Related
Trying to put my phone into stock mode, so i can download EB13 and one of the process is to type this into my terminal of my Mac. The dome question is cuz i recently change from Windows to Apple and everything changes.
What does this means plz somebody
chmod +x run.sh and run it
I need to uninstall my root and clockworkmod , everything to stock so i can install the new 2.2.1 froyo
Open macs terminal type that...
Sent from my SPH-D700 using XDA App
Art77 said:
Trying to put my phone into stock mode, so i can download EB13 and one of the process is to type this into my terminal of my Mac. The dome question is cuz i recently change from Windows to Apple and everything changes.
What does this means plz somebody
chmod +x run.sh and run it
I need to uninstall my root and clockworkmod , everything to stock so i can install the new 2.2.1 froyo
Click to expand...
Click to collapse
Open the terminal app.
Type cd (directory to the root folder)
Type chmod +x run.sh
Type ./run.sh
Are you on di18 with root? dk28? You provide no information and expect specific answers which Is not possible.
Sent from my SPH-D700 using XDA App
I have DI18 with a clockworkmod, with Mobile Ap , so i can pair my Epic 4g to my Samsung Galaxy tab
Art77 said:
I have DI18 with a clockworkmod, with Mobile Ap , so i can pair my Epic 4g to my Samsung Galaxy tab
Click to expand...
Click to collapse
An aside...
Look, if DI18 works fine for you i'll stay on it. I rushed into EB13 and ran right back to DI18. To be fair, i had nothing wrong with DI18, it worked perfectly for me, i was just curios about EB13 and jumped in. Battery life was horrid and bugs galore plus no Mobile AP only wifi tether.
The same 3500mah battery that gives me 40+ hrs on DI18 (stock, but rooted) would only last half that on EB13 (and i tried several ROMS including the very nice Supernova EB13). Even the stock 1500mah battery lasts me nearly the whole day on DI18, but less than half that on EB13.
Realy!!!! cuz I was thinking of jumping into EB13 , but I have read so many complaints about EB13 that I dont know if too wait for a new version or even 2.3 gingi.... Thanks
I prefered Mobile Ap than tether....
ok , it only shows the name of my computer inside Terminal , i don't know what to type???
this is what i have after i open app terminal
Arturo-Enriquezs-iMac:~ artlyd$
Type cd /directory/where/that/.sh is
Sent from my SPH-D700 using XDA App
can you explain a little bit more , is confusing and frustrated everything is different to windows.....thanks
realy realy realy i have tried typing everything and nothing works it keeps telling me no command or directory
WANT TO ROOT YOUR AUSSIE NEXT G XOOM?
Firstly, I know this is in the wrong section of the forum, but I dont have enough XDA posts to put anything in the developement section. DEAL WITH IT
DISCLAIMER - I am not a developer or active XDA forum poster, I am a forum reader and user. The reason for this post is a lack of information regarding AUSTRALIAN Xoom rooting and updating on XDA (correct me if im wrong). This information is gathered from multiple different sources and I DONT TAKE ANY CREDIT FOR THEIR HARD WORK, nor do I take any responsibility for their instructions. Everything here is their work, however please follow the links for a more up to date process. Therefore take this information with a grain of salt, I have, however, seen it work on 4 Xoom's so far with 100% success. These instructions assume you can use adb, fastboot, and clockworkmod and assume you know that all warranty is voided by doing any of this.
Now, for the nice bit...
Do you have an Australian Xoom with 3G and wondering what to do about Verizon, US, EURO, UK, 3G, 4G, WIFI only, etc?? you want a forum that says OZ dont you? you want to ROOT YOUR XOOM!
Firstly from what I can tell our model is very similar if not identical to the UK model in that they provide 3G (Telstra Next G for us) connection. The US models dont have sim cards and access the network differently, so some of their processes and information will not apply to us, neither will all the UK information. So to save you some time, here is a collaboration of my findings after hours of web searching and flashing, re-flashing, etc.
Step 1 - Root it
[GUIDE] XOOM 3G Euro Root Instructions + Files.
http://forum.xda-developers.com/showthread.php?t=1049901
This link and all associated files work perfectly to root your OZ-Spec Xoom
Step 2 - ClockworkMod Recovery
[Recovery] ClockworkMod 3.0.2.8 Modded for Internal media [UPDATED 5/13]
http://forum.xda-developers.com/showthread.php?t=1074979
Again, this works perfectly, and gives you SD access and a really easy way to flash your OZ-Spec Xoom
Step 3 - Honeycomb 3.1 Update
Step 3
Firstly need to backup some important telstra related files
adb remount
adb pull /system/build.prop build.backup
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
adb pull /data/data/com.android.providers.settings/databases/settings.db-wal settings.db-wal
adb pull /data/data/com.android.providers.settings/databases/settings.db-shm settings.db-shm
adb pull /data/data/com.android.providers.telephony/databases/telephony.db telephony.db
adb pull /data/data/com.android.providers.telephony/databases/telephony.db-journal telephony.db-journal
[UPDATE][HC3.1] Wifi and 3G! Completely Flashable! No Fastboot Needed!
http://forum.xda-developers.com/showthread.php?t=1074609
Follow the link to update your device. After updating, extract the attached zip to your adb.exe folder and run command prompt.
adb remount
adb pull /system/build.prop build.backup ##cant be too safe##
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb push settings.db-wal /data/data/com.android.providers.settings/databases/settings.db-wal
adb push settings.db-shm /data/data/com.android.providers.settings/databases/settings.db-shm
adb push telephony.db /data/data/com.android.providers.telephony/databases/telephony.db
adb push telephony.db-journal /data/data/com.android.providers.telephony/databases/telephony.db-journal
adb push build.modified /system/build.prop
This will get you 3.1 and still working on the Telstra network and thinking its australian again.
Step 4 - Tiamat Kernel
[KERNEL][AOSP][HC3.1] Tiamat Riptide Special Edition 1.4.2 [Update: 5/21]
http://forum.xda-developers.com/showthread.php?t=978013
This is where those kickass quadrant scores come from. Follow instructions per usual for OZ-Spec. Dont forget to flash the new bootloader first.
tada!... a rooted Aussie Xoom running HC3.1 AND Tiamat kernel AND ClockworkMod AND 3G
Thankyou to the originators of the instructions found here.
Followed these same steps yesterday and can vouch that they work great.
Cheers
(Also long time reader, first time poster)
Hi Guys, up to stage 3.1 and not sure what files/info I need to extract?
Cheers
I think that step was supposed to point to http://forum.xda-developers.com/showthread.php?t=1089695 (which is actually the most important page to read)
adamtuba said:
I think that step was supposed to point to http://forum.xda-developers.com/showthread.php?t=1089695 (which is actually the most important page to read)
Click to expand...
Click to collapse
Thanks - had found the info via google search and all working now.
Telstra 3g files
Thanksh for this post it is of grea help. It has allow me to bring my xoom bck from "brick land". The only bit I cant follow is how to get the telstra 3g specific files you mention. n Step 3.1 I cant find anything about extractingfiles
3g files
Does anyone have these Telstra specific files?
which bootloader did you use for the Tiamat kernel?
cheers
Sent from my Xoom using XDA App
Help need ..... I am wondering if anyone out there are able to send me the files to enable 3g on Telstra as described in this post.
My situation is a follows. I have an Australian Telstra xoom and tried one of the 1 click root programs. After much pain and research I now realise 2 things. 1/ this completely stuffed by device, it now hangs at the logo on boot. 2/ even if it did work it is for US networks only. I have worked my way through the posts and have managed to recover the device by fastbooting with the euro boot.img described in this post. Problem is no 3g. This post provides a description of how to extract the Telstra 3g files for the device before it gets trashed. I did not do this. So I am assuming I now need to source these files from someone who has a working Telstra xoom.
Can anyone out these assist......
These are the files I pushed to my Xoom to get it working. Hopefully it helps.
Cheers
thank you very much I will let you know how I go ...
Yahoooooooooo... these files worked a treat, I am now back on 3g. One of the files settings.db-wal has a size of 0 bytes is that right or should it have something in it.
The only problem I have now is wifii is not working... when I look at wifi in settings it says "error" ... any ideas
Glad that helped.
That file was 0 bytes on mine as well. Don't know why the wireless has failed but someone may be able to help otherwise you may need to push the wireless driver/config file back to the tablet. I think the wireless driver was in one of the links at the start of this thread.
Cheers
can anybody link me to these files "telephony.db" (adb push telephony.db /data/data/com.android.providers.telephony/databases/telephony.db)
and "telephony.db-journal" (adb push telephony.db-journal /data/data/com.android.providers.telephony/databases/telephony.db-journal)
i assume this is why mine is not working (stuck at the HC animation loop)
Thank you to all that help me !! My xoom is back to working now have 3g and wifi working fine and I now have a root applied. For anyone that wants a bit of a smoother path (I am sure I will not be the last noob to do this) the attached ZIP has all the required files to root your device or fix it if you have stuffed it up (ie applied a US 1 click root like I did). The telstra 3g files are included.
Follow the intructions I did in the link below and the the final set of commands to push the telstra comms files back. Hope this reduces the pain for someone else !!
http://forum.xda-developers.com/showthread.php?t=1049901
After completing instructions in the link do the following
adb remount
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb push settings.db-wal /data/data/com.android.providers.settings/databases/settings.db-wal (no bites sent)
adb push settings.db-shm /data/data/com.android.providers.settings/databases/settings.db-shm
adb push build.prop /system/build.prop
mdevlin said:
Thank you to all that help me !! My xoom is back to working now have 3g and wifi working fine and I now have a root applied. For anyone that wants a bit of a smoother path (I am sure I will not be the last noob to do this) the attached ZIP has all the required files to root your device or fix it if you have stuffed it up (ie applied a US 1 click root like I did). The telstra 3g files are included.
Follow the intructions I did in the link below and the the final set of commands to push the telstra comms files back. Hope this reduces the pain for someone else !!
http://forum.xda-developers.com/showthread.php?t=1049901
After completing instructions in the link do the following
adb remount
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb push settings.db-wal /data/data/com.android.providers.settings/databases/settings.db-wal (no bites sent)
adb push settings.db-shm /data/data/com.android.providers.settings/databases/settings.db-shm
adb push build.prop /system/build.prop
Click to expand...
Click to collapse
Glad you got it sorted
hmmmm....
Not sure what's going on here. It was all working fine (well, mostly), just the odd 3g dropout after coming off wifi. I tried flashing the telephony files from the euro update thread hoping to fix that, and then no 3g at all. I then thought, what if I pushed the build.prop from watt4's post (I was using just the frankenrom one from euro post). Then , bam. Bootloop. I successfully got into recovery and flashed 3.1 again and it will work, but every time I flash the build.prop from here I get a bootloop.
any ideas anyone?
I've done all of the steps, and everything was working as expected, but after I restarted, it was showing the honeycomb loads screen for ages and ages (stuck?)
Any ideas? It gets past the M Dual Core screen, but then just loops the boot animation.
I've done all of the steps and I can boot into Honeycomb 3.1, but 3G isn't working. It gets stuck at "Searching for service..." while trying to activate.
I'm using the default build.prop, but I tried the frankenrom and my own (using the steps in the post), and nothing works.
Thoughts?
Edit: Fixed it. I reloaded the settings and telephony dbs after pushing the boot.prop and its now found Telstra and successfully using 3G!
abbaskip said:
I've done all of the steps, and everything was working as expected, but after I restarted, it was showing the honeycomb loads screen for ages and ages (stuck?)
Any ideas? It gets past the M Dual Core screen, but then just loops the boot animation.
Click to expand...
Click to collapse
Ok, So I fixed this it seems. It was that bat Build prop causing the boot loop.
However, now it's happening again. I made the mistake of trying a different framework file (which was meant to force the browser into desktop all the time). And it gave me bootloop. So I reflashed 3.1 etc, and tried again. It loaded (without Telstra service again), so again I repushed the frankenrom build prop (which had worked previously) and the connectivity settings. But again bootloop...I can't get my tab to be alive and have telstra connectivity
EDIT: Thought after reflashing I may have been missing the Wipe data/factory reset step, but did the whole process again, and still no luck!
It's so strange! I can get into the OS without Telstra connection, but once I push those settings it boot loops?! Is there anything else I can try?
So guys, what is the latest update, I just got this A500 yesterday and it says no update avil. when I manually check on WiFi.
Right now I am showing
Model: A500
Android ver: 3.0.1
Kernel: 2.6.36.3-00001-g9b3ce2b
Build Number: Acer_A500_1.104.02_COM_GEN1
It seems like I am missing an update, since I can't get Corporate/Activesync mail in E-mail client and I see others saying they received an update last week and it may have been pulled?
Thanks.
xendrome said:
So guys, what is the latest update, I just got this A500 yesterday and it says no update avil. when I manually check on WiFi.
Right now I am showing
Model: A500
Android ver: 3.0.1
Kernel: 2.6.36.3-00001-g9b3ce2b
Build Number: Acer_A500_1.104.02_COM_GEN1
It seems like I am missing an update, since I can't get Corporate/Activesync mail in E-mail client and I see others saying they received an update last week and it may have been pulled?
Thanks.
Click to expand...
Click to collapse
Have you looked at my thread this will fix anybody who has not yet received the 1.141.07_COM_GEN1 update. If it helps give thanks and support good sir. The instructions are pretty straight forward you do need root. Also Euclid's Brother was nice enough to help by making a tool so if you want you can skip the ADB steps.
Crsdr37 said:
Have you looked at my thread this will fix anybody who has not yet received the 1.141.07_COM_GEN1 update. If it helps give thanks and support good sir. The instructions are pretty straight forward you do need root. Also Euclid's Brother was nice enough to help by making a tool so if you want you can skip the ADB steps.
Click to expand...
Click to collapse
What if my current system is never meant to get 1.141.07_COM_GEN1, and then later on I can't update OTA to 3.1 because of the manual upgrade to 1.141.07.
I could see this happening, it happened with the Samsung Epic at one point.
Any way to go back to an old update if need be?
xendrome said:
What if my current system is never meant to get 1.141.07_COM_GEN1, and then later on I can't update OTA to 3.1 because of the manual upgrade to 1.141.07.
I could see this happening, it happened with the Samsung Epic at one point.
Any way to go back to an old update if need be?
Click to expand...
Click to collapse
Yes all you would need is the system.img and the boot.img from your device also acer is updating devices for free that have an update issue. you just have to send it to them. The reason you are not getting the update I would think though is that your kernel is different from the people in the USA since there are 2 different kernel versions. Have you registered with acer through your device?
Crsdr37 said:
Yes all you would need is the system.img and the boot.img from your device also acer is updating devices for free that have an update issue. you just have to send it to them. The reason you are not getting the update I would think though is that your kernel is different from the people in the USA since there are 2 different kernel versions. Have you registered with acer through your device?
Click to expand...
Click to collapse
Yes I have already registered, can I copy the existing system.img and boot.img from the system? If so where are they located? I am already rooted so I should have access to them if they exist.
Thanks.
xendrome said:
Yes I have already registered, can I copy the existing system.img and boot.img from the system? If so where are they located? I am already rooted so I should have access to them if they exist.
Thanks.
Click to expand...
Click to collapse
you can you either need to know how to use adb or get an app called terminal emulator. Either way the steps are the same.
1. Open ADB or Terminal type su hit enter.
2. type dd if=/dev/block/mmcblk0p3 of=/sdcard/system.img (hit enter)
3. type dd if=/dev/block/mmcblk0p2 of=/sdcard/boot.img (hit enter)
4. type dd if=/dev/block/mmcblk0p6 of=/sdcard/flexrom.img (hit enter)
There you go you just backed up your current system
Crsdr37 said:
you can you either need to know how to use adb or get an app called terminal emulator. Either way the steps are the same.
1. Open ADB or Terminal type su hit enter.
2. type dd if=/dev/block/mmcblk0p3 of=/sdcard/system.img (hit enter)
3. type dd if=/dev/block/mmcblk0p2 of=/sdcard/boot.img (hit enter)
4. type dd if=/dev/block/mmcblk0p6 of=/sdcard/flexrom.img (hit enter)
There you go you just backed up your current system
Click to expand...
Click to collapse
Well great.. looks like the SD card slot is damaged..
Put an SD card in, pushed down on it to get it to click and it made a noise like something broke... now it doesn't see the SD card.... lucky me. I bet one of the pins is bent.
Any tutorial's on how to pop the back off?
Look on youtube its not that hard
Sent from my PC36100 using XDA Premium App
Crsdr37 said:
Look on youtube its not that hard
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Well sure enough one of the Micro SD card slot pins was bent all to crap and broken. I took the unit back and did a swap at the store.
Now I am back, I have rooted and backed up those images so I have a good backup.
I guess I am still concerned with flashing the boot/system img files and then running the update.zip for 1.141.07.
I mean, if it was released for the US, why isn't it still being pushed OTA, and if it was pulled for a reason.. then there must be a problem with it?
What is the source for the files in the first post of this thread... - http://forum.xda-developers.com/showthread.php?t=1101859
xendrome said:
Well sure enough one of the Micro SD card slot pins was bent all to crap and broken. I took the unit back and did a swap at the store.
Now I am back, I have rooted and backed up those images so I have a good backup.
I guess I am still concerned with flashing the boot/system img files and then running the update.zip for 1.141.07.
I mean, if it was released for the US, why isn't it still being pushed OTA, and if it was pulled for a reason.. then there must be a problem with it?
What is the source for the files in the first post of this thread... - http://forum.xda-developers.com/showthread.php?t=1101859
Click to expand...
Click to collapse
It has a different kernel if yiu start on step one in my thread it replaces your kernel.so all would be good
Sent from my PC36100 using XDA Premium App
To Crsdr37
Crsdr37 said:
Have you looked at my thread this will fix anybody who has not yet received the 1.141.07_COM_GEN1 update. If it helps give thanks and support good sir. The instructions are pretty straight forward you do need root. Also Euclid's Brother was nice enough to help by making a tool so if you want you can skip the ADB steps.
Click to expand...
Click to collapse
Hi,
I also have the build, 'Acer_A500_1.104.02_com_GEN1', on my Iconia and patiently waited for an update. I guess it will never come?!
I found your thread, but was not able to find the app that would allow me to update without ADB.
Would appreciate any help.
Thanks
Hi all,
I rooted my lady's Nook Touch last night and today she reports a few problems I'd like to iron out.
1st, the physical side buttons for page flipping are dead in the nook books.
2nd, the on-screen keyboard for Android doesn't seem to work correctly. It appears, and I can type, but when I hit enter or "Search" (in Market, Browser, etc.) nothing happens - so I can't use the keyboard at all.
Sorry if these have been posted before, I did a quick search and came up empty-handed...
Hi
Could you be a little more specific?
What software version do you run on your NST?
What root method did you use?
Sorry, forgive my lack of details...
ros87 said:
What software version do you run on your NST?
Click to expand...
Click to collapse
1.01
What root method did you use?
Click to expand...
Click to collapse
TouchNooter 1.6.24 - http://forum.xda-developers.com/showthread.php?t=1132693
Should I try updating to 1.1?
Broken search is a known issue with no known fix afaik.
The dead buttons are news to me, is this with the stock reader?
You should probably do factory restore + reset, update to 1.1 and just wait for a new version of TouchNooter to become available as all your efforts on 1.0.1 will be lost when updating to 1.1 anyway
And as always, do a proper backup before rooting..
Thanks for the info. I did do a backup before I rooted. Here is my file:
$ ls -l | grep -i backup
-rw-r--r-- 1 root 7000 1962934272 Nov 8 22:27 nook_touch_backup.img
Can you point me towards a good guide for restoring?
Or can I just...
Code:
dd if=nook_touch_backup.img of=/dev/<nook> bs=1m
Weaseal said:
Or can I just...
Code:
dd if=nook_touch_backup.img of=/dev/<nook> bs=1m
Click to expand...
Click to collapse
Well done, you can now enjoy a factory fresh NST whenever you want
Yep, just boot with the noogie image and dd it back.
Hey guys,
I'm experiencing some serious case of bricking here. It is most probably caused of accidentally installing wrong .zip file that is actually not for u8800. When i try to go into recovery or regularly boot it up, i see the infamous green screen with blue and red blocks. My only possible interaction with phone could be done by pink screen cuz i think it's working.
Anyway, most of forums i've been on states getting the original image folder and putting the official Android 2.3.5 UPDATE.app to dload folder in my sd card, then booting up or going into download mode (which both do the same thing, starts the update process) without the battery attached and the phone connected to the pc via an USB cable. The only problem is whenever i try this, the update stucks on around 30% of the bar and when this happens, the red light switches on and off more frequently than before indicating there was something wrong with the process.
Am i doing something wrong here? What do you guys have else to offer? There is almost no forum left in xda, modaco and androidhelp that i didn't check out. I'm going to start throwing up threads here. Please help me!
If you can enter pink screen, you can try fullflash :http://forum.xda-developers.com/showthread.php?t=1971266
Ax1qwer said:
If you can enter pink screen, you can try fullflash :http://forum.xda-developers.com/showthread.php?t=1971266
Click to expand...
Click to collapse
I've already come across with these threads before, pointing out the only solution is via linux terminal but currently i have no access to any OS other than Windows. Is there any other way without installing Ubuntu?
dalpus said:
I've already come across with these threads before, pointing out the only solution is via linux terminal but currently i have no access to any OS other than Windows. Is there any other way without installing Ubuntu?
Click to expand...
Click to collapse
You can use linux live CD/DVD. No installation, only boot system from CD/DVD.
Ax1qwer said:
You can use linux live CD/DVD. No installation, only boot system from CD/DVD.
Click to expand...
Click to collapse
I decided to do it using Virtualbox but i had some problems specifying the directory of the .bin file (It's on desktop)
Here is the example command given:
[email protected] ~ $ sudo dd if=/media/Data/u8800/HUAWEI_U8800_FullFlash.bin of=/dev/sdc
My command:
[email protected] ~ $ sudo dd if=/home/myusername/Desktop/HUAWEI_U8800_FullFlash.bin
Am i coding wrong, incomplete or it cannot simply be done in Virtualbox?
dalpus said:
I decided to do it using Virtualbox but i had some problems specifying the directory of the .bin file (It's on desktop)
Here is the example command given:
[email protected] ~ $ sudo dd if=/media/Data/u8800/HUAWEI_U8800_FullFlash.bin of=/dev/sdc
My command:
[email protected] ~ $ sudo dd if=/home/myusername/Desktop/HUAWEI_U8800_FullFlash.bin
Am i coding wrong, incomplete or it cannot simply be done in Virtualbox?
Click to expand...
Click to collapse
Just follow the tutorial.
you must type "of=/dev/device_name" in command
with "device_name" is the device name alocated to the U8800. It can be "sdb", "sdc", "sdd", "sde", etc.
Ax1qwer said:
Just follow the tutorial.
you must type "of=/dev/device_name" in command
with "device_name" is the device name alocated to the U8800. It can be "sdb", "sdc", "sdd", "sde", etc.
Click to expand...
Click to collapse
Hey sorry for resurrecting this thread. It's just that i previously tried everything including linux terminal but it just didn't do it and i brought it to its maintenance service for repairs. You can close this thread now, nothing to discuss here. But before that, could you give me some ROM suggestions to install to my newly working phone. I'd appreciate if you specify the reasons to use them too. You can send it via personal message. Thank you in advance.
dalpus said:
Hey sorry for resurrecting this thread. It's just that i previously tried everything including linux terminal but it just didn't do it and i brought it to its maintenance service for repairs. You can close this thread now, nothing to discuss here. But before that, could you give me some ROM suggestions to install to my newly working phone. I'd appreciate if you specify the reasons to use them too. You can send it via personal message. Thank you in advance.
Click to expand...
Click to collapse
Hi, Now I am using AuroraSP + , very fast, stable and smooth, http://forum.xda-developers.com/showthread.php?t=2295318 very good for daily use.
MIUI V4 is good ROM too, I am going to test it this weekend and use it as my daily ROM http://forum.xda-developers.com/showthread.php?t=2029969
If you like JB, you can try coldblue_´s CM 10.1 http://forum.xda-developers.com/showthread.php?t=2337235 , but the ROM isn´t perfect.
Ax1qwer said:
Hi, Now I am using AuroraSP + , very fast, stable and smooth, http://forum.xda-developers.com/showthread.php?t=2295318 very good for daily use.
MIUI V4 is good ROM too, I am going to test it this weekend and use it as my daily ROM http://forum.xda-developers.com/showthread.php?t=2029969
If you like JB, you can try coldblue_´s CM 10.1 http://forum.xda-developers.com/showthread.php?t=2337235 , but the ROM isn´t perfect.
Click to expand...
Click to collapse
Hello again, did you have time to try out MIUI? What are your impressions?
I am finally in possession of my phone once again since the last time i received my phone back from its technical service, dumbass engineers nulled my IMEI after they fixed bricked ROM problem. After i got it back, i thought i could fix IMEI problem if i switch ROMs and installed AuroraSP+. It was decent but didn't really had time to fully explore it as i immidiately sent it back. And now they installed Android 2.3 firmware again, bah...
dalpus said:
Hello again, did you have time to try out MIUI? What are your impressions?
I am finally in possession of my phone once again since the last time i received my phone back from its technical service, dumbass engineers nulled my IMEI after they fixed bricked ROM problem. After i got it back, i thought i could fix IMEI problem if i switch ROMs and installed AuroraSP+. It was decent but didn't really had time to fully explore it as i immidiately sent it back. And now they installed Android 2.3 firmware again, bah...
Click to expand...
Click to collapse
Hi, my small review is on last page
http://forum.xda-developers.com/showthread.php?t=2029969&page=17