Hello!!
I don't know anybody asked this question or not.
Right now I have a midNIGHT Rom. If I'll backup everything trough the Clockwork mode recovery and then try to flash different ROM. Mammon Bonsai4all Rom as example. After I'll do recovery from previous ROM will it work or not?
And what I need to do in this case?
I'm sorry for my language (English is not my original) but I hope you understand what I wanted to ask.
Thank you.
Correct me if I'm wrong. You have midnight rom and you want to flash bonsai rom. So your gonna do a backup thru clockwork mod and then flash the bonsai rom. Yes it will work but make sure you wipe after you do your backup and before you flash the new rom. Also make sure you stay on the same android version for the rom.
Thank you! You understood me right.
Thanks again.
If you back up, wipe, flash bonsai, do advanced data restore, then flash bonsai again ontop of the restore it helps with most of the hickups.
Hi Guys,
I'm a little new to all this so please bear with me..
Just rooted my MT4g and want to make a nandroid backup before i do anything. However i see that i need to use CWM to flash a custom recovery image in order to make the backup.
Is there anyway to reverse that recovery image back to stock? Incase i need to revert the phone completely back to stock...
Thanks.
Sorry, i think i found it!
I'm guessing this is it: http://forum.xda-developers.com/showthread.php?t=843289
Please close this thread if that's it.. sorry for spamming.
If you completed the root process then you already have CwM recovery. Just use Rom Manager to make a backup. If you have to revert back to stock the process will reinstall the stock recovery img for you.
shortskoolbus said:
Hi Guys,
I'm a little new to all this so please bear with me..
Just rooted my MT4g and want to make a nandroid backup before i do anything. However i see that i need to use CWM to flash a custom recovery image in order to make the backup.
Is there anyway to reverse that recovery image back to stock? Incase i need to revert the phone completely back to stock...
Thanks.
Click to expand...
Click to collapse
Hmm okay. I did successfully root the device and I was following this write up to backup the phone using nandroid which says i need to flash a custom recovery ROM.
I just tried to backup current ROM and it gives me a message saying i must flash CwM recovery first and gives me an option to install it. But i'm guessing it's possible to restore that from the link in my second post?
You can use clockwork to restore your factory rom, but if you want to revert your recovery back to stock you will need to fastboot flash the stock recovery back on. This is assuming you have first flashed the stock rom which will leave you without clockwork rom manager installed. There's a few unroot guides that will help you if you need to send your phone back to tmo. I would suggest becoming familiar with ADB and Fastboot. That knowledge will give you more options in a pinch.
Swyped on my rooted MyTouch4G
Thanks much!
Yes i am doing a lot of reading right now, but wanted to make sure all the files i needed were out there for the MT4G already. Looks like the factory recovery is out there and it can be flashed back so i'm not to worried.
shortskoolbus said:
Thanks much!
Yes i am doing a lot of reading right now, but wanted to make sure all the files i needed were out there for the MT4G already. Looks like the factory recovery is out there and it can be flashed back so i'm not to worried.
Click to expand...
Click to collapse
Yes all the files are out there that you would need to pretty much do whatever needed. Check out the links in my sig for some good things.
does it matter what base firmware your on when flashing the stock nandroid backup found on the dev thread? like if im on gingerbread will restoring that 2.2.1 backup work or cause a brick? I had a samsung vibrant before, and when i restored a backup from a different version of android firmware it bricked and i had to use a pc software to flash factory firmware. anyone went from cm7 back to stock? also in the thread it says you have to flash a recovery image again.
csdalporto said:
does it matter what base firmware your on when flashing the stock nandroid backup found on the dev thread? like if im on gingerbread will restoring that 2.2.1 backup work or cause a brick? I had a samsung vibrant before, and when i restored a backup from a different version of android firmware it bricked and i had to use a pc software to flash factory firmware. anyone went from cm7 back to stock? also in the thread it says you have to flash a recovery image again.
Click to expand...
Click to collapse
You have to use the correct recovery image. YES. 2.x images will only work with 2.2 ROMs and 3.0.0.5 will only work with 2.3 ROMs. However there is 3.0.0.6 that will work with both 2.3 and 2.2 ROMS. I have links in my signature for that recovery image. I would highly suggest flashing that recovery image prior to flashing back to 2.2.x.
I just rooted my girlfriend's year old fascinate that was bone stock from day 1. In CWM I am unable to make a nandroid (I get an error). I've heard I need a modded stock kernel in order to successfully make a backup in CWM 3.x or something along those lines.
I looked in the developer forum under the sticky with the list of everything, but it only shows three or so kernels (none of which hint at stock).
I have a Thunderbolt and before that a Droid 2 so I know a lot about rooting and flashing with those two devices, but I am new to the Fascinate. I messed around a bit with Odin when I rooted the phone, but I'm still learning.
Any help is greatly appreciated.
Older recoveries supported amend scripting (2.x.x) while newer ones support edify scripting (3.x.x)...depending on which rom your running it may cause problems with backups and restores if you don't have the right recovery...unless you plan on going to an Mtd build (cm7, Miui, ect) I would recommend using the (2.5.1) recovery also called the 3/30 fix all recovery because this version supports both amend and edify scripting..so you make a nandroid with out issues....if you can get to recovery still I would install this zip and then select reboot recovery...it will bring you to the 3/30 fix all recovery where you should be able to backup and restore your nandroid...link to follow shortly...
Scroll down in the first page to the .zip file, download and continue with the steps I listed...I know its confusing at first mainly because development has happens rather quickly which is a good thing! its just a lot to catch up on!
http://forum.xda-developers.com/showthread.php?t=942021
Sent from my SCH-I500 using XDA App
What would you recommend if my plan was to install MIUI or OMFGB?
I'm deciding between those two because I use OMFGB on my Thunderbolt all the time, but MIUI is very good for my girlfriend I think because it's very straight forward and simplistic.
http://forum.xda-developers.com/showthread.php?t=1124391
Its not hard to get in to these roms, but you must be sure if you have problems or want to go to anything non Mtd you will have to Odin an official VZW tar and pit file to repartition before going to any non Mtd rom
http://forum.xda-developers.com/showthread.php?t=1124391
Sent from my SCH-I500 using XDA App
So basically:
1. Flash the CWM you posted in your original reply
2. Nandroid her current stock setup
3. Flash MIUI
4. If I ever want to return to stock or a non-mtd rom I have to do what's posted in your second reply?
If all that is correct please let me know. Also lets say she doesn't like MIUI, can I simply flash that nandroid or will I have to do what's posted in the second reply?
When I try to flash that older CWM in CWM I get this message:
http://i.imgur.com/3QiwQ.jpg
want a droid said:
So basically:
1. Flash the CWM you posted in your original reply
2. Nandroid her current stock setup
3. Flash MIUI
4. If I ever want to return to stock or a non-mtd rom I have to do what's posted in your second reply?
If all that is correct please let me know. Also lets say she doesn't like MIUI, can I simply flash that nandroid or will I have to do what's posted in the second reply?
Click to expand...
Click to collapse
Yes you will have to do what's in the second reply.
You have it all correct, if you nandroid her current stock setup you can only restore it on a non Mtd build you would have to do what I linked to in the second post to use a vzw rom with pit file to repartition...boot fully, flash recovery then you could restore her stock nandroid..for example you get her on Miui you can only do a nandroid with the recovery that comes with it...I think its a 4.x.x recovery...trying to restore the stock nandroid before repartitioning back to stock will cause problems...so basically you only want to restore a nandroid on the same build (Mtd to Mtd nandroid, or ext4/rfs to ext4/rfs nandroid) and if all else fails and you run into big problems, doing the VZW restore (although can be a lengthy process) will get the phone back running to start over!
Sent from my SCH-I500 using XDA App
Did you see my reply before this? I was unable to get CWM 2.x to flash so I'm still on CWM 3.x.
want a droid said:
Did you see my reply before this? I was unable to get CWM 2.x to flash so I'm still on CWM 3.x.
Click to expand...
Click to collapse
I did see it after I replied, is her phone on ed05? I'm surprised that neither the 3/30 fix all or 3.x.x is working
Edit after looking at the pick again you're using times infinity's recovery....you would need to Odin the 3/30 fix all recovery and immediately three finger boot into recovery without letting the phone boot or if you installed the 3/30 fix all via .zip file, you need to choose reboot recovery to enter the fix all one, it should be 2.5.1 I believe
Sent from my SCH-I500 using XDA App
Here's a picture of her phone info:
http://i.imgur.com/rs1Jd.jpg
And as you can tell from the other photo, both making a backup and flashing the CWM 2.x doesn't work.
Trying a backup results in: "Error while backing up boot image!"
Trying to flash CWM 2.x results in that long information message.
That sucks man i'm sorry I've never been on ed05 so I don't know if that why your having problems my suggestion...back up all her contacts by exporting them to sd card, download titanium backup its free in the market, backup all of her apps and screw the nandroid, flash what you want, restore her apps with titanium, but do not restore data, restore get contacts and then boot into the recovery that comes with the rom/kernel and then do a nandroid and that WILL work..again sorry for the trouble, just trying to help.
Sent from my SCH-I500 using XDA App
I appreciate all your help. I'll let you know how it goes.
ed05 is not the problem...You have to use cwm 2.5.1.x if your trying to nandroid backup a stock rom. This version of cwm works on all froyo roms and powerwashed gingerbread. After you make a nandroid with cwm2.5.1.x, then flash cwm4 and proceed to installing miui.
Read this link for flashing mtd based roms such as miui, cm7, vgb...etc
http://forum.xda-developers.com/showthread.php?t=1212239
That was my first reply to him...to use 2.5.1 but he said he still got errors? I don't have a clue what the problem is...he's said he's used ti's 3x.x, and the 3/30 fix all still with errors? confused?
Sent from my SCH-I500 using XDA App
droidstyle said:
ed05 is not the problem...You have to use cwm 2.5.1.x if your trying to nandroid backup a stock rom. This version of cwm works on all froyo roms and powerwashed gingerbread. After you make a nandroid with cwm2.5.1.x, then flash cwm4 and proceed to installing miui.
Read this link for flashing mtd based roms such as miui, cm7, vgb...etc
http://forum.xda-developers.com/showthread.php?t=1212239
Click to expand...
Click to collapse
I guess you skipped the entire thread, but we already went through all that.
want a droid said:
I guess you skipped the entire thread, but we already went through all that.
Click to expand...
Click to collapse
I think you skipped a step... Are you flashin cwm via the PDA function in ODIN?
If not you need to:
ODIN the cwmAll.tar here: http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1238070&v=1&libid=1316306736482&out=http%3A%2F%2Fwww.mediafire.com%2F%3F6x5utoca59et7o9&title=%5BGUIDE%5D%20Installing%20a%20rom%2F%20cwm%20recovery%2F%20or%20going%20back%20to%20stock%20for%20NEWBIES!%20-%20xda-developers&txt=http%3A%2F%2Fwww.mediafire.com%2F%3F6x5utoca59et7o9&jsonp=vglnk_jsonp_13163071702031
make a nandroid back up of the stock rom.
go back to odin and flash the jt's cwm4
boot into recovery
wipe data, cache, dalvik
install miui.zipfrom sd card
Follow the rest of the directions in the link I provided
+1 there ya go. Beat me to it.
Plus, I wouldn't even worry about backing up your stock ROM. Just flash the full official package. This will wipe your slate clean if you run into problems. Restoring nandroid backups leads to glitches eventually from what I've seen.
Sorry, I didn't see there was a second page here...I'm a bum.
want a droid said:
I guess you skipped the entire thread, but we already went through all that.
Click to expand...
Click to collapse
Should probably try not being a **** when you're begging for help from people.
Sent from my SCH-I500 using XDA App
Personally, I thought his reply was honest and effective. I commend him on his frankness, and respect him for his boldness.
grenade01 said:
Personally, I thought his reply was honest and effective. I commend him on his frankness, and respect him for his boldness.
Click to expand...
Click to collapse
Really? Snide, snarky comments are respectable? At the very least, they shouldn't be coming from the person asking for help.
Sent from my SCH-I500 using XDA App
Hi,
I was wondering if there was a way to restore my tablet to absolute factory settings......i have ClockwordMod and thors ICS build installed. I need factory like factory unrooted rom and also all personnel files gone along with clockworkMod gone. I need this done so i can send it to acer. I dont want to find out what will happen if they see its rooted and junk.
Moscow Desire said:
Easiest way is to copy a stock rom on your ext SD card. You can get one in vaches thread ' full packages' in the dev forum.
Then boot to recovery. Do wipes. Go to recovery and restore and toggle data/media. Then go to mounts and storage and do full formats.
This will format everything in internal memory.
Then flash the stock rom.
Click to expand...
Click to collapse
+1 i would flash an old stock rom than get the ota update or just flash a stock rom....a bit off topic but what do you think acer would do if you sent in a rooted tablet?
gears177 said:
+1 i would flash an old stock rom than get the ota update or just flash a stock rom....a bit off topic but what do you think acer would do if you sent in a rooted tablet?
Click to expand...
Click to collapse
Most cases nothing. Although technically they could charge you. Considering all the bricked tabs on the first ics update, I'm sure they don't bother looking.
thanks for all the help. I was able to flash to a stock rom!
I did these steps and must have made a mistake on the rom and now I am bootlooping. Any advice on how to restore back to factory would be appreciated
submandingo said:
I did these steps and must have made a mistake on the rom and now I am bootlooping. Any advice on how to restore back to factory would be appreciated
Click to expand...
Click to collapse
if you changed your bootloader to run ics you probably need to switch back stock HC bootloader:good:
submandingo said:
I did these steps and must have made a mistake on the rom and now I am bootlooping. Any advice on how to restore back to factory would be appreciated
Click to expand...
Click to collapse
You will need your UID
Download the following file
EUUs_SBK_Acer_A500_1.016.05_COM_GEN1.zip
You will have to search to find it.
Then follow the instructions from here
http://forum.xda-developers.com/showthread.php?t=1516012
Don't use the Timmydean version as it is rooted and doesn't have the stock recovery use the file you downloaded.
This will return you to stock.