i recently bought a used dual boot htc hd2 (windows7-android 2.3.4) now im ready to commit i want to install android over windows 7 but i dont know where to start. there are so many builds and installation options that my head is spinning. i like the version of android im running ( cope&warrenb present: AmericanAndroid GB233 CyanogenMod7.1 HTCLEO 050111. a link to guide that would work for me would be great. thanks
Try the steps in this forum http://forum.xda-developers.com/showthread.php?t=933951 but first you need hspl installed, try searching on how to install hspl first
You can check out the guide in my sig to find how to flash HSPL.
T-Macgnolia said:
You can check out the guide in my sig to find how to flash HSPL.
Click to expand...
Click to collapse
thats his favorite line !!!
jk...
backlashsid said:
thats his favorite line !!!
jk...
Click to expand...
Click to collapse
Ha Ha Ha you are right, it saves me a lot of typing too.
Plus I wrote it to help people so I want people to know about it.
im all ready confused....how do i find what SPL or HSPL version my phone has installed.
ps. my phone already has MAGLDR V1.13.
none of the nand rom files i downloaded have a DAF.exe or Install.exe
Folder--\boot
| |_\meta-inf
|___\system
Related
I downloaded and installed HSPL 2.08 for installing Android on HTC HD2. Do I need HSPL 1.42? If so, please help on how to get it!!
Thanks
sledbiz said:
I downloaded and installed HSPL 2.08 for installing Android on HTC HD2. Do I need HSPL 1.42? If so, please help on how to get it!!
Thanks
Click to expand...
Click to collapse
read it carefully You will get it good luck thats how many ppl make mistakes and brick their phones they dont read it and do what ever. Read it over and over again untill you get it and thats when your ready to mod. Everything comes with a price....
Hello !
I found here a lot of informations about the developpement of many roms for Android 2.2 on HD2. But as you guess, i'm not specialized in mobile developpement, so i'm a bit lost in this huge amount of informations ...
I simply try to find a simple and concise procedure to install android 2.2 on HD2 (wm 6.5 is installed at the moment).
Must i strictly use the loader Haret ? Android can be loaded only in dual boot ?
Which roms must i choose ? Why is there many roms ?
Is there still major known bug ?
Best Regards
theres a damn guide thread on the first post of this section as well as on the first page of android development section...
theres no simple way of doing it ... every one has his own journey ... think of it as a graduate thesis , but there are some guides for your aid i wish u luck and fortitude on ur way
http://forum.xda-developers.com/showthread.php?t=732380
gonna read and test these docs. Thank you.
charly222 said:
gonna read and test these docs. Thank you.
Click to expand...
Click to collapse
this this one, might appeal to you as a newbie
[GUIDE] Newbies Step by Step Guide in booting ANDROID for HD2
Thanks because i start the instructions and at first
"NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first"
the programs fails to install on Win7 64bits ultimate offical
Second attempt : RAPI.dll is missing ...
ok need the 64bits version : Microsoft Windows Mobile Device Center 6.1 Driver for Windows Vista (for win7 of course )
just a question after falshing the rom ...
a) i took the Parad0XUA_Experimental as suggested here : http://forum.xda-developers.com/showthread.php?t=732380
b) plus the Elegancia MaxSense WITHOUT HTC Messaging (i guess i could send message with another interface ?)
how i install the Parad0XUA_Experimental ? it works with Haret which is a sort of bootloader isn't it ? is there a better alternative ?
what are the avantage/disavantages of installing the build on phone or sdcard ?
The rom must be installed too on the phone memory or the sdcard ?
Thank you for your kindfull help
ok so i finally test the
- New Froyo build by dan1j3l V1 that my win 7 don't recognize when i plugin the phone
- Miri_Steve0007_EleganciaMaxSense_V5.0_FINAL_NoHTCMessaging
that is a sort of skin but not an OS as i expected. The RUU file patched the windows mobile 6.5 OS instead of the android one ... while i was in an active sync session.
is there an Android 2.2 ROM that works well, for which i could connect to my PC ??
Has somebody tested the FroyoStone Sense - Version 3.1 (29-September-2010) ?
Regards
gawd u r hopeless...
1. flash hspl to change radio to 2.10.50
2. flash chuckydroidrom
3. download android file to SD card
4. click on android loader
charly222 said:
o
Has somebody tested the FroyoStone Sense - Version 3.1 (29-September-2010) ?
Regards
Click to expand...
Click to collapse
Tinkering with the phone isn't for everyone. From your posts you may fall into that category of 'don't do it.'
The thread you are referencing has hundreds of posts of people that are and have been using it.
Wow.
Dude. Stop. Before you brick MY phone!
Ha...
J
apallohadas said:
Tinkering with the phone isn't for everyone. From your posts you may fall into that category of 'don't do it.'
The thread you are referencing has hundreds of posts of people that are and have been using it.
Click to expand...
Click to collapse
Hi !
It's not a thread but just a download link referenced here http://gamesquare.co.uk/android.html
apallohadas said:
Tinkering with the phone isn't for everyone.
Click to expand...
Click to collapse
the HSPL v3 is installed so i can go back anytime ? What's the problem ? You think you're part of an elite so i'm too stupid to undunstand what you try to explain clearly ?
mini_robot said:
gawd u r hopeless...
1. flash hspl to change radio to 2.10.50
2. flash chuckydroidrom
3. download android file to SD card
4. click on android loader
Click to expand...
Click to collapse
Yo mini !
I'm gonna try your solution just to try. Just 2 last question :
why elegancia update my win mobile os(on phone memory) instead of Android one (on sd card). I've just run the CustomRUU.exe file from win7 with active sync enabled ...
is there a way to avoid the Haret process and to simply replace the win mobile os ? How can i check if it's ok for Europe Mobile ?
p.s. : i use Radio Leo 2.15.50.14
FroyoStone Sense - Version 3.1 (29-September-2010) seems to be ok
charly222 said:
Hi !
Click to expand...
Click to collapse
Hi.
It's not a thread but just a download link referenced here http://gamesquare.co.uk/android.html
Click to expand...
Click to collapse
Do *you* even know what you're talking about? Did you try reading the very thread you linked?
the HSPL v3 is installed so i can go back anytime ? What's the problem ?
Click to expand...
Click to collapse
The problem is that you obviously didn't read. Not reading in this case can get you a nice bricked phone.
You think you're part of an elite so i'm too stupid to undunstand what you try to explain clearly ?
Click to expand...
Click to collapse
The only person calling me elite is you. Thanks.
And it's entirely possible that you are indeed too stupid to follow my explanation. That is for you to decide. Just keep in mind that *I* didn't call you stupid. You did.
it works dude
I dont like android... Why go do the time-eating thing with black and white text all the time? Naaaah I will wait for a easier solution... Havent got time to wait everytime I want to do android....
I know this may sound stupid but I just cant get the gingbread 2.3 to work. I have the MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK . I don't have data.exe but have data.img will that work? I am new to this and have been trying to get this to work for the past 4 days. I have zImage and initrd.gz do i need those on my sd card? any help would be so greatful....
Go here and read instructions. If you cant follow them it means you haven't read any of the guides in stickies.
PS.
You dont have to manually put a "Q" or put the date in your topic title.
TheATHEiST said:
Go here and read instructions. If you cant follow them it means you haven't read any of the guides in stickies.
PS.
You dont have to manually put a "Q" or put the date in your topic title.
Click to expand...
Click to collapse
Don't be so hard on newbs man....
TheATHEiST said:
Go here and read instructions. If you cant follow them it means you haven't read any of the guides in stickies.
PS.
You dont have to manually put a "Q" or put the date in your topic title.
Click to expand...
Click to collapse
Thank you I am re-reading instructions and guides. Hopefully I get it this time Im just not cell phone savy thats why im not getting it...sorry hopefully this time around i will
jalshah05 said:
Don't be so hard on newbs man....
Click to expand...
Click to collapse
huh??
How in the hell was that "hard" are you on crack or something?
Get off your high horse dude.
bunnysface said:
Thank you I am re-reading instructions and guides. Hopefully I get it this time Im just not cell phone savy thats why im not getting it...sorry hopefully this time around i will
Click to expand...
Click to collapse
The "best" way to learn bud is to do some real reading. I know it can be a bit daunting at first but honestly its the best way. Been walked through something is too easy and you wont pick up valuable information as much as you would if you worked it our yourself.
There is some really good guides to follow, have a look through them and have a go.
i cant see this page
who i can do to this content???
marcocr05 said:
who i can do to this content???
Click to expand...
Click to collapse
What?
Sent from my HTC Vision using XDA App
it is a lot of reading ! I have logged several hundred hours of reading to get to the point that i'm at !
Struggling while installing Android 2.3 Gingerbread on HTC HD2 (NAND)
Thanks guys for your prompt replies. This my situation: I installed Android 2.2 on my HTC HD2 with
RUU_Leo_S_HTC_WWE_3.14.405.2
Radio_15.42.50.11U
2.15.50.14_LEO_S_Ship
HSPL 2.08
MAGLDR V1.13
Android 2.2
Everything works great. Recently, I wanted to upgrade to Android 2.3 Gingerbread so to I upgraded successfully the MAGLDR1.11 to MAGLDR1.13.
Now, I spent a longtime reading your replies to the other users and it seems my case is a bit special, therefore I have 2 questions:
1- The MAGLDR113_DAF file I downloaded contains the ROMUpdateUtility (that you advise users to use) and also has a DAF file. I can see clearly at system start up that my MAGLDR is 1.13. So, does this mean am good? or do I still need to open the DAF through the tri colour screen bootloader, as some have suggested? Please help clarify my confusion.
2- I downloaded Android 2.3 Gingerbread on HTC HD2 (NAND) and extracted it to my 8GB SD card root, when I open the Android folder on my HD2 and tap on CLRCAD.exe, I get "file type exe not found" message, I tried with haret.exe as well but I always get the same message. Could anyone advise what I am doing wrong?
By the way, I used first a 2GB SD card, after being formatted, in vain then formatted a 8GB SD card, copy, paste Android folder on root, in vain. always same message.
Thank you very much guys and once again, I really appreciate your time and patience with us.
well if you're going for NAND you should not been able to toutch the CLRCAD.exe/Haret.exe wich probably means that you've downloaded a SD build.
you should go to the NAND section of this forum and find a rom there.
the instructions for installing a NAND rom are in de first few post by the dev himself.
goodluck
Struggling while installing Android 2.3 Gingerbread on HTC HD2 (NAND)
Thanks XthelordinatorX for your prompt feedback . I will try your suggestion and share my findings.
Need help with installing Android 2.3 Gingerbread on my HTC HD2
Hi XthelordinatorX, I have to admit that Mobile technology is not my strong point. I am not sure what rom to install. could you advise what's the best one you recommand for HTC HD2 Leo.
I am open to your suggestions guys! your help is highly appreciated
I have right now Android 2.2 Nand on my HTC HD2 with
RUU_Leo_S_HTC_WWE_3.14.405.2
Radio_15.42.50.11U
2.15.50.14_LEO_S_Ship
HSPL 2.08
MAGLDR V1.13
Android 2.2
Thank you very much
hello
i want to put android on nand on my hd2 i read that i first need hspl3 to do that i need
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
but i have spl 3.03.000 ...can some one please tell me how i can downrade my spl to any one above please help? any other step by step guides would be much apreciated ..
hspl4 choose 2.08.hspl only, NOT 2.08.0000
samsamuel said:
hspl4 choose 2.08.hspl only, NOT 2.08.0000
Click to expand...
Click to collapse
i dint even know about hspl4 anyways thankyou verrryy much
and one more thing why 2.08.hspl and not 2.08.000
and can i run magldr with hspl4 is it comatible??
siddharth singh said:
i dint even know about hspl4 anyways thankyou verrryy much
and one more thing why 2.08.hspl and not 2.08.000
and can i run magldr with hspl4 is it comatible??
Click to expand...
Click to collapse
Because MAGLDR only supports HSPL 2.08 right now is why you have to have 2.08. Also here are the two best guides I have seen here on XDA for installing a NAND Android ROM on your HD2. I highly recommend you take a goodds look at both of them.
Senior Member MSkip's Guide:http://forum.xda-developers.com/showthread.php?t=893948
Member Gunjaman's Guide:http://forum.xda-developers.com/showthread.php?t=939682
Here is a link to HSPL 4:http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Here is a link to MAGLDR 1.13:http://forum.xda-developers.com/showthread.php?p=10197474#post10197474
Here is a link to Clock Work Mod (CWM):http://forum.xda-developers.com/showthread.php?t=898913
HSPL is the same if it is HSPL 2, HSPL 3or HSPL 4. They just include and support the most recent versions of SPL and provides the corisponding HSPL. When you flash HSPL it allows you to choose wich version of HSPL or SPL you want to flash. I think this is what you are looking for, happy flashing.
Hehe, 12 months ago that's more like the answer I would have given,,, now I'm old and jaded i can only manage 1 - 2 - 3
samsamuel said:
Hehe, 12 months ago that's more like the answer I would have given,,, now I'm old and jaded i can only manage 1 - 2 - 3
Click to expand...
Click to collapse
Ha what can I say I try to be a nice guy. But I do totally know where you are coming from Samsamuel, I also see why people get so upset when people start threads or post with questions that have threads with the answer they are looking for all over XDA. Heck when I first found XDA via watching YouTube videos I was totally scared to even post so I searched thread by thread and post by post until I figured out how to safely flash a custom ROM and run Andriod from SD. I even set up all night three nights in a row just searching for APN settings to get my Android build on SD card to get a data signal. So even though I do get tired sometimes of just handing the same information out over and over and over again. I can not help but remember how lost I was and felt trying to learn all of this on my own, so I try to do my part. Plus I am like you Samsamuel I beleive in carma too. Plus you have done your share of helping people here out, beleive my I know, I have read sooooooo many of your post. Hats of to you my friend.
Ok done with my rambling now lol
Lol thanku guys u all r the best ;-)
Sent from my HTC HD2 using XDA App
once i install magldr will i be able to access my current windows mobile rom??
siddharth singh said:
once i install magldr will i be able to access my current windows mobile rom??
Click to expand...
Click to collapse
once you have magldr, you no longer have windows mobile. so no, you cannot access it.
you can flash back to WM, but you will lose your nand android rom.
jsmccabe78 said:
once you have magldr, you no longer have windows mobile. so no, you cannot access it.
you can flash back to WM, but you will lose your nand android rom.
Click to expand...
Click to collapse
is it necesary to download CRW 1.3 or i can flash android through magldr too ??
if it is compulsory then whic one should i download i will be us the cyanogen mod 7 ones generaly and is 400 mb partition one be used with all android roms
siddharth singh said:
is it necesary to download CRW 1.3 or i can flash android through magldr too ??
if it is compulsory then whic one should i download i will be us the cyanogen mod 7 ones generaly and is 400 mb partition one be used with all android roms
Click to expand...
Click to collapse
yes, you can flash via magldr or CWM so no you don't technically need CMW- your desired rom will tell you which.
This is not my first time..
I booted android on 2 phones.. but this phone is giving me hell..
Got new HTC HD2..
Had spl 2.10.
Downgraded to 2.08 then hardspl to 2.08. Hardspl
installed radio 2.15.50
installed magldr
installed cwr
installed multiple roms.
When try to boot android always stuck at booting screen, few roms just keep restarting.
I tried to go back to official tmobile rom and restarted the whole process again. but notting works.
please help.
kelvin_swe said:
This is not my first time..
I booted android on 2 phones.. but this phone is giving me hell..
Got new HTC HD2..
Had spl 2.10.
Downgraded to 2.08 then hardspl to 2.08. Hardspl
installed radio 2.15.50
installed magldr
installed cwr
installed multiple roms.
When try to boot android always stuck at booting screen, few roms just keep restarting.
I tried to go back to official tmobile rom and restarted the whole process again. but notting works.
please help.
Click to expand...
Click to collapse
well if i stuck on boot screen it's like ur phone is empty ...try task29 to clear everything from ur phone memory and reinstal magldr ...maybe it will help u
made sure the partition size is correct for the rom ?
mootmetal said:
well if i stuck on boot screen it's like ur phone is empty ...try task29 to clear everything from ur phone memory and reinstal magldr ...maybe it will help u
Click to expand...
Click to collapse
Tried this too..
Richy99 said:
made sure the partition size is correct for the rom ?
Click to expand...
Click to collapse
How would i do this? Can you please explain
kelvin_swe said:
How would i do this? Can you please explain
Click to expand...
Click to collapse
Hi,
Each ROM nowadays seems to have a different sized CWM partition.
This is generally well explained on the [OP].
Read carefully,or at least post which ROM you intend to use,so that someone could maybe check for you.
malybru said:
Hi,
Each ROM nowadays seems to have a different sized CWM partition.
This is generally well explained on the [OP].
Read carefully,or at least post which ROM you intend to use,so that someone could maybe check for you.
Click to expand...
Click to collapse
I am using these ROMS. i have 2 hd phones all these roms boot fine in the other phone with broken screen. but on the new phone it just hangs..
CMYLXGOroms.Stock.Desire.HD.v1.1.18n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.9OC_CWM
Pyramid_HTC_Europe_1.35.401.1_v1.4_Tmous
kelvin_swe said:
I am using these ROMS. i have 2 hd phones all these roms boot fine in the other phone with broken screen. but on the new phone it just hangs..
CMYLXGOroms.Stock.Desire.HD.v1.1.18n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.9OC_CWM
Pyramid_HTC_Europe_1.35.401.1_v1.4_Tmous
Click to expand...
Click to collapse
Hi,
Only other thing I can think of is;
have you got the correct ROM for your phone...magldr/clk...tmous/EU 512
OP, you should really use the search feature instead of asking repeat questions.
Do this:
Task 29
Update Radio
MagLDR 1.13
Clockwork Mod Recovery
ROM
Done.
agentfazexx said:
OP, you should really use the search feature instead of asking repeat questions.
Do this:
Task 29
Update Radio
MagLDR 1.13
Clockwork Mod Recovery
ROM
Done.
Click to expand...
Click to collapse
bro did u read my question.. i did everything which you stated above
malybru said:
Hi,
Only other thing I can think of is;
have you got the correct ROM for your phone...magldr/clk...tmous/EU 512
Click to expand...
Click to collapse
Pyramid_HTC_Europe_1.35.401.1_v1.4_Tmous - CWR 5/240/5!
It's in the post
You might need to flash correct cwr partition... Have you done it yet?
HTC HD2 Miui 1.7.8
[email protected]
kompheak said:
You might need to flash correct cwr partition... Have you done it yet?
HTC HD2 Miui 1.7.8
[email protected]
Click to expand...
Click to collapse
Yes i figured it out that this is the problem.. Thanks for your time
kelvin_swe said:
Yes i figured it out that this is the problem.. Thanks for your time
Click to expand...
Click to collapse
So now that you have it figured. Run the Tmous version and see if you like it then download the EU version with CWM partition size 190 instead of the 240 you used for the Tmous version. It works and you get more free ram. I am runnning EU ROM with 150 partition and am getting 250+ ram free 24/7. Just a tip to any US HD2, you can run the EU version of any Rom.
And please rename thread with [SOLVED] at the beginning of thread name. Now others won't need to waste time and help, and "EXPERTS" won't come to flame.
Sent from my HTC HD2 using XDA App