[Q] Not Rebooting - Click General

i m using Kalim Cynogenmod GB 7.0.0
i install new rom than install Google apps
than start phone setup Google sync & install some apps than restart phone but it stuck to TATTOO screen no bootanimation
Than i tried wipe cache in recovery i restart but problem is should i everytime reboot in recovery & wipe cache it is annoying
What i do ?

What version of recovery have installed?try installing the latest.. 3.0.2.7
what you install the rom version 7.0.0? have the 7.0.3 or test version 7.1.0 that containing android 2.3.4 and works perfectly.

I have latest recovery 3.0.2.7 Rom 7.0.0
but I mod Rom remove some apps & add new apps launcher pro handcent dialer one
is they create problem
I don't understand why wiping cache Rom boot again

Flashing the rom from the recovery,preferably the latest version,forget the rom manager,errors arising lately tattoo with ro mmanager.

Related

Help Will 5 MIUI Rom

Good afternoon
I come from the last verção ICS Cyanogen mod 5 / 12 but when I install Miui rom the phone is simply not boot or crashes when connecting my palace just after installation
Rom install Miui
-Wipe Data
-Wipe Cache
-Wipe Batery Stasta
. I have installed recovery boot menu because I have everything right Cyanogem working
After MIUI nothing works only Boot menu, Recovery,
Any ideas?
Try flash MIUI again, then wipe cache and factory/data again. Or you can try download MIUI update again or try older version.
Wipe dalvik cache also.
And double or triple wipe before and after flash.
If nothing works, going back to froyo is the best way to start.
ezaias said:
Good afternoon
I come from the last verção ICS Cyanogen mod 5 / 12 but when I install Miui rom the phone is simply not boot or crashes when connecting my palace just after installation
Rom install Miui
-Wipe Data
-Wipe Cache
-Wipe Batery Stasta
. I have installed recovery boot menu because I have everything right Cyanogem working
After MIUI nothing works only Boot menu, Recovery,
Any ideas?
Click to expand...
Click to collapse
which ics version you come from? or have you flashed the full euro sbf? anyway,make sure you have the right kernel(ch 2.2.2) for miui.
Endless7 said:
which ics version you come from? or have you flashed the full euro sbf? anyway,make sure you have the right kernel(ch 2.2.2) for miui.
Click to expand...
Click to collapse
Brazil Retail reinstalled 2.2, I installed Recovery, boot menu, all following the posting MIUI Zip installed correctly (installation successful)
2 Wipe Data
1Wipe Cache
The phone incident is just several minutes' MIUI "and restarted it fails to complete the boot
Any comment?
Ademiro all of xda

i9505 Boot freeze/loop

Hi guys,
I'm having a weird problem. I've used a i9100 and i9300 in the past and have flashed hundreds of different ROMs, kernels and recoveries. I was running WanamLite on my i9505 until I wanted to switch to PAC Alpha 4.3. I had a few problems installing it (didn't want to go past the boot logo) but eventually with TWRP it worked. I wasn't too happy with the alpha version (freezes here and there) and switched to Omega 9 4.2.2. Installed Xposed framework, rebooted and got stuck on boot. I couldn't access the recovery immediately, first I had to remove the battery, wait and after a few tries I was in the recovery. Removing Xposed framework, wiping data, cache, dalvik cache didn't help Omega 9 to boot up. I re-installed Omega 9 and did a restart without installing Xposed framework, and it froze on boot. Same thing happened when I installed WanamLite, Echoe and Google Experience ROMs and did a restart after the successful first boot after installation.
The only way to get past this problem is to:
a) flash the pre-rooted, original Samsung MGA ROM
b) enter recovery and wipe data/factory reset
If I skip b) then it will just enter a boot loop (boot halfway, reset, boot halfway, reset...)
It's driving me crazy. I do not want to use the original ROM and have no idea what is causing this behavior. I appreciate your help.
Here the information of the working MGA ROM:
4.2.2
I9505XXUBMGA
3.4.0-1081224
[email protected] #1
JDQ39.I9505XXUBMGA
ifonuser78 said:
Hi guys,
I'm having a weird problem. I've used a i9100 and i9300 in the past and have flashed hundreds of different ROMs, kernels and recoveries. I was running WanamLite on my i9505 until I wanted to switch to PAC Alpha 4.3. I had a few problems installing it (didn't want to go past the boot logo) but eventually with TWRP it worked. I wasn't too happy with the alpha version (freezes here and there) and switched to Omega 9 4.2.2. Installed Xposed framework, rebooted and got stuck on boot. I couldn't access the recovery immediately, first I had to remove the battery, wait and after a few tries I was in the recovery. Removing Xposed framework, wiping data, cache, dalvik cache didn't help Omega 9 to boot up. I re-installed Omega 9 and did a restart without installing Xposed framework, and it froze on boot. Same thing happened when I installed WanamLite, Echoe and Google Experience ROMs and did a restart after the successful first boot after installation.
The only way to get past this problem is to:
a) flash the pre-rooted, original Samsung MGA ROM
b) enter recovery and wipe data/factory reset
If I skip b) then it will just enter a boot loop (boot halfway, reset, boot halfway, reset...)
It's driving me crazy. I do not want to use the original ROM and have no idea what is causing this behavior. I appreciate your help.
Here the information of the working MGA ROM:
4.2.2
I9505XXUBMGA
3.4.0-1081224
[email protected] #1
JDQ39.I9505XXUBMGA
Click to expand...
Click to collapse
This happens with many including me some time with many diffrnt files chainging and overwriting causes the same
Best option as u said above flash stock firmware
Then u can try what I feel will work better in ur case
Root the phone with CF root method
Flash Philz Recovery
wipe cache / dalvik / ix perm and reboot and go ahead with ur Rom flashing
Ok, flashed the stock ROM which was not rooted, then rooted using CF's method and flashed PhilZ. I couldn't find the option to fix permissions in PhilZ recovery, and went ahead with the installation of Omega 9 after wiping. I couldn't even get Omega to boot, previously it worked on the first boot and then no longer after a restart.
I don't know whats going on here.
I'm flashing the pre-rooted MGA now.
ifonuser78 said:
I'm flashing the pre-rooted MGA now.
Click to expand...
Click to collapse
Pre-rooted MGA works fine, but no other custom ROM.
I ran TriangleAway to reset the counter, but that didn't help either. No third party custom ROMs for me. :crying:
Flash latest Philz recovery.
Go to mounts and storage.
MAKE SURE YOU HAVE A ROM ON SD CARD.
Format system, cache, data and preload.
then just to be sure everything is gone I go to wipe /data factory reset and choose the wipe to install a new rom.
Then go to install zip and flash rom.
Once it's flashed you should be good to reboot.
If you're still in a bootloop then go to wipe/data factory reset but choose first option not the one to install rom.
Now reboot again, good to go!
Just a thought, if you're still having trouble flash a AOSP kernel in Philz as you might be trying to boot an AOSP rom with a TW kernel installed
Sent from my GT-I9505 using XDA Premium HD app

CWM won't install OS ROM.

How do I reboot into recovery with Super User rights ?
Every time I try to install an android OS ROM in recovery, after install I reboot in recovery the kernel and android OS resets to factory default.
But if I install a kernel it will install fine without any problems.
I'm using ClockworkMod 6.0.5.0
HELP !!!

SIXPERIENCE 7.0 BUG (please help! )

hey so i installed SIXPERIENCE 7.0 with full wipe on my g900F last day but with no good.
when it booted up everytime i got the message that the ims service is stopped so my phone is totally unusable atually
someone here's getting the same problem or could anyone provide me a fix for it?
got the latest bootloader and modem since i had no problem rnning SIXPERIENCE 5.1 on my device
thanks.
You wipe system to install a new rom?
Hi there just follow my instruction install first Philz touch 6.41.6 use that not Odin. After that wipe data, cache and dalvik wipe that. After you wipe everything going to install new Rom at factory reset. Now install sixperience 7 after that back to recovery install also tweak7. Now reboot everything is fine just install the Philz touch install 1.41.6 that is compatible to that sixperience 7. Good luck
i Install again and wipe cache and works thanks
Hi... I have the problem with playstore, when I'm asked if I want to install the apps that is back up through Google (i think) the phone boots nicely but the download from play store never starts or end.... Progress bar keeps running on all apps.
Hope u understand my explanation... And got an idea to fix

SM-G900X stuck at splash screen

hello guys,
i have a problem with my galaxy s5 live demo unit and i can install G900F roms without problems... but then i tried to change the splash screen but it didn't work... then i installed a new rom with kitkat because i wanted to change back to kitkat and the rom installed without any errors but it won't boot up because it's stuck at the splash screen so i restored from a backup i made with TWRP and it booted up fine... then i installed alexandr rom with android 6.0.1 and after that 5.0 but it doesn't seem to install any rom anymore because it's stuck on the splash screen
please help me i really want another rom that is kitkat or marshmallow
AlphaGam3r said:
hello guys,
i have a problem with my galaxy s5 live demo unit and i can install G900F roms without problems... but then i tried to change the splash screen but it didn't work... then i installed a new rom with kitkat because i wanted to change back to kitkat and the rom installed without any errors but it won't boot up because it's stuck at the splash screen so i restored from a backup i made with TWRP and it booted up fine... then i installed alexandr rom with android 6.0.1 and after that 5.0 but it doesn't seem to install any rom anymore because it's stuck on the splash screen
please help me i really want another rom that is kitkat or marshmallow
Click to expand...
Click to collapse
Yes you can
I'm using G900X running
Resurrection Remix 6.0.1_r61 for (G900F)
Pico Gapps
Boeffla Kernel
Xposed
What I did is to clean first...
Wipe Data, Cache, System, Dalvik Cache & do a Factory Reset,reboot.
Boot to Download Mode then flash Chainfire Superuser.zip using PC Odin to root.
Reboot & installed Busybox open it & install to systen/xbin done.
Turn on USB Debugging on Settings> Developer Options.
Flash Philz recovery....
Boot to recovery (Philz_recovery) then select Wipe > Wipe to install rom, after that wipe Dalvik, then flash Resurrection Remix 6.0.1_r61 v5.7.3, wipe Dalvik
Now flash Pico Gapps the wipe Dalvik...done!
Wait for it to boot it may take 5-10min

Categories

Resources