Whitch nand can i download on my HD2
and how i do a partition on 8 gib
Silahsor_66 said:
Whitch nand can i download on my HD2
and how i do a partition on 8 gib
Click to expand...
Click to collapse
here u go (same thread started by you)
http://forum.xda-developers.com/showthread.php?t=915339
and here is one more (also started by you)
http://forum.xda-developers.com/showthread.php?t=858982
do you really need to start 3rd thread ?
Silahsor_66 said:
Whitch nand can i download on my HD2
and how i do a partition on 8 gib
Click to expand...
Click to collapse
your question is difficult to answer, as only you can chose which ones you'll like
best. there are loads here, i suggest you start reading.
for partitioning
this is the best one i use, its in the wiki
Personally i prefer gingerbread with cm7. All apps and games are working for me. Everything is just great. But its imo simple and minimalistic. But very cool.
There are some other builds like htc sense+gb and miui+gb hybrids out there, but for me not all games like asphalt and apps like swipepad are working. Sense brings nice widgets, a great ui and miui a very great, completly different and very customizable ui with it.
If there are problems with some apps or games with miui like for me, you could test the froyo based build. sense and miui.
Atm im using typhoons cm7 and im very satisfied. Another very great gb cm7 rom is pongsters. Im only using typhoons because its based on daily nightlies. Im sure you will like pongsters ;p or the other great roms out there. Like imilka, boyppc, ndt and so on they are all very great cookers and ive tested all of them.
Best thing is to test a few different roms and decide by yourself whats best for you.
All of those roms are installd by cwm (clockwork mod)
You can do flash your rom, format and partition your sd and lots of more things with it. All over the phone. For best you are reading the install instructions of each rom. The only thing you have to do over pc is to flash recovery layout which is used by your choosn rom amd copy your. zip rom file on sd. Copy files and mount your usb storage with clockwork recovery only. Magldr itselfs could damaging some files.
To partition your 8gb sdcard there is absolutly no pc needed. You have to load into ad recovery (clockwork mod) over magldr, choose advance and format or partition your sdcard. If i remenbering right. Choose 1gb ext partituon and 0mb swap partition and you are rdy to go (install your rom). Remember to do a backup of your files stored on sd.
Best tool to format and partitioning your sdcard is still gparted. But pls, dont format the wrong harddrives ;p
Might other members have some links for you. Im on mobile
Greets and hf
Sent from my HTC HD2
thanks i whill chek all
how do i instal magldr 1.13 its saying tey are missing some maps
Silahsor_66 said:
thanks i whill chek all
how do i instal magldr 1.13 its saying tey are missing some maps
Click to expand...
Click to collapse
http://www.multiupload.com/R2PYG1Z00U
or
http://forum.xda-developers.com/showthread.php?p=11097380
i recommend you to read first
I see everyone telling him mainly to find the best build himself, find what suits him.....(in his other threads) lets just give him a direct freaking answer so he'll stop making new threads.... ok.... HYPERDROID-GBX..... thats the best.... or Nexushd2-gingerbread... why? Because those two roms are not made for another device and ported for this device... they are compiled from scratch and optimimized just for this device.... and out of those two... for you... hyperdroid gbx is better because its themed nicely.... so there... hyperdroid gbx... thats the best nan rom there ever will be for you.... try it out: http://forum.xda-developers.com/showthread.php?t=918899
And magldr would be the best bootloader for you to boot this off of nand, not cLK because cLK is too hard for you to install....
diesburg said:
I see everyone telling him mainly to find the best build himself, find what suits him.....(in his other threads) lets just give him a direct freaking answer so he'll stop making new threads.... ok.... HYPERDROID-GBX..... thats the best.... or Nexushd2-gingerbread... why? Because those two roms are not made for another device and ported for this device... they are compiled from scratch and optimimized just for this device.... and out of those two... for you... hyperdroid gbx is better because its themed nicely.... so there... hyperdroid gbx... thats the best nan rom there ever will be for you.... try it out: http://forum.xda-developers.com/showthread.php?t=918899
And magldr would be the best bootloader for you to boot this off of nand, not cLK because cLK is too hard for you to install....
Click to expand...
Click to collapse
Its not the best. Its one of the best. He should try some roms and like everyone did see what he likes by himself.
And i would prefer pongsters hyperdroid gbx with cyanogenmod 7 (CM7) or typhoons CM7. Both very great roms. Typhoons is updated frequently.
Different roms for different tastes.
Hf
Sent from my HTC HD2
Awesome, now expect another thread in the future from him
Sent from my HTC HD2 using XDA Premium App
Related
Hey guys I just upgraded from my T-mobile G1 and I was wondering whats the fastest stable NAND Rom for the HD2 that i can use for daily use.
they work perfect almost bug free and fast
http://forum.xda-developers.com/showthread.php?t=918899
http://forum.xda-developers.com/showthread.php?t=1013852
http://forum.xda-developers.com/showthread.php?t=958953
http://forum.xda-developers.com/showthread.php?t=905060
take one of the shiftpda. they are so fast and looks nice too.. !
I'm really liking typhoon cyanogen right now.
Tried almost every Nand rom out there and couldnt get a better rom than HyperdroidGBX , there is also the ****pda rom and NexusHd2 . Good luck
hahaha, ****pda
Which of the Android NAND ROM is best without a single issue(sorry for high expectation as i require phone for daily usage with phone calls n all feature including battery standby) so if u can tell me which of this four is best it wud b helpful
lihkin said:
Which of the Android NAND ROM is best without a single issue(sorry for high expectation as i require phone for daily usage with phone calls n all feature including battery standby) so if u can tell me which of this four is best it wud b helpful
Click to expand...
Click to collapse
The answer is easy, there no such thing as without a single issue. Even a real android phone have flaws. Hardware, software, and carrier, somewhere between them someone always messed up something. Now between those 4, if you like pure android with the latest update is tytung's ROM. With a little more style out of the box is HyperdroidGBX.
Capt.PP said:
The answer is easy, there no such thing as without a single issue. Even a real android phone have flaws. Hardware, software, and carrier, somewhere between them someone always messed up something. Now between those 4, if you like pure android with the latest update is tytung's ROM. With a little more style out of the box is HyperdroidGBX.
Click to expand...
Click to collapse
ok thats true but I mean as stable as the ROM update you get from HTC
anyways I like pure android and as u said tytung's is gud der r 3 rom in tht 4 given vich1 is good & latest out of dis
[07MAY][cLK-MAGLDR][CWM]NDT GINGER V7.0 [GRJ22 Based][Kernel: Tytung_r 10]
[15.APR.11][cwm/clk] Ultimate Droid 3.3 [Tytung r9][Approved by Darkstone]
[3.May][cLK/MAGLDR] NexusHD2-Gingerbread V2.7 [GRJ22/Android2.3.4][Kernel:tytung_r10]
Hi,
You should check my sig...guide number 1.
The best ROM for HD2, with all HTC SENSE features, and HTC HUB features, stable, faaaast, dialy use, SENSE 2.0 or 2.1, i can't remember, is this
http://forum.xda-developers.com/showthread.php?t=954369
And the best of the best, without HTC SENSE, are those... (gingerbread)
http://forum.xda-developers.com/showthread.php?t=918899
http://forum.xda-developers.com/showthread.php?t=900197
I think ima go with HyperdroidGBX!!! and if I want a little more il try out tytung's ROM .
after I install HyperdroidGBX I can just flash tytung's ROM in clockwork right?
bmike08 said:
I think ima go with HyperdroidGBX!!! and if I want a little more il try out tytung's ROM .
after I install HyperdroidGBX I can just flash tytung's ROM in clockwork right?
Click to expand...
Click to collapse
yes, but first, wipe/format, when in cwm you must wipe data to install new rom, and everything is the same.
so when in cwm i will
1. wipe data factory reset
2. wipe cache partitions
3. install zip from sd if I have all of my radio's and SPL's installed for the ROM
Correct me if im wrong.
bmike08 said:
so when in cwm i will
1. wipe data factory reset
2. wipe cache partitions
3. install zip from sd if I have all of my radio's and SPL's installed for the ROM
Correct me if im wrong.
Click to expand...
Click to collapse
Hi,
If you are not sure of what you are doing,maybe you should read up a bit more before trying anything out.
Check here:
http://forum.xda-developers.com/showthread.php?t=893948
malybru said:
Hi,
If you are not sure of what you are doing,maybe you should read up a bit more before trying anything out.
Check here:
http://forum.xda-developers.com/showthread.php?t=893948
Click to expand...
Click to collapse
Thanks malybru I was just woundering once NAND is installed will it act just like a regular android phone when it comes to flashing new ROMs
I still have a G1 and its pretty easy flashing new ROMs, Karnels, and Radios
bmike08 said:
Thanks malybru I was just woundering once NAND is installed will it act just like a regular android phone when it comes to flashing new ROMs
I still have a G1 and its pretty easy flashing new ROMs, Karnels, and Radios
Click to expand...
Click to collapse
Hi,
Once you get used to the process,it's very easy to change ROMS.
It all seems daunting to begin with,but if you read up well,it's fairly simple...
I never had a regular android phone,as I have come from WinMo.
But I've made my HD2 into an android phone and it's easy switching ROMS.
Read the thread I gave you and number 2 in my sig...
Enjoy
i have tried all the "fast" roms but i feel like HD2 CoreDroid DHD V1.6 EU&TMOUS[SKINNED&TWEAKED] is fast and a bit more stable and if you want a build without sense then i really like CME DHD2 Compact v1.6[Superlight][NoSense][RAFPIGNA 1.9OC]
bmike08 said:
so when in cwm i will
1. wipe data factory reset
2. wipe cache partitions
3. install zip from sd if I have all of my radio's and SPL's installed for the ROM
Correct me if im wrong.
Click to expand...
Click to collapse
You can try without wipe cache partitions. Only step 1. and 3. and reboot, and remmeber for unwritten rule, that always after complete FIRST boot, you POWER OFF and POWER ON your phone. IT will make things better. But not *reboot*
thanks
!Hey guys I've been running hyperdroid gbx for about 2 weeks now, I love it!
I'm actually using it now to make my post.
Just a couple of questions
1. Does anybody know the best settings/ kernals to get excellent battery life without sacrificing 2 much performance?
2. Also is their away to go directly from MAGLDR to cLK
Thanks for all of you guys help
Hello all.
I am using DL_DesireZ v3.x at the moment, whis is Froyo with Sense 2.0.
According to the instructions I've partitioned my SD card to 3 partitions, one 6.5GB FAT32, one 1GB ext4 and another 512M ext4.
So far, this has been the stablest and fastest non-nand ROM for me (I can't get rid of WM because I need to use iGO and Garmin from it) but I'd like to get some of the updates and functionalities that came with Gingerbread, and since I do like Sense, I want it as well.
So, can somebody tell me is there any GB+Sense3 build for HD2 that is SD based and which can use ext3/4 partitions for data2sd or whatever it is called exactly?
Thanks.
aprunic said:
Hello all.
I am using DL_DesireZ v3.x at the moment, whis is Froyo with Sense 2.0.
According to the instructions I've partitioned my SD card to 3 partitions, one 6.5GB FAT32, one 1GB ext4 and another 512M ext4.
So far, this has been the stablest and fastest non-nand ROM for me (I can't get rid of WM because I need to use iGO and Garmin from it) but I'd like to get some of the updates and functionalities that came with Gingerbread, and since I do like Sense, I want it as well.
So, can somebody tell me is there any GB+Sense3 build for HD2 that is SD based and which can use ext3/4 partitions for data2sd or whatever it is called exactly?
Thanks.
Click to expand...
Click to collapse
Hi,
Is it here:
http://android.hd2roms.com/
malybru said:
Hi,
Is it here:
android.hd2roms.com
Click to expand...
Click to collapse
Weeel, that was a revelation of sorts...
Anyhow, after checking all of those builds, two things are clear:
- most of them are not for SD
- Sense 3 builds are far from stable & working
What do I mean?
It seems than NAND frenzy has taken strongly among HD2 owners for whatever reason they want to get rid of WM6.5, so most of the builds are stated as NAND.
There are some that are marked as ROM-ZIP...what are those?
On the other hand, I know that there are roms that are to be used with MAGLDR and some (if not all) can be used as a normal SD build, with haret, data.img and so on.
One example is the one I'm using right now, DL Desire, which comes as a NAND version and as a SD/MAGLDR version.
So how can I tell if a certain MAGLDR rom is usable as a SD build as well? Is it possible at all, as a general rule, if an author of a build does not explicitelly state so?
The second thing is more problematic, and is obviously kernel and hardware related.
Sense3 builds have graphic/camera problems (mutually) and also problems with some widgets (weather), boot menu, lock screen etc.
I've tried MccMBoxmaX GS V5.0 and was really surprised to see it work pretty good and fast (albeit with no apps installed) disregarding mentioned problems with graphics etc.
Since there is no build yet that has all the things fixed, I believe I should try an older ones with the latest Sense version before Sense3.
But which one is it? 2.1? And do they come in combination with Gingerbread as a base and what builds have that combination, also for SD and possibly using ext2/3/4 partitions?
I hope I'm not boring, but I've tried a bunch of different roms for SD with and without partitions support and now they are getting more and more rare and the whole "list of builds" has become so long and confusing that I just don't know which ones support what and which ones are for what...
Hi,
What you will have noticed,is that sd is not that well supported.
If you need to keep WM,then you are going to struggle to find very much.
Have you tried the American droid for sd?
A lot of people rave about it...
Try This rom
but it need ext on sd
http://forum.xda-developers.com/showthread.php?t=1038694
It's fast and stable till now for me
have you looked in the sd development section?
Hah!
It came out of the blue....just a few days ago I downloaded V5 where I saw all those mentioned Sense3 problems and there's V6 already...
Gotta get it today...
Oh yes, BTW I'm following SD devel thread constantly so I know what's going on there...and I still need helping info...
---
Sent from my DL DesireZ v3.5 using Tapatalk
aprunic said:
Hah!
It came out of the blue....just a few days ago I downloaded V5 where I saw all those mentioned Sense3 problems and there's V6 already...
Gotta get it today...
Oh yes, BTW I'm following SD devel thread constantly so I know what's going on there...and I still need helping info...
---
Sent from my DL DesireZ v3.5 using Tapatalk
Click to expand...
Click to collapse
Oh yes, I forgot, I'm talking about MccM BoxMax V6 that Dr.Hisham mentioned...
Working pretty well, although some problems have been discovered like BT not working, graphics glitches etc...although, it is pretty snappy even though it is Sense3 (2.1 actually).
But, it seems it will take some time to fix everything and so I'm opting for the following: SD build with ext partitions for data2sd, with Gingerbread and last version of Sense before 2.1 (2.0.x?) - anybody knows anything about those?
Guys, anybody with anything?
SDcard Gingerbread builds with pre-2.1/3 Sense for HD2?
I need a simple upgrade from the original HD2 Android 2.2 to a stable 2.3.x version.
Can anyone suggest one? (This is not a "which is the best ROM" request.)
I just want one that is the simplest and working out of the box to flash from the original MGLDR 2.2 Android on a TMOUS HD2. I'm flashing for an older friend for whom I installed the original some time ago, and he asked me to help him get Gingerbread, and I'm a little 'out of the loop' on the HD2 Android developments and particulars, so a simple flash is best. Is there a simple CWM flashable version for TMOUS that doesn't need to manually mess with partition prep, etc.?
Stability is more important than bleeding edge in this case, so any 2.3.x build is fine.
Thanks for any suggestions you might have.
donalgodon said:
I need a simple upgrade from the original HD2 Android 2.2 to a stable 2.3.x version.
Can anyone suggest one? (This is not a "which is the best ROM" request.)
I just want one that is the simplest and working out of the box to flash from the original MGLDR 2.2 Android on a TMOUS HD2. I'm flashing for an older friend for whom I installed the original some time ago, and he asked me to help him get Gingerbread, and I'm a little 'out of the loop' on the HD2 Android developments and particulars, so a simple flash is best. Is there a simple CWM flashable version for TMOUS that doesn't need to manually mess with partition prep, etc.?
Stability is more important than bleeding edge in this case, so any 2.3.x build is fine.
Thanks for any suggestions you might have.
Click to expand...
Click to collapse
If you're looking for a sense rom, I'd suggest going with one of the dhd roms (You'll have to use usb flasher to get the partition on), otherwise the simplest would be either:
This -> NexusHD2
This -> Typhoon CM7
or This -> HyperDroid CM7
These three roms need less system space than sense roms, so if you don't mind having a lot of empty space in your system partition, all you need to do is flash the zip using cwr.
My personal recommendation is the Typhoon Rom (2nd rom), it's very stable and up to date. Also, you can use either Titanium Backup/MyBackup apps to backup the phone's current apps.
I would recommend HyperDroidCM7v3.1. It's android 2.3.5 for both cwm and magldr. When I found it I stopped searching, and I am never gonna try anything else! (well, maybe. But you know what I mean hehe )
Sent from my HD2 HyperDroidCM7v3.1 using XDA Premium
se1988 said:
I would recommend HyperDroidCM7v3.1. It's android 2.3.5 for both cwm and magldr. When I found it I stopped searching, and I am never gonna try anything else! (well, maybe. But you know what I mean hehe )
Sent from my HD2 HyperDroidCM7v3.1 using XDA Premium
Click to expand...
Click to collapse
Does it require manual partition setup?
donalgodon said:
Does it require manual partition setup?
Click to expand...
Click to collapse
Only if you need apps2sd...
Use gParted, its no hassle
Thanks very much for your help, guys.
All finished. Everything running great.
Thanks too, i´m learning.
donalgodon said:
Thanks very much for your help, guys.
All finished. Everything running great.
Click to expand...
Click to collapse
_Mephisto_ said:
Thanks too, i´m learning.
Click to expand...
Click to collapse
Then hit the "Thanks" button
hi guys got one of these phones and looking to convert it to android.
i used to have a zte blade which i used custom roms on.
having looked around on the net there appears to be a lot of threads and ways of doing it, through sd card and through the nand.
just a quick question what is the best way to convert ?
thanks in advance
nand.
you just need to install hspl, and magldr.
then, flash over clockwork mod to flash roms.
you can see it done on youtube.
cappyandroid said:
nand.
you just need to install hspl, and magldr.
then, flash over clockwork mod to flash roms.
you can see it done on youtube.
Click to expand...
Click to collapse
thanks bud
looking at the beta 5 ice cream rom is this one ok or is there a more stable rom out there ?
watercooled223 said:
thanks bud
looking at the beta 5 ice cream rom is this one ok or is there a more stable rom out there ?
Click to expand...
Click to collapse
'Is there a more stable ROM out there'
Read the ROM title, it's a BETA!! Of course there are more stable ROMs out there, this one isn't even for daily use (in my opinion). Firstly see this guide for how to flash, then as for ROMs you may want to try a CM7 ROM, these are fast and stable.
if you want safety (keep a warranty if you have one), ability to go back to winmo in a snap, and ease youre safest bet is SD rom!
if you are wanting to turn this bad boy into more of a NATIVE android/WP7 device get to flashing that NAND!
there are plenty of ROCK solid android roms available, however, ANY droid 4.x (ICS) roms at this point arent quite your solid everyday drivers. they (the AMAZING devs here) are still working out bugs with usb storage and camera conflicts. so if neither one of those are needed then go for it lol :-D
whatever method you choose (SD/NAND) I wish you good luck and a simple reminder ... READ, READ, READ!!!
ok all flashed and running this rom
http://forum.xda-developers.com/showthread.php?t=769026
i have it overclocked to 1.19ghz
i would like to overclock it more
how do i do that ?
watercooled223 said:
ok all flashed and running this rom
http://forum.xda-developers.com/showthread.php?t=769026
i have it overclocked to 1.19ghz
i would like to overclock it more
how do i do that ?
Click to expand...
Click to collapse
Good choice of rom
You would have to flash a new Kernel which supports higher O/C frequencies. I personally haven't found much difference after doing this, but Dorimanx's Kernel supports up to 1.61GHz overclock
To flash, just enter CWM and flash .zip folder
thanks bud.
just installed the AmeriCanAndroid and all is well its a very snappy rom
but i cant get into cwm to do a backup ?
says its not there in ad recovery ?
watercooled223 said:
thanks bud.
just installed the AmeriCanAndroid and all is well its a very snappy rom
but i cant get into cwm to do a backup ?
says its not there in ad recovery ?
Click to expand...
Click to collapse
u need to flash a proper recovery using usb flasher n wen u go into adrecovery you will b able to enjoy cwm
Flash compatible radi => run task29 => flash MAGLDR => flash CWM => flash rom
MarioWaza said:
Flash compatible radi => run task29 => flash MAGLDR => flash CWM => flash rom
Click to expand...
Click to collapse
I would recommend not doing that, as you may get into the habit of Task29ing too much. this could cause problems (search bad blocks on NAND) in future. You could probably get away with just reflashing CWM if you followed the rest of the steps correctly
I am looking for a stable android ROM for my HD2 to be installed on the phone memory only and has nothing to do with the SD card...
I need something closer to the following rom but updated:
http://forum.xda-developers.com/showthread.php?t=893620
Thank you !
Nakkoush said:
I am looking for a stable android ROM for my HD2 to be installed on the phone memory only and has nothing to do with the SD card...
I need something closer to the following rom but updated:
http://forum.xda-developers.com/showthread.php?t=893620
Thank you !
Click to expand...
Click to collapse
Have you even tried looking in the NAND Development forum? There are tonnes of those to choose from. Read the sticky at the top by yz.hd for a good list of almost all of them.
Nigeldg said:
Have you even tried looking in the NAND Development forum? There are tonnes of those to choose from. Read the sticky at the top by yz.hd for a good list of almost all of them.
Click to expand...
Click to collapse
dude, i am looking for a Sence nand rom (since I use HTCsync) that will install on the phone's internal memory only without the need to partition and use my external SDCARD (of the HD2 EU version).
AFAIK, I couldn't find any ROM beside the one that I posted its link in my previous post that can be installed on the phone's internal memory only !
Any help is highly appreciated !
Nakkoush said:
dude, i am looking for a Sence nand rom (since I use HTCsync) that will install on the phone's internal memory only without the need to partition and use my external SDCARD (of the HD2 EU version).
AFAIK, I couldn't find any ROM beside the one that I posted its link in my previous post that can be installed on the phone's internal memory only !
Any help is highly appreciated !
Click to expand...
Click to collapse
Literally a few seconds on the NAND Development page and I found this. The OP clearly states that A2SD is an extra addon, and post 4 confirms this. Should be fine for you
Nigeldg said:
Literally a few seconds on the NAND Development page and I found this. The OP clearly states that A2SD is an extra addon, and post 4 confirms this. Should be fine for you
Click to expand...
Click to collapse
I feel embarrassed to ask you more mate BUT the fact is that Android 2.2.x never work fine with 7 digits numbers caller ID 0x xxx xxx... I need something like 2.3.x with Sence (to use it with HTCsync as well)
Nakkoush said:
I feel embarrassed to ask you more mate BUT the fact is that Android 2.2.x never work fine with 7 digits numbers caller ID 0x xxx xxx... I need something like 2.3.x with Sence (to use it with HTCsync as well)
Click to expand...
Click to collapse
Not sure if any of those don't use SD EXTs for EU models, but if so it will be a 2.3.3 with Sense 2.1 ROM. I'm reasonably sure that Sense 3.0 + is far too big to fit only on NAND storage. Also, the whole point of the Q&A is to ask questions and get answers So there isn't any need to be embarassed unless you haven't searched yet
You can try Team Blue Droid by Dansta, it is GB with Sense 3.5. All you need to do is flash it, as long as you do not have an sd-ext then it will automatically flash as a Tmous HD2 and install the rom on internal memory.
chrisrj28 said:
You can try Team Blue Droid by Dansta, it is GB with Sense 3.5. All you need to do is flash it, as long as you do not have an sd-ext then it will automatically flash as a Tmous HD2 and install the rom on internal memory.
Click to expand...
Click to collapse
Hello everybody. I also need nand installation coz i want sd-ext for data2sd.... plz help
shezi2243 said:
Hello everybody. I also need nand installation coz i want sd-ext for data2sd.... plz help
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=928
Kameirus said:
http://forum.xda-developers.com/forumdisplay.php?f=928
Click to expand...
Click to collapse
I knw wHERE the NAND section is. I wanna knw abt a nand only sense 3.5 rom. Coz they usually ask for sd-ext
shezi2243 said:
I knw wHERE the NAND section is. I wanna knw abt a nand only sense 3.5 rom. Coz they usually ask for sd-ext
Click to expand...
Click to collapse
Nand only sense 3.5 on a EU hd2 without sd-ext? are you sure that thing even exist?
Even if it does, I doubt you'll be able to install more than just a couple of apps.
Use YZ sticky compilation to find sense 3.5 roms, and start narrowing them down.
Marvlesz said:
Nand only sense 3.5 on a EU hd2 without sd-ext? are you sure that thing even exist?
Even if it does, I doubt you'll be able to install more than just a couple of apps.
Use YZ sticky compilation to find sense 3.5 roms, and start narrowing them down.
Click to expand...
Click to collapse
Well if i could hav something like it, id use sibere data2sd to hav 1 gb sd ext for app installation
This is the best you can get for nand system.... Urdroid.
TBD Sense
fsxpilipinas said:
This is the best you can get for nand system.... Urdroid.
Click to expand...
Click to collapse
I'm Using this rom from 5 days can't believe its so smooth and very good battery it's a sense rom by developer sundawg.
http://forum.xda-developers.com/showthread.php?t=1769081