Hey guys,
My new NC just arrived today, and I have a few questions.
It did NOT have the evil Blue Sticker on the box, and the serial # started with 201124. I fired it up and it said " Touch the future of Reading.
Is this the Old partitioned NC?
Lastly, I didn't let it go past the video screen- I wanted to check here first to see if it is ok to go ahead and register the device.
Will it try to upgrade the firmware and repartition the firmware if I do?
I know I can check the firmware version of my stock nook after I register it.
It should be 1.0.1 right?
I want to install cm7 on the emmc.
Thanks in advance for any info on this
Jimbo67 said:
It did NOT have the evil Blue Sticker on the box, and the serial # started with 201124. I fired it up and it said " Touch the future of Reading.
Is this the Old partitioned NC?
Click to expand...
Click to collapse
Yes, yours has the old firmware/partitions. NC's preloaded with 1.2 show "Read Forever" at power-on. Updating to 1.2 will not affect the partitioning.
Consider yourself lucky. Ha
I Am Marino said:
Consider yourself lucky. Ha
Click to expand...
Click to collapse
Thanks Bro!!! And a Heartfelt appology for my post directed at you the other night, totally uncalled for for me to do that-- Don't know where my mind was cause that is not me!
jll544 said:
Yes, yours has the old firmware/partitions. NC's preloaded with 1.2 show "Read Forever" at power-on. Updating to 1.2 will not affect the partitioning.
Click to expand...
Click to collapse
Thank You--Your Reply saved me a stroke! LOL
Related
I'm going to attempt to install 'RAM Desire HD RC 0.1' but it's requirements are ;
- CWR Recovery flashed with 400MB system layout
- FAT32+EXT2/3/4 partition on SDCARD for EU users, TMOUS can still install without it, it will be detected automatically
- Brain
I'm guessing the last one is just to check you're not stupid?
What exactly are you trying to figure out how to do? Which part can't you figure out?
SpiderVenom said:
What exactly are you trying to figure out how to do? Which part can't you figure out?
Click to expand...
Click to collapse
I just don't understand the terminology thats all mate.
bouncyball said:
I just don't understand the terminology thats all mate.
Click to expand...
Click to collapse
I would recommend reading the stickies in the NAND forum if you don't understand what you have in the OP.
A noob question, I just received my A7 and went to do the Dexter update. One thing I noticed was I was not able to boot as instructed, so I saw as option to "update" within the A7 it's self. Was this wrong, I did not see any option of doing a full wipe, did I just over lay the new OS from Dexter or should I have done the full wipe and is so how? Thanks.
Jimi Mack said:
A noob question, I just received my A7 and went to do the Dexter update. One thing I noticed was I was not able to boot as instructed, so I saw as option to "update" within the A7 it's self. Was this wrong, I did not see any option of doing a full wipe, did I just over lay the new OS from Dexter or should I have done the full wipe and is so how? Thanks.
Click to expand...
Click to collapse
Dude, You have to follow the instructions AS POSTED for installing Dexters' mods else you invite a whole lot of rant about "beating a dead horse" or something. That means no shortcuts!!!
rphilippe777 said:
Dude, You have to follow the instructions AS POSTED for installing Dexters' mods else you invite a whole lot of rant about "beating a dead horse" or something. That means no shortcuts!!!
Click to expand...
Click to collapse
Meh, at least I am memorable.
Thats my signature by the way, its there whether there is a horse in distress or not.
I was staying out of this thread until you had to run your mouth ... er, um, fingers...
A+ for instigation.
Hi, im new to this forum, and this is actually my first post =P, i looked through this website and saw alot of things that i reallly liked (Like the MIUI rom).
I've never done anything to my phone lol and i was wondering if anyone here can walk me through from beggining to end on how to get my phone the MIUI rom.
My phone is a never rooted before mytouch 4g from t-mobile. ive nver done any of this, and i would just like your help. ive tried google and stuff, there are guides, but there are all peace by peace. i just dont want to mess up and "brick" my phone. So anyone out there can walk me through i would greatly appritiate it =D, and if there is a shortcut to this like one click auto install?( idk if that actually excists XD)
Anyways thanks in advance.
Btw i like this forum, found bunch of cool new apps that i never knew about (Go Launcher Ex) XD
shahzod said:
Hi, im new to this forum, and this is actually my first post =P, i looked through this website and saw alot of things that i reallly liked (Like the MIUI rom).
I've never done anything to my phone lol and i was wondering if anyone here can walk me through from beggining to end on how to get my phone the MIUI rom.
My phone is a never rooted before mytouch 4g from t-mobile. ive nver done any of this, and i would just like your help. ive tried google and stuff, there are guides, but there are all peace by peace. i just dont want to mess up and "brick" my phone. So anyone out there can walk me through i would greatly appritiate it =D, and if there is a shortcut to this like one click auto install?( idk if that actually excists XD)
Anyways thanks in advance.
Btw i like this forum, found bunch of cool new apps that i never knew about (Go Launcher Ex) XD
Click to expand...
Click to collapse
what android version are you on? check by going to settings/about phone
also, you should read this: http://forum.xda-developers.com/showthread.php?t=1281085
thanks for the quick respone =D, i think i got the new 2.3.4 i got the update like a month ago =P
shahzod said:
thanks for the quick respone =D, i think i got the new 2.3.4 i got the update like a month ago =P
Click to expand...
Click to collapse
then you will have to downgrade. follow THIS GUIDE
also, verify your eMMC chip before rooting. CHECK HERE
shahzod said:
thanks for the quick respone =D, i think i got the new 2.3.4 i got the update like a month ago =P
Click to expand...
Click to collapse
follow link above and Downgrade, sucks that you updated, but don't worry you can downgrade to the awesome 2.2.1!
It's quite difficult to brick the phone if you follow the steps exactly. the only time you may brick the phone is when it is during the process of flashing the stock 2.2.1 rom, and you pull the battery or something. So make sure you're battery is charged! and secure.
i understood the downgrade part but im very confused about emmc thing, whats adb?
shahzod said:
i understood the downgrade part but im very confused about emmc thing, whats adb?
Click to expand...
Click to collapse
see THIS GUIDE
saranhai said:
see THIS GUIDE
Click to expand...
Click to collapse
thanks ill get back to you when i find out whts my phones eMMC thing
ok there seems to be a porblem, when i type cat /proc/kmsg | grep 'mmc0:0001' it says it found nothing and something about permission =/ and i read a little and was wondering is it because my MT4g is 2.3.4?
shahzod said:
ok there seems to be a porblem, when i type cat /proc/kmsg | grep 'mmc0:0001' it says it found nothing and something about permission =/ and i read a little and was wondering is it because my MT4g is 2.3.4?
Click to expand...
Click to collapse
ah, when you try that command, it has to be tried through adb, and the phone has to be in a custom recovery, like clockworkmod or 4EXT. since you don't have a custom recovery currently installed, it won't work. so try the other command, through terminal emulator.
saranhai said:
ah, when you try that command, it has to be tried through adb, and the phone has to be in a custom recovery, like clockworkmod or 4EXT. since you don't have a custom recovery currently installed, it won't work. so try the other command, through terminal emulator.
Click to expand...
Click to collapse
can u tell me the command i cant find it >.< and i did download Terminal Emulator already
EDIT found it
saranhai said:
ah, when you try that command, it has to be tried through adb, and the phone has to be in a custom recovery, like clockworkmod or 4EXT. since you don't have a custom recovery currently installed, it won't work. so try the other command, through terminal emulator.
Click to expand...
Click to collapse
GOT SEM04G? whats that mean?
shahzod said:
GOT SEM04G? whats that mean?
Click to expand...
Click to collapse
It's a good one your fine
Sent from my Tweaked out RCmix3D myTouch 4G via xda premium !
Tez MyTouch said:
It's a good one your fine
Sent from my Tweaked out RCmix3D myTouch 4G via xda premium !
Click to expand...
Click to collapse
so whats next XDD
shahzod said:
so whats next XDD
Click to expand...
Click to collapse
congrats! now you can proceed to downgrade and root
saranhai said:
congrats! now you can proceed to downgrade and root
Click to expand...
Click to collapse
****t im reading through it right now seems difficult XD and its pritty late here i migh start of fresh on saturday lol,btw is there possibly a video on how to downgrade?
shahzod said:
****t im reading through it right now seems difficult XD and its pritty late here i migh start of fresh on saturday lol,btw is there possibly a video on how to downgrade?
Click to expand...
Click to collapse
not sure if there is a video, but here's a link... it looks more organized and spread out than the link i posted before... hope it's easier to follow
LINK: http://theunlockr.com/2011/10/25/how-to-downgrade-the-g2-desire-z-desire-hd-and-mytouch-4g-back-to-froyo/
I am not a noob, but i am stuck! I have rooted two of my MT4G's, one broke so i had to get a new one. Unfortunately I cannot root it.
It came with Android 2.3.4, HTC 2.1, Software # 2.32.531.1, HB Root 0.89.0006, MICROP 0429.....
So... When I try the "NORMAL" way it starts the update and then says,..." MAIN VERSION IS OLDER - UPDATE FAIL! "
Is there any way of Rooting it? Has anyone found a way to do it?
I would GREATLY appreciate any help!
THANKS!
BillyBoy74 said:
I am not a noob, but i am stuck! I have rooted two of my MT4G's, one broke so i had to get a new one. Unfortunately I cannot root it.
It came with Android 2.3.4, HTC 2.1, Software # 2.32.531.1, HB Root 0.89.0006, MICROP 0429.....
So... When I try the "NORMAL" way it starts the update and then says,..." MAIN VERSION IS OLDER - UPDATE FAIL! "
Is there any way of Rooting it? Has anyone found a way to do it?
I would GREATLY appreciate any help!
THANKS!
Click to expand...
Click to collapse
try this thread http://bit.ly/rugejM
Follow the link the other guy left. You have to force down grade to froyo software. It is a easy process once you have everything downloaded and put in the right place on your computer, that way when you run the command lines it doesn't give you any errors. Personally out took me a while to get it all figured out bite when I did it went as smooth as butter. Got the thanks button please
Core droid htc glacier
neidlinger said:
try this thread http://bit.ly/rugejM
Click to expand...
Click to collapse
AWESOME!!! Finally some help! ha!
Much appreciation, and it worked like a champ!
I hit the thanks button on both!
rpomponio said:
Follow the link the other guy left. You have to force down grade to froyo software. It is a easy process once you have everything downloaded and put in the right place on your computer, that way when you run the command lines it doesn't give you any errors. Personally out took me a while to get it all figured out bite when I did it went as smooth as butter. Got the thanks button please
Core droid htc glacier
Click to expand...
Click to collapse
Thanks Alot! Worked!
BillyBoy74 said:
AWESOME!!! Finally some help! ha!
Much appreciation, and it worked like a champ!
I hit the thanks button on both!
Click to expand...
Click to collapse
thanks bro, hope all is well for you!!
Core droid htc glacier
nothing
nothing
thenotoriouspie said:
Come on I know you guys are reading this
Any advice would be much appreciated. I cannot get CWM to mount, format, or flash anything. Please help me fix it so I can fix my nook!
Click to expand...
Click to collapse
I have helped several users with similar issues recently. I don't feel like going through it again. Just search. Particularly in NC Q&A.
Sent from my Nook HD+ running CM10.1 on emmc.
nothing
thenotoriouspie said:
Any chance I could get you to post the thread url? I can't even find it
Click to expand...
Click to collapse
I said similar not exact issue. Look for won't boot, dead nook, won't mount, etc.
Sent from my Nook HD+ running CM10.1 on emmc.
What version of CWM are you using?
Sent from my rooted stock Nook HD
nothing
thenotoriouspie said:
http://www.techerrata.com/file/teamwin/1gb_clockwork-3.2.0.1-eyeballer.zip
thats literally the only way i can get anything to show up on my nook anymore
Click to expand...
Click to collapse
Well try mine from my NC tips thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
nothing
thenotoriouspie said:
Which one exactly?
Click to expand...
Click to collapse
Any, but I personally like 5.5.0.4.
Edit, but 6.0.1.2 has a bigger image, so better for CM10.1 ROMs.
Sent from my Nook HD+ running CM10.1 on emmc.
nothing
thenotoriouspie said:
I mean which link?
Click to expand...
Click to collapse
I said the NC Tips thread. This is why I get frustrated helping users fix the same issues over and over. If you had read some of those threads, you would know that.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I said the NC Tips thread. This is why I get frustrated helping users fix the same issues over and over. If you had read some of those threads, you would know that.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Don't worry about it anymore. I'll figure it out myself from here.
Mods please close this topic
Also sorry I held a gun to your head and forced you to open my topic and help me. I really need to stop doing stuff like that