saving current ROM - myTouch 3G, Magic General

Recently rooted my MT3G. I have used Root Checker to verify root access and BusyBox install.
I have ROM manager installed. I believe, I should first save the original ROM, in case I need to restore it. When I use the menu item to save current ROM, it goes to the myTouch green splash screen, then to the black screen with the triangle containing an !
At that point do I need to press a combination of keys to get into next step, or just wait? It does not seem to do anything at that point.

To add to this, in Rom Manager I first flashed the ClockworkMod Recovery. However, when I click the menu to "Reboot into Recovery", I get the green myTouch start screen and it just hangs there.

Just do a nand backup in custom recovery (clockwork, amon ra, whichever one you're using; power down the phone then press and hold HOME+POWER until you get to it), it'll save it to your sd card.

RikR said:
To add to this, in Rom Manager I first flashed the ClockworkMod Recovery. However, when I click the menu to "Reboot into Recovery", I get the green myTouch start screen and it just hangs there.
Click to expand...
Click to collapse
Sounds like recovery didn't install correctly. Try reinstalling recovery and see if that helps. You could try installing recovery from terminal emulator. If you don't have term emulator search for it in the market then follow directions here.
This method will work for clockwork also just replace the file/file name with it.

OK, I power down. Then do home+power until green myTouch screen appears, continue to hold down home+power until triangle with ! appears, then release buttons, repress home+power and it goes to original MT3G recovery. So, sounds like Clockwork recovery did not install. Will try terminal emulator install method.

OK, when I run this in terminal I get
flash_image: not found

Found something online that says flash_image is not available in HTC stock rom. I am currently running FROYO, not a custom rom.

Obtained a copy of flash_image, will put it in and try again

I have flash_image on the SD card, but can not move it to /system/bin, not even by using the terminal. : (
I wonder if the app Root Explorer could move it or copy/paste it.

How in the heck does anyone install new roms in an MT3G if you can not flash???

Do a search on how to flash recovery through fastboot (in a nutshell you'd need AndroidSDK/ADB tools and a custom recovery image, then it's just a matter of connecting your phone to pc, booting into fastboot and issuing a 'fastboot flash recovery recovery.img' through cmd), once you do, you can flash new roms.

An update on the outcome in case any one else as noob as me has these same problems. Following the rooting thread elsewhere here for the MT3G, I downloaded roottools and was able to use adb to change the permissions on /system/bin so that flash_image could be put there. Also was able to put the recovery mentioned in that same thread on my phone. Once finished, I was able to boot into the new recovery and do a backup of the phone.
So, I believe that finally has me in a position to try and flash a new rom, with the option of restoring me back to what I jave now if the new rom has issues.
I'd be interested in recommendations for ROMs to try on the MT3G. Are any of the custom ROMs preferable to FROYO which I am now running? Do any make the phone operate more "snappy"? That is my primary wish, not so much features, but responsiveness. I appreciate the help given here.

Last night I used Rom Manager to download Cyanogen 6.1.0 and the Google apps. I chose to wipe data and cache when installing. When I began the rom swap the phone rebooted to the green myTouch screen, after a while, it rebooted to the green screen, this continued until I eventually pulled the battery. Reinserting the battery and turning the phone back on only started this boot looping again. So, I pulled the battery, started up into the recovery and did a restore. Fortunately, the restore seems to have worked perfectly.
Any ideas on how to get the rom swap to go?

Sounds like you might need to flash an alternative kernel. Check your phones info (power off then reboot holding down volume down+power) to see if it is compatabile with the rom. If your device is 32b and your radio 2.22.27.08 or 2.22.28.85 flash a 2708+ kernel from here
or an autokernel from here after flashing the rom or just search 2708+ kernel, you'll find lots of options, everyone has a personal favorite.

fastboot shows this:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP 30000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009,22:33:27
So, if I flash a 2708+ kernel, I would do that, then flash the new rom? Or, would I flash the rom, then boot back into the recovery and flash the kernel, then restart the phone?

About Phone:
Android Version
2.2.1
Baseband Version:
62.50SJ.2017U_2.22.28.25
Kernal Version:
2.6.32.9-27237-gbe746fb
[email protected] #1
Build number
FRG83D

When I flash Clockwork recovery, and see it appear when I boot into recovery, then how is it possible that later, the Android recovery comes back?

RikR said:
fastboot shows this:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP 30000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009,22:33:27
So, if I flash a 2708+ kernel, I would do that, then flash the new rom? Or, would I flash the rom, then boot back into the recovery and flash the kernel, then restart the phone?
Click to expand...
Click to collapse
Rom first then kernel.

RikR said:
When I flash Clockwork recovery, and see it appear when I boot into recovery, then how is it possible that later, the Android recovery comes back?
Click to expand...
Click to collapse
I think it's because your still on a stock rom. Once you flash a custom one that should stop happening.

When i flashed Cyanogen 6.1.0, the phone would not boot. So, how do I flash the rom first, and then flash the kernel? Also, can you suggest a specfic kernel for my MT3G? Why doesn't the Cyanogen 6.1.0 already have the kernel i need?

Related

Help think I might have bricked my Magic(32A)

Hi,
I feel very bad asking but can you please help me with my Magic(32A) - Rogers.
Here is the story,
I bought the phone on ebay and the seller indicated that he rooted the phone before he sold me. So I thought okay as its rooted I can go to fast boot and just apply update.zip. So I did the below
1. switched off the phone
2. pressed home + power on and went to fast boot
3. did clean swipe
4. applied update.zip
It applied the custom rom(CyanogenMod 32a) and after that I am stuck on Roger's boot-up screen. So after this I removed my battery and I tried to going to fastboot and clicking Nandriod v2.1.1 restore and I get this error "E:Can't mount /dev/block/mmcblkop1". After that I did wipe and tried to apply restore but can "Error running nandriod restore. Restore not performed".
Can you please advise me of any options I have to restore my magic back.
Thanking you
FD
If you where not flashing the SPL you "should" still be ok if you can get into fastboot.
If you can just try to apply the ROM again, you might want to download another copy or different ROM (Hero maybe).
Clinton
do me a fav and power on holding down the vol down. see if you go into fastboot. if you do then you are not bricked. if so, see what your radio and spl is plus check if your (s) is off. if so you are rooted and you flashed the wrong board rom. if its on then your seller lied and you are not rooted. if so fallow the rooting guides that are posted here. if you need ne help just pm me and i will apply my skills the best i can. i want all to be rooted and experience the true right of freedom. lol. fosho. . . .
Partial hope
When I power it on and hold volume down I can get into fastboot mode and here is what I can see on the screen
Sapphaire pvt 32A eng s-off H
Hboot-1.33.2009(SAPP50000)
CPLD-12
Radio-3.22.20.17
May 6 2009, 00:17:16
Can you please advise me on what I can do next please. Is my phone rooted as it has "s-oof"? and what should my next steps be.
Thanking you
FD
ok ?. did you buy it rooted so you didnt have to do ne thing?? does it have RAv recovery or cm's recovery??
Thank you rocking_mod I was able to restore my phone. Here is what I did
1. downloaded HoFo mod to renamed it to update.zip and copied it to SD card
2. used a recovery img and did a fast boot and loaded the img
3. after the reboot did a clean wipe
4. loaded the HoFo rom from the recovery mode.
And finally now the phone works again. Enough of action for one day.
Thanks again.
freedonkey said:
Thank you rocking_mod I was able to restore my phone. Here is what I did
1. downloaded HoFo mod to renamed it to update.zip and copied it to SD card
2. used a recovery img and did a fast boot and loaded the img
3. after the reboot did a clean wipe
4. loaded the HoFo rom from the recovery mode.
And finally now the phone works again. Enough of action for one day.
Thanks again.
Click to expand...
Click to collapse
Congrats!
Always great to see when someone bring his mobile back to live
I'm guessing the ROM you downloaded was not compatible with your phone. As a side note, do NOT apply the Rogers update ontheir web site. It will upgrade your SPL to the dreaded perfect version.
I got the same error when I first apply the hofoion108.zip. I happened to press apply again somehow, and it had no errors at the second time. My phone can start with that rom later on.
I need help, i am in same situation as you freedonkey, but i don't know where to get the files you reffer to:
1. downloaded HoFo mod to renamed it to update.zip and copied it to SD card
2. used a recovery img and did a fast boot and loaded the img
3. after the reboot did a clean wipe
4. loaded the HoFo rom from the recovery mode.
The HoFo mod and which recovery image should i use and where to get it ?
My phone specs so far are:
Sapphaire pvt 32A eng s-off H
Hboot-1.33.2005(SAPP50000)
CPLD-12
Radio-6.35.08.29
Apr 20 2009, 15:30:43
ps: I am not sure, but i dont know what model is mine (i am kind of a newbie :/) i think it should be Rogers, but not sure, bought it in Portugal blocked to TMN phone company.
I also "soft-bricked" my Magic when installing a new ROM. I had wrong radio and didn't wipe before trying to install - all I was left was the HTC boot splash.
I was then, after a few days of reading & thinking, able to restore the device! I had bought it used so I had no warranty.
I used ADB to check out if the device was alive or dead. I wiped everything that was left (kernel, boot, system and userdata) and flashed new radio that would work with CM5/6. After that I flashed Amon_RA 1.71 Recovery, a 1.6 Donut ROM, gapps and new kernel. It worked! After that (for a month) I've been playing with CM6 nightlies and RC's.
If you don't want root capablities, just the original ROM, there should be good info on that. But if you do, I would recommend to follow CyanogenMod instructions from their wiki - they're helpful and easy to follow.
NaDaBrAvItChKa said:
I need help, i am in same situation as you freedonkey, but i don't know where to get the files you reffer to:
1. downloaded HoFo mod to renamed it to update.zip and copied it to SD card
2. used a recovery img and did a fast boot and loaded the img
3. after the reboot did a clean wipe
4. loaded the HoFo rom from the recovery mode.
The HoFo mod and which recovery image should i use and where to get it ?
My phone specs so far are:
Sapphaire pvt 32A eng s-off H
Hboot-1.33.2005(SAPP50000)
CPLD-12
Radio-6.35.08.29
Apr 20 2009, 15:30:43
ps: I am not sure, but i dont know what model is mine (i am kind of a newbie :/) i think it should be Rogers, but not sure, bought it in Portugal blocked to TMN phone company.
Click to expand...
Click to collapse
Can anyone give me any tip?? i don't know which file should i get for my phone :| or even where to get it .. any help would be really appreciated
kanttii said:
I also "soft-bricked" my Magic when installing a new ROM. I had wrong radio and didn't wipe before trying to install - all I was left was the HTC boot splash.
I was then, after a few days of reading & thinking, able to restore the device! I had bought it used so I had no warranty.
I used ADB to check out if the device was alive or dead. I wiped everything that was left (kernel, boot, system and userdata) and flashed new radio that would work with CM5/6. After that I flashed Amon_RA 1.71 Recovery, a 1.6 Donut ROM, gapps and new kernel. It worked! After that (for a month) I've been playing with CM6 nightlies and RC's.
If you don't want root capablities, just the original ROM, there should be good info on that. But if you do, I would recommend to follow CyanogenMod instructions from their wiki - they're helpful and easy to follow.
Click to expand...
Click to collapse
Thanks for the help kantiii, i will see what i can doo tonight when i get back home
Hey again Kantii,
I am sorry i am bit newbie, I figure out my phone is still alive sthoughout ADB as u did, but i don't know for sure how to:
1- I wiped everything that was left (kernel, boot, system and userdata)
- I actuall wiped it after i turned the phone on with Home+off buton, does that inclued kernel and system wipe ?
2- flashed new radio that would work with CM5/6
- CM = Cyanogen Mod ??? which of these files u recomend to me ? (Both radio and CM5/6 ?)
3- I flashed Amon_RA 1.71 Recovery, a 1.6 Donut ROM, gapps and new kernel
- Is Amon_RA 1.71 Recovery compatible with any HTC MAgic ???
I am really newbie about all this so I would appreciate all details! :|
thanks a lot for everything so far anyway
Sorry for long time no reply! I had not checked my mailbox!
You should wipe them in fastboot:
1. Turn your phone on by pressing back + power until you are in fastboot & see the skating droids. Another method to do this is turning the phone on by pressing volume down + power and then the back key.
2. Connect the device to your pc (make sure you see FASTBOOT USB on the phone display) and run CMD
3. type "fastboot devices" and check if your phone is plugged in correctly and you see the device ID.
4. Now you can wipe them correctly with fastboot:
4.1 type "fastboot erase [system/cache/userdata/boot/kernel/recovery all separately]" (without brackets etc, they are here to make reading easier)
4.2 Download:radio http://www.theandroidkitchen.com/fi...es/?download=Radio_HTC_PVT_32A_3.22.20.17.img
SPL http://briancrook.ca/android/3.22/hboot-1.33.2005.img
recovery http://rapidshare.com/files/387932922/recovery-RA-sapphire-v1.7.0H-cyan.img​4.3. Move the downloaded files to C:\ (and if you want, rename to Radio.img and Hboot.img and Recovery.img) so it is easier to use them. After that type "cd.." in cmd repeatedly until you are in C:\
5. Now you should be able to flash the radio, SPL and recovery images:
5.1 Type "fastboot flash radio Radio.img"
5.2 Type "fastboot flash hboot Hboot.img"
5.3 Type "fastboot flash recovery Recovery.img"
5.4 In each step wait until fastboot says it has finished - if you won't, you have to start everything again or may brick your device.
6. Now in your phone press menu to power down it. Then boot again to fastboot to confirm you flashed correctly:SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005
RADIO-3.22.20.17​7. Now power down the device again and boot to recovery by pressing home + power.
7.1 In recovery, check that it works correctly (no lag, no crashes, functions work properly)
8. Now you can install CyanogenMod 6 and enjoy fast FroYo on your Magic
http://wiki.cyanogenmod.com/index.php?title=Upgrading_from_CyanogenMod_4.2_to_CyanogenMod_5/6
Good luck and hopefully you can restore your device!
kanttii said:
Sorry for long time no reply! I had not checked my mailbox!
You should wipe them in fastboot:
1. Turn your phone on by pressing back + power until you are in fastboot & see the skating droids. Another method to do this is turning the phone on by pressing volume down + power and then the back key.
2. Connect the device to your pc (make sure you see FASTBOOT USB on the phone display) and run CMD
3. type "fastboot devices" and check if your phone is plugged in correctly and you see the device ID.
4. Now you can wipe them correctly with fastboot:
4.1 type "fastboot erase [system/cache/userdata/boot/kernel/recovery all separately]" (without brackets etc, they are here to make reading easier)
Click to expand...
Click to collapse
Not to thread hijack, but these instructions look well suited to my situation. At step 4.1 I get the error "FAILED (remote: not allow)". How to solve?
These instructions are only for Magic, but..
Post your fastboot details, please.
Hi my magic 32b is stuck on vodaphone splash screen.no fastbiot or recovery.but chargeable via usb and has blue light too.can u show me steps to softunbrick
Sent from my HTC Desire using XDA App
Sorry, but 32b is out of my area
Try this http://forum.xda-developers.com/showthread.php?t=755903
After that, test if you can get to fastboot or hboot (fastboot: back + power, hboot vol down + power). Then report back and search the forum for further help on restoring your device with new SPL & radio & recovery & ROM
Otherwise, if these won't work you could try JTAG.
Hope this helps,
kanttii

Broken recovery image, need help fixing

Hi,
First off these forums have been a huge help since I first rooted my Magic back in August. So, a big thank you to everyone to begin with.
I tried scanning the forums to solve this new problem I'm having, but I've lost my Amon RA recovery installation and want to get some explicit help since I know if I do this wrong I'll be bricking my phone.
Here's my setup:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009 19:06:41
CyanogenMod 5.0.7 final
I had Amon RA installed up until today - an old version (around 1.3 I think) and since CM 5.0.8 was available via ROM Manager I thought I'd give that a try. But ROM Manager made me install Clockwork Recovery, overwriting Amon RA, and the installation of Clockwork failed or something. When I try to boot up into recovery, it just hangs at the green MyTouch screen.
I read the installation notes for Amon RA 1.7, but I could use some advice on how to do this without winding up with a brick. I can still boot into CM 5.0.7, but without a recovery image I don't think I'll ever update anything again since I can't do backups/restores.
The three installation options for Amon RA are:
- via fastboot: Can't use this, I don't think I have an engineering SPL.
- via adb: Can't use this, I can't boot into recovery at all
- via terminal: The BIG BOLD WARNING about not using this on CM 5.0.7 is pretty scary.
Can anyone help a brother out here? I'm stuck.
Thanks very much in advance for any suggestions or hints.
raybez said:
Hi,
First off these forums have been a huge help since I first rooted my Magic back in August. So, a big thank you to everyone to begin with.
I tried scanning the forums to solve this new problem I'm having, but I've lost my Amon RA recovery installation and want to get some explicit help since I know if I do this wrong I'll be bricking my phone.
Here's my setup:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
May 27 2009 19:06:41
CyanogenMod 5.0.7 final
I had Amon RA installed up until today - an old version (around 1.3 I think) and since CM 5.0.8 was available via ROM Manager I thought I'd give that a try. But ROM Manager made me install Clockwork Recovery, overwriting Amon RA, and the installation of Clockwork failed or something. When I try to boot up into recovery, it just hangs at the green MyTouch screen.
I read the installation notes for Amon RA 1.7, but I could use some advice on how to do this without winding up with a brick. I can still boot into CM 5.0.7, but without a recovery image I don't think I'll ever update anything again since I can't do backups/restores.
The three installation options for Amon RA are:
- via fastboot: Can't use this, I don't think I have an engineering SPL.
- via adb: Can't use this, I can't boot into recovery at all
- via terminal: The BIG BOLD WARNING about not using this on CM 5.0.7 is pretty scary.
Can anyone help a brother out here? I'm stuck.
Thanks very much in advance for any suggestions or hints.
Click to expand...
Click to collapse
Try holding down the menu button while booting your phone up.
Keep holding until it starts to boot or for at least 30 seconds or so.
Make sure you flash the appropriate recovery. Did you have Amon_Ra G or H version prior to clockwork?
Binary100100 said:
Try holding down the menu button while booting your phone up.
Keep holding until it starts to boot or for at least 30 seconds or so.
Make sure you flash the appropriate recovery. Did you have Amon_Ra G or H version prior to clockwork?
Click to expand...
Click to collapse
What is Menu+Power supposed to do when booting? I tried and the phone just booted up normally.
If I hold Home+Power which used to boot me into Amon RA (it was ~1.3G btw) the phone just sits at the green MyTouch bootimage screen.
Booting into fastboot via Back+Power works normally. If I had the right SPL I'd be set.
I guess the big question is, is installing Amon RA via terminal on CM5.0.7 possible yet, or are the memory problems kernel related and unavoidable without an upgrade?
raybez said:
What is Menu+Power supposed to do when booting? I tried and the phone just booted up normally.
If I hold Home+Power which used to boot me into Amon RA (it was ~1.3G btw) the phone just sits at the green MyTouch bootimage screen.
Booting into fastboot via Back+Power works normally. If I had the right SPL I'd be set.
I guess the big question is, is installing Amon RA via terminal on CM5.0.7 possible yet, or are the memory problems kernel related and unavoidable without an upgrade?
Click to expand...
Click to collapse
The problem is supposedly fixed in 5.0.8. I've personally had a couple of issues flashing the Clockwork Recovery where the recovery would seem to flash alright but it would just hang at the splash screen. I found that if you held the Menu button while pressing the power button will allow the device to boot. Afterwards, if you flash the SAME recovery a second time it will work 99% of the time.
An alternative solution would be to use the goldcard method.
Create a nandroid backup before starting
Create your goldcard (if you don't already have it from your previous rooting process)
You should now have SHIP-S OFF. This will allow you to use fastboot.
Fastboot flash the latest radio again just in case (don't want to risk bricking).
Fastboot flash your recovery (1.7.0G)
Fastboot flash your stock hboot (spl)
Reboot while holding the home button and you should be looking at your new recovery.

[Q] Cannot get into recovery mode after rooting by using super one click method

Hello all,
I have been using the super one click method to root my HTC Magic Saphhire 32A.
It works well so far albeit need to alter some SU files in the program. Running of terminal emulator with the command prompt SU confirmed that I have the superuser rights.
Now the problem is whenever I use ROM manager to reboot in recovery, the phone restart, HTC logo shows, then the next screen I see is a big asterisk and a phone image, after this I pressed Home + power, the screen manage to switch to Android system recovery utility, BUT with only 3 options:
1) Reboot system now
2) Apply sdcard:update.zip
3) Wipe data/factory reset
And in the end of the screen, there is one line highlighted in red: E: can’t open /cache/recovery/command
After the phone been rebooted, I switched off the phone. And Pressed vol - with power button, same issue happen too with the asterisk sign shows on the screen. After unrooting it, the phone recovery mode are back to normal with the 3 androids in skates appear on the screen.
Have anyone face the same problem? Any ways to sort this out? I am planning to back up my stock ROM, and wanted to try out some cyanogenmod ROM. I tried Googled and read lots of forum post but left without a solution. Any helps are appreciated! Cheers!
p/s: I am a noob in Android OS. XD
I have the legend and these is a process of booting the recovery from there as update.zip. have you tried renaming the ROM update.zip and flashing it from there?
Sent from my HTC Legend using XDA App
I fiddled with the ROm manger setting by choosing "delete recovery prior to flashing", and now it makes it worse.
I selected "reboot in recovery" in ROM manager and the phone reboot, but just stuck at the HTC start up screen.
I plugged in the phone while trying another recovery reboot, and it still stuck at the HTC screen, but with a red line on the top saying "fastboot USB". Gosh I think i am going no way with this...
E:Can’t open /cache/recovery/command
Same fault here mytouch 3g unlocked at&t 32b downgraded too cupcake and tried
getting E:Can’t open /cache/recovery/command
home and power button down still cant get you in recovery? you cant flash any other working rom?
32b myTouch 3g 2.2.1
Cyanogen Nightly 271
Hboot - 1.33.0006
Radio - 2.22.19.26i
Kernel - 2.6.35.9
ADW 1.3.3
ClockworkMod Recovery
Slideit keyboard
Did you flash custom recovery with ROM manager? Or you just rooted the phone with 1 click method?
Sorry for the late reply. I am just back from overseas business trips. I used Clockmod ROM Manager and did a backup, tried reboot in recovery, and the phone rebooted itself but stuck at the HTC logo now.
I can confirm that the phone is rooted with super user permission.
The reason being the phone didn't manage to get into recovery mode might be due to the missing recovery.img in the phone. Pushing the img file to phone through Clockmod didn't work apparently, so I tried command prompt from PC fastboot flash recovery c:\recoveryxyz.img. It failed too with an error remote failed.
I tried using the terminal emulator in the phone and tried pushing the recovery image again and it didn't happen too. Can some one please help? Cheers!
Download ROM manager and you have option that says install custom recovery it will install Clockwork, and you have flash alternative recovery it installs amon ra's recovery i prefer most
Will try it tonight and revert for the result. Cheers!
I have tried flashing alternate ROM through ROM manager and for once it managed to boot into recovery mode. BUT the device hang right after that, I can't select any of the options and have to pull the battery out to force shutdown.
I tried using fastboot flash recovery *.img remotely through my PC while the phone is in fastboot USB mode, and my command prompt stated FAILED (remote: not allow)
Urgh, I think I might have missed something here... Could some one please help? Cheers!
p/s: my objective is to upgrade my stock ROM android 1.5 to cyanogen ROM. Cheers!
I don't know whether this info helps but here goes:
phone info:
sapphire pvt 32A ship s-on H
Hboot- 1.76.0007 (SAPP10000)
CPLD - 12
RADIO - 6.35.07.29
AUG 4 2009
callmeneotheone said:
I have tried flashing alternate ROM through ROM manager and for once it managed to boot into recovery mode. BUT the device hang right after that, I can't select any of the options and have to pull the battery out to force shutdown.
I tried using fastboot flash recovery *.img remotely through my PC while the phone is in fastboot USB mode, and my command prompt stated FAILED (remote: not allow)
Urgh, I think I might have missed something here... Could some one please help? Cheers!
p/s: my objective is to upgrade my stock ROM android 1.5 to cyanogen ROM. Cheers!
Click to expand...
Click to collapse
OK here is the thing did you chose right model of your phone? HTC magic is 32A and mytouch and something else is for 32B you maybe flashed the wrong one?
Thanks WoblyGoblin for taking your time to help. Yes, I have selected the correct phone model. I chose HTC Magic.
Did you install the recovery?
Sent from my HTC Magic using XDA App
I am stuck in trying to install recovery img into the phone. can't boot in recovery mode, tried ROM manager and remote push of recovery img into the phone.
Please refer to the previous post for more info. Cheers!
Ok here is the solution for you use this guide but download this apk and this recovery.
If you dont have 1.5 android but 1.6 download Terminal emulator from market and when you start it type first:
su
flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
Hello mate,
i just tried the method and I am stuck at FlashRec backup recovery image step.
I clicked on backup recovery image, but there is a command prompt that says:" backup FAILED: Could not run command.
FYI, I am running on Android 1.5. On the edge of giving up rooting and loading a custom ROM now and without a MARKET apps on the phone.
callmeneotheone said:
Hello mate,
i just tried the method and I am stuck at FlashRec backup recovery image step.
I clicked on backup recovery image, but there is a command prompt that says:" backup FAILED: Could not run command.
FYI, I am running on Android 1.5. On the edge of giving up rooting and loading a custom ROM now and without a MARKET apps on the phone.
Click to expand...
Click to collapse
Did you try terminal emulator app?
And commands that i gave you?
yes mate, have tried flash_image recovery command from the terminal app and tries to restart in recovery without any result.
I have did a few research and read up and found out that I am stuck with the south east asia Magic model without the google based support, with no market apps and it is perfected SPL.
Quite upset by it. LOL!
callmeneotheone said:
yes mate, have tried flash_image recovery command from the terminal app and tries to restart in recovery without any result.
I have did a few research and read up and found out that I am stuck with the south east asia Magic model without the google based support, with no market apps and it is perfected SPL.
Quite upset by it. LOL!
Click to expand...
Click to collapse
Try this

help with cyanogen Rom upgrade from 5.0.7 to 6.0.0

I have a rooted mytouch original with cyanogen 5.0.7/android 2.1 and want to upgrade to cyanogen 6.0.0/android 2.2.
Can I just install the new rom, or are their prior steps to prepare for this.
Thanks
DAve
Check CM wiki.. all the info is there!
yes, I had already read through the cm wiki before posting. I just read through it a second time, though the specific question that I had asked was not addressed as far as I could tell. Don't want to flash a new rom without first knowing its the right step to take. So if someone doesn't mind answering the question...
Just do a nandroid backup. Then you flash the CM 6 over the old one, do a cache+dalvic wipe and start it up.... It should be ok.
If not, then just revert back with the knowledge that you have to do a complete wipe, meaning that you need to start from scratch.
I now have initiated flashing new rom, starting with backing up data and wiping cash. However, I am now unable to go into recovery mode, whereas the phone is stuck on the logo when attempting to do so. I had installed through rom manager clockworkmod 2.5.0.1, got the message it installed correctly.
Here are the methods I have used to go into recovery:
1. click on "reboot into recovery"
2. backup current rom
3. flash alternative recovery with RA Recovery v.1.7.OH downloaded by rom manager, and use rom manager to restart into recovery mode
4. turn phone off, try to press home and power button together, for the new RA and the new clock work mod programs.
will not go into recovery mode, gets stuck on the boot up logo. Phone otherwise works fine, on the older Cyanogen Rom..., just can't go into recovery mode which I need to do to upgrade.
My original recovery was RAv1.2.0G.img, but this was I assume replaced by the rom manager.
In case this is important, my other software versions I have been using the past year:
Hboot 1.33.2005 (sapp30000), Cpld 10, Radio 2.22.19.261
will not go into recovery mode, gets stuck on the boot up logo. Phone otherwise works fine, on the older Cyanogen Rom...
any suggestions?
You flashed wrong recovery version...
You need RA Recovery v.1.7.OG and not H as stated above.
If all ****s up, then use my guide (check my signature) to flash a custom recovery... just skip the steps about root since you already got that!
Remember, G and NOT H.
lost recovery
mumilover
I do actually have v.1.7.0G installed, not H (my bad).
it just will not go into recovery.
Please let me know where your guide is, but right now I have been unable to communicate with my device through my xp desktop, get the "device not found" error (I assume you are suggesting that). Not sure how this will help though, since I already seem to have the correct recovery image installed.
Any help you can offer would be appreciated.
Dave
mumilover said:
You flashed wrong recovery version...
You need RA Recovery v.1.7.OG and not H as stated above.
If all ****s up, then use my guide (check my signature) to flash a custom recovery... just skip the steps about root since you already got that!
Remember, G and NOT H.
Click to expand...
Click to collapse
Download my fastboot commander (CHECK MY SIGNATURE, magic version).
Restart into fastboot mode.
Download this recovery image:
http://rapidshare.com/files/387932919/recovery-RA-sapphire-v1.7.0G.img
Using the tool and your eng spl, you can just flash the recovery image on the phone.
Just use the first tab -> recovery button -> navigate to the above image -> click "flash recovery". Done.
Restart into recovery by home + power combo.
You could also try this command:
Code:
adb shell reboot recovery
to force it to boot into recovery from the system.
[Problem is fixed. Thanks for your help.
I used my mac bootcamp (could not get sdk to run on my desktop or mac), and could find my device through adb. Then I pushed a separate version of the RA 1.7.0 G (the one the came with rom manager did not work!) to my phone via flash command. Voila, I am now able to go into recovery mode. 6.0 is installed and running.
QUOTE=mumilover;10252460]Download my fastboot commander (CHECK MY SIGNATURE, magic version).
Restart into fastboot mode.
Download this recovery image:
http://rapidshare.com/files/387932919/recovery-RA-sapphire-v1.7.0G.img
Using the tool and your eng spl, you can just flash the recovery image on the phone.
Just use the first tab -> recovery button -> navigate to the above image -> click "flash recovery". Done.
Restart into recovery by home + power combo.
You could also try this command:
Code:
adb shell reboot recovery
to force it to boot into recovery from the system.[/QUOTE]

can't access to recovery after flashing clockworkmod recovery

Hi. I have a rooted HTC Magic 32A. I recently downloaded Clockworkmod recovery through ROM Manager and flashed it. After reboot, i can't access to recovery and when i boot to the rom it gets stuck on the animated android logo. I tried flashing old recovery and still have the same issue. Can someone please help me?
My phone specs:
Sapphire PVT 32A ENG S-OFF H
HBOOT 1.76.2007 (SAPP10000)
CPLD-12
RADIO 6.35.10.18
it will take a while to load this first time. If not, take the battery out for a min, put it back in and boot using the traditional buttons (home and power). Hope it helps
i personally recommend amon ra recovery for this phone
popimp315 said:
it will take a while to load this first time. If not, take the battery out for a min, put it back in and boot using the traditional buttons (home and power). Hope it helps
Click to expand...
Click to collapse
I waited like an hour, but it didn't boot to the rom. It was stuck on the android screen. I also can't access to the recovery with home+power buttons, it boots automatically to the rom, which gets stuck.
popimp315 said:
i personally recommend amon ra recovery for this phone
Click to expand...
Click to collapse
I wanted to try the Clockworkmod recovery, because it gets so much praise. I guess i was wrong. I tried flashing back my old recovery which is the amon ra recovery, and still have the same issue.
sevag00 said:
I waited like an hour, but it didn't boot to the rom. It was stuck on the android screen. I also can't access to the recovery with home+power buttons, it boots automatically to the rom, which gets stuck.
I wanted to try the Clockworkmod recovery, because it gets so much praise. I guess i was wrong. I tried flashing back my old recovery which is the amon ra recovery, and still have the same issue.
Click to expand...
Click to collapse
Clockworkmod isn't compatible with your phone. You need a special recovery as your radio has a different MTD partition scheme. Try this one out.
Sent from my fingers.
Well, stupid me. before you posted. I tried unrooting my device through the HBOOT method using the sappimg.nbh and i got "wrong device id" error. Now my phone has the stock radio and hboot and it is s-on. When i try booting to the rom it get stuck on the vodacom screen. I only have access to bootloader. i don't know what has happened to my phone right now but i just need to root it again somehow, flash a custom recovery. I already have a nandroid recovery of my old rom.
EDIT: I didn't create a goldcard, because i can't boot to the rom, so i don't have access to adb.
sevag00 said:
Well, stupid me. before you posted. I tried unrooting my device through the HBOOT method using the sappimg.nbh and i got "wrong device id" error. Now my phone has the stock radio and hboot and it is s-on. When i try booting to the rom it get stuck on the vodacom screen. I only have access to bootloader. i don't know what has happened to my phone right now but i just need to root it again somehow, flash a custom recovery. I already have a nandroid recovery of my old rom.
EDIT: I didn't create a goldcard, because i can't boot to the rom, so i don't have access to adb.
Click to expand...
Click to collapse
So what's your current fastboot info?
Sent from my fingers.
Sapphire Unknown 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
RADIO-2.22.19.26I
Amon Ra's recovery is the best one for magic. I once tried ClockworkMod but it didn't have as much features as Amon Ra's.
So, do you know how can i get out of this mess?

Categories

Resources