SIXPERIENCE 7.0 BUG (please help! ) - Galaxy S 5 Q&A, Help & Troubleshooting

hey so i installed SIXPERIENCE 7.0 with full wipe on my g900F last day but with no good.
when it booted up everytime i got the message that the ims service is stopped so my phone is totally unusable atually
someone here's getting the same problem or could anyone provide me a fix for it?
got the latest bootloader and modem since i had no problem rnning SIXPERIENCE 5.1 on my device
thanks.

You wipe system to install a new rom?

Hi there just follow my instruction install first Philz touch 6.41.6 use that not Odin. After that wipe data, cache and dalvik wipe that. After you wipe everything going to install new Rom at factory reset. Now install sixperience 7 after that back to recovery install also tweak7. Now reboot everything is fine just install the Philz touch install 1.41.6 that is compatible to that sixperience 7. Good luck

i Install again and wipe cache and works thanks

Hi... I have the problem with playstore, when I'm asked if I want to install the apps that is back up through Google (i think) the phone boots nicely but the download from play store never starts or end.... Progress bar keeps running on all apps.
Hope u understand my explanation... And got an idea to fix

Related

[Q] Omni Rom on FInd 5 installation fails

Hey Omni Community,
Today i tried to install the Omni Rom (omni-4.4.2-20131219-find5-NIGHTLY) on my Oppo Find 5. First i rooted the device with framaroot and then installed twrp.
Secondly i copied the rom + gapps on the phone. In twrp in cleared the cache + dalvik and tried to install the rom. But in the middle of the progress it stoped and says "fail" .
What is that and why.
regards
Fenry
Fenry Hord said:
Hey Omni Community,
Today i tried to install the Omni Rom (omni-4.4.2-20131219-find5-NIGHTLY) on my Oppo Find 5. First i rooted the device with framaroot and then installed twrp.
Secondly i copied the rom + gapps on the phone. In twrp in cleared the cache + dalvik and tried to install the rom. But in the middle of the progress it stoped and says "fail" .
What is that and why.
regards
Fenry
Click to expand...
Click to collapse
We need far more information than this... considering that none of the developers can reproduce this issue.
Also, rooting the device was completely unnecessary since you can just flash TWRP with fastboot.
I got it Fixed
i just changed to cwm and it worked.
Done it without rooting .
regards
Fenry

Cant figure out how to install custom rom, without loosing root acces

Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.

SM-G900X stuck at splash screen

hello guys,
i have a problem with my galaxy s5 live demo unit and i can install G900F roms without problems... but then i tried to change the splash screen but it didn't work... then i installed a new rom with kitkat because i wanted to change back to kitkat and the rom installed without any errors but it won't boot up because it's stuck at the splash screen so i restored from a backup i made with TWRP and it booted up fine... then i installed alexandr rom with android 6.0.1 and after that 5.0 but it doesn't seem to install any rom anymore because it's stuck on the splash screen
please help me i really want another rom that is kitkat or marshmallow
AlphaGam3r said:
hello guys,
i have a problem with my galaxy s5 live demo unit and i can install G900F roms without problems... but then i tried to change the splash screen but it didn't work... then i installed a new rom with kitkat because i wanted to change back to kitkat and the rom installed without any errors but it won't boot up because it's stuck at the splash screen so i restored from a backup i made with TWRP and it booted up fine... then i installed alexandr rom with android 6.0.1 and after that 5.0 but it doesn't seem to install any rom anymore because it's stuck on the splash screen
please help me i really want another rom that is kitkat or marshmallow
Click to expand...
Click to collapse
Yes you can
I'm using G900X running
Resurrection Remix 6.0.1_r61 for (G900F)
Pico Gapps
Boeffla Kernel
Xposed
What I did is to clean first...
Wipe Data, Cache, System, Dalvik Cache & do a Factory Reset,reboot.
Boot to Download Mode then flash Chainfire Superuser.zip using PC Odin to root.
Reboot & installed Busybox open it & install to systen/xbin done.
Turn on USB Debugging on Settings> Developer Options.
Flash Philz recovery....
Boot to recovery (Philz_recovery) then select Wipe > Wipe to install rom, after that wipe Dalvik, then flash Resurrection Remix 6.0.1_r61 v5.7.3, wipe Dalvik
Now flash Pico Gapps the wipe Dalvik...done!
Wait for it to boot it may take 5-10min

Bootloop after first restart with multiple CFWs!

Hi guys,
I have the standard note III 9005 and I had always installed CFWs on it.
I wanted to update to newer 6.0.1 Roms (had 6 roms before) but I seem to have a VERY annoying bug:
I tried to install Temaseks rom and resurrection rom but I had huge issues with it. I got bootloops although I got the newest 3.0.2.0 Team Win Recovery Project
I installed rom, GAPPS (correct version of course 6.0.1) , install rom again then delete cache and then it worked on both roms.
So a simple "install rom, GAPPS, then clean cache" didnt work. I tried to install multiple times until I got the installation! YAY! BUUUT!
Here is the fun part:
If I restarted the phone acidentally or on purpose I got stuck in a bootloop. After that the phone was unuseable again so the installation was useless.
Only solution is to completely wipe and reinstall and experiment with the order of installation until it works!
I did install STOCK rom because I was so freaked out and then went with ODIN the complete rooting guide for clean rooting, but still problem exists.
I tried two other roms but the problem was that while flashing the phone restarted automaticly and then TWRP said no installed rom? ???
Huge thanks for helping me!
New info:
I was able to make the rom work. I restarted and got stuck into bootloop!
I could boot normally after deleting dalvik cache!
But after rebooting I got into bootloop. Tried deleting cache again but this time it never booted properly.
How can I avoid by always deleting dalvik whenever I have to restart my phone (if battery dies or purpose)?
PPS: Stock Rom flash works flavlessly. I am waiting in stock rom until I find a proper solution :"(
Suggest you read the roms faqs and Q&A particularly with regard to TWRP .

Max pro m1 bootloop? Please help

Hello, so im stuck now on startup. I actually rooted my phone a week ago and everything's fine until I've downloaded some cracked apks online and restarted my phone. Please help what would i do now
imgur.com/a/07UWA4l
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Paramvir Singh said:
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Click to expand...
Click to collapse
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Never done this on my M1 but on my note edge,
When i got a bootloop, i simply reinstall stock rom, or just clean install custom rom
abcnormal said:
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Click to expand...
Click to collapse
Ok so it's good opportunity to try something new...first you need to download custom rom and gapps package to sd card (always a better option)or internal storage...do the downloads on pc or somewhere else...
1. Wipe cache, dalvik cache, system, vendor, data, internal storage(this one is optional)
2. Mount extsd card
3. Install Rom package...(i personally use xenonhd based on pie) from here https://mirrors.c0urier.net/android...tal/X00T/XenonHD-181007-Experimental-X00T.zip
You can try any other of your choice
4. Install Gapps package from here..http://download2264.mediafire.com/r0vq21tabscg/m1u4llu62bdwyos/BiTGApps-arm64-9.x.x-0.1-unsigned.zip
5. This step is optional if you want root access then flash magisk package from here..https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip and uninstall package from https://github.com/topjohnwu/Magisk/releases/download/v17.2/Magisk-uninstaller-20180921.zip ......after tge rom boot up install magisk manager from https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.0/MagiskManager-v6.0.0.apk
6. Reboot to system..first boot up will take 4-5 minutes...ENJOY
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
abcnormal said:
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
Click to expand...
Click to collapse
Stock rom available at asus website is not flashable through twrp...u need twrp flashable zip...download this file...
https://forum.xda-developers.com/showpost.php?p=77671149&postcount=83
And also decrypt file from here.... https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/mod-decrypt-data-t3787311
After flashing the rom...flash decrypt zip
And remember to wipe internal storage after flashing these two zips!
Hello sir i got stuck in bootloop in asus max pro m1
Actually its not showing anything screen is blinking as i try to turn it on. I was on custom rom and suppose to install stock rom and i followed every step but my phone doesn’t start its just reboot and nothing displays anything. Please can anyone tell me the solution of this issue.
did u solved issue
how did u soolves issue ??

Categories

Resources