Database Users

Bluetooth Streaming Audio from Pandora to Car skipping

unfortunately when i connect bluetooth to my car radio the music skips about every 15 sec. very annoying. Anyone else having the problem.
I have an iphone 3gs that doesnt skip and works great. I love the Evo but bugs are continually showing up.

Its your internet. Try updating your prl.

i did update the prl before i tried it.
still does it.

I have a bluetooth reciever for my AVR and I noticed some skipping as well. Not as frequent as you are saying but if I moved more than 10' away it would be rather bad. The Bluetooth range seems to be poor. In a car I can't imagine you having a problem. I have heard of some issues with factory bluetooth.

I had same problem till I decided to turn off my wifi.. and it started working fine.. it just doesn't have to do with Pandora, its will any Music that you stream over Bluetooth..
Just turn off your wifi and it will work fine.
Thanks

Or just place your phone somewhere else in your car. Bluetooth has very lousy range (isn't it like 10 feet in perfect conditions?), and as such moving it a foot or two somewhere else could make a world of difference.

Its definitely not the internet. I could be at home in wifi with phenominal internet it even laying it off of my SD card. If im in a vehicle or on a bus, its pretty solid and works really well. I walk out the bus and walk around either to m next bus or to work and it fails to play for more than 4 seconds without skipping. And its not like a short, nuisance of a skip. It often stays skipped for up to 3 seconds at a time. Completely unusable. Happens however i connect my phone to any a2dp device. Tried tweaking the /etc/Bluetooth/audio.conference file as suggested in a couple nexus one/s sites, but unfortunately seems to be specific to those phones. This is making me hate this phone. Every other phone I've had in the past two years does this just fine. Whyis it having such a hard time with such a simple task that others have done perfectly? Even other Roms work better but i like also better than sense anyday. Maybe its a kernel issue?. I really want this fixed. But it seems like no one is even trying to work towards a solution. Not on the surface anyway.

Did you try turning off your wifi and any other unneeded services? The only time I have had skipping over bluetooth is when I have my wifi on as well, other than that it streams smoothly through my car stero and computer over bluetooth.

TechniShawn said:
Did you try turning off your wifi and any other unneeded services? The only time I have had skipping over bluetooth is when I have my wifi on as well, other than that it streams smoothly through my car stero and computer over bluetooth.
Click to expand...
Click to collapse
This.
If that doesn't help, then if possible, you should use an aux in cable to prove it's only a bluetooth issue. If it still skips, I'd try a new rom and/or kernel. A2DP performance seems much improved in CM7 compared to Sense roms.. or at least it seems better to me.

I've had the same skipping problem with my bluetooth earphones and evo. The only slight solution that I've had was holding the phone in direct line of site with the bluetooth earphones. When I do that, it doesn't skip as much.

Streaming bluetooth audio to car stereo
Thanks Anku13, your fix works. Just installed a Clarion CZ501 bluetooth receiver in my car, experienced skipping audio every 15 - 30 seconds once my Leo connected/streaming. Killing WiFi was the trick. Love not having an AUX cable lying around in the cabin.

Bluetooth Skipping

I just got this phone yesterday and so far I'm still on the fence about keeping it. I just came from a Nexus One and I miss 2.2 severely but I can manage to wait another 30ish days.
To the point of this post...
I have a bluetooth radio in my car which I connect my phone to and play all of my music. On the way to work this morning I Connected the Vibrant (for the first time) and the audio was dropping out. It happened randomly and sometimes for 1-2 seconds. I've been using my N1 for BT and I've never had a problem.
I've searched Google and I haven't found anything for the Vibrant.
Anyone else experiencing this?

I had this issue and turned off wifi and it went away. I think it only happens when you have wifi enabled but it isn't connected to an access point. Maybe it is from perodic wifi scanning to find an access point.

dumbestcrayon said:
I just got this phone yesterday and so far I'm still on the fence about keeping it. I just came from a Nexus One and I miss 2.2 severely but I can manage to wait another 30ish days.
To the point of this post...
I have a bluetooth radio in my car which I connect my phone to and play all of my music. On the way to work this morning I Connected the Vibrant (for the first time) and the audio was dropping out. It happened randomly and sometimes for 1-2 seconds. I've been using my N1 for BT and I've never had a problem.
I've searched Google and I haven't found anything for the Vibrant.
Anyone else experiencing this?
Click to expand...
Click to collapse
I hear you. Same story regarding 2.2. Still waiting though...
Regarding bluetooth, I can connect without problems to my Genesis Coupe 2010, whether WiFi is ON or OFF. As a matter of fact, I have all WiFi, BT and GPS ON all the time. I have not experienced any difficulties with the audio. This applies to the car/phone functionality, as my car does not support the audio streaming profile.
I'm on my second Vibrant, since I exchanged the first one due to a rattling volume key. The first one had trouble connecting to the car and I thought it was because of 2.1 (Nexus with 2.1 never connected to my car, it did just after 2.2)
One thing I did before attempting to connect to the car was a factory reset. I did it because I started to play with the GPS settings and wanted to go back to factory condition. I mention this because maybe the first one would have connected if I had done a reset to factory as well, but that I'll never know!
My phone is not rooted or modified in any way. No task killers, or anything extraordinary installed.

I have the same problem with my Vibrant. And I had the problem with the G1 as well. There's a defect out there for this (can't recall the number). The problem is with Android.

You can try this.
"Default [FIX] Fix poor AAC streaming performance (Pandora, Slacker, etc) on Froyo
When I installed Froyo on my N1, I found that streaming quality over Pandora suffered tremendously; low-quality was unbearable, and high-quality sounded worse than low-quality normally does. The change to StageFright from OpenCore is to blame here, while it improves HTTP streaming, it's AAC decoder doesn't decode LC-AAC streams properly.
To disable it temporarily, use
Code:
adb setprop media.stagefright.enable-player false
and restart any applications actively playing anything. To disable it permanently, pull build.prop from /system and change the value there. When you restart, it should be disabled; use adb getprop to verify.
Of course, the phone needs to be rooted for this to happen, as r/w access to /system is required.
Last edited by cnunez1987; 27th July 2010 at 12:18 PM.."
One other side note: this change also appears to fix the bluetooth "skipping" issue that appeared in 2.2 as well.
I got this from a post entitled "[FIX] Fix poor AAC streaming performance (Pandora, Slacker, etc) on Froyo" on the nexus one forum.

lpaddikt said:
You can try this.
"Default [FIX] Fix poor AAC streaming performance (Pandora, Slacker, etc) on Froyo
When I installed Froyo on my N1, I found that streaming quality over Pandora suffered tremendously; low-quality was unbearable, and high-quality sounded worse than low-quality normally does. The change to StageFright from OpenCore is to blame here, while it improves HTTP streaming, it's AAC decoder doesn't decode LC-AAC streams properly.
To disable it temporarily, use
Code:
adb setprop media.stagefright.enable-player false
and restart any applications actively playing anything. To disable it permanently, pull build.prop from /system and change the value there. When you restart, it should be disabled; use adb getprop to verify.
Of course, the phone needs to be rooted for this to happen, as r/w access to /system is required.
Last edited by cnunez1987; 27th July 2010 at 12:18 PM.."
One other side note: this change also appears to fix the bluetooth "skipping" issue that appeared in 2.2 as well.
I got this from a post entitled "[FIX] Fix poor AAC streaming performance (Pandora, Slacker, etc) on Froyo" on the nexus one forum.
Click to expand...
Click to collapse
Stagefright isn't in Eclair, It's in Froyo and Pandora has already updated to fix this issue [for me anyway].
I'll try switching off Wifi and seeing if that helps. Thanks for the replies.

I'm having the same issue with my jabra halo headset. It's quite annoying. OP please post if you find a good solution.
Sent from my SGH-T959 using XDA App

make sure nothing is blocking or touching the back of the device, this is where the antenna is located. The ' skips ' you get is when your devices can't find each other... and when they do re connect , you hear a change in the pitch of your music... this is not skipping just a signal block.. if you want to confirm, download the logcat app from the market.. and there you will be able to see what is happening when you get a ' skip '..
hope this helps...

This happens to me as well when trying to connect to my Sony headunit via bluetooth.. Its not skipping.. The music just cuts out for a second or two randomly...I have tried using a mxzing and the standard music player, but it still skips out every once in a while....I will try turning of wifi to see if that helps...
I can use the bluetooth for phone conversations and it works fine with no skipping... I can plug the phone into the head unit via the headset jack and it works great with no skipping... It is only when attempting to listen to the music player through bluetooth that it skips!

Even if you get it to stop skipping the quality is so poor its not worth listening. Broken GPS, compass, and bluetooth, fix this Samsung!
Sent from my SGH-T959 using XDA App

chadti99 said:
Even if you get it to stop skipping the quality is so poor its not worth listening. Broken GPS, compass, and bluetooth, fix this Samsung!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
My audio sounds great... it just randomly skips....compass sucks though

iflyabeech said:
My audio sounds great... it just randomly skips....compass sucks though
Click to expand...
Click to collapse
Try swapping between aux and bluetooth on your phone and you'll know what im talking about. On second thought, maybe you shouldn't if it sounds okay to you now .

techspy said:
I had this issue and turned off wifi and it went away. I think it only happens when you have wifi enabled but it isn't connected to an access point. Maybe it is from perodic wifi scanning to find an access point.
Click to expand...
Click to collapse
This was the same problem I had. My music was constantly skipping when I listened to music at work. I thought it might have been the stock music player, so I downloaded MixZing (which I actually prefer now) and had the same problem. At first, I though it was the bluetooth on my phone...but sometimes it would play fine all night long without any issues. I started restarting my phone before playing music, thinking the OS just had some minor memory management issues. Finally, I realized that I was leaving my WIFI on when I left my house. I use WIFI at home and have never had skipping issues with my music. When the WIFI is on, and I'm not in range of a router, I think the skipping almost certainly happens when the phone polls for new connections.

Bluetooth audio and Android 4.2

Updated my tablet to Android 4.2 this morning and afterward watching video with Bluetooth headphones it's skipped popped and just been generally awful. Curiously music works fine. Anyone else experiencing this?
Sent from my Nexus 7 using Tapatalk 2

I just tried a few mp4 clips and didn't experience any skips/lag. Can't try avi right now as mx player doesn't work in 4.2 However, it seems there has been some changes to bluetooth. If you have your volume loud enough you can hear it 'stop' using the bluetooth if idle for a couple of seconds. Never heard that before. Also, a bug that really irks me is latency with bluetooth in games. Previously, games like dead trigger would seem to lag well over a second behind, almost 2 seconds. Now it's about .5 of a sec, however it's skips,scratches etc.
Other games fair better. For example, mame has about .5 of a second where it exhibited the 2 second lag previously. Not nearly as many skips as dead trigger but I heard a couple.
Btw, is android the only platform that has this issue? I read old posts of ipad's/iphones having it back in 2009 but I believe they fixed it. My friend has a playbook and it didn't support bluetooth stereo profile (ad2p) but they released an update last year and it works perfectly. I tried a few games on his device and none of them exhibited any lag, scratchiness etc. So RIM gets it right the first time and google has had this issue on all their devices for years? There's a few bugs filed on this on the official google bugs forum opened in 2009 and no response from any developer.
EDIT:
Just tried youtube with bluetooth stereo headset, audio breaking up, stops/starts. It seems to be going quiet if there is even a moment of silence in the video. God damn it, I use this all the time and now it's unusable. This was at least one thing that worked fine with bluetooth. It could be my connection right now but I highly doubt it. I'm at home and this connection is always fine, this is the first time I've experienced this. I bought this headset for gaming, videos, and voip. Voip didn't work because bluetooth mics are basically non-usable in android, gaming has lag, and now videos won't play properly. I think it has to do with using the wifi at the same time with videos as videos downloaded from youtube are fine.

Yep this mimics my issue. Streaming anything results in choppy playback over Bluetooth. This really is not acceptable to me, and its hurting my view of my nearly brand new Nexus 7. I really hope we see another OTA seeing as I can't very well turn WiFi off on a device that relies on WiFi.
Sent from my Nexus 7 using Tapatalk 2

I have the skipping too with Pandora over blue tooth, but thought it might be Wi-Fi limit since I am tethering off my rezound which is playing flawlessly over BT. It was skipping as pictures loaded in emails.
Sent from my Nexus 7 using xda app-developers app

nolig2278 said:
I have the skipping too with Pandora over blue tooth, but thought it might be Wi-Fi limit since I am tethering off my rezound which is playing flawlessly over BT. It was skipping as pictures loaded in emails.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It isn't WiFi bandwidth related as far as I can tell. I can buffer a video, play it, and still the audio flips out. This is just disappointing and sad on Google's part now. The same issue affects the Galaxy Nexus, as well. Did no one even bother to test this before it rolled out??

I've been having the same problem since the 4.2 update - the bluetooth issue is definitely linked to wi-fi (no skipping on downloaded video while wi-fi off; skipping as soon as I turn it on). Online bluetooth streaming of any audio whatsoever is basically ruined.
I thought maybe changing the channel on my router would to the trick, but no dice. Google was very sympathetic over the phone but completely unhelpful - "this is the first we've heard of this."
I've only been an android user for a few months. Are they usually pretty good about addressing stuff like this?
- Nexus 7 stock.

bluetooth now working
My bluetooth headset (Samsung) was stuttering the other day as many people are reporting. I did play around with the settings and at this point I have no idea why, but it is working fine.
I had done 2 things:
1. I unpaired every device and re-paired them
2. On the wifi advanced settings, I set it to never sleep and disabled battery optimization
Bluetooth then worked fine using Pandora and TuneIn radio. I changed the advanced setting back to optimize battery and all still works.
Now extremely happy with 4.2 but baffled as to why it now works.

I am going to test more but I read it from someone else and it seems to have helped me, is to disable gps. Others said it didn't work for them so maybe it depends on the bluetooth device as well. But with gps disabled youtube no longer lags/skips and stays in perfect sync, but I'm going to test more.
And with gaming, it's almost in perfect sync, however some games still skip a bit and some lag more than others (mame4droid seems to lag the most). Whereas before 4.2 all games had almost 2 seconds delay in audio.
So in some ways, bluetooth is actually better in 4.2 in that they seem to be closer in getting the lag in realtime apps (games) working. So I hope their fix is not to simply revert to 4.1.2 bluetooth.
Anyway, try disabling gps, it may work for you.

To all those who are trying to use Wi-Fi & Bluetooth, Good luck!
They both work at 2.4ghz frequency most of the time you will only able to use one. Unless you're around 5ghz wi-fi.
I got lag and werid things when my music player (Play Music) tried to play .avi file

It is not BT that is broken in 4.2!!!
First of, 4.1 was working fine with my BT audio, got the OTA update and it was still working fine after first reboot... couple of days later mine started to act up...
It was almost impossible to listen to BT audio... but BT is not the problem!!!
It is either the Audio Effects service/program or Google Music... easy to test...
Connect the BT audio device, go into settings, apps, running stop the Google music service, stop the audio effects thing... BT audio does not skip at all anymore... It is as flawless as it was in 4.1... so the BT is not broken i any way... it is either the audio effects service or the Google music stuff...
I hope someone will fix it... but it is not BT that is bugged...

Marshmallow 6.0 bluetooth headphone problems

headphones: beats studio wireless
2.4ghz band stopped working when headphones are connected
-temporary solution: switched to 5ghz band. no issue
netflix would buffer to 99%, audio would start playing but screen was still buffering
-temporary solution: turn off headphones, let video play, turn headphones back on
kodi, hulu and youtube worked fine.
overall i was pretty happy with my experience. im most proud to say that the nexus player is not plagued with the audio lag that come with other devices.

I've had issues with BT headset quality too, since trying post Marshmallow update.
It would have of course been best, if there was a headphone jack in the remote, like Roku and Nvidia Shield have.
It seems the use of a BT headset, somehow puts a burden on the overall Wifi connection of the device, or something. Given you found 5Ghz works better. With Roku and Shield, the headphone jack works great no matter the connection, if you can get it to play on the TV, it will play with no issues via the wireless headphone jack of Roku and Shield.
I don't know why Nexus Player BT headset audio is so unstable. But it's disappointing. That the claimed benefits of Marshmallow for the Nexus Player, are found to be less than stellar once put to use.

Showtime_III said:
headphones: beats studio wireless
2.4ghz band stopped working when headphones are connected
-temporary solution: switched to 5ghz band. no issue
netflix would buffer to 99%, audio would start playing but screen was still buffering
-temporary solution: turn off headphones, let video play, turn headphones back on
kodi, hulu and youtube worked fine.
overall i was pretty happy with my experience. im most proud to say that the nexus player is not plagued with the audio lag that come with other devices.
Click to expand...
Click to collapse
Thanks I was looking for a fix or workaround for that issue with netfilx. My workaround was just to cast from my tablet or phone. A little annoying as sometimes I don't have my tablet or phone around.

Showtime_III said:
netflix would buffer to 99%, audio would start playing but screen was still buffering
Click to expand...
Click to collapse
I just got the OTA update to 6.0 and yes, while I was thrilled to get bluetooth headphone capability this problem with Netflix takes the fun out of it. I'm not convinced it's really buffering, I think it's just refusing to switch to the video framebuffer output for some technical reason when the bluetooth audio sink is selected, so the buffering spinner never goes away.
-temporary solution: turn off headphones, let video play, turn headphones back on
Click to expand...
Click to collapse
It's surprising how well this works in terms of being consistent and repeatable (usually these kinds of tricks result in hanging or crashing if you use them more than once), but unfortunately it only works until you have to use the UI to skip or even pause, then it's gone and you have to do it again.
Update: There is also a bluetooth audio problem with Kodi under 6.0: While UI sounds and at least some local files play back fine with bluetooth audio, in certain other streams, including all the YouTube videos and World News Live channels I tried, bluetooth audio is absent unless you do the above trick where you connect the bluetooth device after it starts playing.
The symptom is almost the exact opposite of what you get with Netflix in that, unless you do this trick the video streams but the audio doesn't, where in Netflix the audio streams but the video does not appear.

It's also pretty ridiculous that there is no way to disconnect a bluetooth device from the Nexus side, which means that once it's paired, the headset will connect to the player whenever you turn it on. Which is irritating if you have other devices you want to use it with, like phones and tablets -- all of which do let you disconnect a bluetooth device without unpairing or turning bluetooth off.

Samsung S8 Crackling Bluetooth audio and Bluetooth Codecs

Hi Guys.
I've seen a number of posts on this subject so here's my story and my experience thus far.
I've been using an iPhone 7 since it came out. I've been very happy playing music in my car (Fiesta with SYNC2 system) all this time. My significant other has been using an S8 for some time, and her music always sounded 'crackly' (for lack of a better word) in the car. I thought this was just her Spotify or something.
2 Days ago I bought my own S8 and I had exactly the same issue.
Now from some research I've been able to deduce that this is down to the Bluetooth Codec the phone uses. I changed mine to aptX yesterday and the music quality was great. Didn't sound like a 200KB MP3 downloaded in the early 2000's anymore.
However...
Last night I had to reboot my phone for reasons, and the developer options reset completely, which I believe is normal behavior. But now I can't set my Bluetooth Codec anymore? I change it, the moment I close the menu, it reverts back to SBC. I tried this with Bluetooth off, Bluetooth on and not connected, Bluetooth on and connected, no joy. It keeps reverting. Same goes for all the other Bluetooth settings (i.e bitrate).
So gentleman I ask you humbly, wtf? Why does the settings not stick and is this normal behavior? Is there a way I can force it to use AAC or aptX once more? I really have come to enjoy this phone but playing music in my car is a very very big factor and since AUX and USB (can't seem to play Apple Music/Google Music via USB) isn't an option, I'm stuck with Bluetooth.
Thanks in advance,

Have you made sure dual audio is disabled???
If not, go to Bluetooth, turn it on, hit the tripple dots in the top right and tap on "Dual Audio"
Make sure it's off and now try changing to AptX or whatever codec works best for you.
Disable / re-enable Buetooth and see if it sticks. (Try rebooting too)
Also, Bluetooth codecs will automatically change if the device you're connecting to doesn't support your choice of codec.
Keep me posted

CoreyOS said:
Have you made sure dual audio is disabled???
If not, go to Bluetooth, turn it on, hit the tripple dots in the top right and tap on "Dual Audio"
Make sure it's off and now try changing to AptX or whatever codec works best for you.
Disable / re-enable Buetooth and see if it sticks. (Try rebooting too)
Also, Bluetooth codecs will automatically change if the device you're connecting to doesn't support your choice of codec.
Keep me posted
Click to expand...
Click to collapse
Hi Corey,
Thanks for the response. Unfortunately, the above didn't work Dual audio was disabled, I enabled it and disabled it again. I tried changing the codec and bit rate but the result is the same, the moment I close the menu or turn on Bluetooth, it reverts back to SBC and Best Effort bitrate. I should mention that when I turn on the Bluetooth, it doesn't connect to anything, the only paired device at this point is my car.
Interestingly enough, if I don't close the menu but just hit the middle button, the settings will stay as is and the audio is great. What I haven't tried yet is closing the menu after a 'good' connection is made to the car. It may be that the setting sticks but the menu says otherwise. But I can definitely confirm that if I close the menu and then connect, the audio is garbage.
As for the compatibility of the car's Bluetooth, well it's a Ford SYNC2 system which from what I can see is actually quite basic. I am starting to this the problem isn't as much the codec, but rather the bitrate at which the phone is playing/sending music across the Bluetooth.

dxcza said:
Hi Corey,
Thanks for the response. Unfortunately, the above didn't work Dual audio was disabled, I enabled it and disabled it again. I tried changing the codec and bit rate but the result is the same, the moment I close the menu or turn on Bluetooth, it reverts back to SBC and Best Effort bitrate. I should mention that when I turn on the Bluetooth, it doesn't connect to anything, the only paired device at this point is my car.
Interestingly enough, if I don't close the menu but just hit the middle button, the settings will stay as is and the audio is great. What I haven't tried yet is closing the menu after a 'good' connection is made to the car. It may be that the setting sticks but the menu says otherwise. But I can definitely confirm that if I close the menu and then connect, the audio is garbage.
As for the compatibility of the car's Bluetooth, well it's a Ford SYNC2 system which from what I can see is actually quite basic. I am starting to this the problem isn't as much the codec, but rather the bitrate at which the phone is playing/sending music across the Bluetooth.
Click to expand...
Click to collapse
I'm not gonna' lie, I'm not very impressed by the Bluetooth on the S8... or Bluetooth in general.
It's lousy most of the time, mine always distorts and especially around emergency vehicles... (Could be interference from their coms???)
If possible, just stick to good 'ol copper wire
I can't imagine wireless audio not ever being interfered with and will always stay wired.
Also, try a music app called Poweramp.
It has many settings involving latency etc. It has a trial for 2 weeks and is worth EVERY penny if you decide to buy IMHO.
Try the build version first, if that doesn't have settings that you need, try the alpha version.
It has lots of latency settings etc
I'm guessing higher latency = better results as it has more time to be pushed over BT before the sound is reproduced.
I'm probably wrong though.
Can't beat lots of settings tho aye.

CoreyOS said:
I'm not gonna' lie, I'm not very impressed by the Bluetooth on the S8... or Bluetooth in general.
It's lousy most of the time, mine always distorts and especially around emergency vehicles... (Could be interference from their coms???)
If possible, just stick to good 'ol copper wire
I can't imagine wireless audio not ever being interfered with and will always stay wired.
Also, try a music app called Poweramp.
It has many settings involving latency etc. It has a trial for 2 weeks and is worth EVERY penny if you decide to buy IMHO.
Try the build version first, if that doesn't have settings that you need, try the alpha version.
It has lots of latency settings etc
I'm guessing higher latency = better results as it has more time to be pushed over BT before the sound is reproduced.
I'm probably wrong though.
Can't beat lots of settings tho aye.
Click to expand...
Click to collapse
Morning Corey,
Yeah so my situation at the moment is to have my old iPhone in the car at all times as a glorified bluetooth player. I've also gone out and bought an auxiliary cable for when the iPhone's battery dies on me (happens more often than one would think). And to have a charger for the iPhone, charger for the Samsung and aux cable for the Samsung all plugged in becomes really messy.
It must be something to do with the Bluetooth 5 feature. I don't know what version the iPhone is (cba to check) but it works like a dream.
Wish we had some form of backwards compatibility or a feature to force an older version with Samsung. Just sucks buying a phone which is really not cheap in ZA just to have the music sound like a 300kb MP3 played on Winamp with the treble bars turned up all the way.
I'll try out the app you suggested mate, thanks!

dxcza said:
Morning Corey,
Yeah so my situation at the moment is to have my old iPhone in the car at all times as a glorified bluetooth player. I've also gone out and bought an auxiliary cable for when the iPhone's battery dies on me (happens more often than one would think). And to have a charger for the iPhone, charger for the Samsung and aux cable for the Samsung all plugged in becomes really messy.
It must be something to do with the Bluetooth 5 feature. I don't know what version the iPhone is (cba to check) but it works like a dream.
Wish we had some form of backwards compatibility or a feature to force an older version with Samsung. Just sucks buying a phone which is really not cheap in ZA just to have the music sound like a 300kb MP3 played on Winamp with the treble bars turned up all the way.
I'll try out the app you suggested mate, thanks!
Click to expand...
Click to collapse
No worries and if you are referring to a USB cigarette lighter charger/USB charger then try the multi-cables.
Try one of these: https://www.amazon.co.uk/Poweradd-L...coding=UTF8&psc=1&refRID=59QBSADVWM0NKGZGTQ4K

sorry to drag up an old thread, i have the same problem ( sync2 too) and it is same issues. I have noticed that even though its bad its tolerable bad. then i add my samsung watch and becomes awful.
did you ever figure the issue out? i feel its the sync2 causing some kind of problem

ninjatiger26 said:
sorry to drag up an old thread, i have the same problem ( sync2 too) and it is same issues. I have noticed that even though its bad its tolerable bad. then i add my samsung watch and becomes awful.
did you ever figure the issue out? i feel its the sync2 causing some kind of problem
Click to expand...
Click to collapse
I dont know yet I have been using my s8 and bluetooth audio for watch speakers controllers everything and today for the first time my speaker was crackling under bluetooth
I will most def be trying to recreate this and figure it out cause it was very iratating...