes it was starting to be a bit faster but nothing like it was before.
I am really confused now. Since I have a new battery I have ruled out that as a problem. So now is it the phone itself? Could it be the wall charger that is faulty?
Any other suggestions would be greatly appreciated.
Another update.
I put the original battery in the phone and now it works!!!! The old battery that would not charge now charges and works!!!
The phone is not the same. Still really slow, can't get it out of the "LOCKED" position when I want to answer a phone call. Opera is sliggish then fast then sluggish. Not what I had the phone at before all of this started. It actually WAS stable. It WAS useable. Now I want to throw it into the drink!!!!!!
Not sure what to think anymore.
well bro go into the system help of ur mobile press as i say
2ce the end button one time call button, 2ce the end button one time call button,one time end button and u will find the problem it is in the charging port the same issue with me
Hello
Once ive completely drained the battery, and i got to plug my hd2 WP7 in from a wall plug, it automatically switches on.
Then, it goes through MAGLDR and the boots WP7 onto the welcome screen, then restarts back to MAGLDR again!
So what i have to do, is leave it on the magldr screen for a few minuites and wait for it to charge up a little before starting WP7.
Anyone else have this problem?
I have checked BatteryTool whilst plugged in and on 30 second test, i get between 392 and 465.
Is this typical? this is whilst in the wall and the screen on.
Cheers!
p.s just looked at the charger, and its supposed to be outputting 5v DC and 1200mA
Same behavior here.
Seems that after x restarts also is capable of loading wp7 tough.
I run into the same problem. If you let it hang in MAGLDR, even on the first boot, to let it charge up some, then it can boot on the first round. For some reason it doesn't boot if you plug it in when the phone is off; does it not charge in this situation? I am yet to actually bust out a multimeter
The new magldr being developed supposedly fixes that. We all get that issue.
HD2 does it even without modifications. It seems it happens when it doesn't have enough charge to boot all the way into the OS so it reboots forever. As homeworld1031tx says, leave it on magldr screen for a few minutes which should let it get enough juice to boot properly.
aaah, glad to know im not the only one having this issue!
It becomes even more of a problem when your using a car charger.
I guess we will just have to waitt for the next MAGLDR
another one to watch out for, and that was what i thought you was going to say from your title
is that if you charge the phone whilst the red light blinks, it will not charge!
From what ive noticed this can happen from one of two ways, firstly is that you get the phone to hot, it seems to have some kind of thermal cut out, the second way is to run the battery right down low, it seems to get confused sometimes and wont let you charge even within windows. Infact the battery monitor program can sometimes show you a negative value for the charge left in the battery
In fact it almost discharges the device, The battery is a real pain in the arse, my advice to you is get an external charger cuz the other thing with using MAGLDR and The bootloader to charge is that it messes up your clock, an if you get a bunch of txts whilst its messed up it can be a pain in the arse to find them!
This isnt likely to get completely fixed guys (the Magldr issue fix is slightly different and wont fix everything), to try an make the best of a poor situation, i find a nice cradle with an Aux charge slot on it and a spare battery works wonders.
Hello
My battery sucked, like going from 100 to 20 in 10secs so i asked for a new one from huawei greece. They sent me a new battery and when i put it into the phone and tried to boot it phone didn't boot. I thought it was because the battery was empty and when i connected it to charge first the light was blinking red and then phone boot up to the battery screen. 15min later i realised the phone was boot up and the red light was blinking red and not like staying red which is the light when you charge it with no battery. the percetange was 0%. i left it there for a little bit but nothing happend. then i tried to turn it off while it was connecting to the charger but that just boot up again with the same red blinking light and 0% percentage. I'm on aurora sp on top of aurora v20. When i try the old battery everything is working ok like it charges and everythinh. Could someone help me out?
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
dark_vader said:
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
Click to expand...
Click to collapse
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Cybergiannis said:
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Click to expand...
Click to collapse
Okay. Ask Huaei to change your battery since it's damage for another one you have and can active warranty do that