Related
alright so I'm new to this, but I followed the instructions to hardspl, and got up to the point where i had 4.70yang as my spl, and was going to flash through SD. it wouldnt read the SD card, and i tried formatting it in FAT32, with the allocation unit size to 4096, and when that didnt work, i tried other variations. Then I figured I'd try flashing the other way, but couldnt do it because i couldnt get a sync with the computer. I didnt know whether to go into the actual canonyang ROM, but anyway I did, and if I connect the USB cable, nothing happens, no activesync. i tried the bootloader screen, no USB connection. every other alternative i saw, removing the hardspl, flashing otherways, etc etc i cant do without a USB connection. im not sure if i did anything wrong, im convinced i didnt. im hoping the solution is really simple, cause i cant get activesync to work.. im really frustrated, lol. if anyone could offer solutions, that would be amazing.
elrotenga said:
alright so I'm new to this, but I followed the instructions to hardspl, and got up to the point where i had 4.70yang as my spl, and was going to flash through SD. it wouldnt read the SD card, and i tried formatting it in FAT32, with the allocation unit size to 4096, and when that didnt work, i tried other variations. Then I figured I'd try flashing the other way, but couldnt do it because i couldnt get a sync with the computer. I didnt know whether to go into the actual canonyang ROM, but anyway I did, and if I connect the USB cable, nothing happens, no activesync. i tried the bootloader screen, no USB connection. every other alternative i saw, removing the hardspl, flashing otherways, etc etc i cant do without a USB connection. im not sure if i did anything wrong, im convinced i didnt. im hoping the solution is really simple, cause i cant get activesync to work.. im really frustrated, lol. if anyone could offer solutions, that would be amazing.
Click to expand...
Click to collapse
Please keep all non-development posts off the development forum.
As far as your problem goes:
Activesync won't connect per say in SPL mode but it should still let you flash. In SPL mode, there is no syncing so the icon never turns green but it still works just fine. As far as working with the SD card, the SD card cannot be a SDHC card. The SPL doesn't have a SDHC driver.
Try a smaller SD card (2GB's or less since they are usually non-SDHC) or flash through SPL even though activesync doesn't show as connected.
sorry about posting it in the wrong place. where should i have posted? and thank you for replying
and what IS the SPL mode? what screen should i be seeing? cause if i let it load then it just goes to the regular phone screen as if im on an actual OS, and sync doesnt work there. and yes im using a 2gb SD card, not SDHC.
elrotenga said:
sorry about posting it in the wrong place. where should i have posted? and thank you for replying
and what IS the SPL mode? what screen should i be seeing? cause if i let it load then it just goes to the regular phone screen as if im on an actual OS, and sync doesnt work there. and yes im using a 2gb SD card, not SDHC.
Click to expand...
Click to collapse
Ok, make sure you followed these SD Flashing instructions: http://forum.xda-developers.com/showthread.php?t=581996
It should work. And also, please read up on the terms, and that will help you understand everything.
And what Ivan was referring to, about flashing without ActiveSync connected....put your phone into the bootloader, connect USB, wait one minute, and then attempt to flash. Tell me if you did EVERYTHING in the first paragraph's link first, though.
OK. I see what the problem is. You're in the OS but the OS is the stripped OS.
Hold down your camera button and then press the soft reset button. Then you'll be in SPL mode. From there you can flash anything you want.
hey thanks for the help ive flashed a ROM or two using flash center so thats working fine i got past that. but im still trying to flash through SD. it wont read my card still after formatting it to FAT32 and putting the HERAIMG.nbh file. i read on another post that the nbh version number could be a factor? how would i go about messing around with that?
As I mentioned: Is your SD card a SDHC card? If it is, it won't work. The NBH version is set by the cook and if it works with the flash center then it works with the SD card. Any ROM created for flashing through SD card is made with the correct numbers.
Hey Ivan
I'm new here and i've flashed several ROMS via RUU, so far the Glass one is my favorite.. Since y'all are on the topics of SD or SDHC cards, quick question...
I have a 2 gb SD card and i've been unsuccessful in flashing via SD. Formatted in fat32, named it HERAIMG.nhb and put it in the root, already been hardspled. Here's the question, in XP it shows as "Secure Digital Storage Device" I was wondering maybe the bootloader couldn't read the SD because it's the "secure" type not the regular one? Tried the quick format and full format to no success.
any input would be helpful
Secure Digital is what SD stands for. No matter what brand you use, that is what they are all called. There is no regular or secure SD card.
Hi i have flashed my HD2 from a sd card for more than 30 times but now I am unable to flash using my sd card.
I get into the boot loader mode with leoimg.nbh on sd card, but in the bootloader mode white colored loading screen appears for some fractions of a second and returns to tri color screen.
I was using Ozrom on the device last when i discovered this problem.
spl - 1.42.hspl
cotullahspl
Please help...
Sorry for my bad english.
Also I had already done alot of searching but could not find anything...
Update :
Now i cant flash from usb also. First I was able to flash from usb but now I cannot.
-Tried using a new sd card and formatted with fat32 file system. Problem still exists...
-Checked the file name and extensions its not "leoimg.nbh.nbh".
-Tried flashing just leoimg.nbh on card
-tried flashing with 5 different roms from different cooks
-tried renaming the file to capitals LEOIMG.nbh
-updated the hspl to hspl2 2.08
Problem is not solved.
There may be a problem with the sd card. Are you still using the same card you have used before? If so, try formatting the card (FAT32) or try a different sd card if you have one.
You can of course continue using usb, sd card flashing is only really needed in order to remove hspl.
Maybe is your card corrupted, try to format it in FAT32...
Tried using a new sd card and formatted with fat32 file system. Problem still exists...
Mate, you only need to flash from sd card when you cant flash from usb. I dont know why you are getting this error but dont worry too much. Did you name the file correctly (leoimg)? It's easy to make a mistake here. Some people rename the file to leoimg.nbh - you dont need to add the .nbh. It's already an nbh file - so you would end up with leoimg.nbh.nbh
Lastly dont flash a 2.10 rom via sd card or you will end up stuck with an spl that you cant change
i know about the file extensions and file names...i am flashing since 3 years from memory card....i am not a newbie..tell solutions other than the problems occured to noobs...like rename error..format memory card stuff...i want some solution other than that..
thanx alot for your support its really appreciated...looking forward for your help..hope now this time you can divert me in the right direction
also i have work of travelling so i have to flash my phone sometimes on the go
Regards
ankush1492 said:
also i have work of travelling so i have to flash my phone sometimes on the go
Click to expand...
Click to collapse
sorry but thats lol... shouldnt u be using phone on bussiness trip instead of messing with it?
i did not said that i have business trips..i travel a lot..so getting bored i start messing with it...LOL
can anyone help me in this???
Same problem
Guys, indicating same problem - SD reformated, still same situation. Tried also re-flash shipped ROM etc., but nothing helped. Doesn't work also on original SD (2 gigs).
does your "loading" screen in your bootloader comes and goes very fast???
ankush1492 said:
does your "loading" screen in your bootloader comes and goes very fast???
Click to expand...
Click to collapse
Try capital letters LEOIMG.nbh etc etc
try install 2.08.hspl, that also happened to me. fixed when i install 2.08.hspl from HSPL2.
tried capital letters LEOIMG.nbh also installed 2.08 hspl2. problem is not solved....
I have this problem as well.... I have hslp2 2.08 I TRY'de IT WITH 3 DIFF SD CARDS 4GB 8GB 16GB fat 32 AND NOTHING!!!!!!! ANYONE knows how to fix this????!?? I have NEVER been able to flash from sd I have a tmo usa hd2 maybe using task29 could fix it but it doesNT!!!
aby help PLEASE
Please xda. This problem may arise and annoy many users. so please help so that we can find some solution..
problem still exists can anyone help?
I always used to flash my diamond from internal storage when i had it. Got my HD2 and carried on flashing from SD for my first 2 or 3 ROMs and then it stopped working having the same thing as you. As if it tries to read the .nbh then goes back to the bootloader. I havent let it worry me as im nearly always next to a pc when im flashing a new ROM (have to be now), but I would be interested to find the answer as well.
but no one is really interested to reply here peovide a solution.....infact they are advising to flash from a pc...but i want to flash from a sd card
Just keep using USB, less lilkely to go wrong anyway
For some reason i cant turn my phone off. I've used 5 different versions of android and the first two roms worked fine, i could turn my phone off normally and start android right up again. But for some reason i get the error cant find rootfs on root of sd card when i try and reboot my phone after the first boot. so basically my phone cant run out of battery otherwise i have to clear out my memory card and redo everything all over again.
i dont know why this is happening but i am currently running on Omega v13 gtx rom.
Please help me try and find a way to fix it because it really sucks having to reformat my memory card every time my phone dies. Thank you
Reformat (2 or 3 times) and reinstall.
Ensure you read the "readme" file from whatever rom you are using on the SD card.
Last ditch.... consider that HTC is sending new SD cards to those who call and complain their card is unrecognized. (You may have a bad card; and HTC will replace for free.... Search these forums for info).....
i've tried that and i still havent been able to get things fixed, and im pretty sure my sd card isnt defective since only the newer builds have been doing this
Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
You need radio 2.14 or more for Android.
aka, upgrade your ROM.
You are not alone
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Know the feeling
I have been trying all the different android magldr sd roms and everytime its the same story. First boot fine. Second boot and on it just hangs at the green htc logo. I have tried so many things i don't know what to do next.
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Gibbo3771 said:
Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
Click to expand...
Click to collapse
Solution!
Instructions :
- Download the Android SD version of your choice. Unzip, Extract the 'Android' folder to root of your SD Card. (Make sure to Format the SD card before doing this.)
- After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET
-Booting ..
-Enjoy
kottaho said:
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Click to expand...
Click to collapse
Ater trying some nand roms i came back to the orignal firmware( the same as you).
And i also have this problem , it just load into a picture with htc on it.
Have you tried using a different SD card? My Sandisk 8gb didn't accept anything. I had an old 512mb laying around that came with my E90, loaded SuperRAM on it (aprox 450mb including data.img) and it booted straight away.
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
I also try to get Android in my HD2 (energy ROM). I am somewhat puzzled however: I want to flick back and forth between WM and Android and many programs I have reside onto my SD card. I have read in an earlier post that before attempting Android I should format my card - does this mean that I cannot have WM data (programs etc) in the same SD card I run android? or that I can transfer them back AFTER I manage (if) to load Android?. Thank you
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Aesthetic said:
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Click to expand...
Click to collapse
OK thank you - got it!
Unfortunately I cannot get passed the green HTC splash screen - my HD2 stays there for time no end and the only solution is to take battery out. Any suggestions?
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Got uber annoyed with the SD method, just ended up doing a full scale flash to ROM. Was easier lol
MrAskani said:
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Click to expand...
Click to collapse
I am using Energy ROM (Energy Serie: Energy.Leo.28244.Sense2.5.Cookie.2.0.Feb.12)
My phone just hangs on the white HTC screen when I try to boot into Android from the SD card. I flashed my ROM with SSPL_RU after an update with the Stock ROM (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
ehh
Aesthetic said:
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Click to expand...
Click to collapse
I would almost agree with that except, i have 2 exactly the same 16 gb cards, each with a 3 gb fat32 primary partition. 1 loads android but wont allow me to do things like take pictures[it says there isn't an sd card.] The second card just hangs at the green htc screen. Even if I copy the working partition to the other card, it still hangs.
evo1rs said:
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
Click to expand...
Click to collapse
Thanks for this Info. I didn't take into consideration that the file will be enlarged during booting. The copied Android folder was 508MB in size but this got enlarged to about 1.3GB during boot up. I thought if I just leave about 1.2GB in all the SD card I have been trying that it should be enough. But I was wrong.
Thanks a lot I have done multiple reboot without any problem.
I am enjoying my first Android feel.
Thanks once again.
Android on HD2 hates most SD Cards
From my own limited experience to also having read many posts I can say that most sd cards prevent Android from running properly on the hd2. Mine works fine with radio 2.14/2.15 and the stock Sandisk 16gb card that came with my tmous hd2, but I recently tried a wintec 16gb card that made Android run like a broke-wheel-cart and other sd cards I have laying around make it fail.
I think everyone needs to add what card they are using to their signature, or else we might all just end up howling in the wind.
Based on some feedback from another post I just ordered this Sandisk 16gb card from Newegg. It is Model # SDSDQ-016G-A11M . It is reported that that model# provides class10 speeds even though it is sold as a class2. It's use with Android is supposed to be good.
Received my first HTC through the post yesterday and joined the site in an attempt to run android. I know nothing and there's an overwhelming amount of information on this site so just need someone to point me in the right direction.
Used this and followed instructions carefully: http://forum.xda-developers.com/showthread.php?t=957652
My problem is after running clrcad.exe and haret.exe, the phone reset after a grey screen. Looked like it went well but now the SD card has disappeared from the file explorer and windows when connected through USB.
Any help appreciated, just want to get the SD card back up so I can format it and so on. Thanks.
I take it by the lack of replies that this isn't a common problem. It's kind of put me off trying any new ROM's as a simple procedure like this can't even go straight. Will have to stick with Winmo then
Im not quite sure anymore, but i dont think you are able to mount your sd as long as you use sd builds. I dont know if this is changing with an ext partition on your sd.
Just check out the NAND section. Its installed on your internal memory and not running from sd. WinMob will be fully deleted and replaced with Android, so first do a backup of contacts etc!!!
If you do not need WinMob for any kind of apps for work etc which arent ported to Android yet (which i dont think there are much NAND is the best solution for you.
Started like you with sd build 2years ago, too. But switched to NAND as soon as it was stable.
Now it is almost perfect.
Sent from my HTC HD2
I have same problem
I had the same problem but now i use magldr and boot-ing goes vith no problem and the card is showing
deth667 said:
I had the same problem but now i use magldr and boot-ing goes vith no problem and the card is showing
Click to expand...
Click to collapse
How did you get the card to show again? Or did you buy a new one?
Just a thought,have you tried a soft reset? Switch phone off Take back cover of and press little red button for a few seconds,put cover back on reboot into android
Also make sure your SD card is formatted to 32kb (slow format)
Sent from my HD2 using xda premium